FTP Adapter File Size Limit

Hi,
Is there a limit on file size for FTP 'put' operation in BPEL/ESB FTP adapter for the file in ASCII format?
For File adapter polling the limit is 7 MB unless Debatching feature is used I think.
Thanks

There used to be but in 10.1.3.4 the restriction has been lifted but there are some restrictions. If you have File / Ftp input and File / Ftp out put you can use the MOVE functionality
http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/adapters.htm#CHDHJGHG.
If you are using DB adapter this won't work and the 7MB file limit exists, although this is really streatching it. I wouldn't go above 1MB. Oracle Data integrator is a good option for this kind of pattern.
cheers
James

Similar Messages

FILE and FTP Adapter file size limit

Hi,
Oracle SOA Suite ESB related:
I see that there is a file size limit of 7MB for transferring using File and FTP adapter and that debatching can be used to overcome this issue. Also see that debatching can be done only for strucutred files.
1) What can be done to transfer unstructured files larger than 7MB from one server to the other using FTP adapter?
2) For structured files, could someone help me in debatching a file with the following structure.
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_2
300|Line_id_2|1234|Location_ID_2
400|Location_ID_2|1234|Dist_ID_2
100|PO_226355|1234|7136890
200|PO_226355|1234|Line_id_N
300|Line_id_N|1234|Location_ID_N
400|Location_ID_N|1234|Dist_ID_N
999|SSS|1234|88|158
I would need a the complete data in a single file at the destination for each file in the source. If there are as many number of files as the number of batches at the destination, I would need the file output file structure be as follows:
000|SEC-US-MF|1234|POPOC|679
100|PO_226312|1234|7130667
200|PO_226312|1234|Line_id_1
300|Line_id_1|1234|Location_ID_1
400|Location_ID_1|1234|Dist_ID_1
999|SSS|1234|88|158
Thanks in advance,
RV
Edited by: user10236075 on May 25, 2009 4:12 PM
Edited by: user10236075 on May 25, 2009 4:14 PM

Ok Here are the steps
1. Create an inbound file adapter as you normally would. The schema is opaque, set the polling as required.
2. Create an outbound file adapter as you normally would, it doesn't really matter what xsd you use as you will modify the wsdl manually.
3. Create a xsd that will read your file. This would typically be the xsd you would use for the inbound adapter. I call this address-csv.xsd.
4. Create a xsd that is the desired output. This would typically be the xsd you would use for the outbound adapter. I have called this address-fixed-length.xsd. So I want to map csv to fixed length format.
5. Create the xslt that will map between the 2 xsd. Do this in JDev, select the BPEL project, right-click -> New -> General -> XSL Map
6. Edit the outbound file partner link wsdl, the the jca operations as the doc specifies, this is my example.
<jca:binding />
        <operation name="MoveWithXlate">
      <jca:operation
          InteractionSpec="oracle.tip.adapter.file.outbound.FileIoInteractionSpec"
          SourcePhysicalDirectory="foo1"
          SourceFileName="bar1"
          TargetPhysicalDirectory="C:\JDevOOW\jdev\FileIoOperationApps\MoveHugeFileWithXlate\out"
          TargetFileName="purchase_fixed.txt"
          SourceSchema="address-csv.xsd"
          SourceSchemaRoot ="Root-Element"
          SourceType="native"
          TargetSchema="address-fixedLength.xsd"
          TargetSchemaRoot ="Root-Element"
          TargetType="native"
          Xsl="addr1Toaddr2.xsl"
          Type="MOVE">
      </jca:operation> 7. Edit the outbound header to look as follows
    <types>
        <schema attributeFormDefault="qualified" elementFormDefault="qualified"
                targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
                xmlns="http://www.w3.org/2001/XMLSchema"
                xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
            <element name="OutboundFileHeaderType">
                <complexType>
                    <sequence>
                        <element name="fileName" type="string"/>
                        <element name="sourceDirectory" type="string"/>
                        <element name="sourceFileName" type="string"/>
                        <element name="targetDirectory" type="string"/>
                        <element name="targetFileName" type="string"/>
                    </sequence>
                </complexType>
            </element>
        </schema>
    </types>   8. the last trick is to have an assign between the inbound header to the outbound header partner link that copies the headers. You only need to copy the sourceDirectory and SourceGileName
    <assign name="Assign_Headers">
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:fileName"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceFileName"/>
      </copy>
      <copy>
        <from variable="inboundHeader" part="inboundHeader"
              query="/ns2:InboundFileHeaderType/ns2:directory"/>
        <to variable="outboundHeader" part="outboundHeader"
            query="/ns2:OutboundFileHeaderType/ns2:sourceDirectory"/>
      </copy>
    </assign>you should be good to go. If you just want pass through then you don't need the native format set to opaque, with no XSLT
cheers
James

