From newbie: How to change data source?
To Crystal Reports design forum:
I'm just trying to get to know Crystal Reports. (Version 11.5.8.826) So I used one of the examples in their sample database (a pie chart), and saved a new version with a new name. Now, I'm trying to change the data source, so I can do a breakdown by race based on a query in one of our Microsoft Access databases.
However, when I click on "Database - Set Datasource Location", I get a popup widow saying: "Some tables could not be replaced, as no match was found in the new data source. Please specify the table required for any unmodified tables". And it won't let me use the Access database as my source of data.
I'm hoping there is a way around this problem! It would be nice to adapt a pre-existing report by choosing a new data source, and then making other modifications ... but it's not letting me do it. Thanks much! Regards, --Tom
Tom,
It won't work because the report is looking for data that doesn't exist in the "different" Access database.
Just because they are both Access databases doesn't mean that the query from one db will work on another, completely different, Access db. You've got to start with a new report and a new db with a new query.
The Panda
Similar Messages
-
How to change data source name and context root during deployment
Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
KubaI don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM. -
How to change data source of Universe
Hi,
I have two databases called A_Database and B_Database
Same tables and data are in both the databases.
I created universe U_universe using A_Database. It is working fine
Now I would like to change from A_Database to B_Database in U_universe without affecting any thing in U_universe because tables and data are same.
Please let me know following doubts.
1.How to do above things?
2.if A_Database and B_Database are in different server, how to overwrite data source in the universe
3.if A_Database and B_Database are in the same server, how to overwrite data source in the universe
Thanks and Regards,
ManjunathIn Designer, import your universe, click on File>Paramers or click on parameters icon on the tool bar and change connection used by the universe from one pointing to Universe A to one pointed to universe B.
Also, visit this site : http://help.sap.com/content/bobj/bobj/index.htm
Look for Universe Designer guide. -
How to change data format from MM/DD/YYYY to DD/MM/YYYY
HI,
How can we change data format from MM/DD/YYYY to DD/MM/YYYY in Prompt and Report Level in obiee 11g.
Please help me ont this.
ThanksHi,
In Prompt:
Try using EVALUATE function.
Eg: Evaluate('TO_CHAR(%1,%2)' as character(30),"D5.Times"."Day Date",'DD-MON-YYYY')
Report level:
Try this in the column formula-
Evaluate('TO_CHAR(%1,%2)' as character(30),"D5.Times"."Day Date",'MM/DD/YYYY')
(or)
EVALUATE('TO_CHAR(%1,%2)' AS CHARACTER ( 30 ), "Dim- Date".Start Date, 'MON-YY')
http://108obiee.blogspot.in/2009/03/how-to-change-date-format-mask-in-date.html
http://obiee-bip.blogspot.in/2011/08/customizing-obiee-calendar-display.html
Some other methods.
Metdhod 1:
'Save System-Wide Column Formats' Option
Check this.
http://siebel-essentials.blogspot.com/2010/10/11-obiee-11g-tips-9-system-wide.html?m=1
Thanks
satya -
Hi,
In portal EP6.0
In System Administrator->System Configuration->UM Configuration here in Data Source Tab already data source is assigned to "Read-only microsoft ADS ( Deep Hierarchy ) + Data base". I changed this data source to "Read-only SAP System + Data base" and saved.
But it is giving warninig message saying 'you are not allowed to select dataSourceConfiguration_R/3.xml as Active configuration file. This will lead to inconsistancy'.
How can we change data source?
Thanks in Adv.
GaneshHi Ganesh,
You want to change the configuration to this "Read-only SAP System + Data base" rite ?
Dont change from here -System Administrator->System Configuration->UM Configuration in Data Source Tab
Start the Config Tool by executing j2eeconfigtoolconfigtool.bat.
Switch to Edit mode.
In the tree, navigate to Global server configuration ® services ® com.sap.security.core.ume.service
Here change the value of the property ume.persistence.data_source_configuration to the one you want to apply(for example dataSourceConfiguration_R/3.xml)
Click on "Apply Custom" Save the changes.
