Ftp problem , Not connected.

I am trying to ftp to one window server from my labtop but can't , i can ftp to other unix servers, any idea to fix this?
C:\Users\arif.gulzar>ftp orasbo2
ftp> dir
Not connected.
ftp> bye
C:\Users\arif.gulzar>ftp 172.29.0.119
ftp> dir
Not connected.
ftp>
C:\Users\arif.gulzar>ping orasbo2
Pinging orasbo2.internal.local [172.29.0.119] with 32 bytes of data:
Reply from 172.29.0.119: bytes=32 time=60ms TTL=123
Reply from 172.29.0.119: bytes=32 time=56ms TTL=123
Reply from 172.29.0.119: bytes=32 time=54ms TTL=123
Reply from 172.29.0.119: bytes=32 time=55ms TTL=123
Ping statistics for 172.29.0.119:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 54ms, Maximum = 60ms, Average = 56ms

Hi.
It's look like ftp server on orasbo2 is not started.
For check:
on orasbo2 netstat -na | grep 21
For enable.
Solaris 10:
svcadm enable ftp
Solaris 9 and below:
Edit /etc/inetd.conf for uncomment ftp and restart (kill -HUP) inetd
Regards.

Similar Messages

  • CS3 FTP will not connect!

    I am quite furious with Adobe. I paid the $450 to upgrade
    from 8 to the Creative Suite 3 Web Standard package and installed
    it last night. The main reason for the purchase was for Dreamweaver
    CS3. I manage about 10 sites for clients and wanted to upgrade from
    Studio 8 to CS3.
    The installation went smoothly, no glitches... I fired up
    Dreamweaver and began trying to connect to all of my sites.
    Dreamweaver could only connect to three of my 10 sites. All other
    sites gave me the standard login in inocorrect or wrong password
    notice.
    I then checked to make sure the firewall settings were
    correct and the timeout set at something greater than 2 seconds. No
    luck.. the program still will not connect to my sites.
    I do a search on Google and discover that this appears to be
    a well known issue with Dreamweaver CS3 but I can't find any real
    answers as to how to fix the problem. One would think that Adobe
    would address this on their own site but I can't seem to find a fix
    there either.
    I am using Windows XP Pro with Service Pack 3 installed. My
    old version of Dreameweaver (8) still functions and can connect to
    all sites.
    I find this absolutly maddening that such a well known issue
    has not been corrected by Adobe. They have posted nothing about a
    fix or workaround. They continue to sell a product that obviously
    has issues.. one of the most important issues.. being able to FTP
    from the program.. one of the features I have loved about all
    previous versions of Dreamweaver.. now seemingly rendered
    useless... but I still pay a premium to upgrade to a program that
    does not work.
    Mad, you bet! Macromedia did not have these issues.. and just
    try to get tech support to help you at Adobe.. I end up in
    Bangalor, wait forever and then "Mike" puts me on hold afterwhich I
    get disconnected and a dialtone.
    Has anyone been able to solve the FTP probelm with DW CS3? Is
    there documentation somewhere? Is there a webpage that clearly
    outlines what to do to fix this issue? I'm out $450 here and mad as
    hell!

    I finally got CS3 working by removing all the sites currently
    definded from the program then recreating them all over again...
    That's not the way this should work and I still can't believe Adobe
    has not addressed the problem in some manner. I searched and
    searched for info on this issue and found nothing but posts
    regarding firewall issues and 2 second timeouts.. none of which
    would have solved my problem.
    Adobe's switch to outsourced "help" is a further irritant.
    Several times I have called support and ended up being disconnected
    when the support guy could not "fix" the problem.
    I bought a CS3 updgrade for Dreamweaver months ago but it
    would not install because I had the Studio 8 product. I was
    informed that I had to buy the CS3 Suite to upgrade Dreamweaver. So
    I was out the money for the store bought boxed upgrade.. Adobe told
    me to submit a LOD "Letter of Destruction" along with proof of
    purchase and they would refund the money... that was over six
    months ago and I have yet to see a dime. Every time I call about it
    I end up talking to "Mike" in India and the connection gets
    dropped.
    Needless to say I am very dissappointed with Adobe these
    days... on a number of levels.

