Frontrow displaying a podcast that isn't there

Whenever I access Frontrow, and go into my podcasts section frontrow displays a podcast that I no longer have (diggnation small version, replaced it with the HD edition) and it says 1/4 beside it and when I select it, it will show a description for an episode. However, when I go into that folder, it says that there is no content to display. I am confused because I deleted this podcast from my itunes so I thinking it is a problem with my itunes library file. How might I fix this?

Yes, I did migrate a lot of info from the G4, but when I tried to run Myst Revelation, it said the file was corrupt. So I deleted it, and by using the finder, I searched for anything related to Myst and deleted it. But still, when I try to install a new copy from my Myst discs, it says that I already have a version installed that is updated from the version I have? I did get the downloaded update on my G4, but never got to use it on the imac yet. No, there is not a Myst uninstaller. As for the new account, yes I have tried that. There must be a hidden file somewhere that I cannot find. I have checked the library and preferences, but no help. Has me baffled. OS 9 was a lot easier on this problem, but.......

Similar Messages

  • 2008 Mac Pro sees a second monitor that isn't there.

    My 2008 Mac Pro sees a second monitor that isn't there. It's the original ATI 2600 video card, and I'm running Mountain Lion. It says there is a VGA monitor plugged in to the second port, but there is no second monitor. If I connect the cable to the second port on the video card, I get no display at all. This seems like the video card to me, but it started happening after upgrading to Mountain Lion.

    My 2008 Mac Pro sees a second monitor that isn't there. It's the original ATI 2600 video card, and I'm running Mountain Lion. It says there is a VGA monitor plugged in to the second port, but there is no second monitor. If I connect the cable to the second port on the video card, I get no display at all. This seems like the video card to me, but it started happening after upgrading to Mountain Lion.

  • I have a podcast that isn't updating with the weekly podcast.  I called the company that submits them and they say it's on itunes as they have been submitting them. Any suggestions?

    I have a podcast that isn't updating with the weekly podcast.  I called the company that submits them and they say it's on itunes as they have been submitting them. Any suggestions?

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • IMac screen suddenly recognizes VGA display that isn't there? Big problems

    Hello:
    My dad was using his iMac G5 when the display went to a blue screen (detected an external display) and formatted to take up a small amount (10-12 inches) of the 17" screen. As I was writing this, the detect display blue screen again flashed and returned to normal.
    Under display prefs, it listed a VGA display. However, there isn't even an adapter in the adapter port. Does anyone know what is going on here? I live several hundred miles away and it just so happens that I was here for the weekend. I would like to resolve this asap.
    No AppleCare.
    Thanks,
    Tyler

    Sorry to chime in without a solution, only another query along the same lines. I have a co-worker who's imac (24" 2.33 intel) sometimes starts up thinking that there's a second smaller display connected. The first time this happened, the dock didn't show up (she had it set along the right-hand side, it was apparently on the "other" screen), she restarted and it would then show up. A couple of days ago I was doing some updates, restarted, and the dock disappeared again. I noticed that the mouse fully disappeared off the right side. Having seen this behavior when two displays were connected in the past, I went to the display preferences panel and it registered two screens, the main one and a much smaller one on the right side. I clicked the "detect displays" button, which reset it correctly back to a single monitor, thinking issue solved. But this morning the same issue occurred. Easy to fix, granted, but I was hoping there might be a more permanent solution? I don't think there's a single displays preferences file that might be replaced, and I'd just as soon not mess around with pitching the full system preferences file unless that'd be the only solution...
    Thanksmuch in advance, and have a good one!

  • Ipod failing to sync old podcasts that aren't there

    I have a 30GB video iPod. Trying and failing to sync with iTunes on MacBook Pro.
    First of all it says some items in the iTunes library including xxxx were not copied because they could not be found. It then gives a list of OLD podcasts that I can't find in iTunes or in finder.
    It gets so far and then says "attempting to copy to the disk yyyyyy failed. The disc could not be read from or written to.
    However it is NOT an iPod problem. The same iPod will sync fine with iTunes on a windows PC and a Shuffle suffers the same problem with this MacBook Pro.
    TIA
    Dermot
    iPOD shuffle   Mac OS X (10.4.9)  

    What do you mean by old files?   If I am cleaning up a variety of unwanted items I usually put them all into a folder and delete the folder.   Are you talking about Time Machine records?   If so, be very careful how you delete them.

  • Import shows an iPhone that isn't there

    Whenever I open Import panel on Aperture it displays an icon for my iPhone, along with blank tiles for photographs in the import panel, even though my iphone is not connected.
    I have tried re-starting and re-booting to no avail. The "ghost" iPhone still appears.
    If I actually connect my iPhone this also shows up but in this instance I can see the photos in the import panel.
    Is there any way I can get rid of this ghost version of my iPhone?

