FRM-40734 when calling a foreign function requiring more than 1 dll

I have been experiencing difficulties in calling external DLL functions from SECURSIGN.DLL. This time no peculiar type of parameter is involved, just four varchar2.
A dump file "ifrun60_dump_nnn" is generated by FORMS every time I issue the aborted call to the foreign function.
Inside the form dump file, apart from useless info like Registers and so on, the message: "Could not find Module32First"
I know for sure that SECURSIGN.DLL needs also other DLLs, and that the first foreign function I call, calls other functions in other DLLs. I found that Module32First is a routine within each of the following DLLs:
Cl32
d2kwut32
d2kwut60
I copied all those DLLs in the current work directory along with my FMB/FMX, in ORANT\BIN, in C:\WINNT\SYSTEM.
I modified the PROCEDURE LoadLibrary (part of the FFI-generated PLL code) to load those DLLs along with SECURSIGN.DLL: no problem in loading all the DLLs that I wish, but the error persists.
How can I avoid all that mess and the FRM-40734 error?? Is there a specific problem in resolving the references to other DLLs?
Please notice that - on the same computer - in Visual Basic everything (and the very same call in particular) works perfectly.

I have noticed just now that a dump file having a name like ifrun60_dump_299, is generated by FORMS every time I issue the aborted call to the foreign function.
Inside the form dump file, apart from useless info like Registers and so on, the message:
"Could not find Module32First"
By a FILE/FIND/CONTAINING TEXT I searched all the DLLs, and I noticed that Module32First is a routine that can be found within each of the following DLLs:
Cl32
d2kwut32
d2kwut60
I tried to load those DLLs along with SECURSIGN.DLL by modifying the PROCEDURE LoadLibrary into the FFI-generated PLL code, and I have apparently no problem in loading all the DLLs that I wish, but the error persists, and that dump file is constantly generated, always looking for the "Module32First" routine.
How can I avoid all that mess and the FRM-40734 error??

Similar Messages

FRM-40734 when calling external DLL Function from Forms 6

Even though some answers were given to my previous help request ("Again: Forms 6 and user-defined data types") I wasn't able to solve the problem of passing a parameter of an user-defined type to an external DLL function residing in the SECURSIGN.DLL library (the closest solution was to declare that "composite" parameter using the ROWTYPE clause referencing a custom-made table created just for the sake of defining that perticular datatype).
So I concentrated on SECURSIGN.DLL functions using more trivial data types, like a function requiring just four character strings as parameters.
I generated the necessary PL/SQL support using the FFI.
I discovered that also the simplest calls to external functions fail at runtime with the generic error FRM-40734.
I located the error: it happens just at the moment of calling the function from within the FFI-generated package body. Before that, the DLL is loaded with no problem, the function is correctly registered, and a function handle is regularly returned.
As long as I can regularly issue the very same call with the very same parameters from Visual Basic, I can't understand what's going wrong (ALL the needed DLL are in the same directory as the FMB/FMX forms).
I will greatly appreciate any help that You may be able to provide.

I have noticed just now that a dump file having a name like ifrun60_dump_299, is generated by FORMS every time I issue the aborted call to the foreign function.
Inside the form dump file, apart from useless info like Registers and so on, the message:
"Could not find Module32First"
By a FILE/FIND/CONTAINING TEXT I searched all the DLLs, and I noticed that Module32First is a routine that can be found within each of the following DLLs:
Cl32
d2kwut32
d2kwut60
I tried to load those DLLs along with SECURSIGN.DLL by modifying the PROCEDURE LoadLibrary into the FFI-generated PLL code, and I have apparently no problem in loading all the DLLs that I wish, but the error persists, and that dump file is constantly generated, always looking for the "Module32First" routine.
How can I avoid all that mess and the FRM-40734 error??

Forms hanging after multiple calls to Foreign Function Interface

Hi,
Can anyone help me with this problem. I'm getting a 'FRM-92100:
Your connection to the server was interrupted ... Details ...
Java Exception:java.io.EOFException' error message when i make
two calls to a c share object file using the ORA_FFI package.
Forms will hang with that error message when I call the foreign
function more than once and when the ORA_FFI.LOAD_LIBRARY
function is executed twice.
I've tried using the ORA_FFI.UNLOAD_LIBRARY function at the end
straight after the load library plus my processes and it still
hangs with that error message.
I've got a temporary work around which is not ideal but it
works. I've made another copy of the C shared object file and
renamed it and made my second call to load this library.
I would prefer to have one shared object file and make multiple
calls to it from forms. Any suggestions?
note : running forms 6.0 on three tier architecture with web
browser.

