FSG report not printing column values on same line but sequentially

FSG report problem:
We have defined 2 FSG reports 'Balance Sheet - Total' and 'Balance Sheet - Detail'. Both reports have 3 column values, namely the value in Euro (our Functional Currency), the value in MUR - Mauritian rupees (our reporting currency) and the rate of exchange.
The report 'Balance Sheet - Total' displays these values for assets e.g.:-
EURO MUR Rate of exchange
Non-current assets
1. Intangible assets ? ? ?
2. Other investments ? ? ?
(note: ? represents a certain value)
The report 'Balance Sheet - Detail' displays values as follows :-
Account EURO MUR Rate of exchange
1. Property & Equipment
A10101 Building Cost ? 0.00 0.0000
A20105 Motor Veh Accum Dep ? 0.00 0.0000
TOTAL ? 0.00 0.0000
A10101 Building Cost 0.00 ? n/m
A20105 Motor Veh Accum Dep 0.00 ? n/m
(note: ? represents a certain value)
What we don't understand s why the 'Balance Sheet - Detail' report repeats the display of column values in MUR FOLLOWING the display in EURO, instead of displaying column values for EURO and MUR on the same line, just like in the case for 'Balance Sheet - Total'.
Is there anything in the definition of column set, row set or report set should I change?
Can anybody help. Thanks.
null

The problem is related to defining the column set properly. It is OK with the first report and needs modification for the second. Formatting is also important so that they appear in the same line(row). The columns need to be linked to the fileds and assignment to set of books is also important as mentioned by Rajsekhar

Similar Messages

My photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

my photos are not printing right with adobe manages color but works when i use printer manages color. never had any issues untill a week ago.

We use CS6, yes we calibrate using x-rite. I have always had adobe manage colors when printing. This problem just occurred, all my settings are the same as they have been for years. The only thing we did lately is do an update to CS6. We thought it might be our printer but when we use the printer manages color it works fine, The problem with adobe manages color is it is not blending the light highlights like on top of the cheeks with the colors around the cheeks and its putting a faint red between the two it just does not have a smooth transition. I printed a photo that I had printed 4 months ago with no issue, and this time it had the issue that I am dealing with now. Somehow the photo shop manages color is not getting the right info to my printer.
I set paper type
set quality
no color adjustment
set my profile
Teri

Web Report not printing the fiscal year period variable value

Hi,
In web report where in one text element, we enabled the fiscal year period variable value to display
in the report result.
If we run the report then this fiscal year period is displaying in the general information.
We have print button (Java Code), where user can take a printout of the same report.
In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
It is required to print the fiscal period also in the print out of the report.
Any help to come out of this.....
Thanks
Srinivas

Hi
Any Help.....
Srini

CR XI landscape report not printing correctly on one particular server

Post Author: BronxJedi
CA Forum: General
I have a report that was designed in Crystal XI (11.5.0.313) that is not previewing or printing correctly when the users access it on our production server. The report is designed as a landscape report, for an 8.5x11 size paper; however, when this report is previewed on the production server all of the data is pushed over to the left, as though the computer is trying to cram it all into a portrait-sized layout. Furthermore, when viewing the Document Properties of the report in preview it says that the page size is 11x17!
This report, I should mention, is part of a web application designed in Visual Studio. When users select a report to run the application actually displays the report as a PDF document in an Adobe Reader window. So, when I mention "preview" in this post it is not the Crystal Reports print preview window but rather an Adobe Reader window previewing the report as a PDF document.
None of the other landscape reports in this application are demonstrating this same problem. Also, the report in question previews and prints perfectly fine when it is run on other computers or servers.
Currently, we have eliminated design flaws in the report as a suspect because all of the pertinent properties in the report's design are set properly. We have also eliminated the users' printer settings as the culprit because the problem exists no matter who attempts to print that particular report and no matter what printer is chosen.
Right now we are operating under the assumption that the problem lies within the server (which is a new box that just replaced one which died...the hardware on this new box is different, I am told by our server guy, but everything else was mirrored from the old box); however, we are unsure of what to examine in our attempts to fix it.
The production server is running Win 2003 Server, R2, SP2 and there are no apparent printer drivers installed on the production server. We are using Adobe Reader 8.0 on all machines that can access this report.
If anybody out there has had this same problem or knows of anything else we can check (either on the production server or within the report's design) we'd appreciate it. Why would only this particular report be exhibiting this problem and why on Earth would the Adobe Document Properties think that the page size is 11x17?
Thank you,
Sean

Once you find an erroneous report, can the report be re-run over the same data (same parameters, same underlying data records after record selection) and the error duplicated?
Can you dump the data read by Crystal in the Detail section of the report? (Verify the data is as expected...)
Can you post the stored procedure? (Please wrap it in markup to keep it readable. A sample of both crosstabs wrapped in the markup would be helpful, too.)
Carl

On Demand sub report not printing in IE and Other Browsers

Hi All,
We have developed Crystal report for our web application with version 13.0 and Visual Studio 2010.
When we run our web app in IIS report display fine in All web browser and when we print report in ActiveX mode in IE 9+ for main report it prints fine but if we print on demand sub report it not printing even a single page out of 2 or more than 2 page.
If on demand sub report has only one page then it will print in IE 9+ browser.
Even If we click on Export button on demand sub report easily export to pdf or any formate the issue while we print it.
It going to hanged while we print on demand sub report with more than one page.
Please help in this issue.
Also please let me know if you want more detail.

