Full Aperture vs. Trial?

Hello
what is the big differens on the full Aperture and the trial version? what do you get on the DVD/CD extra??

The DVD includes the manuals and sample projects.
Also, per the trial page on apple.com: "The Aperture 2 trial cannot upgrade a library created by Aperture 1.5. Upgrading 1.x libraries is supported only in “licensed” versions of Aperture 2, as opening an earlier 1.x library with the Aperture 2 trial would permanently “upgrade” the library."

Similar Messages

Full ABAP Edition-Trial Problems

Hi
I have downloaded and installed the Full ABAP Edition-Trial (with Web Dynpro for ABAP!) from SDN site. However I am not able to use it, as I am getting the following error:
partner not reached(host 10.10.0.10, service sapdp00)
WASECONNREFUSED: Connection refused
Also in MMC i find that the Dispatcher shows the status as stopped. Initially says Running but not connected to Message Server. Its yellowin color but then suddenly stops.
I have followed all the installation prococedure which was provided, but it does not work.
Plz help me out. Helpful answers will surely be rewarded.

Hi,
I faced similar problems when am not connected to the VPN. so check if u r connected to VPN, if u have one before logging on to SAP system.
regards,
madhu

Full ABAP Edition-Trial: no installation of maxdb???

Hello to all,
I installed "Full ABAP Edition-Trial" some days ago and everything worked fine without any problems. Windows on partition H: and programs (like sap and sapdb) on partition L:.
Because of an other problem I had to reinstall Windows on H:. I deleted the subfolders L:\SAP and L:\sapdb. to get a clean world for sap.
I start the installation process and setup asks me the path to install sap. I enter "L:\SAP". In the next screen it asks me about the database master password. I enter my password. In the next screen the setup tolds me to install the components MaxDB to L:\sapdb and application server to L:\SAP\NSP. Total Size: 18823.1 MB needed (By the way: I have 40 GB free).
I press the install button and installation process runs without errors. Then (after 2 minutes!) I get the screen that tolds me "The InstallShield Wizard has successfully installed SAP Netweaver 2004s ABAP Trial Version.".
So I start the SAP Management Console and start the instance. The icons become green and I see for example that the processes msg_server.exe and dispwork.exe are running. Dispwork.exe stops after a few seconds.
Looking to the system log I see "Communications data: Service initialization failed" and some "SAP-Basis System: Initialization DB-Connect Failed, Return Code 008192" messages.
When I press the database icon in the the SAP Management Console, I get a screen "page could not be displayed".
So it seems like a database problem. I look to the windows explorer and there is only the SAP-folder (with 341 MB). THERE IS NO SAPDB-FOLDER!!!
I can't find an installation-log to see if there were problems (No log.txt at SAP\NSP).
I deinstalled everything with deinstaller, run some registry cleaner and also installed a clean windows at H:, but everytime the same. I find note 572836 (Deleting SAPDB Registry entries and services) but it doesn't help.
I know when I installed SAP the first time (where it worked fine), I had not to install the microsoft loopback adapter. So I tried the installation with and without the adapter. No success!!!
I get crazy about it... Perhaps there is something wrong about the preinstalling environment: I download the two files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part2.rar to the folder L:\downloads. Then I unpack only the first one SAPNW2004sABAPTrail_part1.rar in the same folder. Then there is a new folder SAPNW2004sABAPTrail_part1. This one contains a folder SAPNW2004sABAPTrail. There are some folders and files. I change to the folder images. There I start the setup.exe (but before I installed the lookback adapter).
I'm a little bit irritated about the files SAPNW2004sABAPTrail_part1.rar and SAPNW2004sABAPTrail_part1.rar. The first one has a size of 1536000KB and the SAPNW2004sABAPTrail_part2.rar has a size of 1249739KB. Just for analyze I unpack the SAPNW2004sABAPTrail_part2.rar-file and see that it has exactly the same structure like SAPNW2004sABAPTrail_part1.rar!!! Also the size of the unpacked files are the same. Is this normal???
So, that's my problem: No database here. Anyone here who has an idea? Please help me. I really need ABAP here!!!
Kindly regards,
Andy