"Mush15" <[email protected]> wrote in
message
news:g7hela$flo$[email protected]..
> Ok the issue is a stack overflow caused by calling the
function
> recursivly.
>
> I have tried creating 2 functions and have each call the
other but still
> recieve a stack overflow.
>
> Any ideas help??
Try incrementing a counter every time you call the function
and decrementing
it on the way out. When you hit 2640 times, stop calling it.

Error when calling SOAP Runtime functions

Hi Guys,
I have a requirement in which i have to consume a webservice and get a response from it but when i consumed the web service and tried to test it i got the below error please let me know solution for this as it is very urgent and also i am very new to web services stuff
Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")
Thanks
shivraj

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Getting   FRM-41029   when calling report from form

Hi
I have following procedure to run the report but its running fine but giving error FRM-41029 when calling the report from the form.
runrep('MATREP,'REPSER','PDF','F:\rec\RepEnt.RDF');
Repid := FIND_REPORT_OBJECT(repobj);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE, RUNTIME);
set_report_object_property(repid, REPORT_SERVER, repserv);
set_report_object_property(repid, REPORT_COMM_MODE, SYNCHRONOUS);
set_report_object_property(repid, REPORT_DESTYPE,'file');
set_report_object_property(repid, REPORT_DESFORMAT,repfor);
set_report_object_property(repid, REPORT_FILENAME,repfile);
rgds
soumya

hi
try something like this.
PROCEDURE sarah ( p_report_name varchar2, vParamValue number ) is
l_param_list paramlist;
l_rep_id      report_object;
l_rep_job     varchar2(100);
l_rep_status varchar(100);
BEGIN
l_param_list := Get_parameter_List('tmp');
IF NOT Id_Null(l_param_list ) THEN
Destroy_parameter_List( l_param_list );
END IF;
l_param_list := Create_parameter_List('tmp');
add_parameter(l_param_list ,'p_num',text_parameter,to_char( vParamValue ));
l_rep_id := FIND_REPORT_OBJECT( p_report_name );
if
     id_null ( l_rep_id )
then
msg ( 'There is no Report ' || p_report_name || ' in form ' || name_in ( 'system.current_form' ) );
raise form_trigger_failure;
end if;
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_OTHER, 'paramform=no');
l_rep_job := RUN_REPORT_OBJECT( l_rep_id, l_param_list );
l_rep_status := REPORT_OBJECT_STATUS( l_rep_job );
WHILE l_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
l_rep_status := report_object_status( l_rep_job );
END LOOP;
WEB.SHOW_DOCUMENT('http://sarah:8889/reports/rwservlet/getjobid'||substr(l_rep_job,instr(l_rep_job,'_',-1)+1) || '?server=repserver', '_blank');
END; then u may call the procedure something like this.
when-button-pressed trigger.
begin
sarah ('REPORT6', :block.item );
end;sarah
Edited by: S@R@h on Nov 30, 2009 9:39 PM

Error when calling SOAP Runtime functions - Please help!

Hi,
Very new to SAP. I just installed SAPNW7.0ABAPTrialSP12 (sandbox server, with default options) and setup the
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/7c623cf568896be10000000a11405a/content.htm">Flight Data</a>.
I wanted to invoke some of the Flight Data functions through SOAP. So I invoked the following URL:
http://localhost:8000/sap/bc/srt/rfc/sap/BAPI_FLIGHT_GETDETAIL?sap-client=000&wsdl=1.1
I get the following error:
The following error text was processed in the system NSP : Error when calling SOAP Runtime functions
The error occurred on the application server hs_NSP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: HANDLE_REQUEST of program CL_SOAP_TRANSPORT_EXTENSN_ROOTCP
      Method: HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_SOAP_HTTP_EXTENSION========CP
      Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
      Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
      Module: %_HTTP_START of program SAPMHTTP
FROM Runtime Error Log:
Runtime Errors                     UNCAUGHT_EXCEPTION
Exception                          CX_SOAP_CORE
     Termination occurred in the ABAP program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCP" -
           in "HANDLE_REQUEST".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 37
          of the (Include) program "CL_SOAP_TRANSPORT_EXTENSN_ROOTCM004".
Does anyone have any ideas on what is going on? Thanks in advance.

Hi,
Have a look at this blog from Michal Krawczyk to find a solution:
The specified item was not found.
Hope this helps,
Grzegorz

Can Function Return more than One Values ??