  • Ftp will NOT connect

    Using CS4, used to work, now will not connect with any ftp settings. Using "test" says connected right away, try all combinations of ftp setting and will not connect. Same pw and user will work thru Filezilla and older version DW. This the screen that comes up.BTW, works on ALL other DW projects, all hosted by same company but not this one...it is on a different server...

    I went to an older computer with Dreamweaver MX, set up identically, and connects to ftp right away, no problems. Other websites i have with DWCs4, no connection problem, it is jsut this one site, the one I need to work on. And it connects thru Filezilla...frustrated no end. Also, on other computer, same website will not connect thru DWCS4...sure could use a solution.

  • Dreamweaver cs3 FTP Fault - Not connecting anymore

    Hi,
    I hope someone may know the cause of this wierd problem
    My dreamweaver cs3 has just stopped connecting to server for
    any of my sites
    (i got over 100 sites and tried quite a few).
    My other ftp program external to cwcs3 is fine and continues
    to work. This
    using the same connection settings as dwcs3 site profiles.
    Nothing has
    changed on my dwcs3 profiles but yestarday I had the daylight
    saving problem
    (and last year) where i had to delete the cache file as per
    adobe tech doc.
    DW no longer crashing but i think this ftp not connecting is
    only since
    yesterday.
    I have also installed the various windows updates that came
    out recently.
    The other machines in the office continue to work fine. All
    machines import
    the same saved profiles, but if i remove the site profile and
    reimport it
    still dosent connect, but repeating this on another machine
    works without a
    problem.
    All machines in this floor have Vista Business/ CS3 web suite
    connecting to
    a windows 2003 standard ed server running iis and
    iis/microsoft ftp server.
    Same result with windows firewall disabled. Only other
    security app is NOD
    anti-virus, again all machines are the same.
    All i get is an error telling me to try passive etc, but i
    know this isnt
    the fault as the other machines with the same settings are
    fine..
    here is a copy of the ftp log after trying to connect,
    selecting a file, and
    selecting put.
    < 220 Microsoft FTP Service
    > USER mmdftp
    < 331 Password required for mmdftp.
    > PASS
    < 230 User mmdftp logged in.
    > PWD
    < 257 "/mmdftp" is current directory.
    > PWD
    < 257 "/mmdftp" is current directory.
    > CWD /mmdftp/carrs-billington.com
    < 250 CWD command successful.
    > MKD MM_CASETEST4291
    < 257 "MM_CASETEST4291" directory created.
    > CWD /mmdftp/carrs-billington.com
    < 250 CWD command successful.
    > RMD mm_casetest4291
    < 250 RMD command successful.
    > CWD /mmdftp/carrs-billington.com
    < 250 CWD command successful.
    > PWD
    < 257 "/mmdftp/carrs-billington.com" is current
    directory.
    > QUIT
    < 221
    > CWD
    /mmdftp/carrs-billington.com/mmdftp/carrs-billington.com
    < 220 Microsoft FTP Service
    > USER mmdftp
    < 331 Password required for mmdftp.
    > PASS
    < 230 User mmdftp logged in.
    > PWD
    < 257 "/mmdftp" is current directory.
    > PWD
    < 257 "/mmdftp" is current directory.
    > CWD /mmdftp/carrs-billington.com
    < 250 CWD command successful.
    > PWD
    < 257 "/mmdftp/carrs-billington.com" is current
    directory.
    The file "/mmdftp/carrs-billington.com/Company.asp" was
    skipped because the
    old remote file could not be deleted.

