Fstab,samba and ntfs trouble!!

Hi!
I have setup samba, everything is working..but!
I use gnome-2.12 for the moment, with hal/dbus and I have been trying to figure out WHY the h*ll gnome can mount the smbfs harddrive, but not unmount it when finished...this ends up with I having like twenty different "mount /mnt/samba " pids if I do a ps -ef
then I have to umount every single one of them by hand and as root!
So , i figured, hey, I must make umount accessible by my user, and I did, it workes because I can umount my ordinary harddrive as a user, but not the sambashare...
SO I read some more with google, and found that this is a bug in umount, so my question is:
Can I use smbumount with the sambashares instead ?? (because that one work)...the trouble is that I can't seem to find any option in GNOME to set which command to use when mounting/unmounting smbfs
or, even better perhaps, is there other ways to get shared files from a Windows machine than using Samba?
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cd auto ro,user,noauto,unhide 0 0
/dev/hda7 swap swap defaults 0 0
/dev/hda2 / reiserfs defaults 0 0
/dev/hda5 /mnt/blandad ntfs rw,uid=1000,gid=100,owner,noauto,exec,umask=0000,nls=iso8859-1 0 0
/dev/hda6 /home/spel reiserfs users,auto 0 0
//server/film /mnt/film smbfs noauto,users,gid=users,nls=iso8859-1,noatime,exec,username=guest,password,workgroup=HEM 0 0
//server/music /mnt/musik smbfs noauto,users,gid=users,iocharset=iso8859-1,noatime,exec,username=guest,password,workgroup=HEM 0 0
//server/backup /mnt/backup smbfs noauto,users,gid=users,iocharset=iso8859-1,noatime,exec,username=guest,password,workgroup=HEM 0 0

CyberTron wrote:is there other ways to get shared files from a Windows machine than using Samba?
If you install M$ SFU on the Windoze box, you can use NFS to connect to it.

Similar Messages

New to Solaris, Some Samba and NTFS issues.

Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/samba/log/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
passdb backend = smbpasswd
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/sfw/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/sfw/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
[Series]
comment = TV Series
path = /home/Kirby/Series
public = yes
only guest = yes
writable = yes
printable = no

875739 wrote:
Hi Im new to solaris and trying out ZFS which has been great.
Im haivng some trouble that I cant find up to date info on so here goes:
First how do you mount an NTFS volume in Solaris 11 Express?
I need to access the data on an NTFS drive to populate my new ZFS tank.I never had a need for it but I think you'll have to compile fuse ntfs-3g manually.
http://web.archiveorange.com/archive/v/u46DbWSGcIzl7pexf4hQ
>
Secondly, I have read only access on my samba shares from windows machines but my smb.conf looks right. a copy of my smb.conf will follow
Any suggestions would be appreciated.You don't need to use Samba in Solaris 11 Express.
http://download.oracle.com/docs/cd/E19963-01/html/821-1448/gaynd.html#gayne

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

Hard Drive Not Mounting NTFS Tried MacFuse and NTFS-3G

Issue:
Mac OS X Tiger
- External HD NTFS Formatted (Win XP)
- Does not mount, but shows in Disk Utility (running on USB2.0)
Ran Disk Utility's Verify Disk:
Invalid B-tree node size
The volume needs to be repaired.
Error: The underlying task reported failure on exit
1HFS volume checked
Volume needs repair
Repair Disk:
same errors above
but under HFS volume check shows 1 volume could not be repaired because of an error
I've tried installing Macfuse and NTFS-3G and FinkCommander. I've tried running terminal commands offered on various sites.
I don't have Bootcamp.
I believe this hard drive was connected to my pc (win xp) when it may have crashed on me. I think its a recovery issue because I run a 4 bay usb hd box that probably wasnt plugged in when this happened, and those hard drives can be seen my this mac. The crashed computer's hard drive and this external hard drive are the only ones not being read. Can somebody help me? Thanks.
PS- I ran a demo of Boomerang and showed all my files on this external hard drive. It was all under the Regular tab, not the Lost tab.
I have techtool pro as well. I just got it yesterday,and I'm not sure if it's supposed to fix this stuff.
Do I need one of the recovery programs out there like Diskwarrior, DataRescue, Boomerang, etc etc?

Is it possible that your hard drive is full enough that there was not enough space on it to complete the reinstall of OS X 10.4?
You may have partial installs of the OS on the hard drive which have totally filled the drive. This is not a certainty, just a possibility, but it could explain why there is no error report on the drive.
Do you have access to another Mac with FireWire? If so, you can try to use FireWire Target Disk Mode with your iBook as the Target Disk to see if you can retrieve your data to the other Mac's hard drive.
Instructions on recovering from the flashing question mark folder can be found in this Apple Knowledge Base article:
http://docs.info.apple.com/article.html?artnum=58042

I have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?

i have updated my 4s iphone to ios 6.1.3 and have trouble connecting it to wi fi . i tried to back up it on itunes and then restore it but now i have left with a phone that still doesnt connect to wi fi and lost all my data. anyone knows how to fix it?

If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, there is a hardware problem.

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow Lepard it work just perfectly... help please.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.

Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.

Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.