CRIO FTP transfer file size limit

Hi,
I generated a data file on my cRIO that is about 2.1 GB in size. I'm having trouble transferring this file off of the cRIO using FTP. I've tried windows explorer FTP, the built in MAX file transfer utility, coreFTP,and WinSCP. I am able to transfer other files on the cRIO that are smaller in size.
Is there an FTP transfer file size limit? Is it around 2 GB? Is there anything I can do to get this file off of the device?
Thanks!
Solved!
Go to Solution.

I am not making the FTP transfer programmatically through LabVIEW. Rather, I am trying to utilize the cRIO's onboard FTP server to make the file transfer using off the shelf Windows FTP file transfer applications. I generate the data file by sampling the cRIO's analog inputs and recording to the onboard drive. I transfer the file at some point after the fact; whenever is convenient.
To program the cRIO, I am using LabVIEW 2012 SP1 and the corresponding versions of Real-Time and FPGA. I am using a cRIO-9025 controller and 9118 chassis.
I do not get any error messages from any of the FTP clients I have tried besides a generic "file transfer failed".
I have had no issues transferring files under 2 GB using FTP clients. I have tried up to 1.89 GB files. The problem seems to only appear when the file is greater than 2 GB in size.
I have found some information elsewhere online that some versions of the common Apache web server do not support transferring files greater than 2 GB. Does anyone know what kind of FTP server the cRIO-9025 runs?

Receiver FTP Adapter File Size Splitting

Hi,
I am receiving an IDoc from R/3 into XI.
I then map this IDoc into an xml file and use a receiver ftp adapter to drop the files onto a ftp server.
Is there anyway, that I can use the adapter to split the message interface into smaller files. For example, if I were to ftp the message interface into 1 file, the file size would be 1MB. I would like to split the 1 message interface into 4 x 250kb files without having to split the message interface?
Thanks,
Miguel

Hi,
If you split into 4 files each one should be a XML file right?
This is possible without BPM.
Go thro the blog:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Wat u need to do is make the target side 0..unbounded. If u have 100 records, Map some 25 records in first occurence, 25 in second and so on. This way u can reduce file size.
Regards,
P.Venkat

Soa 10g Ftp adapter file size

Hi,
I am using a ftp adapter to transfer files. I am placing a 9kb file but after the transfer at the destination I find the file transferred but the file size is 2.8kb. Please do suggest me the possible solution and the reason for this issue
Thanks

What 10g version do you have?
Try adding the following property to your outbound ftp wsdl file:
<partnerLinkBinding name="xxxxx">
*<property name="control.read.timeout">10000</property>*
</partnerLinkBinding>
(it's in milliseconds)
Arik

FTP adapter : file size

Hi,
I have a requirement to move file (unread) from remote server to local and capture the file size for logging purpose. I have modified my jca file to use FTPIoInteractionSpec and FTP working fine.
To get the file size, I tried using jca.ftp.size property but it returns null as response. Can you please suggest if there is any other way to get file size without reading the file?
            <bpelx:fromProperties>
                <bpelx:fromProperty name="jca.ftp.Size" variable="size"/>
            </bpelx:fromProperties>
Thanks in advance!

