FSCM: matching business partner and country code
Hello FSCM community,
simple task!? In FSCM i want to find all businesspartners matching a certain country code (e.g. all businesspartners with country code equals 'FR'. Since kna1 doesn't provide the data wanted, there has to be a different table.
Questions:
1. is there a standard transaction to find those BPs?
2. what are the technical / table-/view/...../-names in FSCM to find those BPs by transparent table?
Looking forward to hear from You!
Thanks in advance!
Gunther
Hi,
Look at table BUT020. Here enter the partner number (field PARTNER), where you will get the business partner Address number (field ADDRNUMBER). Input this address number in ADRC table and you will get the country in field LAND1.
There is no one single table from where you will get this information, you will need to build a query.
Cheers.
Similar Messages
-
'Standard Role' 'User' 'Business Partner' and 'Internet User'
hii
Currently I m working on E-Recruitment 6.0 BSP's..
Can somebody explain me....
1)
'Role' 'User' 'Business Partner' and 'Internet User'
Kindly help me undertand the relation between the above mentioned IDs and there creation
2)
I have created Business Partner(External Person) ID using BP(txn)...Kindly let me know how to create the 'Internet ID' and 'PW'
So that I can use it for HRRCF_StART_EXT (BSP)
kindly explian...or mail me any documention related to
E-recruitment to my id [email protected]
Looking for a immediate reply
Regards,
RaghavRole - is the same as the concept of role in R3. SAP Delivers some pre confogured authorisation profiles for some standard roles.
Roles are assigned to user depending on the client's requirement.
Business Partner is the same as BP in CRM. basically, the following will be BPs in ur system:
Each independent user of the recruitment process - as BP Branch.
All third party recruitment vendors as BP Type Agency.
All employees will also be BP in the system.
All external applicants.
You can create internet user using the t code SU05. You can also use the R3 sytem user credentials to log on to the url application by configuring the system to use the SAP login. (this is done thru t code SICF)
Hope this helps. -
Connection between business partner and organisational unit
Hello,
I have a problem with the account integration in cProjects ( error message: Cost/revenue rate X is not valid in organization 00000000 ) and I think that there could be a problem with the treewalk from the business partner to the organisational unit.
I am using the transaction ppome to customize the organisational unit with the employess. Unfortunately I cannot see this connections when I am using T-Code PPSS to do the treewalk. Does someone know which evaluation path is the correct one for price evaluation?
Is it correct that the connection between the business partner and the organisational unit is:
employee <-> bp <-> org. unit? What is a good starting point to search for the gap between this chain?
When and what for is cProjects treewalking for the price? What calculation is cProj doing with it?
Thanks in advance,
VanessaThe problem is solved due an incorrect business partner. So the question is obsolet, thx.
-
Business place and section code substitution
Hi,
We have defined each product line as division and this is defined SAP as business area.
example
Business area
1010 - A Karnataka ,
1020 - A Delhi,
1030 - A Chennai
1040 - B Karnataka
1050 - B Delhi
1060 - B Chennai
Also defined Business Place and section codes as (both are same)
KA01 - Karnataka
DE01 - Delhi
CH01 - Chennai
So we have multiple business place.
Can I substitute business place/section code based on the business area.
example for Co code XXXX, and accont type = K, and business area = 1010, then substitute business place / section code as KA01 and so.
I have heard that we can subsitute only when there is a single bus. place to be defaulted... let me know if we can do it with the multiple business place as well.
i guess we can maintain a custom table having business area and business place/section code... and default the relvant business place/ section code based on business area through an EXIT.
pls advice
rgds, GSHi Takashi-san,
I would like to ask for your reference in regards to the issue I got from my current project.
I activate the business place function for country Vietnam
Then, create 2 business places (XX01 and XX02).
Then, do the mapping for sales office and plant
XX02 = XXP2 (sales office - we define 1 sales office only)
XX02 = XXF2 (plant - we define 1 plant only)
Then, for sales/billing posting, the business place XX02 is updated accordingly following the sales office
But at the MIRO transaction, the business place XX02 doesn't populate/derive from the mapping table above.
I was trying to use the substitution function to update with below information but unluckily that BUPLA(Business Place) filed is not substituted
Substitution: Local susbtitution for business place
Prerequisites:
If BKPF-BLART = 'RE' AND BSEG-HKONT = 'XXXXXXXXXX' AND BSEG-BUPLA = ' '
THEN FILL BSEG-BUPLA = 'XX02' AT LINE ITEM WHERE BSEG-HKONT = 'XXXXXXXXXX'
Can it be possible to use the user exit here?
