Full list of database fields not showing in Database Explorer

Good Afternoon,
After a recent upgrade to Windows 7 which included having Crystal Reports 2011 reinstalled on to the PC, I am now unable to open the full list of database fields when connecting to an ODBC.
I can open old reports and refresh them without issue, but I cannot create new reports.
Any suggestions gratefully received at this point
Thanks in advance
Andy

What type of database are you connecting to? Is your Win7 machine 32- or 64-bit? If it's 64-bit you need to create a 32-bit odbc connection. If you're connecting to SQL Server, make sure that you have the "SQL Server Native Client" version 10 or 11 installed - the connection doesn't work well with the version 6 SQL Server ODBC driver that's installed as part of Win7.
-Dell

Similar Messages

Database tables not showing in database profile although connection is established successfully

I am using jdbc driver jtds 1.2.6 to connect to sybase db via powerbuilder.The connection is established successfully,still,it just shows the profile as connected but loads no table or contents of databse in that coonnection.
Do I have to run any stored procedure in sybase db for this?
Any clue?Please help.

Yes, you do need to run a stored procedure. It's described in the PowerBuilder documentation.
As Chris said you'd be far better off using the native interface driver. I've never heard of it being separated out anywhere, so if your installation software for ASE does not include OpenClient, then I doubt that it's a genuine copy of the software.

Text Fields Not Showing in Design or Live View

Hello Everyone,
I have run into a problem trying to create a simple contact form through Dreamweaver CS6. I have two text fields for Name & Email, and 1 text area for Comments. The issue I am running into is that the text fields are not showing in Design or Live view. I have set-up all variables required for the server for the form to work... but that should not have any effect on the text field showing... I tried uploading my contact page with the same result of no text fields showing...
What is really laughable is that the "text area" I placed in my form for Comments shows up in Design & Live view just fine. I am thinking that I am missing something, but just do not know what exactly. The form is styled through CSS.
Here is the form code:
     <div id="CRDForm">
       <form action="http://www.sweetformimi.com/formmail/formmail.php" method="post" enctype="application/x-www-form-urlencoded" name="contact" target="_self" id="contact">
    <input type="hidden" name="env_report" value="REMOTE_HOST,REMOTE_ADDR,HTTP_USER_AGENT,AUTH_TYPE,REMOTE_USER">
    <input type="hidden" name="recipients" value="[email protected]" />
    <input type="hidden" name="subject" value="Contact Form" />
         <label><p>Your Full Name
           <input name="Name" type="text" id="Name" size="40" /></p>
         </label>
         <label><p>Email
         <input name="email" type="text" accesskey="2" tabindex="2" title="Email" value="Email"></p>
         </label>
         <label>Comments<br />
         <textarea name="comments" cols="40" rows="10" accesskey="3" tabindex="3" title="Comments"></textarea>
         </label>
         <input name="submit" type="submit" accesskey="4" tabindex="4" title="submit" value="submit">
       </form>
    </div>
Are there other variables I should be thinking about in the rest of my site? I am using a fluid grid layout. I have CSS for desktop, tablet, and phone devices. I also have a primary CSS file that imports all three. The sites structure was done by using <header>, <article>, <footer>, and of course <div> tags.
Has anyone ever experienced the "text fields" not showing up before? Is it a simple fix as reinstalling Dreamweaver CS6? Finally, another thing I should mention is that I did have a previous version of Dreamweaver on my comp, which was CS3. I did not uninstall that before installing the newer version. I assumed (and I could be wrong here) that it would automatically replace the older version.
I apoligize for it being long winded, but I am looking for some help on this issue...
Thank You

Hey thank you osgood for the reply!
When I look at code for long hours it sort of blurs together, and I miss things... I think that happens to the most of us
Ya I found what was blocking my text fields in my desktop.css
I primarily work through code view, and currently working on quite a few projects kind of makes your eyes miss the small errors.
Thanks again!

In the source list contract Number is not showing up.