Restart the cluster.
This should work.
Let me know if you need any other help.
Thanks,
Samta -
I can not map field after changing data source location
Hi
I have a small problem that I got a report file and database from my customer, after that I setup database, open the file and change data source to my setting. but some filed can not map. The field mapping widonw does not display all field in the table. Of course I have checked the missing fields are existing in the table.
OS:Windows7
DB:Oracle11
CR:XI Release 2
Does anyone have an idea?hi,
In Map Fields window, there is an option "Match Type".
Please Unchek that option, so that you will be able to see all the fields from that table.
Also, while mapping please verify the datatypes of source and target fields.
Regards,
Vamsee -
How to change the source level in java Studio creator
Hi,
I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
Thanks in advance,
Rajesh.Hi!
Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
Thanks,
Roman. -
How to define data-sources-alias.xml to use Oracle data source
Hi,
I created Oracle jdbc Data Source named "MYDS" in Visual Admin. I added the alias = MYDS_ALIAS. I set the Initial Connection to 2. On the Monitor tab, I see a green line running across the screen. The datasource MYDS is connected to the Oracle.
Now, I would like to define "data-sources-alias.xml" to use MYDS.
When creating data-source-aliases.xml it creates the alias by default on ${com.sap.datasource.default} which is the default DB.
I followed the link --> How to point data-source-aliases.xml to another Datasource
and my data-sources-alias.xml is now:
<data-source-aliases>
<aliases>
<data-source-name>$</data-source-name>
<alias>BRANCH50DS</alias>
</aliases>
</data-source-aliases>
The "EAR generatation has finished successfully", but when "Deploy to J2EE Engine", I got the error below:
1) How to define data-sources-alias.xml to use Oracle data source?
2) I found the link (SDA Deployment error) talking about "sda-dd.xml". How to create "sda-dd.xml" and make it use substitution variables "MYDS"
Dec 20, 2005 3:53:41 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[003]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7181 - 630_SP]/>
<!NAME[C:\usr\sap\J2E\JC00\SDM\program\log\sdmcl20051220205339.log]/>
<!PATTERN[sdmcl20051220205339.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
Dec 20, 2005 3:53:39 PM Info: -
Starting deployment -
Dec 20, 2005 3:53:39 PM Info: Loading selected archives...
Dec 20, 2005 3:53:39 PM Info: Loading archive 'C:\usr\sap\J2E\JC00\SDM\program\temp\temp856850022Ear.ear'
Dec 20, 2005 3:53:40 PM Info: Selected archives successfully loaded.
Dec 20, 2005 3:53:40 PM Info: Actions per selected component:
Dec 20, 2005 3:53:40 PM Info: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
Dec 20, 2005 3:53:40 PM Info: Saved current Engine state.
Dec 20, 2005 3:53:40 PM Info: Error handling strategy: OnErrorStop
Dec 20, 2005 3:53:40 PM Info: Update strategy: UpdateAllVersions
Dec 20, 2005 3:53:40 PM Info: Starting: Update: Selected development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28' updates currently deployed development component '50022Ear'/'sap.com'/'localhost'/'2005.12.19.18.39.12'.
Dec 20, 2005 3:53:40 PM Info: SDA to be deployed: C:\usr\sap\J2E\JC00\SDM\root\origin\sap.com\50022Ear\localhost\2005.12.20.15.53.28\temp856850022Ear.ear
Dec 20, 2005 3:53:40 PM Info: Software type of SDA: J2EE
Dec 20, 2005 3:53:40 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 20, 2005 3:53:41 PM Info: Begin of log messages of the target system:
05/12/20 15:53:40 - ***********************************************************
05/12/20 15:53:41 - Start updating EAR file...
