Frustrated - images getting overwritten...

I am working on a non-live site directly through FTP.
I had some images that I wanted smaller.
So I resized the images - took the height and width
statements out of the code - uploaded the images and everything was
fine.
UNTIL - I went and opened the page again in DW. The big
images are back. FTP the smaller ones back over - fixed.
Then the cycle repeats when I open the page in DW.
Somewhere these images are living in their OLD size and
getting rewritten.
This has happened before - hence my extreme frustration.
Can anyone help with this? Or know how it is happening?
Thanks!

Which DW are you using?
> Funny thing about the @ icon - it won't reflect the
correct size if the
> image
> is below 32x32.
As I recall, this happened with DW4 only - is that correct?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"tiger2808" <[email protected]> wrote in
message
news:e62ab9$n3f$[email protected]..
> Great - I get somebody telling me it's not happening...
>
> So I guess my problem is magically solved.
>
> Look - it's happened before - I finally reached my
frustration point with
> it
> and wanted to know why it was happening. But before hand
- as I've done in
> the
> past - I have physicially removed the sizes from the
code. Even restarted
> the
> program.
>
> I did end up solving the problem - <b>I renamed
the files</b>.
>
> Funny thing about the @ icon - it won't reflect the
correct size if the
> image
> is below 32x32.
>
> But I'm probably imagining that too!
>
>

Similar Messages

  • I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    jamestait wrote:
    when I record, my previous track data keeps getting overwritten.
    since you didn't specify, are you recording in a single take?
    http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I am unable to email an image from camera roll. the image gets "stuck". cannot input email address or subject line. am unable to cancel and go back to camera roll

    i am unable to email images from my camera roll. the image gets "stuck". cannot insert email address or subject line. cannot cancel... return to camera roll.
    what to do. i tries taking new picture and sending it in an email... same thing... gets "stuck "
    Waht to do ?

    Hello lohmann8,
    Thank you for providing so much detail about the issue you are experiencing with emailing photos from the Camera Roll.
    The first thing I recommend is quitting and relaunching the applications on your iPhone:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    You can find the full article here:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you are still seeing the same issue after quitting and relaunching the Photos and Camera app, I recommend restarting your phone and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Problem with animated gif image getting displayed

    My problem is that my animated image does not get displayed properly. I am extending JButton and the button already contains a static image. I want to display the animated image over the static one for some reason. If I replace the animated image with a static gif, then there is no problem.
    Here is the code that I am using
    Icon anim = new ImageIcon((new ImageLoader()).getImage("/graphics/busy.gif"));
    // thread to call displayAnim method
    class ColorThread extends Thread {
    ColorThread() {
    public void run() {
    while (AnimFlag) {
    try {
    displayAnim();
    Thread.sleep(400);
    } catch (InterruptedException e) {
    public void displayAnim()
    repaint();
    public void paint(Graphics g)
    super.paint(g);
    int x=5;
    int y=0;
    if ( AnimFlag) {
    anim.paintIcon(this,g,x,y);

    This code is working fine for JRE 1.2 and the animation is displayed. The problem is with JRE 1.3. when there is no animation, neither is there any image getting displayed.

  • My new macbook pro gets stuck. the image gets clowdy and stuck. it is brand new. !!

    i got a brand new macbook pro retina display. the thing gets stuck. image gets clowdy and does not allow me to go on typing. i can not believe. spend so much money and get this. do i give it back or does it have solution?

    Oh Well. Take it to an Apple store to looked at.
    But your topic header said Brand New. 3 months old isn't Brand New.
    Good Luck & Best Wishes.

  • Print Image gets consistently smaller

    Here's a glitch that I can reproduce consistently. If someone has a fix for this (or if this is just a problem on my computer), please let me know. In order to reproduce this, it might help to have multiple printer drivers that you can switch to, although you can do it just by going back and forth between a printer driver and the "Print as PDF" function.
    Open a new page in Pages. Write a word or anything. Highlight some section of it, and insert a comment. Then try to print the page with the comment showing. I find that every time I switch from the default printer that shows up to another one, the image gets smaller and smaller until finally, the page i wanted to print is the size of a thumbnail. This happens even if I switch to "Print as PDF" (I tried this to see if I could bypass the problem and print from a PDF file, but alas).
    If anyone else experiences this and have a fix for it, let me know. (Or let me know if I'm the only one.)
    gy

    You are not alone! I have the same weird problem. In any Pages doc when I highlight/comment on any item (comment appears in grey side bar in doc) and then go to print the page - every time I click any print parameter (page selection/page size/printer etc) in the print dialogue box - it halves the size of the doc in the preview window... and prints it that size! So if I click enough print items, the preview gets so small that my doc is reduced to a dot! This is very annoying! I had to resort to (a) printing an entire 48 page doc to get two 'commented' pages, or taking a screen snapshot and printing from that.
    This is most def a bug.

  • Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

    Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

    Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
    I am using a mac - OSX 10.7.5
    I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
    The contents I am placing are all  Vector - Illustrator files
    But, I wonder about some of the vector files I work with.  Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
    I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight. 
    Your help is very much appreciated. Thank you!

  • Images get stuck in full screen mode

    In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode.  Please help!!

    In Lightroom, images get stuck in full screen mode, i.e. won't go back to develop or grid mode.  Please help!!

  • In Edit mode the image gets distorted as if a graphics card error...

    When I enter edit mode, many times the image gets distorted and is unrecognizable. The image is covered in red or green lines like when a driver or graphic card is having problems. I can view the image if I use the shift key or exit edit mode.
    Have the latest version of both OS and iPhoto. Am considering a complete reinstall of the OS and Software but would like to avoid if possible.