    Glad to hear it seems fixed (for now). The iPad might have had an affect of the situation, you hadn't mentioned that you also had a iPad connected.
    If you're feeling brave you could try reversing the steps, plug-in both iPhone and iPad then disconnect the phone and see if the phantom phone comes back.
    And while I agree that it is annoying not to get a firm resolution it still beats no resolution at all
    regards

  • How can I remove a tablet device that isn't there?

    In one of our test environments we've got an Xserve running OSX 10.5.6, inside is running Server 10.5 in VMWare Fusion.
    Now, the VM thinks it has a tablet device installed, as is evidenced by the ink tab showing up in system preferences (the host does not have the ink option there). Obviously there is no tablet device installed. The VM was set up by one of our IT guys who has already reinstalled it, noting no options during setup about a tablet device.
    This problem is causing one piece of software to not work in the VM, or at least, the UI doesn't. There are thousands of console messages reading "QCocoaView handleTabletEvent: This tablet device is unknown (received no proximity event for it). Discarding event"
    Question is, how can I remove the tablet device so that this software will start working? I've checked all through VMWare Fusion's options/preferences & couldn't find anything there and Googling has turned up nothing so far.

    a brody wrote:
    Since Mac OS X Server is different from Mac OS X client, I've asked a moderator to move your thread to the appropriate forum.
    Oops, my bad, but thanks.

  • HP client security looking for fingerprintscanner that isn't there.

    Whenever I want to log onto my laptop I have to wait for the fingerprint scanner software to say that my fingerprintscanner isnt there. After that notification I can just log on with my password. My question is: how do I get the software to stop looking for a scanner and take me to the normal login screen immediately? 
    Extra piece of information: if I run the HP client security app I always get the final screen of initialization and cannot change any settings.
    A lot of thanks in advance!

    casimodo
    Welcome to the HP Community Forum.
    Keep in mind that I don't own a business notebook -- I don't run your flavor of Client Security software although I am familiar with the security software that runs on the consumer HP notebooks.
    Please do make sure you have the means to log into your computer prior to removing the program.
    A couple of ideas:
    Before you make any changes:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Caveat:  Windows 8.1 does include its own Native fingerprint Logon software that is NOT dependent on Client Security software.  Removing the Client Security program does not affect the Windows Native Logon software.  Should that software exist and be active on your system, it must be handled differently.  You might easily dissuade both the Client Security and the Native Logon
        Windows key >>type anywhere on the screen  pc > Click on PC Settings >
            Accounts > Sign-in options
    If PC Settings does not stop Client Security from bugging your trip:  If you are not interested in using the Client Security software -- for whatever reason -- then I should think that you could uninstall the program from your computer from Programs and Features.
    If you do not have an extra admin account on the system, you might consider adding one -- you don't need to USE the account -- but it might "save your backside" down the road.  You do not want to be the one who writes in and says, "I am locked out of my computer!"
    Create a User Account with Administrative Privileges – Windows 8-8.1
     Reminder:  An extra admin account will not protect you from the lockup of the bootup BIOS password that happens to so many people.  Locking the BIOS at boot usually only locks out the owner, by the way.  Smiling.
    Once you uninstall any program, Restart / Reboot the computer -- even if the system does not insist upon the reboot -- and log in.  Windows loves a good reboot!
    Click the Kudos Thumbs-Up to show you appreciate the help.
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • New Mac Pro keeps looking for a server that isn't there

    So, I just got my new Mac Pro (Mountain Lion 10.8.2) the other day.  I used MIgration Asssisant to transfer most files from my old Power Mac G5.   Computers were connected thru a hub.
    Then I turned on file sharing on the old machine to get some other info transferred.  I then shut down file sharing, physically disconnecting the hub and connecting the new Mac Pro to my DSL modem with an ethernet cable.
    Now when I boot up the new machine, I get a message
    "There was a problem connecting to the server  'Joe Blow's Power Mac G5'.
    "The server may not exist or it is unavailable at this time.  Check the server name or IP address, check your network connection, and try again."
    I get this message three separate times ove a couple of minutes.
    Under the "Go" button in the Finder menu, I've clicked on  "Connect to server..." and cleared the old mac out of the list.
    What am I missing??
    Thanks

    Common causes of this issue include the following:
    Aliases in the iPhoto, iTunes, or iMovie library pointing to the server.
    Bookmarks in the Preview application.
    See iMovie Troubleshooting: Connection Failed, Server Does Not Exist
    Otherwise, proceed as below.
    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • [SOLVED] Space that isn't there?

