Ftp connection failed using iWeb

i am trying to publish my website using iweb 3.0.4. everytime i test my ftp server i keep getting connection failed. i know for a fact that my username and password, and all related ftp server settings are correct. my webhost is godaddy and have quadrouple checked my username and passwork are correct.
i have another site also hosted by godaddy and published with iweb, and i have repeated exactly in the same way, but continue to get 'testing failed... please verify settings...' window, and therefore cant publish. very frustrated - any thoughts please? thanks much, c

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
OT

Similar Messages

FTP - "Connection failed"

"http://name:pass@ftpserver/folder"
Safari (both with "Passive mode" check or unchecked in the proxy settings)
Connection failed
There was an error connecting to the server "xxx.yyy.zzz". Check the server name or IP address, and then try again.
Firefox, Fetch, etc.
The FTP access is okay and immediate.
Is this a bug in Safari or a setting problem ?
Thanks
A

I have the same problem. If I try to connect to our company's FTP server with Safari from the internet, it just gets stuck waiting for server to respond. However, if I am on the corporate network, it connects right away. However, if I use FTP programs like Cyberduck from the internet, it connects right away. So it must be something about Safari. By the way, this also happens with Safari on iPad as well. Can someone shed some light on this? Maybe there is a setting you can do on FTP server side?

Connect failed using javamail

hi all,
i am trying to read email using javamail. But it always give an error result as below :
javax.mail.MessagingException: Connect failed;
nested exception is:
     java.net.ConnectException: Connection timed out: connect
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:161)
     at javax.mail.Service.connect(Service.java:288)
     at javax.mail.Service.connect(Service.java:169)
     at email.retrieveemail1.receive(retrieveemail1.java:48)
     at email.retrieveemail1.main(retrieveemail1.java:22)
Caused by: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:233)
     at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:189)
     at com.sun.mail.pop3.Protocol.<init>(Protocol.java:94)
     at com.sun.mail.pop3.POP3Store.getPort(POP3Store.java:214)
     at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:157)
     ... 4 more
i am using fastmail and using this pop3 address : mail.messagingengine.com
is there any possibility that this problem related with proxy server? or i just put a wrong pop3 address?
any advice will be appreciated....
thx in advance.
Edited by: inair on Feb 12, 2008 2:38 AM

Oracle is not completely up... or is still in shutdown mode.
start it manually with :
sqlplus / as sysdba
shutdown imemdiate;
startup;
exit;
now, restart SAP.

"Connection failed" using smb to Win 7 64-bit shared folder

Hi,
I am a new Mac user and was unable to find any suggestion for a solution to the problem I am experiencing.
I use a folder on my PC to store video files. It is shared and the Mac connects to the address smb://biblioteket. This usually works fine, but sometimes I get a "Connection failed" error message. I connect through a gigbit wired ethernet connection.
Some other characteristics:
- If I restart my PC and reconnect, it works again - every time.
- I can connect to the PC using Teamviewer even if I get the error message, meaning there is a connection between the computers.
- The error will always show up if I try to copy large files from my Mac to the shared folder on the PC. I get a error message during file copying, after that the mounted drive is inaccessible and the "Connection failed" error message appears.
Any suggestions?

Hi,
So I did what I always do to get the error message. I moved about 25 files from the Mac to the PC. Total size was about 5 gb. About half way through, I get the following error message:
The Finder can’t complete the operation because some data in “(filename(.avi” can’t be read or written.
(Error code -36).
So I retry, but this time the mounted drive has disconnected and get the following error msg:
The operation can’t be completed because an unexpected error occurred (error code -41).
This happened with a new user (administrator). Any ideas? Thanks in advance.