    If i was that anal about cpu overhead, would i be using
    dreamweavers built
    in ftp with its feature 100%cpu usage. Even on my core 2
    extreme 9000 cpu!!
    Thanks for the links, but everything in them has been ruled
    out. The issue
    is clearly not a setting within dw. Its some sort of windows
    firewall
    corruption
    Even running wf.msc (advanced win firewall config) provides
    no clues
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:[email protected]...
    >> why on earth?? why on earth not!
    >
    > If you are connecting via a router, wherever you are,
    you do not need a
    > firewall. Firewalls add overhead to your CPU and can get
    in the way of
    > other things, unexpectedly.
    >
    >> What puzzles everyone is why is still happens even
    with windows firewall
    >> disabled (even not behind any firewall or router wen
    tested with usb
    >> broadband via vodaphone)
    >
    > Disabling a firewall is sometimes like disabling Norton
    AntiVirus.
    > Neither of those will ever see the light of day on my
    computers! 8)
    >
    > Anyhow, you may find this useful -
    >
    >
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
    >
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19012&sliceId=2
    >
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "RyGa" <[email protected]> wrote in message
    > news:[email protected]...
    >> why on earth?? why on earth not!
    >>
    >> This is a laptop and only sped 60% of its life in
    the office. All
    >> machines in here are identical an this is the first
    problem with this
    >> setup in over 4 years out of 23machines. so i doubt
    its a security issue.
    >>
    >> I have also discover renamining the dreamweaver
    folder allows dream
    >> weaver.exe to function ok. whatever is causing the
    problem it is tied to
    >> the full path.
    >>
    >> Our it people have also copied renamed cuteftp to
    match the same path/
    >> exe name and it too fails to function but renaming
    the exe back to its
    >> proper cuteftp name allows it to work.
    >>
    >> What puzzles everyone is why is still happens even
    with windows firewall
    >> disabled (even not behind any firewall or router wen
    tested with usb
    >> broadband via vodaphone)
    >>
    >>
    >>
    >> "Murray *ACE*"
    <[email protected]> wrote in message
    >> news:[email protected]...
    >>> So - you are running Windows Firewall AND a
    network firewall? Why on
    >>> earth?
    >>>
    >>> --
    >>> Murray --- ICQ 71997575
    >>> Adobe Community Expert
    >>> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >>> ==================
    >>>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>> ==================
    >>>
    >>>
    >>> "RyGa" <[email protected]> wrote in
    message
    >>> news:[email protected]...
    >>>> Ok, im getting some where with this...
    >>>>
    >>>> I found this thread
    >>>>
    http://dreamweaverforum.info/dreamweaver-general/20168-dreamweaver-ftp-suddenly-stops-work ing.html
    >>>>
    >>>> which had this solution:
    >>>>
    >>>> The problem was in Windows Firewall, which
    did not recognized the
    >>>> Dreamweaver on some way even it was removed
    from the Windows Firewall
    >>>> exceptions.
    >>>>
    >>>> The solution is a bit tricky:
    >>>> 1. Remove the Dreamweaver from the Windows
    Firewall Exceptions
    >>>> 2. Copy & Paste Dreamweaver.exe on the
    Program
    >>>> Files\<Macromedia|Adobe>\Dreamweaver\
    directory to a new executable
    >>>> filename (e.g. Dreamweaver2.exe)
    >>>> 3. Run the renamed program. After the first
    FTP connection Windows
    >>>> Firewall will ask for permissions for
    connection
    >>>> 4. Close Dreamweaver and run original
    executable. SOLUTION: Windows
    >>>> Firewall will ask for the permision.
    >>>> 5. Remove Dreamweaver2.exe from WF
    Exceptions
    >>>> 6. Enjoy developing and uploading new sites
    >>>>
    >>>>
    >>>> Now as i said previously, I have tried
    disabling the windows firewall
    >>>> but to no avail. but however, renaming (and
    coping to a different exe
    >>>> name) the dreamweaver.exe file allows me to
    launch the newly named file
    >>>> and ftp works fine.
    >>>>
    >>>> But following the solution above makes no
    difference if i run the
    >>>> original exe, I dont get to re-add to
    firewall exceptions even though
    >>>> it isnt there anymore, and the dw still
    refuses to play ftp.
    >>>>
    >>>> I think this is a corruption of some sort
    with windows firewall.
    >>>>
    >>>> Id like to get to the bottom of it though,
    because after googling for a
    >>>> while i see lots of others are having the
    exact same issue. Even if the
    >>>> problem is windows firewall related and dw
    is innocent in all this, its
    >>>> still good to have a solution for anyone
    else to follow.
    >>>>
    >>>> I dont think leaving the dreamweaver.exe
    called dreamweaver2.exe is it
    >>>> as this breaks all the current registry
    references to the proper file
    >>>> name.
    >>>>
    >>>>
    >>>>
    >>>>
    >>>>
    >>>>
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\SharedAccess\Parameters\FirewallPolicy\F irewallRules
    >>>>
    >>>> "Dooza" <[email protected]> wrote
    in message
    >>>> news:[email protected]...
    >>>>> RyGa wrote:
    >>>>>> I should have mentioned. Last night
    i took my laptop home as i do
    >>>>>> quite frequesntly.
    >>>>>>
    >>>>>> The problem remains even though in a
    completely different
    >>>>>> environment, so that rules out
    network at work.. I even tried
    >>>>>> disabling all security apps (win
    firewall, nod and even that win
    >>>>>> defender)
    >>>>>>
    >>>>>> My cuteftp using the same login
    credentials (exactly the same)
    >>>>>> continues to work without a problem.
    >>>>>>
    >>>>>>
    >>>>>> I have this morning went through the
    site area of the dreamwaever
    >>>>>> options and double checked they are
    the same as the machine nearest
    >>>>>> me and they are.
    >>>>>>
    >>>>>> still no joy..
    >>>>>
    >>>>> Very odd indeed, maybe backup all the
    site files and re-install
    >>>>> Dreamweaver? Its a last ditch effort
    though, as its a very strange
    >>>>> problem.
    >>>>>
    >>>>> Dooza
    >>>>
    >>>
    >