Hi Experts,
I would like to ask you Can Function Return more than one values. I Used Function with Out and In out parameter and its working Fine..
1. what is harm using Out and In out parameter in function
2. if we can use Out and In out parameter in Function so what is deffernce between procedure and Function.
3. Is there any Other Way Though which we can return more the One values in Function.
Please advice me...
Thanks
Umesh Goel

Yes/No.
You can return multiple value from function. But, in PL/SQL and not in a SQL.
The following examples demonstrate that -
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Mar 28 17:41:15 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> create or replace package glob
2 as
3    b varchar2(20);
4    c varchar2(20);
5 end;
6 /
Package created.
SQL>
SQL> create or replace function test_mul_out(a in number)
2 return number
3 is
4    cursor c1(eno in number)
5    is
6      select ename,job,sal
7   from emp
8   where empno = eno;
9
10    rec c1%rowtype;
11    d number(10);
12 begin
13    open c1(a);
14    loop
15      fetch c1 into rec;
16      exit when c1%notfound;
17       glob.b:= rec.ename;
18    glob.c:= rec.job;
19    d:= rec.sal;
20    end loop;
21    close c1;
22    return d;
23 end;
24 /
Function created.
SQL> set serveroutput on
SQL>
SQL> declare
2    zz number(10);
3 begin
4    select test_mul_out(7777)
5    into zz
6    from dual;
7
8    dbms_output.put_line('Ename: '||glob.b);
9    dbms_output.put_line('Job: '||glob.c);
10    dbms_output.put_line('Sal: '||zz);
11 end;
12 /
Ename: Avik
Job: CLERK
Sal: 3456
PL/SQL procedure successfully completed.
SQL> Regards.
Satyaki De.

Setting up inspection point in a scenario require more than one inspection

Hi all,
Maybe I am still not very clear on the PP-QM conceptu2026 hope you can see my problem on the following questionu2026..
According to SAP in the QM-production environment, we key in ONE inspection point in the task list header level (i.e. either the master recipe, routing, or rate of routing).
Based on the following business scenario which is going to use inspection point for the inspection:
u2022     Time-based intervals (for example, an inspection point every hour or for each work shift)
u2022     Quantity-based intervals (for example, an inspection point for each container)
u2022     Freely-defined intervals (for example, an inspection point each time a tool change occurs)
Since each of the above scenarios require more than one inspection points to be created and to be assigned to the task list header.
Thus, how to accomplish multiple inspection point assignment when the task-list header only allow me to assign one inspection point at a time?
Thanks
YY

Hi guys,
Thanks. However, in the SAP help portal it does said the system allows several inspection points to be assigned to an inspection operation whether it is in routing or recipe.
Therefore, does it means I can assign more than one inspection points in the operation detail level for either recipe or routing if I will to click the u201CNo relationu201D radio button in the u201CQuality Management: Inspection Pointu201D section. (i.e. is this is the right place to allows this assignment)?
For example, on the change master recipe screen at the Operation tab, I highlight one line item (i.e. one operation line item and zoom into this operation line item, I donu2019t see any field box that allow me to assign several inspection points to an operation? Instead, on the u201CQuality Management: Inspection Pointu201D section, there are the following fields appear:
- Insp.pointCompletion dropdown box
- 4 radio buttons on the inspection interval (ie. Time-related, Qty-related, No-relation) and its subseq time and quantity value input box.
- Quan.pt. lot checkbox
- Last Part Lot Assgmt checkbox
Thus, where is the section in the operation overview screen at Master Recipe or Routing level that I can assign several inspection points?
Thanks
YY

Help in using listagg function for more than 8000 char.

Hi Friends,
Need you urgent help in using listagg function for more than 8000 char.
I did the below sample SQL and in "e_orig" and "d_orig" for upto 4000 char it is working fine but I have to use it for more than 8000 char. and it is giving error,
I checked the listagg function is having limitation of 4000 char.
I tried but I am unable to achive this. Can someone provide me a sample example to achive this
select d.dname,d.loc,e.hiredate
,listagg(e.ename,',' ) within group (order by e.deptno) over (partition by e.deptno) as e_orig
,listagg(e.ename, ',') within group (order by e.sal) over (partition by e.deptno) as d_orig
from emp e, dept d
where e.deptno=d.deptno;[ This is my first post, I gone through the guideline for posting a post , and try to go according to that ( I have not pasted here create table and insert as I have used basic table emp, dept for example), please let me know if still I should give this, I will take care from my next post ]
Thanks in advance