FTP connection failed in background

Hi Folks,
    I'm connecting from SAP system to a FTP server using the FTP program. When I'm connecting to the FTP server through the RFC destination SAPFTP its working fine i can connect to the server however I have to run the program in the background mode so I cannot use the SAPFTP rfc destination as it can run only on the foreground so in my case I'm using the RFC destination SAPFTPA as this is the RFC destination which can be used in the background mode.
The problem arises here when I'm using SAPFTPA in place of SAPFTP as I have to run the program in background. When I'm using the RFC dest SAPFTPA I'm getting an error saying "Attemp To Set Up Connection To 179.65.23.203 Failed" however the connection is successful when the RFC dest SAPFTP is used.
Please provide your valuable inputs.
Regards,
Santosh

You may need to write a small utility and runs in background and check
report zaRs message-id 04 line-size 132.
tables: rfcdoc.
data: rfc_mess(132),
call function 'RFC_PING' destination 'SAPFTPA'
exceptions
    system_failure        = 1 message rfc_mess
    communication_failure = 2 message rfc_mess.
if sy-subrc ne 0.
write: / 'Errors', rfc_mess.
endif.
a®

Applet to servlet connection failed using plugin 1.3

Hi,
I tried to send a serialized object from an Applet to a Servlet. It worked well until I installed the Java plugin version 1.3.
Now I can open the Connection, create an ObjectOutputStream and write the object but nothing happens then. The Servlet doesn't start working.
I don't receive an exception or error message, neither in Tomcat or Apache log-file nor in the plug-in console.
here is my code example:
String location = " http://localhost/com/spes/test/TestUploadSoundServlet";
URL servlet = new URL( location );
URLConnection servletConnection = servlet.openConnection();
// inform the connection that we will send output and accept input
servletConnection.setDoInput(true);
servletConnection.setDoOutput(true);
// Don't use a cached version of URLconnection.
servletConnection.setUseCaches (false);
servletConnection.setDefaultUseCaches (false);
// Specify the content type that we will send binary data
servletConnection.setRequestProperty ("Content-Type", "application/octet-stream");
ObjectOutputStream out = new ObjectOutputStream(servletConnection.getOutputStream());
out.writeObject(soundClass);
out.flush();
out.close();
Is there anything wrong in the code above?
thanks for help...
mfg maze

since the Apache server is listening on port 80 I thought it is not necessary to use the port number. I tried now with the new URL:
String location = " http://localhost:80/com/spes/test/TestUploadSoundServlet";but it still doesn't work.
thanks for your help

Background scheduling of FTP Connection through R/3

Hello Friends,
I have done FTP connection by using Z-pgm which uses function FTP_CONNECT. This is working fine in Foreground mode.
But in background scheduling of the z-pgm, i am getting the <b>error as 'RFC to program SAPFTP failed'.</b>
I checked RFC destination SAPFTP in SM59. There Activation type is 'Start on Front End Work Station'. I tested the connection also. Its alright.
How to do FTP processing in Background?
Cheers,
Seema

Hello,
you could try to use RFC destination 'SAPFTPA' - it's ftp on the application server. Since SAPFTP is 'Start on Front End Work Station' and in background there is no front end work station, it can't work.
Regards Wolfgang

FTP Import Failing

We are moving our E-Sourcing system from SAP hosted to local hosted. The dev ESo system sits inside our firewalls and can import successfully from our internal dev FTP server. Same scenario in QA.
In prod, we have the local ESo server in the DMZ and attempt to communicate with a prod FTP server that sits inside the firewalls. This is failing and we see an "FTP Connection failed for host" error message in the ESo log. The unix logs on the FTP server show "authenticating" and then it seems to timeout.
We have checked and doublechecked the id/pwd set up in ESo. We have verified that our firewall is set up to allow the back and forth traffic. Has anyone had a similar problem and know of a solution?
Thanks

Figured it out. Port 113 was being used back into ESo. Not sure why or where it is set, but standard 20 and 21 ftp ports were not enough.

Broken Ftp Connection and big files problem

I have a problem with big-files downloading.
Does anybody know how to resume downloading using FTP-connection?
Or how can I get bytes from FTP connected file using something like random access to avoid the restart of downloading the file?
"InputStream" does not support "seek"-like methods.