I have found the InstallationSteps.stat and install.log. Everything seems to be installed successfully, but no database is mentioned :-(. Here are the two files.
I still need help!!!
=Start of InstallationSteps.stat====================
CreateDirectories;20070108204154;20070108204155;Succeeded
CopyExecutables;20070108204155;20070108204157;Succeeded
AdaptProfiles;20070108204157;20070108204159;Succeeded
AddToServices;20070108204159;20070108204207;Succeeded
StartSCSInstance;20070108204207;20070108204232;Succeeded
StopSCSInstance;20070108204232;20070108204233;Succeeded
CreateXUserEntry;20070108204233;20070108204234;Succeeded
RestartServiceViaSAPControl;20070108204234;20070108204305;Succeeded
InstallMMC;20070108204306;20070108204308;Succeeded
=End of InstallationSteps.stat====================
and here is the install.log file:
=Start of install.log ====================
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateDirectories
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:55
ACTION: * Logfile: steps.CreateDirectories.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateDirectories <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CopyExecutables
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:56
ACTION: * Logfile: steps.CopyExecutables.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
COPY_EXECUTABLES: Copy log converter (lc.jar) to users home directory
COPY_EXECUTABLES: Copy SDC log viewer (slv.jar) to users home directory
COPY_EXECUTABLES: Prepare environment for engine configuration:
COPY_EXECUTABLES: Copy jperflib.dll to actual working dir.
COPY_EXECUTBLES: Create startup and stop scripts in engine bin folder.
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_startSystem.cmd,L:\SAP\NSP\SYS\exe\run,startSystem.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_startSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd,L:\SAP\NSP\SYS\exe\run,stopSystem.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_stopSystem.cmd
Keys:
Sections to process:
copyFileWithProcessing(L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd,L:\SAP\NSP\SYS\exe\run,strdbsj2ee.cmd)
Reading file L:\SAP\NSP\home\additional_sw\t_strdbsj2ee.cmd
Keys:
Sections to process:
COPY_EXECUTABLES: Finished ....
SUCCESS: Execution of step: >> CopyExecutables <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AdaptProfiles
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:57
ACTION: * Logfile: steps.AdaptProfiles.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
ADAPT_PROFILES: Start to create the profiles
CONFIGURATION: Create JDBC Path in J2EE installation directory.
CONFIGURATION: New JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee\jdbc (Exist=false)
CONFIGURATION: Old JDBC Path: L:\SAP\NSP\DVEBMGS00\j2ee (Exist=false)
CONFIGURATION: New JDBC Path created.
CONFIGURATION: Copy Jars from: L:\SAP\NSP\_installTemp\j2ee\INSTALLER\COMMON\JDBC\ADA
CONFIGURATION: to : L:\SAP\NSP\DVEBMGS00\j2ee\jdbc
ADAPT_PROFILES: Create profiles for standalone J2EE
copyFileWithProcessing(additional_sw/t_DEFAULT_PFL_710,L:\SAP\NSP\SYS\profile,DEFAULT.PFL)
Reading file additional_sw/t_DEFAULT_PFL_710
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_START_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_START_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_SID_INSTANCE_HOST_710,L:\SAP\NSP\SYS\profile,NSP_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_SID_INSTANCE_HOST_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_START_DB_INIT_710,L:\SAP\NSP\SYS\profile,START_DVEBMGS00_AMMERSEE)
Reading file additional_sw/t_START_DB_INIT_710
Keys:
 WITHOUT_SHARE
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
finished reading Section WITHOUT_SHARE
copyFileWithProcessing(additional_sw/t_strdbmsONCE.cmd,L:\SAP\NSP/SYS/exe/run/,strdbmsONCE.cmd)
Reading file additional_sw/t_strdbmsONCE.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
copyFileWithProcessing(additional_sw/t_setsapenv.cmd,L:\SAP\NSP/SYS/exe/run/,setsapenv.cmd)
Reading file additional_sw/t_setsapenv.cmd
Keys:
Sections to process:
[JDK_CONTAINER, WITHOUT_SHARE]
SUCCESS: Execution of step: >> AdaptProfiles <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: AddToServices
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:41:59
ACTION: * Logfile: steps.AddToServices.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
AddToServices: Instance shall not be started by default.
AddToServices: Therefore we provide a start script in:
AddToServices: L:\SAP\NSP\home\startEngine.bat
AddToServices: Service will be created.
DEBUG: Register service with the following command:
DEBUG: "L:\SAP\NSP\SYS\exe\run/sapstartsrv.exe" -r -q -s NSP -n 00 -p L:\SAP\NSP\SYS\profile\START_DVEBMGS00_ammersee
Start external command...
Service succesfully installed.
Process exited with rc: 0
SUCCESS: Execution of step: >> AddToServices <<
 finished successfully.
 Elapsed time: 00:00:07 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StartSCSInstance
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:07
ACTION: * Logfile: steps.StartSCSInstance.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\antlr.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_compatibility.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\base_services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.api.perm.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com.sap.security.core.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\common_cache_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\com_sap_tc_jtools_jver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\exception.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\i18n_cp.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\iaik_jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\jts_jco.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\logging_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqljts.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\opensqlsta.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\remserver.