Interesting, I didn't know you could do that, but...
BluShadow wrote:
You could write some PL/SQL code that does it all for you, but that would involve loops and would be slow.Well, objects are written in PL/SQL aren't they? And presumably there'll be implicit looping too? So it's not at all obvious that this method will be faster than doing the joining in PL/SQL in memory. The only way to find out is to benchmark them - so I have done that.
I noticed that OP's ref cursor actually only ever retrieves a single record for a bound department number, so I decided the best thing would be to test using a procedure that passes an output string back. I selected all (109) employees and put spaces in to ensure above 4000 characters. I also noticed that as he is using PL/SQL he probably can use a VARCHAR2 type, but just not ListAgg in the query, so I wrote short procedures as follows:
SimpleAggChr     - bulk collect and array processing, VARCHAR2 output
ClobAggPrc     - the custom aggregation method, CLOB output
SimpleAggClob     - bulk collect and array processing, CLOB output
I then wrote a driving script that calls them in the order above and times each call (I like benchmarking so I have my own timing object to make it easy). I then print the lengths for checking, and my object writes the timings to my output table. Running a few times I got varying results, but generally it looks like there isn't a lot to choose between them for performance.
Here's the procedure code:
CREATE OR REPLACE TYPE char100_list_type AS TABLE OF VARCHAR2(100)
CREATE OR REPLACE PROCEDURE SimpleAggChr (x_out OUT VARCHAR2) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggChr;
CREATE OR REPLACE PROCEDURE SimpleAggClob (x_out OUT CLOB) IS
l_enames     char100_list_type;
BEGIN
SELECT first_name || '                                        ' || last_name
    BULK COLLECT INTO l_enames
    FROM employees
   ORDER BY salary;
FOR i IN 1..l_enames.COUNT LOOP
    x_out := x_out || l_enames(i) || ',';
END LOOP;
END SimpleAggClob;
SHO ERR
PROMPT ClobAggPrc
CREATE OR REPLACE PROCEDURE ClobAggPrc (x_out OUT CLOB) IS
BEGIN
SELECT clobagg(first_name || '                                        ' || last_name || ',')
    INTO x_out
    FROM employees
   ORDER BY salary;
END ClobAggPrc;
SHO ERRand the driving script:
SET SERVEROUTPUT ON
SET TIMING ON
DECLARE
l_enames_c1     CLOB;
l_enames_c2     CLOB;
l_enames_v     VARCHAR2(32767);
l_timer     timer_set_type := timer_set_type ('Aggregation');
BEGIN
Utils.g_id := 'Aggregation';
SimpleAggChr (l_enames_v);
l_timer.Increment_Time ('SimpleAggChr');
ClobAggPrc (l_enames_c1);
l_timer.Increment_Time ('ClobAggPrc');
SimpleAggClob (l_enames_c2);
l_timer.Increment_Time ('SimpleAggClob');
DBMS_Output.Put_Line ('SimpleAggChr returned string of length ' || Length (l_enames_v));
DBMS_Output.Put_Line ('ClobAggPrc returned string of length ' || Length (l_enames_c1));
DBMS_Output.Put_Line ('SimpleAggClob returned string of length ' || Length (l_enames_c2));
l_timer.Write_Times;
END;
SET TIMING OFF
SET LINES 150
SET PAGES 1000
COLUMN id FORMAT A30
COLUMN line_text FORMAT A120
SELECT line_text
FROM output_log
WHERE id = 'Aggregation'
ORDER BY line_ind
/and the results:
SimpleAggChr returned string of length 5779
ClobAggPrc returned string of length 5779
SimpleAggClob returned string of length 5779
PL/SQL procedure successfully completed.
Elapsed: 00:00:27.05
LINE_TEXT
Timer Set: Aggregation, constructed at 03 Nov 2011 16:27:07, written at 16:27:35
================================================================================
[Timer timed: Elapsed (per call): 0.02 (0.000016), CPU (per call): 0.01 (0.000010), calls: 1000, '***' denotes corrected
line below]
Timer              Elapsed          CPU          Calls        Ela/Call        CPU/Call
SimpleAggChr          9.84         0.36              1         9.84400         0.36000
ClobAggPrc            9.37         0.32              1         9.37400         0.32000
SimpleAggClob         8.25         0.22              1         8.25000         0.22000
(Other)               0.00         0.00              1         0.00000         0.00000
Total                27.47         0.90              4         6.86700         0.22500
13 rows selected.