From RFC 959
RESTART (REST)
The argument field represents the server marker at which
file transfer is to be restarted. This command does not
cause file transfer but skips over the file to the specified
data checkpoint. This command shall be immediately followed
by the appropriate FTP service command which shall cause
file transfer to resume.
You should also be aware of RFC 959 Section 3.4.2 on BLOCK MODE transfers which is what allows FTP to REST a connection and "skip" n-bytes of a file.

Qosmio F30-117: Unable to make FTP connections

I have Qosmio F30-117, windows XP, Norton Internet security.
When I attempt to FTP to my website I get FTP connection failed.
I have tried on friends computer and connection was made first time.
When I attached my laptop to his Broadband connection - no FTp. This at least eliminates my router.
I have tried to disbale parts of Norton Internet Security with no success.
Help???

Hi,
so if I were you I would completely disable the Norton software and make sure the Windows Firewall is letting you trough. Otherwise you should check if your friend has set up everything correctly. If you want to test it that your machine is able to connect over FTP, then go to www.kernel.org and grab some ftp address.
Then open your favorite FTP client and try to connect. If the connection really fails then double check all settings and try it again. I think the problem is so small that everyone just oversees it. ;)
Greets

IWeb Test Connection Fail

Hi Folks, I am sure that their have been a million questions on this subject on the Test Connection failing when testing your connection to the host.
I am not sure if a solution has been found. I am having this problem and need a solution. I would like to publish through the iWeb FTP page as this is a very simple process. I tried to publish via Cyberduck and this worked ok. However the simplicity of the iWeb publisher is what intrest's me.
Does anybody know of a solution?
Many thanks
Paul

Yes, there are a million questions about this.
This is the usual answer :
When iWeb tests the connection, it tries to write a file on the server based on the server settings you provide.
When it can write, the test is ok.
It does not mean that it is the right location where you should publish your webpages. Only that the location is writable.
If the test fails, it's usually the pathname that is wrong or incomplete. See the FAQ where you host your website to learn what the correct pathname is.
If you already have a website, check the settings of that website and use those.

FTPs connection error:When using Variable substitution for Directory path

Hi
I am transferring data from BI to xml file via PI: Here a Client proxy from BI sends the data to PI and the PI FTPs the XML file to a remote location. For FTP I am using FTPs SSL connection.
It was working fine untill I used Variable susbstitution to determine Directory path dynamically. I am using this because different xml files are intended to goto the different locations.
I did the variable substitution like this:
Target Message Structure:
---> Target Directory: %var1%
<?xml version="1.0" encoding="UTF-8" ?>
<MT_BI_EXTRACT_FILE>
<Header>
<Directory>/Customer</Directory>
</Header>
<Detail>
</Detail>
</MT_BI_EXTRACT_FILE>
And in the variable substitution I am doing it this way
payload:MT_BI_EXTRACT_FILE,1,Header,1,Directory,1
And the error I am getting is:
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure.
Does anybody have some Idea of this ??
Regards
Naina

Hi,
I guess the problem is not with Variable Substitution..
Error when getting an FTP connection from connection pool:
So its a connection problem..
Also check the option Disable Security check and try again...
Try to check again if the interface is executing properly without Variable substitution and let us know..
Babu
Edited by: hlbabu123 on Jan 7, 2011 2:46 PM

FTP connection error whil,e using flat file adapter error

while using file adapter in the reciever end for proxy to file
i am giving paranters like server IP address and the port , i dont know which port to give by default it is giving me 21 , anyway how to check whether the connection is correct
and more over
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
please help me in this thanks