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\resources.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\rfc_container_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\sapxmltoolkit.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\services_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\transport.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_jts_extensions_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\ume_service.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_admin_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_impl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_internal_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_kernel.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_trace_api.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\cfw\lib\vmc_util.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jenqulib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\charsets.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jce.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\jsse.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\rt.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\local_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\security\US_export_policy.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\jre\lib\sunrsasign.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jkit\lib\tools.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jperflib.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartup.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupapi.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\jstartupimpl.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\frog.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\sapmc.jar
Adding to classpath: L:\SAP\NSP\SYS\exe\run\servicehttp\sapmc\soapclient.jar
Starting SCS-Instance
Executing SCS-startup-command: L:\SAP\NSP\SYS\exe\run\startsap.exe name=NSP nr=00 SAPDIAHOST=ammersee
Execute in current working dir: L:\SAP\NSP\home
Start external command...
\ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ STARTSAP continues...
Process exited with rc: 0
SUCCESS: Execution of step: >> StartSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:23 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: StopSCSInstance
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:32
ACTION: * Logfile: steps.StopSCSInstance.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Checking running engine process via sapcontrol and wait for stopped
Checking on: SCS
Stop instance with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function StopWait 300 10
Stop instance in directory: L:\SAP\NSP\SYS\exe\run
Start external command...
08.01.2007 20:42:33
Stop
OK
08.01.2007 20:42:33
StopWait
OK
Process exited with rc: 0
Start external command...
08.01.2007 20:42:33
GetProcessList
OK
0 name: msg_server.EXE
0 description: MessageServer
0 dispstatus: GRAY
0 textstatus: Stopped
0 starttime: 2007 01 08 20:42:20
0 elapsedtime: 0:00:13
0 pid: -1
Process exited with rc: 4
SUCCESS: Execution of step: >> StopSCSInstance <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: CreateXUserEntry
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:34
ACTION: * Logfile: steps.CreateXUserEntry.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
SUCCESS: Execution of step: >> CreateXUserEntry <<
 finished successfully.
 Elapsed time: 00:00:00 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: RestartServiceViaSAPControl
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:42:34
ACTION: * Logfile: steps.RestartServiceViaSAPControl.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
Restarting service via sapcontrol
Restart service with cmd: L:\SAP\NSP\SYS\exe\run\sapcontrol.exe -prot PIPE -nr 00 -host ammersee -function RestartService
Restart service in directory: L:\SAP\NSP\SYS\exe\run
Start external command...
08.01.2007 20:42:35
RestartService
OK
Process exited with rc: 0
SUCCESS: Execution of step: >> RestartServiceViaSAPControl <<
 finished successfully.
 Elapsed time: 00:00:30 [HH:mm:ss]
Process exited with rc: 0
Start external command...
Active Loglevel: 4
ACTION: **********************************************************************
ACTION: * Install SAP J2EE Engine 4 Web Application Server 700/710/720 ... XXX
ACTION: *
ACTION: * Executing Step: InstallMMC
ACTION: * User: Fasan
ACTION: * WorkingDirectory: L:\SAP\NSP\home
ACTION: * Date: 2007.01.08 20:43:06
ACTION: * Logfile: steps.InstallMMC.log
ACTION: * Property File: L:\SAP\NSP\home\j2eeinst.props
ACTION: * Tool Version: 720.2.20060802095936
ACTION: **********************************************************************
INSTALL_MMC: Prepare to extract the SAPMMC
SAPMMC already extracted on cd. don't extract it a secon time.
INSTALL_MMC: Start to copy dll to SYSTEM32 directory
INSTALL_MMC: Copy sapmmc.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcada.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcdb6.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcinf.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy sapmmcms.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Copy librfc32.dll to H:\WINDOWS\SYSTEM32\
INSTALL_MMC: Start to copy the help file
INSTALL_MMC: Copy sapmmc.chm to H:\WINDOWS\help\
INSTALL_MMC: Start to copy the msc file
INSTALL_MMC: Copy sapmmc.msc to H:\WINDOWS\
INSTALL_MMC: Start to register dll
INSTALL_MMC: Register sapmmc.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmc.dll
INSTALL_MMC: Register sapmmcada.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcada.dll
INSTALL_MMC: Register sapmmcdb6.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcdb6.dll
INSTALL_MMC: Register sapmmcinf.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcinf.dll
INSTALL_MMC: Register sapmmcms.dll
InstallMMC: Registering dll with the following command: regsvr32 /s sapmmcms.dll
SUCCESS: Execution of step: >> InstallMMC <<
 finished successfully.
 Elapsed time: 00:00:01 [HH:mm:ss]
Process exited with rc: 0
=End of install.log ====================

