From and to is not working properly in oracle9i

I am running a reort through a form.where i am using the parameter to show the data.I have used from --to but sometine it is showing the range but somtime it is not picking whole data(range)
I have change in to between it was working for sometime but again it was crezating same problem.
whaT MIGHT BE THE PROBLEM.dOES 9I HAS ANY bugs do i required any patch for that .or i am doing wrong some where.
field are in Vazrchar2 format.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8. 17" MacBook Pro

Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
Apple IS issuing security and other updates for Snow Leopard users.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing it again on my new computer?

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

HT4061 actually i bought iphone 4s in nov 2012 and now its not working properly as the screen goes black ....i lost the bill..is it possible to get another copy of the bill......

actually i bought iphone 4s in nov 2012 and now its not working properly and i lost my bill as well i want to request to get a copy of bill pls.....

You are not addressing Apple here. This is a user to user technical support forum. If you are having warranty issues with the phone, a copy of the bill is not necessary for Apple to check and evaluate the phone. If there is a manufacturer defect, they will deal with it.
What is "not working properly" on the phone. Maybe someone can help and it not be necessasry to be replaced.

Windows 7 Brightness and Function key not Working Properly

i have HP 15-af024AU APU Quad Core A8-7410 - (4 GB DDR3,1 TB HDD) Noteboook and it came with windows 8.1 preinstalled than i installed windows 7 ultimate.
i have problem in Display Brightness i am not able to change Brightness by function key or by manually from windows settings.
2. my Function key are not working properly . all key are fliped whiout holding function key it work as function key. 3. bluetooth is not working when i search for new device not able to find any available discouable bluetooth device. 4. wireless button software is not wokring in windows 7 i already updated my bios that available in drivers support and install alll drivers too properly so please give proper drivers for windows 7 for this product that works perfect.

Sorry that driver didn't work. You can try this graphics driver and if that doesn't work, unfortunately, I won't be able to help you with that issue. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp71253.exe As far as the Fn keys being 'flipped,' I have no idea what you mean by that, or what to do about it. Did you install the software that controls the funtion keys? This package contains the HP System Event Utility, which enables special function keys on supported notebook models to be programmed. For example, HP System Event Utility enables users to press the Fn+ESC keys to view system information. This software works with the supported operating systems. File name: sp71156.exe

Plug and play speakers not working properly after upgrading to Windows 8.1

After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.

@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

CC 2014.2 Illustrator and Photoshop will not work properly on 10.7.5

I have recently download Illustrator and Photoshop CC 2014.2 on my MacBook Pro version 10.7.5.
I notice some of the functions where not working properly. For example Bounding box in Illustrator will not appear for rectangle tool. Color strip on the color box will appear as sold color instead of strips of different colors for me to choose.
I called the Adobe to find out why is this happening and they told me it was because I don't have the latest OS on my MAC. Do to company policy I can't upgrade my OS to the latest version. Adobe send me the link that is not working for two times and need the correct link ASAP.
Can you guys please send me the right link for me to downgrade?
Thank you

Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application? You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Since uploading iOS7.03 my iPhone 4S cannot get WiFi and Bluetooth is not working properly.

Why will my iPhone 4S not work properly since the iOS7.03 upgrade? No WiFi (greyed out, button will not move) and Bluetooth not working.

it's a well known issue.... wifi and bt died in many 4s.... one is mine..

Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
Not sure whats going on.
Worked fine using iOS4.3.5.
Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Wifi sudden disconnection and lock button not working properly on my iphone 4s....... It is under warranty

When using wifi on my iphone,sometimes it disconnects automatically...... And my lock button is not working properly.....
What should i do, my iphone is under warranty....

The Sleep/Wake button is a hardware issue and that's covered by the warranty. I would take it to the Apple Store and see what they can do.
Hope that helps

Cursor arrow gone from solid black to having white lines go through it and trackpad is not working properly in mail and adobe acrobat - anyone know how this could have happened and how to solve it?

Can anyone help me? Concerned that I may have some kind of malware. My cursor arrow and trackpad are behaving strangely, The cursor used to be a solid black arrow but now seems to have horizontal white lines running through it. The trackpad does not function normally either. For example, when I use my trackpad to scroll up and down in mail it sometimes works and sometimes does not. In adobe acrobat it sometimes does not work. In facebook, the cursor does not line up behind the menu keys as it should.
Any one know how this might have happened and how I can stop it?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

No sound and audio device not working properly, T61 vista

I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
All software + drivers regarging the webcam has been completly removed.
System data:
T61, Vista business
Audio chip seems to be a Analog Devices 1984
SoundMax driver version 6.10.1.5510 (latest available from lenovo)

Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop. This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP. The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
Let me know if that works for you.

Wifi and bluetooth are not working properly

When the lappy is situated near any wifi device then only it catches the signals other wise shows no network found.Same as the bluetooth some times get paired up but mostly not and when connected no data can be transferred between devices. some times get connected but for a while only, after it disconnect several times. Iam too much upset .i have bought it only a moth ago and finds this error. all the drivers are installed and working properly. Is this model have this issue ? or i am the only one suffering from it.

>Is it possible to switch the power WiFi module as before?
You have replaced the WLan module and this means that the hardware configuration has been changed. This means that the different module has affected the software functionality.
The new WLan/BT combo card BCM94313HMGB seems to be designed by Broadcom.
From my knowledge most Toshiba notebooks supports the Intel / Realtek or Atheros modules. Therefore I think there could be an compatibility issue between the FN button software and this module.
Maybe you could try to install the Broadcom driver once again to check if it helps, otherwise you have to forego that.

Horrible internet speed and direct tv not working properly

I am having a horrible experience with verizon.
I have had issues setting up appointment times, technicians showing up at wrong times, technicians showing up but not letting us know problems were "fixed", long phone calls with no result and now there is no other way to contact verizon other than calling again which i refuse to do.
we had switched to verizon through a direct tv bundle but our connection appears to be too slow for the tv to work properly. verizon apparently 'fixed' the problem but when i told them it was still too slow according to direct tv, they agreed that the internet needs an upgrade. so why was i given this particular bundle to begin with? shouldn't verizon know what speed works with direct tv? and why do i now have to pay more for an upgrade when i was quoted a price for my bundle (which is why we switched). is this just another way to make us switch over?? and then trick us into paying more money?
I fully believe i should not be charged for something i was not told about to begin with.
so now i sit and wait for my faster speed internet. no technician needs to come out to my house this time supposedly however it will not be ready for another 5 days. when i asked the woman on the phone why i had to wait 5 days if no technician was coming she had no answer.
i will wait and see how it goes, but i am extremely frustrated with every aspect of verizon and am unfortunately fully regretting making the switch.

Hi misskwispie,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

From and to is not working properly in oracle9i

Similar Messages

Maybe you are looking for