  • 3G Problem - Not connecting

    Hi,
    I have an iPhone 3G and for the past year I have had a problem with it. After an unknown amount of time, the iPhone will refuse to send/recieve any data over 3G. The 3G symbol is still there, and I know I am in a 3G spot. Turning the iPhone off and back on solves this and I can use the internet/check emails etc. again.
    Any ideas how I can fix this?

    Hi Prakashkarthikeyan,
    If you are having an issue with your cellular data connection not linking up properly, I would suggest that you troubleshoot using the steps in this article - 
    iPhone cellular data connection issues
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Wifi problem - not connecting

    Hi, I bought my ipod touch in december in Canada. Currently I'm living in Holland. I didnt use my ipod in Canada. Since moving here I've tried to connect to my wifi network (2 laptops are connected and working fine) and it says its connected but nothing will open up. Safari say's it "cant open the page because it cant find the server". The same thing for youtube.
    I'm not sure if the ipod itself is not working right or if it could be the fact that it was purchased in North America and the settings are different for Europe. If anyone has any idea of what the problem could be please let me know. Thanks

    First of all let me say that my ipod touch works great with WEP 64 bit, 128 bit, or WPA but I couldn't get it to work with WPA2 but I don't care. It has also consistently worked at home. However I went to 10 internet cafes over vacation last week and 2/3 of them wouldn't work including 'hard rock cafe'. My suggestion to the waiter to turn off and on the wireless router was not well received.
    In all cases the problems were with wifi's that had passwords. the waiter would usually write the passowrd on a napkin. I would enter the password and get the checkmark indicating connection but safari reported 'no server'. Entering the wrong password gave me a connection error and no checkmark by the wifi network.
    I also noted that there was an ip address and gateway but the other information (dns, router) were blank. Also the ip address looked wrong as it wasn't a private address. I think it was 162.254.x.x which made no sense to me - usually it's 10.x.x.x or 192.168.x.x. So I suspect dhcp wasn't working. It was frustrating as there were often people with laptops all around me clearly checking email and watching youtube videos and such. I tried manually setting the router and dns address to x.x.x.1 but no help.
    Also when I went back to cafes that worked before they would always work again. It was consistent. When I went to cafes that didn't work the first time they still didn't work. Something is seriously wrong with ipod touch wifi.
    Comments on earlier posts - changing the ssid fixed many people's problems. This means the ipod database has some setting associtated with that SSID that is messed up. Too bad clicking 'forget this network' doesn't wipe all entries from the database like it should!
    Also another comment on earlier posts - an apostrophe may be part of the issue as this character is used in SQL and it is possible that the ipod uses a SQL database to store wifi connection information.