    I have come across an odd problem which refuses to be solved, and am afraid to reboot because I am pretty sure it won't come back up.
    There seems to be missing space on my hard drive. I found that both everything.log and kernel.log were taking over 7GBs of space, and deleted them. My filesystem STILL shows that it is full though. I used pcmanfm to total up the amount of space everything was taking (excluding the /home directory since it is a separate partition), and it said I had only 5GBs of data on it. The total size of my partition is 18GBs.
    Anyone have any ideas on what is going on? here is my fstab, in case it helps:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    #/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
    #/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
    #/dev/fd0 /media/fl auto user,noauto 0 0
    /dev/sda1 / ext4 defaults 0 1
    /dev/sda2 /home ext4 defaults 0 1
    /dev/sda3 swap swap defaults 0 0
    Last edited by smartboyathome (2009-10-19 20:22:40)

    Acecero wrote:edit: Although I do notice that sda1 and sdb3 have the same amount partition space. Are they somehow in common?
    I just realized my cats unplugged my external hard drive, so the disk was unplugged without being unmounted first. That is why it is reporting that way.
    running du -sh /* reveals nothing, also. The largest folders, it tells me, are /usr and /var, with 2.4 and 1.5GBs, respectively. I had already taken care of the 7GB logs in /var, so that is why it is no longer a problem. Here is the full output (minus the permission denied stuff), remember that /home is on a different partition:
    4.5M /bin
    17M /boot
    136K /dev
    3.2M /etc
    23G /home
    80M /lib
    16K /lost+found
    20K /media
    4.0K /mnt
    407M /opt
    0 /proc
    4.0K /root
    13M /sbin
    12K /srv
    0 /sys
    1.5M /tmp
    2.4G /usr
    1.5G /var

  • How do I click on a toolbar icon that isn't there to close a tip?

    This box appears on my screen whatever I do, and is proving impossible to remove because the icon, a white 0 in a green 'teardrop' is nowhere to be seen in my toolbars:
    Look for this icon in your toolbar.
    Clicking it lets you see how a website is tracking you.
    Click the toolbar icon now to close this tip.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT1338 I download Adobe Flash but it doesn't install. Each time I encounter something that needs Adobe Flash it tells me I don't have it. I am getting tired downloading it and then it isn't there.

    I download Adobe Flash but it doesn't install. Each time I encounter something that needs Adobe Flash it tells me I don't have it. I am getting tired downloading it and then it isn't there.

    install_flash_player_10_osx.dmg
    install_flash_player_10_osx-1.dmg
    install_flash_player_10_osx-2.dmg
    install_flash_player_10_osx-3.dmg
    install_flash_player_10_osx-4.dmg
    etc to -9
    Those are the ones you downloaded. Ten times, apparently. Since install_flash_player_10_osx.dmg already existed, the next download was appended with -1. The next -2, etc. They'll all be identical, so it doesn't matter which one you use. Though I'd go with the last one as it may be a slightly updated version from the first download, depending on how long ago you did the first one.
    A .dmg file is a Disk Image. When you double click them, they open up a pseudo drive on the desktop. When you open one of these ten items, the Flash installer will appear in a file window. Run it to install Flash. Then close the file window (displaying from the psuedo drive) and then put the "drive" in the trash to dismount it. You can then delete all of those.
    Looks like you also downloaded the Adobe Reader twice. Versions 10.1.2 and 10.1.3. Also Skype, whatever the Thomson thing is, and an unnecessary Flash uninstaller (the Flash installer will put an uninstaller in the Utilities folder).

  • Isn't there a way to display an informational dialog in Acroforms JS?

    I need to display a simple message, perhaps with an "Ok" button
    All I have found is:
      app.alert();
    and
      app.response();
    The first one is too dramatic/scary and the second one too confusing ("What should I type there?")
    Isn't there some plain app.info() dialog?
    TIA,
    -RFH

    Please look at the Acrobat JS API Reference. There are optional parameters for the alert item to set the level (error, warning, question, or status) and the type and number of buttons( OK, OK-Cnacel, Yes-No, or Yes-No-cancel).The 'app.response()' method is used to interactively collect user input and pass it to the JavaScirpt for additional processing within the script.
    You can also use the 'app.popUpMenu()', 'app.popUpMenuExec()', or the 'Dialog' object and the 'app.exeDialog()'. The dialog object can create very simple or complex dialogs windows that can collect a large amount of data on one screen or be used like wizards to guide a user through a complex form.
    All of these items create a pop-up window.

  • As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

  • Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

    Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

Maybe you are looking for