Thanks,
Hai -
Difference between Business Partner and Customer in ISU?
Is there any difference between business partner and customer in ISU?
if yes then wht?Hi,
Yes Business Partner is a broad term used in ISU for various roles. A business Partner can be a Customer for company, an employee or even a vendor.
It depends on what role business partner has been given. Initially by default all Business Partners are assigned a default role "Business Partner (Gen.)". Later it can be changed to any role like Employee, Vendor, etc.
Business Partner with role "Contract Partner" is normally the end Customer which I believe you are referring to.
For more info on Business Partner, please check below link:
[Business Partner Master Data|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABP/CABP.pdf]
Thanks.
Ravi -
Difference between Business Partner and Customer Master repository
What is the difference between Business Partner and Customer Master repository ?
Is the Business Partner repository to be used in case CRM is also in landscape ? or Customer master repository is good enough ?
SandeshHi,
If the landscape has both CRM and SAP ECC a business partner repository model should be good.
If it has ECC alone.a Customer Repository is needed.
But when there are many legacy systems which also contains master data fields, the standard business repository provided by SAP wont provide a good solution as it wont cover the legacy master fields..In this case its better to go for a customized repository and you can use the standard repository as a reference.
Thanks -
Mapping between Business Partner and BDoc type BUPA_MAIN
Hi Experts,
When creating a business partner system automatically generates BUPA_MAIN as its BDoc type.
Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN.
I mean to say how BUPA_MAIN(BDoc type) is getting triggered while creating business partner.
Maximum points will be rewarded.
Thanks in advance
Nadh.RHi Nadh,
This is done in SMOEAC transaction where you assign the subscription and replication objects.
You go to SMOEAC and select the object type as Subscription and click on display icon and it displays the subscription ALL Business Partners and when you click on this or expand you find publication and when you expand this you find replication objects and against this you find the BUPA_MAIN bdoc type.
Hope this helps and if so please reward points.
Thanks
Srini -
Relation between Business Partner and User
Hi everyone.
Where can i found the relation between the business partnes and user in the tables of CRM application.
Thanks.
Mauricio N.But in the database where is located this data, which is the table in the database that has the relation between business partners and users???
Thanks,
Mauricio N. -
How to enter Business place and section code of already posted documents
Hello All,
We have some posted documents from month of July, in which user has not entered business place and section code
Please tell me how to enter business place and section code in these posted documents..
I have already searched on other links, but were not useful..
Thanks...Hi
Can you share the screen shot and message no for the error? Also check if you have specified the actual MIRO Document No and not the FI Document No of MIRO Document.
regards
Sanil Bhandari -
How to required Business Place and Section Code in FB60 screen
Dear Guru
Please guide me how to required Business Place and Section Code in FB60 screen. in SAP
Regards
Tapan MaityHi Tapan,
Theer are various discussion over this issue . You can apply validation specific to transaction code as well as on the document type.
Hope this would help you.
Regards
Pankaj P -
Korea - Business Place and Section Codes
Hello Gurus
Apologies in advance for what could be a niaive question.
We are implementing basic FI functionality for our Korean office, but have been told that a 3rd party will still produce the tax returns.
With this in mind, is there anyway we can "switch-off" the need to enter Business Place and Section Codes? Any other workaround will be considered. I'm not fussy.
Thanks
IanAnybody help?
-
Need to update the business place and section code for the advances
Hi,
I need to update the business place and section code for already posted advance payment requests (f-47), advance payments (f-48) and clearing documents (F-54).
I can able to update the business place and section code for only invoices those are coming from MM route in J1INPP.
guide me
sateeshHi ,
Please follow the below point as per note no 640231
2. Path : Transaction SM31 . Enter the table name as TRWPR and press
Page 2
maintain .
a) Delete all entries linked to component ZIND if they are present.
b) Check that, entries as specified below exist for Component IND.