05/12/20 15:53:41 - start-up mode is lazy
05/12/20 15:53:41 - com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
at com.sap.engine.deploy.manager.DeployManagerImpl.makeTempEar(DeployManagerImpl.java:3727)
at com.sap.engine.deploy.manager.DeployManagerImpl.makeNewEar1(DeployManagerImpl.java:3695)
at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:523)
at com.sap.engine.deploy.manager.DeployManagerImpl.update(DeployManagerImpl.java:512)
at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:196)
at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:46)
at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:127)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:96)
at com.sap.sdm.apiimpl.local.DeployProcessorImpl.deploy(DeployProcessorImpl.java:67)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.requestRemoteCall(RemoteProxyServerImpl.java:127)
at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.process(RemoteProxyServerImpl.java:38)
at com.sap.sdm.apiimpl.remote.server.ApiClientRoleCmdProcessor.process(ApiClientRoleCmdProcessor.java:81)
at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:280)
at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
at java.lang.Thread.run(Thread.java:534)
05/12/20 15:53:41 - ***********************************************************
Dec 20, 2005 3:53:41 PM Info: End of log messages of the target system.
Dec 20, 2005 3:53:41 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 20, 2005 3:53:41 PM Error: Aborted: development component '50022Ear'/'sap.com'/'localhost'/'2005.12.20.15.53.28':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [MYDS].
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Dec 20, 2005 3:53:41 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Dec 20, 2005 3:53:41 PM Error: -
At least one of the Deployments failed -Hi,
If you remove the $ and braces (as shown below) it will work.
<data-source-aliases>
<aliases>
<data-source-name>MYDS</data-source-name>
<alias>BRANCH50DS</alias>
</aliases>
</data-source-aliases>
Regards,
S.Divakar -
How to change Date format in Prompts.
Hi,
How to change Date format to DD/MM/YYYY in Dashboard Prompts.Kindly let me know.Hi,
try to below ways
1) By using cast fxn you can solve it.
SELECT CAST("YOUR COLUMN" AS DATE) FROM "SUBJECT AREA NAME"
2) This is a known bug get patch Bug 9280334: CALENDAR DD/MM/YYYY PROMPT IN DASHBOARD RETURNING FORMAT YYYY-MM-DD HH:MI:SS from support.oracle.com
3) refer
http://108obiee.blogspot.com/2009/04/changing-date-format-mask-in-javascript.html
Thanks
Deva -
Changing Data Source for command objects
Hi,
My report (designed in CR 10) is running based on the Stored Procedure call using a command object; which is running successfully in the DEV environment. The report data source connectivity is a DSN.
Now i want to switch it to QA environment with different DSN name. When i tried to update the Change Data Source option, it doesn't allows to update the existing command with a new command!!!!
I don't know how to fix this. Could any one of you have idea, pls. share it here???
Thanks
ViswaIf you have same table structure in new data source then you can change the datasource connection.
Follow the steps in this article
KBase Article ID:c2016958
Article refers to:Crystal Reports 10
Symptom
In Crystal Reports (CR) 10, can you change the database connection of an existing command object to use a different database connection without the use of a Crystal Repository?
Resolution
Yes, you can change the database connection of an existing command object to use a different database connection without the use of a Crystal Repository by using the following steps:
====================
NOTE:
You must apply the CR 10 Monthly Hot Fix (cr10win_en.zip) and the CR 10 Database and Export Drivers Monthly Hot Fix (dbex10win_en.zip) before starting the steps below.
You can download these hot fixes at http://support.businessobjects.com/search
====================
1. Open a report with a command object.
2. Go the 'Database' menu and click 'Set Datasource Location'.
3. In the 'Set Datasource Location' dialog box, select the connection for the command object (the connection appears as a cylinder with a plug).
4. In the lower window, select the new connection and log on to the database.
5. Ensure the connection is highlighted for the command object in the top window, and the connection is highlighted for the new command object in the bottom window.
6. Click Update.
The database connection for the command object now changes to use the new database connection information.
Regards,
Raghavendra -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat -
Trying to Change Data Source but is not highlighted
I have a pivot table running with inventory and we are doing a server upgrade so i need to change the path, but the "Change Data Source" button is not lit up and will not let me do this. Anyone know why this might be happening? Thanks!!!