Hi,
It's looking like retrieving the file size is not supported by FTPIoInteractionSpec then...
You can try and the file listing operation to get the file size... It surely brings the file size for FileAdapter, but I've never tried with FtpAdapter, try and let us know please...
http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/adptr_file.htm#BABEDEGC
Cheers,
Vlad

LabView RT FTP file size limit

I have created a few very large AVI video clips on my PXIe-8135RT (LabView RT 2014). When i try to download these from the controller's drive to a host laptop (Windows 7) with FileZilla, the transfer stops at 1GB (The file size is actually 10GB).
What's going on? The file appears to be created correctly and I can even use AVI2 Open and AVI2 Get Info to see that the video file contains the frames I stored. Reading up about LVRT, there is nothing but older information which claim the file size limit is 4GB, yet the file was created at 10GB using the AVI2 VIs.
Thanks,
Robert

As usual, the answer was staring me right in the face. FileZilla was reporting the size in an odd manner and the file was actually 1GB. The vi I used was failing. After fixing it, it failed at 2GB with error -1074395965 (AVI max file size reached).

HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?

You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.

S1000 Data file size limit is reached in statement

I am new to Java and was given the task to trouble shoot a java application that was written a few years ago and no longer supported. The java application creates database files the user's directory: diwdb.properties, diwdb.data, diwdb.lproperties, diwdb.script. The purpose of the application is to open a zip file and insert the files into a table in the database.
The values that are populated in the diwdb.properties file are as follows:
#HSQL Database Engine
#Wed Jan 30 08:55:05 GMT 2013
hsqldb.script_format=0
runtime.gc_interval=0
sql.enforce_strict_size=false
hsqldb.cache_size_scale=8
readonly=false
hsqldb.nio_data_file=true
hsqldb.cache_scale=14
version=1.8.0
hsqldb.default_table_type=memory
hsqldb.cache_file_scale=1
hsqldb.log_size=200
modified=yes
hsqldb.cache_version=1.7.0
hsqldb.original_version=1.8.0
hsqldb.compatible_version=1.8.0
Once the databsae file gets to 2GB it brings up the error meessage 'S1000 Data file size limit is reached in statement (Insert into <tablename>......
From searching on the itnernet it appeared that the parameter hsqldb.cache_file_scale needed to be increased & 8 was a suggested value.
I have the distribution files (.jar & .jnlp) that are used to run the application. And I have a source directory that was found that contains java files. But I do not see any properties files to set any parameters. I was able to load both directories into NetBeans but really don't know if the files can be rebuilt for distribution as I'm not clear on what I'm doing and NetBeans shows errors in some of the directories.
I have also tried to add parameters to the startup url: http://uknt117.uk.infores.com/DIW/DIW.jnlp?hsqldb.large_data=true?hsqldb.cache_file_scale=8 but that does not affect the application.
I have been struggling with this for quite some time. Would greatly appreciate any assistance to help resolve this.
Thanks!

Thanks! But where would I run the sql statement. When anyone launches the application it creates the database files in their user directory. How would I connect to the database after that to execute the statement?
I see the create table statements in the files I have pulled into NetBeans in both the source folder and the distribution folder. Could I add the statement there before the table is created in the jar file in the distribution folder and then re-compile it for distribution? OR would I need to add it to the file in source directory and recompile those to create a new distribution?
Thanks!

4GB File Size Limit in Finder for Windows/Samba Shares?

I am unable to copy a 4.75GB video file from my Mac Pro to a network drive with XFS file system using the Finder. Files under 4GB can be dragged and dropped without problems. The drag and drop method produces an "unexepcted error" (code 0) message.
I went into Terminal and used the cp command to successfully copy the 4.75GB file to the NAS drive, so obviously there's a 4GB file size limit that Finder is opposing?
I was also able to use Quicktime and save a copy of the file to the network drive, so applications have no problem, either.
XFS file system supports terabyte size files, so this shouldn't be a problem on the receiving end, and it's not, as the terminal copy worked.
Why would they do that? Is there a setting I can use to override this? Google searching found some flags to use with the mount command in Linux terminal to work around this, but I'd rather just be able to use the GUI in OS X (10.5.1) - I mean, that's why we like Macs, right?

I have frequently worked with 8 to 10 gigabyte capture files in both OS9 and OS X so any limit does not seem to be in QT or in the Player. 2 GIg limits would perhaps be something left over from pre-OS 9 versions of your software, as there was a general 2 gig limit in those earlier versions of the operating system. I have also seen people refer to 2 gig limits in QT for Windows but never in OS 9 or later MacOS.