Not sure why you created two Discussions on the same issue? (CR on demand sub report goes hang in IE)
Locking this Discussion.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Receivables - ARDLP Report Not Printing Country Name

AR Report ARDLP for concurrent program Dunning Letter Generate is not printing Country Name on send to and remit to part of the letter. Though the package 'arp_addr_label_pkg.format_address' is giving the output with the country name(when I ran the package in SQL Developer) but when I run the report it is not giving the country name. What could be the reason?
Thanks,
Sravanthi

Thankyou very much Nagamohan. It is printing the country now on the dunning letters. I think it was because of settings in system options though the default country was set, print home country was unchecked. When I reran the process it printed the country.
The Statement print program also had the same issue. Now after the changing the system options, it is printing the country in the send to address but not in the remit to address if the countries are same for both send to and remit to. If they are different it is printing in both the places. Eg. If it is United Kingdom in both send to and remit to, its printing only in send to. If its united states in send to and united kingdom in remit to then its printing in the remit to area. Any idea on this?
Thanks,
Sravanthi

Change source (sql) of interactive report based on column value?

I've got an Interactive report displaying 10 columns. What I'd like to do is show different columns depending on the value of the first column. All the rows in the result will have the same value in the first column.
If value in column 1 (on any row) = 'aaaa' then
display columns 1,2,3,4, 9, 10
If value in column 1 (on any row) = 'bbbb' then
display columns 1,2,3,4, 7, 8
If value in column 1 (on any row) = 'cccc' then
display columns 1,2,3,4, 5, 6
Should i somehow make the sql query dynamically change or can I use apex to dynamically hide the columns I don't want in the interactive report?
Appreciate if you could point me in the right direction...
/A

Hello Andy,
You can solve that in your SQL query:
select col1, col2, col3, col4
,   case col1
    when 'aaaa' then col9
    when 'bbbb' then col7
    when 'cccc' then col5
end newcol5
from tableYou may have to use to_char or to_number conversions when the datatypes of the col5,7 and 9 are different.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Display hperlink in report based on column values

Hi,
I have a requirement to make report column as hyperlink column with the condition that
1 . If report column values is 0 then on '0' hyperlink should not display.
2 . In other values hyperlink should display.
Please help me to achive this.
Thanks & Regards,
Priya

select decode ( col1, 0, null, '{a href="f?p=&APP_ID.:XX:'||'&SESSION.'||'::::ID:'||col1||':YES" }Go{a}' as Link, col2, col3 from table
XX is your linked page number.
Replace { to <
and
} to >

Transaction Register Report not printing Correctly

Hi,
In Accounts Receivables Transaction Register Report is not printing correctly..
Once I issue print job for Transaction Register Report...Blank page is coming..
what is the cause..please suggest

Does the print work properly with other reports? If so, I suggest you run the report in debug mode. Please check (Note: 226013.1 - How to run AR RXi reports in debug mode) for more details.
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=226013.1

Read one column and output its second column value in same row

Hi
I have 2 columns, of which I only wish to read the first column. There is an input value, which comes from an outside source, but we can call a constant for this particular question. This constant value must be compared to these first column values, untill it equals the same value. The code must then read the second columns value in the same row and output this value. The exel spreadsheet is below as an example, though the sheet has far more values and larger numbers.
If there is no value in the first column which is equal to the input constant, it must output a 0. If anyone could help with this it would be fantastic. I'm still busy working on it and might get it eventually, but I would like to get there faster a great deal.
Thanks
Jingles
Attachments:
Exel.JPG ‏35 KB

Jingles,
if you get the data in a 2d array, you should be able to write soemthing like this pseudocode:
while i<max length
if checkvalue=array[1,i]
output array[2,i]
i++
if output is empty output zero
Regards,
Kyle Mozdzyn
Applications Engineering
National Instruments
Regards,
Kyle M.
Applications Engineering
National Instruments

Clock type symbol and pending on report not printing how do I remove

HP Photo smart 6510 network printer print from Lumina Windows phone working fine for over week
suddenly not printing. Checked status at e center and items are pending with a clock like symbol next to them,
How can I remove this symbol and could this be stopping my printing. Previous items do not have symbol and have printed, Thanks