Unable to install Full ABAP Edition-Trial

Hello Gurus,
I am unable to install Full ABAP Edition-Trial.
When it comes to more than 80% (status message shows : initializing database connection), after sometime it starts uninstalling.
Then it shows a message prompting to see the error log. the error log file is as shown below.
Start of log********************************
(Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 5:38:09 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 15, 2006 5:38:14 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 5:38:14 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file C:\SAP\NSP\log.txt for details.
(Oct 15, 2006 6:13:02 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
 at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
End of log****************************
Can you guys (and gals ofcourse) please help me??
I have tried it 5 times atleast and everytime i have verified the system requirements.
I have installed loopback adapter, in other words i have done everything that is specified in the instructions.
Thanks and Regards,
Haseeb.

Hello all!
Sorry for the late response.
My installation of sap worked.
It was the firwewall. I shut them down and it worked.
Thanks a lot!!!!

This was my error message:
(Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details. (Nov 21, 2006 10:29:21 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
If you have still problems with uninstalling SAP here is the way I did it:
1. Delete folders SAP and sapdb. If you can not delete them, restart
 your windows in save mode. Then it is possible to delete them (I
 know it is not a sensitive method J ).
2. After that runt the RegCleanTool with prompt (sapstartsrv.exe u --
 this is the way you have to do it)
3. Then you can have a new try for installing SAP
Thanks again for your help
Bye

Full ABAP Edition-Trial (with Web Dynpro for ABAP) Max DB data volume

I recently installed Full ABAP Edition-Trial (with Web Dynpro for ABAP)- SPS08.
http://static.flickr.com/89/243544270_91e713e3a3_o.jpg
as you can see, it's already 92% acquired ( just after installation)
Is it correct?
or it's better to add another volume?
The other question is
according to the license installation guide,
it sounds like we can delete the temp licese with SAP*.
so I did like that but i got the following message
http://static.flickr.com/81/243546622_bc99d1af2b_o.jpg
Well, I could delete the old license with BCUSER.
Thanks,
David

Hello,
to your first question.
The MaxDB database has a feature which can
increase the database automatically.
This ( auto_extend ) is turned on for the SDN Preview
installation.
That means the database should extend a further datavolume
automatically when the filling level gets over 90%.
In your case the database already added two more datavolumes. The installation only creates one.
Best regards, Stefan