Is there a Maximum file size limit when combining pdf files

I am trying to combine files 8 PDF files created with i Explore using Acrobat XI Standard, the process is completed but when opening the file not all 8 individual files have been combined only the first two have been combined, the process shows all eight being read and combined.
I can open and view each of the original 8 individual files and read the content without any issue, the largest of the eight files is 15,559kb and the smallest is 9,435kb
if anyone can assist that would be most appreciated

Hi Tayls450,
This should not have happened as there is no maximum file size limit when combining PDFs.
Please let me know if there are some password protected PDFs also?
Also, I would suggest you to choose 'Repair Acrobat Installation' option from the Help menu.
Regards,
Anubha

Folio file size limit

In the past their were file size limits for folios and folio resources. I believe folios and their resources could not go over 100MB.
Is their a file size limit to a folio and its resources? What is the limit?
What happens if the limit is exceeded?
Dave

Article size is currently capped at 2GB. We've seen individual articles of up to 750MB in size but as mentioned previously you do start bumping into timeout issues uploading content of that size. We're currently looking at implementing a maximum article size based on the practical limitations of upload and download times and timeout values being hit.
This check will be applied at article creation time and you will not be allowed to create articles larger than our maximum size. Please note that we are working on architecture changes that will allow the creation of larger content but that will take some time to implement.
Currently to get the best performance you should have all your content on your local machine (Not on a network drive), shut down any extra applications, get the fastest machine you can, with the most memory. The size of article is direclty proportional to the speed at which you can bundle an article and get it uploaded to the server.

WebUtil File Transfer - file size limit

Does anybody know what the file size limit is if I want to transfer it from the client to the application server using WebUtil? The fileupload bean had a limit of 4 Mb.
Anton Weindl

Webutil is only supported for 10g. THe following is added to the release notes:
When using Oracle Forms Webutil File transfer function, you must take into consideration performance and resources issues. The current implementation is that the size of the Forms application server process will increase in correlation with the size of the file that is being transferred. This, of course, has minimum impact with file sizes of tens or hundreds of kilobytes. However, transfers of tens or hundreds of megabytes will impact the server side process. This is currently tracked in bug 3151489.
Note that current testing up to 150MB has shown no specific limits for transfers between the database and the client using WebUtil. Testing file transfers from the client to the application server has shown no specific limit up to 400Mb; however, a limit of 23Mb has been identified for application server to client file transfers.

Lite 10g DB File Size Limit

Hello, everyone !
I know, that Oracle Lite 5.x.x had a database file size limit = 4M per a db file. There is a statement in the Oracle® Database Lite 10g Release Notes, that db file size limit is 4Gb, but it is "... affected by the operating system. Maximum file size allowed by the operating system". Our company uses Oracle Lite on Windows XP operating system. XP allows file size more than 4Gb. So the question is - can the 10g Lite db file size exceed 4Gb limit ?
Regards,
Sergey Malykhin

I don't know how Oracle Lite behave on PocketPC, 'cause we use it on Win32 platform. But ubder Windows, actually when .odb file reaches the max available size, the Lite database driver reports about I/O error ... after the next write operation (sorry, I just don't remember exact error message number).
Sorry, I'm not sure what do you mean by "configure the situation" in this case ...

TFS Preview source control file size limit

Is there a file size limit for adding large files to a TFS Preview project's source control..? I would like to add some files to source control that are in the 20-30Mb range and the requests keep aborting.

Hi Erich,
Thank you for your post.
I test the issue by adding .zip file to TFS Azure version comtrol, the size include 10MB, 20MB, 100MB, 2GB, i can add they to version control properly without any problem.
In order narrow down the issue, here are some situations i want to clarify from you:
1. What's the error message when TFS azure block the check-in process? Could you share a screen shot?
2. Which client tool are you using? VS10 or VS11? Or other tools?
3. Try to reproduce this in different network environment and see what will happen.
4. Capture a fiddler trace which can help to check the issue.
Thanks,
Lily Wu [MSFT]
MSDN Community Support | Feedback to us

FTP Adapter File Size Limit

Similar Messages

Maybe you are looking for