Hi Frank,
We can directly update the existing connection string to connect to new server. Please take a look at the following articles:
Different Ways to Update Data in PowerPivot:
http://msdn.microsoft.com/en-us/library/gg399134(v=sql.110).aspx
How to change the database for your PowerPivot sheet:
http://www.keepitsimpleandfast.com/2011/04/how-to-change-database-for-your-power.html
Elvis Long
TechNet Community Support -
How to change data type of attribute in caf
hi.
this is my problem.
i been added a attribute in an entity service called emloyee. named "Birthday", use the data type "com.sap.caf.core.date".
when i tried modify the entity service, i hit exception about "DST Daylight Saving Time".
because of DST, the date will add an hour such like "1957/04/01 00:00:00.0" to "1957/04/01 01:00:00.0", and com.sap.caf.core.date will throw an exception.
is anyone had same problem like me?
how to fixed it(if passable)?
and, how to change data type?
thanks.Hi Sruthi,
all you need to do on this is open the report go to the parameters, select the parameter that you wish to change and click "Edit". This will allow you to change thefield to a date rather than a date time.
Regards,
Noel -
How to change the source ip address
hi all,
i got the problem that how to change the source ip address when i
get a website's page!
i mean i want to change the source ip address when i access the
remote website, sure i know when change the source ip, i can not get
the result correctly when changing the source ip address, but it is not
important to get the result i just want to send out a "click" event to the website by calling a post method in the site!
does anybody have some ideas?
Best Regards,
Eric GauHere's some code that connects to google and does a get:
import java.io.*;
import java.net.*;
public class HTTPTest {
private Socket sock;
private BufferedReader in;
private BufferedWriter out;
private boolean running = false;
HTTPTest() {
private void go(String site) {
try {
sock = new Socket(site, 80);
in = new BufferedReader(new InputStreamReader(sock.getInputStream()));
out = new BufferedWriter(new OutputStreamWriter(sock.getOutputStream()));
System.out.println("Connected");
out.write("GET / HTTP/1.1\r\n\r\n");
out.flush();
doRead();
} catch (IOException e) {
e.printStackTrace();
private void doRead() {
running = true;
String line;
System.out.println("Read started");
while (running) {
try {
line = in.readLine();
} catch (IOException e) {
e.printStackTrace();
line = null;
if (line == null) {
running = false;
} else {
System.out.println(line);
System.out.println("Socket closed");
public static void main(String [] args) {
String site;
if (args.length > 0) {
site = args[0];
} else {
site = "google.ca";
new HTTPTest().go(site);
}
Maybe you are looking for
-
Why is my PDF size from my InDesign export still large?
I'm doing class project that is a four-page, seven-image document with very little text. The project must be submitted as a PDF under 300 KB. However, when I export the document under the smallest file size preset and with the compression rates down
-
Error while activating info sourcce
hi all, I am trying to load flat file data to Bw. I assigned data source for my info source, and when i am activating info source ,it is giving the folowing error. " Table /BIC/B0002019000 must be created in the database ". Can any one help me out
-
How does one highlight Text in Imail messages
I understand how one uses the "Fonts" of "Colors" Icon on the message dialog box to change the font color of selected text in a message so it stands out, but have NOT FIGURED OUT how one can instead (or in addition) "highlight" the text. By that I me
-
Macbook pro - logic 7.2 au compatibility (plugins)
hello all i would like to know if anyone, please, can give me a hint or any link for compatible AU plugins for logic pro 7.2 (all i can find is AU compatibility list on apple site, but its from year 2004 i think) thanx macbook pro 2.0 GHz Intel Core
-
How to write copa0003 's pbo?
hi,Dear professor: I am trying to add new fields to TC KO01/2/3. I've read the documentation and did not understand. I've already created my fields in the CI_AUFK structure. now I can write the coas-zmenge into the table. but on the user-define scre