HI Sridhar ,
First check wether server started or not and then check you are connecting to FTP server by
go to run -> cmd and write ping and ipaddress which is used and see whether u r getting reponse from teh FTP server.
Try to login to the ftp server which you have mentioned in CC using the user name and pwd, to chk whether you have the permissions to login to the server.
Also the check whether the folder you are trying to access is having permission for delete/read/write.
Restart the FTP server and try it again.
Regards
Sridhar Goli

Trouble uploading website using iWeb 09 FTP

Hello All,
About 2 years ago I used iWeb to upload my website. At the time I had to use Website Maestro for the FTP. Recently I bought a new iMac and used iWeb 09 to change several things on my website.
I viewed all the videos on how to upload your site using the iWeb FTP and I even used the "test connection" button and it said it was great. So I went ahead and uploaded my site and iWeb 09 confirmed that everything was fine, but it didn't change my website. The old pages were still there.
I phoned my web hosting company (Host Papa) and they said iWeb 09 uploads the new pages to a folder in their cpanel and that I would have to log in to the cpanel and move folders around. I tried this but inside Host Papa's cpanel it was all greek to me. I phoned their help line and the guy switched all the files for me and the new pages published fine.
My question is why can't iWeb publish my site without me having to log into their cpanel to change folders around? I noticed on the iWeb 09 publish site I had filled in one bit of information incorrectly. Where it said "Directory/Path" I typed in www/ Their help desk said I should have typed in /public_html/ If I did this would this make a difference? Would it publish directly without me having to go into their cpanel?
Thanks for your help.
Mike

The old pages were still there.
Did you try clearing your browser's cache (CommandOptionE for Safari) and reloading the page? The site and index.html file probably should be uploaded to the public_html folder in your account.
I use WebSite Maestro and find it to be very good for uploading. You might try going back to that especially since iWeb's ftp client is posing problems. I would either try WSM or the free Cyberduck client.
OT

Using iWeb FTP results in nested site...

I'm sure I'm just being a dummy here... but I'm lost.
I'm using iWeb v3.01 to upload a site to a non-.mac host (bluehost.com). The uploads proceed without a hitch, no problem. Let's call it "www.genericsite.com."
But when I go visit the site just uploaded, the browser's URL field immediately duplicates the URL, so that it reads "www.genericsite.com/genericsite.com/index.html."
I then use Fetch (FTP client) to view the files on the site. I go into the public_html folder (where the site is supposed to go), and there I find an index.html file (good) and a FOLDER named "genericsite.com." Inside that folder, I find all the site files, and ANOTHER index.html file too.
The Bluehost people are telling me that this "nested" folder is what's causing my problem. I could work around the problem by uploading from iWeb to a folder, then using Fetch (etc.) to upload the files. But that means I have to re-publish the entire site for every little change. So that ain't a great option.
Is there any way to fix it so that iWeb just uploads files directly to the root of public_html, without putting them into a second folder?
Help, anyone?

Hi Ethmoid
Thanks for you reply & patients. I followed you instructions, when I connect to my server I see several folders, php_uploads, public_html, SP_Barbarians.
I click on public_html, I see my files connected to my website but looks like without content as the files are only 4.0 - 4.0KB.
Then I click on public_htm - upload - it takes me to my desktop where I see my website folder - I select all and upload the contents of the folder. Cyberduck successfully uploads the content which is 436MB, however the website address stays the same, i.e www.spbarbarians/public_html/welcome.html , this is the previous address that came up when I used FTP to upload from iWeb with the site address public_html as you suggested earlier (to try & get rid of the double address www.spbarbarians/spbarbarians/welcome.html)
Then I look back at the folder public_html which is in my cyberduck window connected to my server & I see that all the files are still the same size, i.e 4.0 - 8.0 KB. If Cyberduck has uploaded 436MB of content to this folder shouldn't the folders reflect this size?
This window that I am looking at In Cyberduck is connected to my GoDaddy server and shows the content at that server correct?
Please help as I have followed the instructions but I must be doing something wrong>

Ftp connection failed using iWeb

Similar Messages

Maybe you are looking for