On 10.11.2010
we added this Material 2211583 to contract 4600000149.
When we do display source list it is still not showing up.
Contract 4600000149 Validity Start 04.02.2008 Validity End 31.12.2009
We have changed validity End date for Contract to 31.12.2010;even then it is not showing up in source list
Is there any possibility to get Contract number in the source list
Thanks in advance
SAP MM

what did you do to get the contract into the source list for this item?
it does not create a source list item by itself, only because you entered the item in a contract.
You can either create the source list entry from the contract via menu. or you have to enter the contract manually in ME01 or you generate the source list with ME05

User parameter are not show in database using Servlet and java Bean

Hello Sir,
when I insert the parameter in run time, weblogic server and JSP show that parameter are saved.
Allthough row increment in database but they not show in database.
Here My Code:
login.html:
<html>
<head>
<title>A simple JSP application</title>
<head>
<body>
<form method="get" action="tmp" >
Name: <input type="text" name="user">
Password: <input type="password" name="pass">
<input type="Submit" value="Submit">
</form>
</body>
</html>LoginServlet.java:import javax.servlet.*;
import javax.servlet.http.*;
public class LoginServlet extends HttpServlet{
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException{
try
String user=request.getParameter("user");
String pass=request.getParameter("pass");
co.SimpleBean st = new co.SimpleBean();
st.setuserName(user);
st.setpassword(pass);
request.setAttribute("user",st);
request.setAttribute("pass",st);
RequestDispatcher dispatcher1 =request.getRequestDispatcher("submit.jsp");
dispatcher1.forward(request,response);
catch(Exception e)
e.printStackTrace();
}SimpleBean.java:
package co;
import java.util.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.sql.*;
import java.util.*;
public class SimpleBean {
private String user="";
private String pass="";
private String s="";
public String getuserName() {
return user;
public void setuserName(String user) {
this.user = user;
public String getpassword() {
return pass;
public void setpassword(String Pass) {
this.pass= pass ;
public String issueData()
try
System.out.println("Printed*************************************************************");
Class.forName("oracle.jdbc.driver.OracleDriver");
System.out.println("Connection loaded");
Connection con=DriverManager.getConnection("jdbc:oracle:thin:@VijayKumar-PC:1521:XE","SYSTEM","SYSTEM");
System.out.println("Connection created");
PreparedStatement st=con.prepareStatement("insert into vij2 values(?,?)");
System.out.println("~~~~~~~~~~~~~~~~~~~~");
String NAME=getuserName();
st.setString(1,NAME);
String PASSWORD=getpassword();
st.setString(2,PASSWORD);
st.executeUpdate();
System.out.println("Query Executed");
con.close();
s= "Your logging is saved in DB ";
System.out.println("Your logging is saved in DB *****************");
return(s);
catch(Exception e)
e.printStackTrace();
return "failed";
}submit.jsp:This is Submit page
<jsp:useBean id="st" class="co.SimpleBean"/>
<jsp:setProperty name="st" property="*" />
<jsp:getProperty name="st" property="userName" /> <br>
<jsp:getProperty name="st" property="password" /> <br>
<% st.issueData();%>
<%
out.println("Ur data is saved in DB");
%>Please Help me.
Thanks.

Ok, this seems to be a long and convoluted path to do absolutely nothing.
You submit the form.
You run a servlet that gets the parameters correctly (good), creates a SimpleBean (good) and then sets this into request attribute space under the names "user" and "pass" - (why?)
You then forward to the jsp: submit.jsp.
Submit.jsp creates a new SimpleBean, and attempts to populate it with <jsp:setProperty>. You then call the issueData method on it.
Your complaint: Rows are being created in the database which have empty string values instead of the parameters you have passed.
So, why are the values blank? Where do you think these values should be coming from?
Looking at SimpleBean we find one mistake - you have mis-named your get/set methods.
To properly follow java beans standards, you should use camel-case for your methods.
Rather than getuserName() the method should be getUserName(). getpassword() should be getPassword() etc etc.
The method getUserName() defines a property "userName" for the bean.
Once that is fixed, lets go to submit.jsp. The <jsp:setProperty> statement will try and set all properties of the bean from the request parameters.
There are no request parameters "userName" or "password" so those values don't get set in the bean, therefore it uses their default value of empty string - "".
There ARE request parameters called "user" and "pass" but because they aren't properties of the bean, they get ignored.
As a result, the values are empty string, and that is exactly what gets inserted into the database.
Ways to fix this
1 - rename your parameters on your form to be "userName" and "password" to match the bean. That way the <jsp:setProperty> tag will populate them properly.
or
2 - Call issueData() method from your servlet after you have created the SimpleBean. Better in my opinion as you then don't have any scriptlet code on a JSP page.
Cheers,
evnafets

EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

External WD Hard Drive Not Showing In File Explorer

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?

