FS00 Matchcode selection with " * "

Hello Guys,
I'm working on ECC6 and I am facing the following issue: I launch the FS00 transaction, I want to display all the GL account starting with 4 so I type 4* in the matchcode, I press enter.... nothing happens ! It would normally display the list of the selected account.
Did anyone already face this issue of the the selection with the " * " character ?
Thanks in advance.

Dear Moulin,
It should display all the records starting with 4... if you give 4*. <b>The popup will ask you for the confirmation. You would need to press enter.</b>
It could be that there are no GL Accounts starting with 4 in the chart of account. Anyways, try searching with 4.
However, you can test the searchhelp in SE11 as well.
Regards,
Naveen.

Similar Messages

Database selection with invalid cursor !

hi experts,
When execute SAP BW processchar, it occur some system error: (sm21)
Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed).
this error occur when apply bw support package 19.
sap notes 1118584 Solution is: Import Support Package 17 . but my support package is 19.
how can i solve this error?
thanks,
xwu.

I am only assuming things, but it might be worth to look closely if you were experiencing an ORA- error during the execution. This could have caused a rollback and thus closed the cursor. Please check the job log, the workprocess trace (dev_wX file) and the system log SM21 and ST22 as well.
Besides that check the oracle alertlog and the usertrace destination.
Best regards, Michael

Database selection with invalid cursor with MaxDB database

Hi Experts,
I encountered the this error:
"Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed)."
We are using bw support package 19 early this month. Previously is working fine but this problem occured from the last 2 days.
We are using MaxDB database.
Really appreciate any speedy responds.

Hi,
We finally resolved the issue.
The solution:
We check the RFC connection test in SM59. There are connection error.
There is an error that related J2EE_ADMIN user.
SO we reset the J2EE_ADMIN id in SU01.
The problem goes away.
Many thanks

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

How to create a link with 2 choices in Xcode: one selected with UICollectionViewController and the other with UITableViewController

Hi
I want to create a app redirecting to my mebsite.This app permit to select a "area" selected on a UICollectionViewController, and an "event" selected with a UITableViewController.
I need to integer both informations on the FinalViewController (called in my app AnnoncesViewController) =>
The fisrst array is selected on CollectionViewController:@"http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=e vents&Itemid=0&ohanah_venue_id=21"
The second array is selected onUITableViewController:@"&ohanah_category_id=1&textToSearch="
The final array must be:http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=eve nts&Itemid=0&ohanah_venue_id=21&ohanah_category_id=1&textToSearch=
How can I integer these 2 NSArray to obtain this result to link to a UIWebView as FinalViewController?
Thank you for your help!!
My App is on Drobox:https://www.dropbox.com/s/43l1p2hj5bqamvn/Carnet%20du%20Jour.zip
Gracefully
RémySpehler

Hi
I want to create a app redirecting to my mebsite.This app permit to select a "area" selected on a UICollectionViewController, and an "event" selected with a UITableViewController.
I need to integer both informations on the FinalViewController (called in my app AnnoncesViewController) =>
The fisrst array is selected on CollectionViewController:@"http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=e vents&Itemid=0&ohanah_venue_id=21"
The second array is selected onUITableViewController:@"&ohanah_category_id=1&textToSearch="
The final array must be:http://carnet-du-jour.com/index.php/component/ohanah/?option=com_ohanah&view=eve nts&Itemid=0&ohanah_venue_id=21&ohanah_category_id=1&textToSearch=
How can I integer these 2 NSArray to obtain this result to link to a UIWebView as FinalViewController?
Thank you for your help!!
My App is on Drobox:https://www.dropbox.com/s/43l1p2hj5bqamvn/Carnet%20du%20Jour.zip
Gracefully
RémySpehler

Delete statement that uses a sub-select with the statement in the cursor

Hi all,
How to write write a delete statement that uses a sub-select with the statement in the cursor?
CURSOR excluded_dates IS
       SELECT TO_TIMESTAMP(report_parameter_value, in_date_format_mask)
      INTO my_current_date_time
      FROM report_parameters
     WHERE report_parameters.report_parameter_id    = in_report_parameter_id
       AND report_parameters.report_parameter_group = 'DATE_TIME'
       AND report_parameters.report_parameter_name = 'EXCLUDED_DATE';
OPEN excluded_dates;
LOOP
    FETCH excluded_dates INTO my_excluded_date;
    EXIT WHEN excluded_dates%NOTFOUND;
    DELETE FROM edr_rpt_tmp_inclusion_table
    WHERE TO_CHAR(date_time, 'mm/dd/yyyy') = TO_CHAR(my_excluded_date, 'mm/dd/yyyy');
END LOOP;
CLOSE excluded_dates;Thanks