What is the subject for the pending job?
The clock icon makes me think that this is a scheduled delivery app trying to print and it is stuck in pending.
The best solution for this is to cancel the pending jobs and the them perform a network reboot.
1. Disconnect the power cord from the back of your router, then power off the printer. Wait about 20 seconds.
2. Reconnect the power cord to your router, wait 30 seconds, and turn the printer back on.
After performing those steps, try to use your ePrint again and let me know if it works.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

EPrint Print Report Not Printing

I've set up my HP Photosmart 7510 e All-In-One printer wirelessly and it works fine, but I just got an iPhone and now I'm attempting to set up ePrint. When I go on my printer and click "Print Report," I get a message that the report will take a few moments to print, and then nothing ever prints.
I'm just trying to get the printer code to add my printer so I can can get the printers email address and use it for ePrint.

Hi djneetz, to obtain the printer code do the following:
Press the wrench icon on the printer front panel display
Press "Web Services"
Press "Enable Web Services"
This should result in the printers unique code being printed out, which is the email address when you add the suffix @hpeprint.com. You can customise this address once you create an ePrintCenter account.
Let me know if you're having problems getting this to work for you.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Report not printing from server

hi i am using vs 2008 and crystal report 115.7.620
I am using the report to print cheque without preview. I am suing DNN version 5.4.2.
i am using the printtoprinter function.
iwhen i click on the print button i get this error.
I am accessing from a server where i have deployed the dnn website. Crystal report is installed onteh serve too.
am i missing something.?
Please let me know
Thanks in advance

Very good. Version 10.5 will work for us.
I'd like you to apply SP 1 for CR 10.5 from here:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Recompile teh app and use the SP 1 runtime:
https://smpdl.sap-ag.de/~sapidp/012002523100010010692008E/crredist2005_sp1_x86.zip
Ensure the printer driver is installed on teh server. If this is a system printer, see [this|http://support.microsoft.com/kb/184291/en-us] MS Kbase.
Ludek

MY PIXMA iP4000 not printing--paper feeds and steps through but only blank pages

The printer sounds like it is printing----you can hear the print head moving---but nothing prints....
pages are completely blank. Reseated the connections, no effect. Took out all the cartridges, reseated
them, no effect. Still only prints blank pages. Connected it to another computer, same---only blank
pages...nothing, not even a test page or nozzle page will print. Any ideas? Was working fine
on Monday when I went out of town until Friday. When I tried to print on Saturday morning, only
blanks pages. Just spent a small fortune on ink for the printer and would hate to trash the
printer, but can't justify spending more than the price of a new one to have the old one fixed.
PS The printer is connected to my USB port, as it was for the past several years when it worked
fine. Totally stumped/

Thanks, Michael, however, I was on the phone with Canon for some time, and could not get the printer to do anything even off line. Was told the iP4000 is over 8 years old and there are no parts available to repair it.
So I have already replaced the printer with an iP2702 that was on sale at a nearby
mass merchandise store. I was intending to replace the iP4000 eventually anyway, as the red was
not printing as vividly as it once did...more like a purple. Thought at first it was because I was using
3rd party ink, but even after replacing the magenta cartridge with "genuine Canon", the red was still
not as vivid as when it was new.
Unfortunately,as you know, the iP2702 got uses a more expensive combined color cartrdige
rather than the separate ones in the iP4000.
I am suspecting the reported failure of my iP4000 to print may be due to the third party cartridges
which I was told do not contain a "chip" as do Canon cartrdiges and that may signal to the printer
to suppress printing.
Strange, as I have been using 3rd party cartridges for some time prevbiously without any problem.
H. Singer

Photosmart e5520 not printing from PC or via ePrint, but OK from iPad. Why?!

Hi
I am having a problem with my brand new HP photosmart 5520 e-all-in-one.
Connected to my home wireless router fine, got network ID test page etc on initial setup, but when software installed on laptop PC, stopped printing.
Will air-print from iPad without problems, and shows up on printer control panel as default printer, but will not print.
Laptop is Vaio using Vista, network is via Netgear G+ MIMO, McAfee security on laptop (no difference if on or off).
The printer says it is connected to the router, but web services are not reachable. Also, the IP address of the printer does not open the internal web page on entering it into IE or Firefox.
The printer's IP address is fixed, but does not appear in McAfee network when interrogated. The printer is not asleep. I cannot "find" the printer or install it on the computer's network or printer control panels, and the wireless device finder will not find it either.
Any help?
I bought this because of favourable reviews and reported ease of set-up, but it is driving me crackers!!!

I have a reset that I want you to try. I have sent you some steps via Private Message. Below is a link that will show you how to use this forum feature if you are not familiar with it.
How To Send A Private Message – Video:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/How-To-Send-A-Private-Message-Video/td-p/8...
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

FSG report not printing column values on same line but sequentially

Similar Messages

Maybe you are looking for