Business
Tran. Time No Component Function Module
DOCUMENT CLOSE 043 IND J_1I6_UPDATE_BA
DOCUMENT CLOSE 044 IND J_1IEWT_UPDATE_SECCO
DOCUMENT PREREV 810 IND J_1I6_CIN_DOC_PREREV
DOCUMENT CLOSE 810 IND J_1I2_COPY_TO_LOCAL
RABELEG ERGAENZE 810 IND J_1IEWT_COPY_BUPLA_FBZ
BELEG POST 810 IND J_1ITDS_TABLE_UPDATE
DOCUMENT CHECK 810 IND J_1I6_VALIDATE_GR
DOCUMENT POST 811 IND J_1IEWT_UPDATE_PROVISION
BELEG POST 811 IND J_1IEWT_UPDATE_PROVISION
BELEG CLOSE 820 IND J_1I2_COPY_TO_LOCAL
DOCUMENT CHECK 820 IND
J_1I6_VERIFY_GR_EIC_QUANTITY
DOCUMENT CLOSE 820 IND J_1I6_COPY_TO_LOCAL
DOCUMENT CLOSE 821 IND J_1IEWT_COPY_TO_LOCAL
DOCUMENT POST 821 IND J_1ITDS_TABLE_UPDATE
BELEG CLOSE 821 IND J_1IEWT_COPY_TO_LOCAL.
For the first two entries which are marked with sequence number 43
and 44 for the Business Transaction 'DOCUMENT' and Time 'CLOSE' ,
ensure that the sequence number is below the number for function
module FI_DOCUMENT_CLOSE. This is to ensure that these two functions
are processed in time for other checks in Financial Accounting.
MIRO documents also will update the Business place section code.
Reg
Madhu M -
Substitution rule for Business place and section code
Hello Friends,
We have a business place and a section code. I want to write a substituion rule for vendor invoice for business place and section code.
When i see in header, i am not find BUPLA and SECCO in header. I am finding them in line item. How do i get these fields in header segment. I tried substution rule in line item, but the tds is not deducted.
Thanks
SKhi SK,
i am not understand your problem. Previously i face one problem regarding business place and section code. While booking invoices and advance payments the user forgets to specify business place or section code and some times he specifys wrong business place also. Basing on business place or section code we cant restrict the users because there is no authorisation object.
i created one validation that if my business area is 1000. then substitute the business place field with section code.
we have business place individual business area wise so i created this substitution.
Regards,
Sankar -
Regarding FB60 tcode business place and section code
Hi Expects
My Problem was in fb60 when i enter any business area business place and section code automatically displaying.
its default coming for vendor only .
i want to clear that one . i have checked user exit , badi and substitutes also they are not maintained . is they any other possibility to maintain business place and section code by default .
pls need u r suggestions
thanks in advance
Regards
vas.
Edited by: srinivasvzm on Mar 18, 2010 7:17 AM
Edited by: srinivasvzm on Mar 18, 2010 7:21 AMThank u amit
I want to clear that value of business place and section code only my user wants enter value manually .
Regards
vas -
Please insert Business Place and Section Code to proceed
Hi
I am getting following customised error "Please insert Business Place and Section Code to proceed" which is mainatined as validation while clearing the vendor through f-44 but when i see the document which has to be clear in which both business place and section code is entered properly. But when doing clreaing the section code field comes as blank where as business place is filled hence the above error is coming.
I am surprised to see that in document both the fields are entered correctly where as in clearing its not showing section code.
ThanksHi Gaurav,
I Suppose the validation is build on call up point : 2 (line item) so it will check the bussiness place and section code in every line items and triggers a error, The Previous suggestion of excluding the T.Code f-44 is good as I did the same thing in our project.
Thanks & Regards
Krishna Chaitanya
Maybe you are looking for
-
Media file type, how to pick player IN BROWSER LINKS ??
I hit an mp3 link in Safari, it opens a new tab to play it using what I think is a version of iTunes (it has a 30-sec button on the front?). Same in Firefox, though I get a window with Quicktime instead (big Q before playing). *How on earth do I get
-
Can I connect my Lacie Space II - 2 Tb to an Apple TV and stream my movies in the LaCie to my TV through the Apple TV? I would really like to have an apple TV to stream from and use also as media player in replacement of mt PC. Is this possible? Than
-
Wordpress 403 permission denied
Whenever I try to get to my newly installed wordpress I get a 403 permission denied error. What can I do about this? Last edited by kahrkunne (2014-04-11 13:40:52)
-
Concatenate : extract from non-SAP
Hello All, I am extracting some records from a non-SAP system via XI. The problem is with the 0UNIT field. data from SIBEL is stored as "Hou" (hours) but in BW we can only use "H". Can any one tell me how can i transform "hou" to "h"in BW. any syntax
-
Exceeding ISE license counts - performance consequences?
Hello, I have a customer that is running a 2-node ISE deployment and is licensed for 250 Base and 250 Adv. users. We have moved the wired users over in one of their offices into Monitor Mode only, and the Base/Adv. Active license counts have exceeded