Further to requiring more than 3Gig of Memory

I thought users would find this interesting and maybe a person familiar canshed some light on this subject.
I have a 20 minute video with a combo of Pictures/ Sony HDV Video/ Shake and Motion. Producing an IDVD movie works fine however when I try to compress it to "H.264 60 minute default" there is FCP crashing and the compression terminates. In watching the RAM usage I notice a couple of things. First the Page outs are Zero until suddenly after about 6000-8000 frames the page outs grow rapidly and the Green RAM indicator shrink from 2 gigs free to virtually 30-60 megs and the page outs grow to the hunders of thousands. Sometime after this happens the FCP application will crash. Second, I have also noticed that the Compressord shows up from the time I start the process and shows red..."not responding". The Final Cut thread also moves in and out from Not responding. It almost appears as though the Compression processes faster than the computer can handle and then gives up. I Realize I require more than 3 Gigs of Ram but my previous IMAC never crashed doing a similar priocess with 2 Gig or Ram.
MAC PRO Mac OS X (10.4.9) FCP 5.1.4
MAC PRO Mac OS X (10.4.7)

FCP RAM requirements, and for that matter, those of "Pro" apps, far exceed the memory needed for the likes of iMovie. All of the iLife apps are written in a way as to work across the board on Apples product line. The Pro apps are engineered to operate like they should...... capable of using a ton of memory, and expecting it. When they don't get it, they resort to paging to the hard drive. You may be able to "cripple" FCP by lowering the memory usage in Preferences, but why would you use a program with all that horsepower, and not feed it the memory it needs? If it works in iMovie, I would use it until you can add the appropriate amount of RAM the article hatter posted suggests. Just my two cents....
Michael

Ical crashes when I go to a date more than one month forward.

ical crashes when I go to a date more than one month forward.

The extension called Stop Autoplay isn't available from AMO any longer, it was probably pulled by the original author. <br />
http://kb.mozillazine.org/Muting_browser
It looks like it is available here: <br />
http://mac.softpedia.com/progDownload/Stop-Autoplay-Download-31767.html

When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Function with more than one return value

Hi
Please let me know how to write a function with more than one return value and in what scenario should we go for this option.
Thank you

user12540019 wrote:
Please let me know how to write a function with more than one return value and in what scenario should we go for this option.Yes. And the following is the correct approach (using OUT variables is not!) - you deal with the multiple values as a data structure. This example uses an custom (user-defined) SQL data type as the structure.
SQL> create or replace type TXYcoord is object(
2          x       number,
3          y       number
4 );
5 /
Type created.
SQL>
SQL>
SQL> create or replace function fooCoordinate( someParam number ) return TXYCoord is
2 begin
3          -- doing some kind of calculation using input parameters
4          -- etc..
5
6          -- returning the multiple return values as a proper data structure
7          return(
8                  TXYcoord( 0, 0 )
9          );
10 end;
11 /
Function created.
SQL>
SQL> -- selecting the data structure
SQL> select
2          sysdate,
3          fooCoordinate(123)      as XY
4 from       dual;
SYSDATE             XY(X, Y)
2010-02-01 08:49:23 TXYCOORD(0, 0)
SQL>
SQL> -- selecting the properties/fields of the data structure
SQL> select
2          sysdate,
3          treat( fooCoordinate(123) as TXYcoord).x        as X,
4          treat( fooCoordinate(123) as TXYcoord).y        as Y
5 from       dual;
SYSDATE                      X          Y
2010-02-01 08:49:23          0          0
SQL>

Can oracle function return more than one value

Hi All
please answer can oracle function return more than one value
need one schenario
regards

Can any function, irrespective of the language, return multiple values?
OF COURSE NOT!!
So why do you think Oracle will now suddenly do it differently than all other languages? Never mind that it is impossible for a function (a unit/module of code) returning a memory address, to return multiple memory addresses. The machine code that does that, has not been yet been designed/implemented.
I am continually amazed that this question is asked. It is about something so fundamental in almost every single 3rd and 4th generation language... something that is taught right at the start... the definition of what a procedure and what a function is.
Sorry, but I simply cannot pull punches on this subject and smooth it over. There is something fundamentally wrong with your training as a programmer if you have to ask such a question about a function.
And whatever programming skills you build on such a foundation, will be seriously lacking.
I kindly suggest that you get back to the very basics of programming - and review and revisit until you fully understand it. There are no shortcuts in becomming a good programmer.
Message was edited by:
Billy Verreynne

I try try to authorize my first itunes on my computer but a message called that I am authorized more than 5 computer but i dont authorize any computer yet what is my problem?

I try try to authorize my first itunes on my computer but a message called that I am authorized more than 5 computer but i dont authorize any computer yet what is my problem?

Hello I BLACK,
Thanks for using Apple Support Communities.
If you have never authorized any other computers, this computer might be using multiple iTunes Store authorizations. Please follow the instructions in the following article to deauthorize your computer.
One computer using multiple iTunes Store authorizations
http://support.apple.com/kb/HT1206
Take care,
Alex H.

FRM-40734 when calling a foreign function requiring more than 1 dll

Similar Messages

Maybe you are looking for