Hi,
In such case I think is better to create a view an perform the delete using it. Example (using HR schema):
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create or replace view v_employees as select * from employees where first_name like 'J%';
View created
SQL> select * from v_employees;
EMPLOYEE_ID FIRST_NAME           LAST_NAME                 EMAIL                     PHONE_NUMBER         HIRE_DATE   JOB_ID         SALARY COMMISSION_PCT MANAGER_ID DEPARTMENT_ID
        110 John                 Chen                      JCHEN                     515.124.4269         28/09/1997 FI_ACCOUNT    8200,00                       108           100
        112 Jose Manuel          Urman                     JMURMAN                   515.124.4469         07/03/1998 FI_ACCOUNT    7800,00                       108           100
        125 Julia                Nayer                     JNAYER                    650.124.1214         16/07/1997 ST_CLERK      3200,00                       120            50
        127 James                Landry                    JLANDRY                   650.124.1334         14/01/1999 ST_CLERK      2400,00                       120            50
        131 James                Marlow                    JAMRLOW                   650.124.7234         16/02/1997 ST_CLERK      2500,00                       121            50
        133 Jason                Mallin                    JMALLIN                   650.127.1934         14/06/1996 ST_CLERK      3300,00                       122            50
        139 John                 Seo                       JSEO                      650.121.2019         12/02/1998 ST_CLERK      2700,00                       123            50
        140 Joshua               Patel                     JPATEL                    650.121.1834         06/04/1998 ST_CLERK      2500,00                       123            50
        145 John                 Russell                   JRUSSEL                   011.44.1344.429268   01/10/1996 SA_MAN       14000,00           0,40        100            80
        156 Janette              King                      JKING                     011.44.1345.429268   30/01/1996 SA_REP       10000,00           0,35        146            80
        176 Jonathon             Taylor                    JTAYLOR                   011.44.1644.429265   24/03/1998 SA_REP        8600,00           0,20        149            80
        177 Jack                 Livingston                JLIVINGS                  011.44.1644.429264   23/04/1998 SA_REP        8400,00           0,20        149            80
        181 Jean                 Fleaur                    JFLEAUR                   650.507.9877         23/02/1998 SH_CLERK      3100,00                       120            50
        186 Julia                Dellinger                 JDELLING                  650.509.3876         24/06/1998 SH_CLERK      3400,00                       121            50
        189 Jennifer             Dilly                     JDILLY                    650.505.2876         13/08/1997 SH_CLERK      3600,00                       122            50
        200 Jennifer             Whalen                    JWHALEN                   515.123.4444         17/09/1987 AD_ASST       4400,00                       101            10
16 rows selected
SQL> delete from v_employees where hire_date >= to_date('01/06/1998', 'dd/mm/yyyy');
2 rows deleted
SQL> regards,

No selection with SIGN = 'I'; OPTION 'GE' allowed

Hello All,
I have added an ABAP routine in one of the InfoPackage to filter a field CREATDATE(char,8).
Whenever I am executing the InfoPackage I am getting the following error:-
For sel. field 'CREATDATE', no selection with SIGN = 'I'; OPTION 'GE' allowed
Message no. RSM1607
Through debugging I have noticed that after the EndForm of the InfoPackage filter the Program control goes to a System Program "RSS2_INTERPRET_SELOPTS_DS". All the Selection Options (EQ, BT, GE, GT, NE, LT, etc ) are defined in this program and the program control ignores the 'GE' option code specified in the program "RSS2_INTERPRET_SELOPTS_DS".
if not l_s_so-ge is initial.
        clear l_s_selopts.
        l_s_selopts-sign = 'I'.
        l_s_selopts-option = 'GE'.
        l_s_selopts-single = 'X'.
        append l_s_selopts to e_t_selopts.
      endif.
Can anyone help how to resolve this.
Thank You
Edited by: RACHANA_CG on Sep 27, 2010 2:28 PM

Hi,
I guess in Infopackage filter routine, you can only declare multiple single values or a range i.e technically I EQ & I BT.
Excluding or greater/less functions are disregarded. You can create a dynamic infopackage filter to have all the dates say for the next two years from the start date & run it.
--Akashdeep

Select with no conditions taking long time, too many blocks, pctused?