  • FTP server not connected from SAP

    Hi Expert,
    I want to access FTP server thru SAP.But when I try to check RFC Destination SAPFTP connection test. It's gives error 'Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur'
    What will be the reason.what setting I have missed to set.
    Can anybody give me some tips of setting for connection of SAP to FTP server.
    To complete these requirement what will be the prerequisite and what will be the steps to complete these task.
    Answer should be rewarded.
    Thanks in advance.

    Hi,
    SAPFTP runs on the client (local PC), and SAPFTPA runs on the application server.
    If you are connecting from your SAP application server to another remote host, then you use SAPFTPA.
    If you are connecting from your PC to the remote host, use SAPFTP.
    Please confirm about it.
    These are standared FTP programs which allows you to FTP from within SAP.
    The SAPFTP.EXE should be pre-installed in the users local harddisk before you can used this functions.
    Do a check first by executing program RSFTP005. It will tell you whether it can detect the SAPFTP.EXE program.
    RSFTP001 - SAPFTP version
    RSFTP002 - Execute FTP Command
    RSFTP003 - Test
    RSFTP004 - FTP copy
    RSFTP005 - SAPFTP check
    RSFTP006 - FTP command list
    RSFTP007 - Test FB:FTP_SERVER_TO_R3 / FTP_R3_TO_SERVER
    RSFTP008 - Test FB:FTP_CLIENT_TO_R3 / FTP_R3_TO_CLIENT
    Thanks
    Swarup

  • FTP problems with Airport!!! Please HELP!!!

    Hi! I recently found out about my school offering wireless access on campus. I have been using it regularly without any problems until I tried updating my website. I use Adobe Dreamweaver to create and upload pages to my site via FTP. Usually when I am at home I am connecting to the internet via dial-up and everything works fine. But, at school, the FTP will not connect to my site. I have tried disabling the firewall and messing with the Share settings, but nothing seems to work. Someone told me that FTP would not work over a wireless network, but I don't see why it wouldn't! Please HELP!

    Someone told me that FTP would not work over a wireless network...
    They are wrong.
    Unfortunately there is no way we can help you without knowing how the school network is configured. They could have FTP access blocked.

  • SXPG_COMMAND_EXECUTE - FTP problem

    Hi Guys,
    I am transferring file from FTP server to SAP server using the F.M  SXPG_COMMAND_EXECUTE but the same same program executes in QAS server but not in DEV server.
    I have checked in External command in SM69 and SM49 in both the systems both are same and I debugged and found that CALL FUNCTION 'SAPXPG_END_XPG' in side the
    SXPG_COMMAND_EXECUTE gives the error in DEV server.
    I am using a .BAT file and additional parametes I am using the FTP command with primary- proxy
    Pls find the log
    ftp> Invalid command.#
    ftp> *****************
    Invalid command.#
    ftp> *************
    Not connected.#
    ftp> cd *********
    Not connected.#
    ftp> ls
    quit
    > ftp: connect :Connection refused
    where as in QAS server the BAT file executes and gives me the list of files which is in the respective FTP server.
    Please let me know the error and I hope some thing to do with server profile setup.
    regards,
    Prabhu

    Hi,
    I am using the same FTP server logon id and password and after the the FM SXPG_COMMAND_EXECUTE if there is no permission it should return me sy-subrc = 1 but here in my case the Sy-subrc = 0 but I get the log as not connected.
    Regards
    Prabhu
    Edited by: prabhu jayaraman on Mar 11, 2009 8:57 AM

  • Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

    Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

    Hello.
    Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
    Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
    I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
    Eg    ftp.domain.com:21
    Please try the 2 suggestion above and let me know if it works.
    Regards
    Vivek

  • DW's FTP not connecting.