    Welcome to the Apple Discussions.
    Well you can avoid the hassle of re-installing because it won't help. This is a bug that affects some users of 10.6 and iPhoto, Aperture and/or Preview. Currently there is no solution.
    iPhoto menu -> Provide iPhoto Feedback
    and let them know that you too have the issue.
    Regards
    TD

  • Records are getting overwritten in the internal table using Select query.

    Hi All,
    I have following query :
    Loop at i_salesplant.
           select maramatnr mvkeVKORG mvkeVTWEG maraZZCOEAFE maraZZCOEAFEUOM mvkeZZALLPOL
           into corresponding fields of table i_zallocpol from mara inner join mvke on
           mvkematnr = maramatnr
           where MARA~zzobjtype = I_ZZOBJTYPE
             and MVKE~VKORG = i_salesplant-vkorg
             and MVKE~VTWEG = T_VTWEG.
         ENDLOOP.
    My Que : For example lets say first it selects all the records for Sales Org 1000. Next when you select the records for the Sales Org 2000 the earlier records are getting overwritten.
    Please let me know your valuable inputs.
    Thanks,
    Chandravadan

    Hi,
    Thanks alot for the reply.
    I changed query using appending as follows :
          Loop at i_salesplant.
            select maramatnr mvkeVKORG mvkeVTWEG maraZZCOEAFE maraZZCOEAFEUOM mvkeZZALLPOL
             into appending corresponding fields of table i_zallocpol from mara inner join mvke on
            mvkematnr = maramatnr
            where MARA~zzobjtype = I_ZZOBJTYPE
              and MVKE~VKORG = i_salesplant-vkorg
              and MVKE~VTWEG = T_VTWEG.
          ENDLOOp.
    But it is giving error saying " Field "APPENDING" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement. "     
    Please suggest.
    Thanks,
    Chandravadan

  • Deployed Files getting overwritten every time when I do a server restart

    Hi,
    I have deployed a web application in weblogic server. For testing purpose, instead of placing the changed file inside the war our team will change the files directly in the deployed area. Once when we restart the application server, the new files are getting overwritten with the old one. Is there any setting with which we can stop the weblogic server deploying the old war file again?

    Hi,
    I am stopping and restarting the weblogic server through startManagedWeblogic.sh script. I am not using the weblogic console. Some of our application developers directly drag and drop the Units in the Deployed Area for testing Purpose. Even with nostage mode the war file in the upload folder is getting redeployed at the time of server restart.

  • IDoc-Inbound: Partner Number gets overwritten in User Exit

    Hi,
    we have problem that XI won't accept IDoc from sending R/3 because the Partner number gets overwritten via User Exit.
    Instead of Partner PSICLNT010 the partner gets overwritten to SAPPSI. So what do i have to do to make XI accaept this IDoc?!
    We have system PSICLNT010 configured in SLD with logical system name PSICLNT010.
    Because of the problem i changed it to SAPPSI.
    I also refreshed the adapter specific identifiers and did a complete cache refesh - but with no success.
    We still get error "No service for system SAPPSI, client 010 in ID"
    Can somebody help!  What elso do i have to change?!
    br

    Hi,
    This problem can be solved : do these steps ,
    AT your XI System : goto Idx1, create port with name : SAPPSI
    In the port use your RFC Destination name SAME as used in port PSICLNT010.
    Now goto idx2
    upload matadata for your idoc Message in port SAPPSI.
    send idoc from R/3, XI system will pick that idoc.
    your problem is solved now
    Regards,
    Sandeep Kaushik

  • On deployment of one model it's getting overwritten on other existing model

    Hi all,
    I have created 3 models with respect to the requirement from my client side.
    Let the 3 models be x,y,z...
    Since all the 3 models are of same structure only difference being from query side, i have reused the same model (x) for the other two(y,z) and everything was working fine till yesterday as every model was displaying it's own data and changes implemented. But suddenly today any model i deploy among this 3 is getting overwritten on other 2 leaving behind the same format and data.
    What could be the possible reason behind this? and where should i make appropriate measures, so that every model displays it's own respective data and structure.
    Thanks in advance....

    Thanks for the input,
    I have tried with different iView names for all the 3 models but it isn't working.
    Let me put a clear picture of what the problem exactly is....
    I have 3 models (x,y,z). On depolyment of any one model in VC, all the three iViews in the portal displays the same layout and same content as if the iview names are different but is an alias link of the deployed one.
    This case is recursive i.e., on depolyment of any one model it entirely overwrites the link of other two leading to display the entirely same strucutre, contents, output, table size etc.,
    Any input on this problem will be highly appreciated...
    Thanks in advance...
    Vipin

  • Hi, When i install add on Foxtab in FF4 then top left Firefox orange image get dammaged Why?

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/810085]''
    Hi, When i install add on FoxTab in FF4.0 then top left Firefox orange image get damaged from left side and a small white image missing icon appear Why?

    There is a bug report about it not working when tabs are on top. You can use the keyboard shortcut Control+L to go to the address bar.
    An alternative is to use the F6 add-on to restore this functionality - https://addons.mozilla.org/firefox/addon/f6

  • SPOOL GETTING OVERWRITTEN

    Hi
    I have a problem in background job. My report runs every week and the spool is expected to stay for 4 days.
    But after 1 day it gets overwritten by a spool of some other job but the spool number remains the ssame.
    I have set the job correctly with parameters like
    output request - send to sap spooler
    spool retensioon = 4 days
    delete after printing - NO
    new spool request - yes
    do not append print jobs - yes
    Please help.
    thanks

    SAp has strategy od Spool number reuse. The spool numbers for which actual spools are deleted from TSP01 are reassigned automatically by SAP. So Ensure that your spools are not getting deleted by some other job.

Maybe you are looking for