Canon 7D Raw Support in Aperture 2 after installing Aperture 3 trial

Hi!
I'm having a really weird problem! A few months ago I purchased Aperture 2 and have been working with it ever since. About a week ago I installed the Aperture 3 trial to see what the general differences are. After playing with it I noticed not enough "useful" changes compared to Aperture 2 to actually purchase Aperture 3. So I removed Aperture 3 and went back to my good old Aperture 2.
Two days ago I bought the Canon EOS 7D, but when connecting to my Mac the Raw files are not supported by Aperture 2! While I was trying out Aperture 3 I used software update to update Camera Raw as well and it seems that Camera Raw Update 3.2 enabled Aperture 3 to work with my 7D's raw files but disabled Aperture 2 to support them! I searched the Apple support pages for older versions of Camera Raw and came across version 2.7 which should enable Aperture 2 to work with the EOS 7D. But as expected, I cannot install 2.7 because 3.2 is already installed!
Does anyone know wether it's possible to "downgrade" camera raw to version 2.7? Or is there any other solution to my problem? It can not believe that an innocent Aperture 3 trial forces me to actually upgrade to Aperture 3 because Aperture 2 now refuses to support my brand new 7D?! Is there anyone on this forum familiar with this problem and able to help me? Many thanks in advance!
Kind regards,
Mick van Jaarsvelt

I am running with same type of problem. I have Aperture 2.0 and can not work the Raw files from my Canon 7D. I have no problems working Raw files from my old Rebel Canon camera. Did you solve your problem?

Can you create a book from the Aperture free trial?

I have created a book on the Aperture free trial and can't seem to buy it. Is there any way I can or can I not buy a book off of the Aperture free trial?

The free trial is a fully functioning version of Aperture so you should be able to buy a book with it. What problems are you having?

Is the aperture 3 trial version different from the original?

Hello,
I am working on organizing my photos trying out the aperture 3 trial version. I'm thinking of getting the original one but before I actually organize my libraries I want to know if there are any differences I should know about that might affect my work launching the original version. Also, does the original work the same with the Duplicate Annihilator?
Thanks in advance!

The trial version is a fully functional version of Aperture. If you decide to continue on with it you can just authorize the trial copy once you get our key. The only difference is the name of the default library the trail and non-trial versions create. But you can always rename the library if you wish.
All this applies to the CD version, if you eventually buy from the App Store I'm not sure what the procedure would be. But in any case the library created with the trial should be useable by the App Store version.
One thing to keep in mind, if you add images to the trial version and use it then decide not to keep Aperture you'll be able to retrieve your master files but any changes made will be lost.

Please help me with this aperture 3 trial version installation guide, asap!

I have aperture 2 (licensed volume) already installed and when I tried to install this aperture 3 trial version install, I have got this message "A licensed copy of Aperture has already been installed in the Applications folder. To install the Aperture 3 Trial, rename your existing copy of Aperture, then run this installer again." And when I tried to rename Aperture under this application folder to Aperture 2, I have got this message "You do not have sufficient access privileges to rename the item "Aperture" ", even though I m the admin user by checking "System Preference" >> "Accounts". Realli appreciate if anyone can explain how to install aperture 3 trial version with Aperture 2 installed, steps by steps clearly. and how to work around with the Aperture library when Aperture 3 is installed with Aperture 2 already installed. Thanks

You have a permissions problem with your applications folder. There are multiple ways to fix this, if you read up on repairing permissions.
The easiest solution is to just Duplicate your Aperture 2 application instead of renaming it. (highlight it and press command-D). You'll get "aperture copy" and you will have permission to change its name.

Installation error: Full Java Edition2004s-Trial

Im trying to install Full Java Edition2004s-Trial and I got the below errors. Please help
FJS-00003: TypeError: dir_profile has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 39637: ???)
MUT-03025: Caught ESAPinstException in Modulecall: executing JS script failed.
FCO-00011: The step getSID with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|getSID was executed with status ERROR .

Hi,
Have u checked it if not then have a look
Re: NW 2004 SP 11 Sneak Preview: FJS-00003 TypeError: webas has no properties
May be it helps u.
Regards
Subhash

Aperture free trial installation

I just downloaded the aperture free trial and cannot get it to open. every time I go to applications and try to open it, it just asks me to install it, again and again. what am I doing wrong?