    For about the past month, my Dreamweaver cannot FTP to any of my known sites.
    I've been using DW for more than 10 years and have worked on multiple sites. I've been using my current install of CS6 DW for more than a year and have not changed any config. elements in the last 6 months.
    Having followed Adobe's support forum and FAQs, I've tried connecting to Adobe's test FTP server. DW will not connect to this machine.
    I can connect to my work's site using FileZilla.
    I cannot connect to Adobe's test FTP site using FileZilla.
    I've had my hosting company confirm my login user/pw are correct and that they can FTP in. I've even re-copied this info into both DW and Filezilla to confirm I've got this correct.
    In DW, I'm using port 21, passive FTP and FTP performance optimization. I've even tried combos of turning these and other toggles on/off. Still no connect.
    I'd really like to be able to have DW sync my files as I'm about to launch a major site feature. Otherwise, I could use FileZilla to push files but is there anyway to do a file syncronize with FileZilla or other program?
    Thanks

    There really was nothing that told me "hey this DW issue is a router problem" I actually stumbled upon the solution completely by accident while troubleshooting an entirely different program.
    Replacing the router was the only available fix.
    However, had I brought my computer to another network, the issue would not have presented itself. That's why I suggest that at a troubleshooting step. If you were able to connect through another network with the same machine, the problem would be outside the program itself and it would help you focus your troubleshooting efforts.

  • Can not connect to ftp with mountain lion

    Hallo everybody,
    i have a problem with my ftp-client, i use cyberduck, i can not connect to any ftp-server...
    evertime i get this message:
    USER user_xyz
    331 User user_xyz OK. Password required
    PASS **********
    530 Login authentication failed
    this will only happen when i try it with mountain lion 10.8.2
    with snow leopard and lion everything works fine and i can connect to the ftp-server.
    i try to take another ftp-client but its the same... i try filezilla and transmit.
    can anybody help me with this problem?

    In your Network System Preferences, under Advanced, Proxies tab, is Passive mode selected? If it is, try toggling it off then on (or try it with it off).
    Also, have you contacted the Cyberduck people to ask if they know about a problem?
    Have you tried connecting from Terminal?

  • I tunes 8 problem-could not connect to the itunes stor

    since upgrading to Itunes 8, itunes cannot connect to the store, also software update also can not connect to the web. Everything else works-email, web browsers, ftp connnections. the onlything that cannot connect is itunes and software update. I tried reinstalling Itunes 8 but I have the same problem.
    help!

    There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet.  Do I have any options?  Thanks!

    Friends,
    I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine.  I'm thinking that a routine OS upgrade might help.  However, this machine is not connected to the internet.  Are there any alternate methods for upgrading system software?  Thanks in advance!

    OK, what you should do is download the updates on another machine and burn them to a disc.  Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates.  Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install.  Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
    My suggestion is this: if it looks like you might need a download, get it onto that disc.

  • HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    Hi, jeantwin.
    Thank you for visiting Apple Support Communities.
    The steps in the article below may help you resolve the issue with push notifications.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    If the issue persists, try signing out of your Apple ID and then sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Jason H.

Maybe you are looking for

  • Early watch alert task not created in SDCCN in satellite system

    Hello Everyone, I am trying to configure EWA in solution manger 7.0 ehp1. I have added the system in SMSY, created RFC SM_SIDCLNTXXX_READ and SM_SIDCLNTXXX_TRUSTED in solution manger and also created RFC SM_SIDCLNTXXX_TRUSTED and SM_SIDCLNTXXX_BACK i

  • How do I get Facebook to link with games?

    I have games that I play on my PC, but they won't link up on the iPad. I am sign into FB. Just can't figure it out. Please help.

  • Help me: I have locked user cn=orcladmin in oid

    Hello. Pleas help me, I have locked user cn=orcladmin in oid production environment I have tried to unlock with this procedure, but It doesn´t work: [oracle@appamucm01pro admin]$ /opt/oracle/mw/mw_idm/Oracle_IDM/ldap/bin/oidpasswd connect=OIDDB unloc

  • Opening of photos in brigde CS6 not working properly

    Bridge CS 6 is opening photos in windows instead of photoshop (since I installed and deinstalled CS4) Any solutions how to reset this? Thanks Iris

  • Can't see all tools in Photoshop Elements 11 on Mac

    I just got Photoshop Elements 11 for my mac today however I cant seem to use all the tools. The tool bar cuts off after the cookie cutter option in modify and I cant scroll down to reach the rest of the opions. Is there anything I can do to see the r