Sorry in my MBP Snow lepard it work.. don't have Lion In MBP

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

Hello. May I ask: I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files. Each page is formatted to A4 size, portrait. But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page. I cannot seem to find any controls to adjust this. Any advice appreciated.

Thanks CtDave, for the further info. Unfortunately, those suggestions are not working, which is strange.
....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF. One simply choses the files, orders them, and creates a PDF. (Resolution doesn't matter; 300 DPI is no problem.) However, my new Photoshop CS5 does not have the option in Automate.
What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF. It worked without a problem, but seems like more work than the old PS method. I will download a newer version of Acrobat to see if that makes any difference.
.....Also, thanks Test Screen Name: I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf). But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
Kind regards,
Prince Nuada

I baught second hand iMac and having trouble to reset to factory setting Help pls

I baught second hand iMac and having trouble to reset to factory setting Help pls

The previous owner left a Recovery HD partition on the drive. You cannot use it because it will only install a version of OS X that is tied to that persons Apple ID. You cannot use his/her Apple ID nor reinstall his/her copy of OS X. You must start, literally, from scratch.
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How To Enable Samba And SWAT In Solaris 10

Link: http://bensweb.no-ip.info/ultrasparc/samba.htm
This is a short and simple guide that I wrote for new Solaris users who want to get Samba and SWAT up and running quickly. (It works with SPARC and x86.) Enjoy!

i try go to link http://bensweb.no-ip.info/ultrasparc/samba.htm but
the result is not found ...The requested URL /ultrasparc/samba.htm was not found on this server.
anyone..help me how to enable samba on solaris 10

I am running Mountain Lion and have trouble installing Adobe Application Manager

I am running Mountain Lion and have trouble installing Adobe Application Manager

Hi,
Do you receive any specific error message when Adobe application manager is being installed?
Thanks

I am physically disabled and having trouble with the sensitivity of the screen on my iPad mini - any suggestions?

I am physically disabled and having trouble selecting apps because of the sensitivity of the screen - any suggestions on what to do?

I would think assistive touch would be exactly what you are looking for. It's engaged using the Accessibility method I described above.
Here's the writeup about assistive touch from the iPad User Guide:
AssistiveTouch AssistiveTouch helps you use iPad if you have difficulty touching the screen or pressing the buttons. You can use a compatible adaptive accessory (such as a joystick) together with AssistiveTouch to control iPad. You can also use AssistiveTouch without an accessory to perform gestures that are difficult for you.
Turn on AssistiveTouch: Go to Settings > General > Accessibility > AssistiveTouch. To set Triple-click Home to turn AssistiveTouch on or off, go to Settings > General > Accessibility > Triple-click Home.
Adjust the tracking speed (with accessory attached): Go to Settings > General > Accessibility > AssistiveTouch > Touch speed.
Show or hide the AssistiveTouch menu: Click the secondary button on your accessory.
Hide the menu button (with accessory attached): Go to Settings > General > Accessibility >
AssistiveTouch > Always Show Menu.
Perform a swipe or drag that uses 2, 3, 4, or 5 fingers: Tap the menu button, tap Gestures, and then tap the number of digits needed for the gesture. When the corresponding circles appear on the screen, flick or drag in the direction required by the gesture. When you finish, tap the menu button.
Perform a pinch gesture: Tap the menu button, tap Favorites, and then tap Pinch. When the pinch circles appear, touch anywhere on the screen to move the pinch circles, then drag the pinch circles in or out to perform a pinch gesture. When you finish, tap the menu button.
Create your own gesture: Tap the menu button, tap Favorites, and then tap an empty gesture placeholder. Or, go to Settings > General > Accessibility > AssistiveTouch > Create New Gesture.
Lock or rotate the screen, adjust iPad volume, or simulate shaking iPad: Tap the menu button, then tap Device.
Simulate pressing the Home button: Tap the menu button, then tap Home. Move the menu button: Drag it to any location on the screen.
Exit a menu without performing a gesture: Tap anywhere outside the menu.

I have a macbook air and have trouble getting images to load on ebay, many blogs

i have a macbook air and have trouble getting images to load on ebay, many blogs and also pinterest. What can I do to improve performence?

this is not normal but try to see the multiples accounts in the mail check if his account is not connected yet

Problems with UAC and NTFS File Permissions on a File Server.

LarryG. wrote:
It looks to me like your account doesn't have the proper permissions on all of the sub folders. Can you verify that? Once you have the proper permissions this issue should go away.
This is a feature, not a bug. You do not have permissions.

Hello Everyone,I'm curious about your experience with UAC and NTFS permissions--in particular on a file server. In my case, I'm running Server 2012 R2.I have a very large company shared folder. I right click on it and go to properties to check the size. The size is only 5GB or so and should be over 300GB. How is this possible? I'm finding that some of its subfolders are tied into UAC and some folders are not. UAC-related subfolder:Non-UAC related subfolder:In the pictures above, both folders are department-related folders. They are not system folders. The folders have the same owner. The folders are located on the same folder level. When I try to view the permissions of the UAC-related folder, I get this:I'm a domain admin, so when I go through the prompts, I can see the permissions.But this is a total pain because I now require third...
This topic first appeared in the Spiceworks Community

Fstab,samba and ntfs trouble!!

Similar Messages

Maybe you are looking for