select * from at_journal;is taking 15 seconds, which is absurd. I have similar situations with other log tables in this system.
(selecting with rownum < 5 and with first_rows hint still takes 15 seconds)
Suspicious parameters:
PCT_FREE 1
PCT_USED 99
(Some other log tables have PCT_FREE 5, PCTUSED 90)
The tables have frequent inserts, once every day all records older than 90 days get deleted.
After computing statistics:
Blocks: 42,304 (seems absurdly high)
Size: 663 Mb
NUM_ROWS: 505,966
After copying data without compression to new table:
Blocks: 3,785
Size: 60 Mb
NUM_ROWS: 505,966
The select on the new table is instantaneous.
On a side note, in general is compression for a table with frequent deletes OK? It seems OK to me.
Storage parameters of table creation script:
PCTUSED    99
PCTFREE    1
INITRANS   1
MAXTRANS   255
STORAGE    (
            INITIAL          64K
            MINEXTENTS       1
            MAXEXTENTS       UNLIMITED
            PCTINCREASE      0
            FREELISTS        1
            FREELIST GROUPS 1
            BUFFER_POOL      DEFAULT
LOGGING
NOCOMPRESS
NOCACHE
NOPARALLEL
NOMONITORING;I imagine that most blocks for the table are empty. In my mind pctused of 99 means most of the block space should be full. I have read several explanations of PCTUSED/pctfree including oracle documentation and it seems pctused of 99 means the block should be 99% full.
Much thanks,
goo

goo wrote:
I imagine that most blocks for the table are empty. In my mind pctused of 99 means most of the block space should be full. I have read several explanations of PCTUSED/pctfree including oracle documentation and it seems pctused of 99 means the block should be 99% full.Hello, you don't give your database version, but if you were using Automatic Segment Space Management you would not need to worry about the PCTUSED setting, and it could be that you already are:
1 select tablespace_name, segment_space_management
2 from dba_TABLESPACES
TABLESPACE_NAME                SEGMEN
SYSTEM                         MANUAL
SYSAUX                         AUTO
UNDOTBS1                       MANUAL
TEMP                           MANUAL
USERS                          AUTO
EXAMPLE                        AUTOAnd if you are already using ASSM, then the PCTUSED is not an issue (PCTFREE still applies, but it's not an issue in your case).
goo wrote:
On a side note, in general is compression for a table with frequent deletes OK? It seems OK to me.Frequent DELETEs could be an issue because they will not reset the High Watermark, though there will not be a performance penalty because of the compression for DELETEs (the record only needs to be located for a DELETE, not decompressed). Your PCTUSED, however, is high enough so that any newly deleted record slots should be quickly reused, but... it depends on how those new records are being INSERTed. If, as Daniel says, the HWM is being effectively bypassed (Direct Path INSERTs, etc.), then the table will grow in size every day, but the volume of records effectively stays just about the same.
Have a look at how the new records are being added to that table, if it's a:
INSERT /*+ APPEND */ INTO tableA
SELECT...Then the HWM is being advanced, and the newly vacated slots from the DELETEd records are not being reused. So the table will continually grow, for roughly the same amount of data, and there'll be a proportionately longer data retrieval time.

How to avoid select with in a loop.

Hi friends,
can any tell how to avoid the select with in a loop for the following code, since it badly effecting my performance. if possible with code
SELECT matnr werks
      FROM marc
      INTO TABLE it_marc
      FOR ALL ENTRIES IN it_ausp_1
      WHERE matnr = it_ausp_1-objek AND
         werks = p_werks
        AND mmsta LE 60.
    SORT it_marc BY matnr.
    CLEAR wa_ausp_1.
    CLEAR wa_tabix.
    LOOP AT it_ausp_1 INTO wa_ausp_1.
      wa_tabix = sy-tabix.
      READ TABLE it_marc INTO wa_marc WITH
        KEY matnr = wa_ausp_1-objek
        BINARY SEARCH.
      IF sy-subrc EQ 0.
      ELSE.
        DELETE it_ausp_1 INDEX wa_tabix.
      ENDIF.
    ENDLOOP.                      " LOOP AT it_ausp_1 INTO wa_ausp_1.
    APPEND LINES OF it_ausp_1 TO it_tal.
IF it_tal[] IS NOT INITIAL.
    LOOP AT t_plan_order INTO fs_plan_order.
      SELECT r~rsnum
             r~rspos
             r~matnr
             r~nomng
             r~meins
             r~plnum
             r~bdter
             r~ewahr
             r~alprf
             r~posnr
             r~baugr
             m~dispo
          INTO TABLE t_resb
          FROM resb AS r
          INNER JOIN marc AS m
          ON rbaugr = mmatnr
         AND rwerks = mwerks
         FOR ALL ENTRIES IN it_tal
         WHERE r~rsnum = fs_plan_order-rsnum
           AND r~matnr = it_tal-objek
           AND r~xloek = ' '
           AND r~werks = p_werks.
      APPEND LINES OF t_resb TO t_tacl.
    ENDLOOP.

