FTP Adapter - Not Working

Hi All
I created the BPEL process to FTP csv file from FTP Server with FTP Get Adapter with file type "ASCII" mode. Even i mentioned the directory name for incoming files as "/u12/usrvis/noble" and provided "Input.csv" file name in Incoming files with name pattern and made poll frequency to 1 sec.
The path mentioned for directory name here is physical path and it is existing as it is in the server also.
But when i run the process, it is not ftp ing the Input.csv file from FTP server to my local machine.
Please help me out.
Thanks
Suneel -

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

Similar Messages

Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

AQ/FTP adapter not working

I am a newbie to oracle interconnect 9i and learning it from the oracle documentation.
I successfully created DB to DB publish/subscribe example and worked on cross referencing as well. Now I am working on AQ and FTP examples. I have following doubts
1. I created the aqapp application for AQ example given in oracle interconnect 9i documentation. My adapter service started successfully.
When I execute the procedure given in the example, to enqueue the xml_raw_q1 queue then the procedure completes successfully but the adapter reacts nothing. I am not sure whether my message is enqueued or not and if it does then why my adapter don’t pick up the message.
2. Regarding FTP, I tried to develop an example for it but was not able to do so. In oracle documentation for FTP adapters, there is no demo example given in oracle documentation as was given for DB adapters. So if someone can provide the same or similar then it will be quite helpful to me to understand FTP adapters as well.

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

FTP adapter --- Not picking up files

Hi,
I have set up an FTP adapter in archive mode to read files from FTP server and process it while archiving a copy of it. I have set up Poll interval at 40 secs and retry interval also set up. It works great the first time . Processes the file and archives it. But when the same files comes in again in the FTP server, I see the foll. message in the adapter monitor "Error: Stopped due to error: com.sap.aii.adapter.file.ftp.FTPEx: inputdat.txt: No such file or directory: No such file or directory."..The file exists in the FTP server but its not processed..I am not sure what I am missing...
-Teresa

Hi Michal,
I have timestamp set up for archive directory..So every run will create an archive file with timestamp..But the input filename remains the same..Archive functionality would remove the file inthe FTP server..So when the file comes again into the FTP server, the FTP adapter doesn't trigger automatically. Everytime I had to activate the IB for FTP adapter to trigger the process. I know this is not how XI-FTP adapter should work..Our scenario is we would receive weekly files into the FTP adpater with the same name. We need to archive each weekly file and also send it for further processing..I can't be activating the process manually ....I know something is going wrong but can't figure it out...:(..Any help is appreciated...:)
-Teresa

FTP Adapter not polling

Hi,
We have a clustered environment in Oracle SOA 10.1.3.4 MLR#1. We are setting up 3 different bpel processes polling 3 different locations and using 3 different data source. When we deploy them none of the ftp polling is working. We looked at various blog and added property for ClusterId
<property name="clusterGroupId">myBpelAdapterCluster</property>
I also tried using a different clustergroupid for each of the bpel process.
Does this clusterGroupId should be different for each BPEL process or can we use myBpelAdapterCluster for all 3. Please suggest me what may be the cause for the ftp adapter not polling.
Thanks
Jagan.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

SOA FTP Adapter stops working abruptly

Hi All,
I have a ftp service which provides XML file streams real-time on a remote machine. I connect to this FTP server using the SOA FTP adapter and process files by polling based on timestamp every 3 seconds.
The issues I face are
1) The ftp adapter stop working abruptly. Has anybody faced this issue, if yes how can this be resolved?
2) The XML files comes to FTP location at the rate 2 files per second. Ideally I want to procss this files real-time using FTP adapter. But the backlog build is causing issues. How do I fix it?
3) If there is any downtime in production how should the SOA FTP application be activated after restart.
Also, what are the other FTP adapter configuration required to optimize the SOA FTP application to meet my business purpose.

I am using SOA 11g Fusion Middleware. The error I am getting in the logs are as follows:
[2010-10-14T15:51:49.116+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@152f8c60] [userId: <anonymous>] [ecid: 0000Iid4Vx39xWD_n91FiZ1ChcgY00001u,0] [APP: soa-infra] [composite_name: ProcessData] [component_name: Mediator] [component_instance_id: 89E3E8C0D74E11DF8F0C9FB8AC26F197] [dcid: 46e7c258a0e5cad6:-5a895c67:12ba90f4a18:-8000-000000000000197a] FTP Adapter FetchAvlFiles Could not publish file {20101014T022558ZGA0002.xml} as endpoint has been de-activated.
[2010-10-14T15:51:49.116+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@152f8c60] [userId: <anonymous>] [ecid: 0000Iid4Vx39xWD_n91FiZ1ChcgY00001u,0] [APP: soa-infra] [composite_name: ProcessData] [component_name: Mediator] [component_instance_id: 89E3E8C0D74E11DF8F0C9FB8AC26F197] [dcid: 46e7c258a0e5cad6:-5a895c67:12ba90f4a18:-8000-000000000000197a] FTP Adapter FetchAvlFiles [[
BINDING.JCA-11079
The endpoint has been released.
The endpoint has been released.
The endpoint has been released, the message will not be published.
This is a non-fatal error. No fix is required.
at oracle.tip.adapter.file.inbound.Publisher.checkForDeactivation(Publisher.java:627)
at oracle.tip.adapter.file.inbound.Publisher.publishMessage(Publisher.java:327)
at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.xlate(InboundTranslatorDelegate.java:476)
at oracle.tip.adapter.file.inbound.InboundTranslatorDelegate.doXlate(InboundTranslatorDelegate.java:118)
at oracle.tip.adapter.file.inbound.ProcessorDelegate.doXlate(ProcessorDelegate.java:377)
at oracle.tip.adapter.file.inbound.ProcessorDelegate.process(ProcessorDelegate.java:175)
at oracle.tip.adapter.file.inbound.ProcessWork.run(ProcessWork.java:349)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Edited by: user5108636 on 13/10/2010 23:28

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

G5 dvi to vga adapter not working

DVI to VGA adapter not working with my G5 Dual 2.3 GHz Power PC. I am trying to use a VGA Monitor but can not get a signal. I also am using a Dell with a DVI Input and that works fine using a DVI Cable from my G5 to the Dell u2410.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

Microsoft teredo tunneling adapter not working

i have been facing this problem from about 3 days and I am not able to connect my phone through cable to my laptop neither i am able to use bluetooth...so I checked for the prblm and its this teredo adapter not working which is related to the devices i think....I
have followed every measure I could given by microsoft...I have tried uninstalling the teredo adapter but i couldn't...actually I clicked on the option dat was der as uninstall but it didn't....
after uninstalling only we had to restart the computer but since the uninstallation was not successfull so it didn;t helped me..
plz tell me some solution for this prblm!!!

Hi,
I am afraid that this forum is not a correct forum for this issue. Since this forum is discuss about Windows form development . I suggested you posting this thread to
answer.microsoft.com-Windows OS
Have a nice time!
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

I need to know if it's 64-bit or 32-bit.
If it's 64-bit, try copying the mms.cfg file from C:\WINDOWS\syswow64\Macromed\Flash to C:\WINDOWS\system32\Macromed\Flash

Why does my digital AV adapter not work with my iPad

Why does my digital AV adapter not work with my iPad

i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

No no dear this is not my problem
My problem that i mean i say when i on my
Cellural data my gprs not working and not work my internet

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

FTP Adapter - Not Working

Similar Messages

Maybe you are looking for