A Pro-application needs a trial version - I agree.
Send feedback to Apple: http://www.apple.com/feedback/aperture.html, they will not hear you here.
But it will be also your loss, if you do not give Aperture a chance - it is really a great program.
You can learn a lot about Aperture by trying it out at the nearest Apple Store, and by looking at the resources (Tutorials etc.) at the Aperture Support page, also have a look at the Aperture 3 User Manual
You might just reconsider
Regards
Léonie

Aperture 3 Trial: Empty Email

I signed up for the 30-day trial, and received and email with the subject line "Getting started with your Aperture 3 trial". However, the body of the message was empty... no serial number, download link, etc. Has this happened to anyone else?

I tried and never got a mail. After about 30 minutes I assumed I must have typo'd and tried again... still nothing. That was probably over an hour ago.
A friend of mine just did it and got the message instantly (and with all the correct info).
I checked the "junk" folder (just in case it got mis-flagged)... nothing. Finally, I decided to try just one last try... and +this time+ I got the reply message instantly.
I'm guessing they were having problems with their request system.

Aperture 2 trial freezes occasionally

I'm using the Aperture 2 trial, downloaded from the apple site, and I would like to purchase it when my trial expires. The only thing is about 75% of the time when i launch the trial from my dock it gets to the splash screen and then freezes. If i force quit and then open it again immediately after the initial freeze it'll get to the splash screen then ask me if i want to continue, register, etc. like it normally does on launch.
Does anyone know why it usually freezes up at the initial splash screen?
Thanks

I have the same problem, but more frequently. Like, ALWAYS. After working with Aperature enough to decide I wanted to buy it. I've got several thousand images imported already and all of a sudden the trial freezes at the splash screen and it's impossible to get beyond that point. Forcing Quit, even rebooting the Mac will not solve the problem. The last action I took was copying an existing Web theme folder and altering some of the HTML in the template pages of the copy but the freeze is unrelated to web gallery generation. There's something wrong at startup and now I'm faced with not being able to run the program, purchase it, and lose all the work I've already done with my photos in anticipation of buying the darned thing...

Why Even after buying it shows Aperture 3 Trial library?

How to change "Aperture 3 Trial Library" to "Aperture 3 Library"

Quit Aperture and then change the Library's name in the Finder. The next time you start Aperture you might get a window asking you to show it where your Library is. (You can have multiple Libraries and choose which is in use either by double-clicking on it or holding the Option key when you start Aperture.)

My Aperture 3 trial ran out... export options?

So I accidentally let the time run out on my Aperture 3 trial. I did some photo organization in it, as well some editing and geotagging. Is there any way I can now export my photos including the changes that I made? I'm thinking that maybe it's too advanced for me and that I'm just going to get the newest iPhoto instead. However, I'd hate to have to make all of the changes to all of my photos again... Any help? Thanks!

TriviallyTravis wrote:
Thanks for the reply, Frank. In the event that I'm able to find a way to extend my trial or something like that, how would I have gone about exporting the versions that retained any adjustments I made?
In this case you would have been able to export the versions which reflect the adjustments you made. The adjustments would have baked into the image I didn't mean to imply that the adjustments themselves (increase in exposure, decrease contrast, etc) would have beed available as such to another program.
Also, I thought that Aperture and iPhoto were made to work closely together.
Not sure where you got that idea but its not totally correct. The way the two programs interact is as follows:
Aperture is able to access the iPhoto library in order to import it into itself. When you do this metadata such as keywords and the EXIF data is imported along with the images into Aperture.
The only access iPhoto has to the Aperture library is as any other program that accesses the Aperture previews via the media browser.
Why then is it that they wouldn't retain metadata between the two products? Say if somebody had put a lot of work into iPhoto and then decided to move to Aperture... That's a little annoying =/
Migrating from iPhoto to Aperture will retain your iPhoto information. There is no reverse migration, that is you can't somehow export the Aperture library and import it into iPhoto.

Full Aperture vs. Trial?

Similar Messages

Maybe you are looking for