SELECT r~rsnum r~rspos r~matnr r~nomng r~meins r~plnum r~bdter r~ewahr r~alprf r~posnr r~baugr m~dispo
          INTO TABLE t_resb
          FROM resb AS r
          INNER JOIN marc AS m
         ON r~baugr = m~matnr
         AND r~werks = m~werks
         FOR ALL ENTRIES IN it_tal
         WHERE r~rsnum = fs_plan_order-rsnum
         AND r~matnr = it_tal-objek
         AND r~xloek = ' '
         AND r~werks = p_werks.
The logic of this select is completely weird. Whcih order of the db-tables should be used, which indexes?
On RESB matnr, werks and xloek are in one index, but rsnum not.
Are the conditions in fs_plan_order and it_tal connected or independent?
It is probably much faster, to leave the fs_plan_order condition away and check it on the result.
SELECT r~rsnum r~rspos r~matnr r~nomng r~meins r~plnum r~bdter r~ewahr r~alprf r~posnr r~baugr m~dispo
          INTO TABLE t_resb
          FROM resb AS r
          INNER JOIN marc AS m
         ON   m~matnr = r~baugr
         AND m~werks = r~werks
         FOR ALL ENTRIES IN it_tal
         WHERE         AND r~matnr = it_tal-objek
         AND r~xloek = ' '
         AND r~werks = p_werks.
sort fs_plan_order by rsnum.
loop at it_tal in wa.
   read table fs_plan_order
          with key rsnum = wa-rsnum
          binary search.
   if sy-subrc eq 0.
     append ...
   endif.
endloop.
Siegfried

How to create VO with multiple dynamic where clauses on select with UNION?

I am trying to implement the View Object for the UNION query that looks like this:
     select a,b,c...
          from t1,t2,...
          where dynamic_where_clause1
     union all
     select a,b,c,...
          from t11,t12, ...
          where dynamic_where_clause2
There are up to 60 input parameters that are used to generate dynamic where clauses. They are actually created by calling PL SQL function.
So far, I was not able to assign both where clauses to the view object. Is there a workable solution for this problem, besides resorting to programmatic View Object?
I understand that recommended way with UNIONs is to wrap both queries into a parent select:
select * from (
     select a,b,c...
          from t1,t2,...
          where ... -- table relationship joints
     union all
     select a,b,c,...
          from t11,t12, ...
          where ... -- table relationship joints
) QRSLT
     where dynamic_where_clause
Unfortunately this approach doesn't work here, since individual selects are producing unmanageable amount of data and resulting query takes forever to complete.

I afraid I would not have any real benefits from using VO if I replace the entire query with every request. Actually, the performance may suffer.
I solved the problem by creating a POJO Data Control and invoking the custom select query from java. Not sure if it is the best approach to the problem, but implementation time is limited and it works.
Actually, this is not the first time I see the need to implement VO with complicated SQL like select with unions and dynamic pieces. It would be nice to find a solution and not resort to workarounds.
Edited by: viksicom on Aug 2, 2012 8:48 AM

I need a report in SAP which allows multiple Profit centers selection with

Hi,
Cany anybody help me with below issue -
I need a report in SAP which allowing multiple Profit centers selection with :
- Profit Center #
- Profit center Name
- Profit center long text
- Profit Center group
- the related PC node showing the BU and the product category group.
Let me know is there any report which can provide us with all this details.
With regards.

Hi,
I recommend the PCA standard drill-down or interactive reports accessible via the follwoing menu path:
Accounting --> Enterprise Controlling --> PCA --> Infosystem --> Reports for PCA
There are several reports which allow entering profitcenter groups or profitcenters.
Long Text is not possible. Makes also no sense to report on Long Text.
Best regards,
Andreas

Product selection with outcome B

Hi all,
I would like to know which item category and schedule line category to be used if I am using outcome B in material determination functionality.
Can anyone help me with this configuration.
Regards,
Beena

Hi,
For product selection with outcome B, The higher level item category is TAX(Non stock item) with schedule line category CX(No inventory mgmt.).
Item category of product selection is TAPS (Std.Item PS) it comes with Schedule line category of PN( Selection without MRP) and PP (Selection with MRP).
These are all standards. If you would like to configure new item & schedule line category that is also possible for particular order type.
Hope, it is useful to you.
Regards,
S.Balaji

Multiple selection with wildcard in WAD

Hello,
How can I do filtering with multiple selection with wildcard in WAD 7 ?
We have this problem in two seperate situation. The first is in the parameter screen where we want to filer the output with two wildcard. The first one we can put on the field and then go to the selection screen but what about the other ????. The second situation is in the report when we want to filter one of the columns with wildcard.
I will appreciate if someone will open my eyes about this.
Ilan

Hello,
you can use the * for wildcards in the BEx Web.
For example 37* -> 370000 up to 379999.
Buy,
André

FS00 Matchcode selection with " * "

Similar Messages

Maybe you are looking for