My External WD ( 500GB My Passport) Hard drive Is Not showing In File Explorer...I Have Tried Re-installing It But Nothing Worked....Any Idea About Solving This Problem Without Losing Any Data ?
a lot of these USB disks are garbage. Remove the hard disk from the case and connect it to an available desktop which will be able to read the disk.
the cheap usb controllers are often the cause of the problem
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Inserted html not showing in Internet Explorer

Inserted html code does not show in internet Explorer 8. Is OK with Firefox, Safari and Chrome. Site is munroestudios.com. Also made a a test page with just the html on munroestudios.com/test.html. This is a iframe code received from another company to link to another site.

I'm not sure what they did but the company supplying the html code fixed something on their end. Works now.

The configured database is not a compatible database

Hi, i am experiencing some problems getting our zen servers to carry out
reporting, auditing, etc etc.
Running :
Netware 6.5 sp5
Zenworks Desktops managment 6.5sp1
When i attempt to carry out a report or click on the zenworks inventory
databse object within Console1 - the following error appears:
"the configured database is not a compatible database"
I have checked the Tids below but the settings have not changed:
http://support.novell.com/docs/Tids/.../10097366.html
and (even though this applies to zenworks 7)
http://www.novell.com/documentation/...a/aic80cg.html
I do not know what else to do.
Any assistance on this would be greatly appreciated.
regards
Dennis
IT Support

Dennis,
>
>Hi, i tried something along the lines of your advice, i used the console1
>from the server hosting the zenworks inventory server.
>
>I copied this to my local pc as this would be alot more quicker...and when
>i tried the Inventory reporting ...IT WORKED!!!!
>Resolved the issue of receiving the error message
>"The configured database is not a compatible database"
Nice.
I have seen that happen before and it was caused by Snapin versions. The
error message is a bit bogus. But if you are not seeing issues on the asa
screen of the server, then it's likely not the servers problem, but c1's
problem.
Jared Jennings - Data Technique, Inc.
Novell Support Forums Sysop
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org

Webpage does not show in Internet Explorer but does show in all other browsers?

I have created a webpage, www.nqms.co.uk, it does not show on Internet Explorer. I have tried to troubleshoot via the net and have used a CSS check program etc. but it still won't appear. Any help would be gratefully received.

Add the closing --> comment tag to your css section before the closing </style> tag (see below)
.style3 {font-size: 8pt}
-->
</style>

Created By and Created Date fields not showing up on Custom List form webpart

Hi,
I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
<td width ="400px" valign= "top" class="ms-formbody">
<xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
</td>
However these fields are not showing/populating data on the form ?? Any inputs ???
Regards

Hi,
I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
Hope it can help you.
Xue-Mei Chang

HP Full Software and Driver does not show on "Printers & Drivers" list.

I am staying at a friend's house which has an HP 7360. I downloaded the HP Full Software and Driver an attempted to make a wireless connection and it does not show on the printers and drivers list. What do I do to make it appear as a printing option?
Thanks
BikeGuy33

Just install the software that you downloaded, and it should come up automatically.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

EM does not show standby database in database list

Hi All,
I am little bit surprised, that i am not able to get the status of standby database or you can say that standby database is not discovered in EM whereas primary database is discovered in the EM grid control
Grid control is Oracle 10g 10.2.0.5.0
Db version :- 11.1.0
I am getting the status of both the database from DGMGRL CLI

Ok i done the troubleshooting from my own.
What i did is uninstall agent on the second machine whose db is not discovered and reinstall the agent back.
Now the problem is sorted out.
But now the problem again arises. I am able to get the status of standby database on OEM grid control. But when i try to perform change of data protection mode, i am getting error that Database standby is not discovered. This problem arise from em grid control only.
Please advice over the same.

Text field not showing record set options

I entered the following php code to a text field in a form:
<p>
      <label for="date">Select Available Date</label>
      <select name="date" class="text" id="date">
        <option value="0" selected="selected">select your preferred travel date</option>
            <?php while ($row_rsDep = mysql_fetch_assoc($rsDep)) {
                  echo '<option>' . date('d.m.Y',strtotime($row_rsDep['Start_Date_Eur'])) . ' - ' . date('d.m.Y',strtotime($row_rsDep['End_Date_Del'])) . '-' . $row_rsDep['Itinerary_Code'] . '</option>';
          ?>
      </select>
    </p>
In the text field it shows only the option=0 "select your preferred travel date" and does not show the rest of the options as available from the database.
Any idea what is wrong with my code?
Thanks,
zabberwan

I do have it showing in the sidebar showing as a repeating region. I commented it out and entered your code, but this time it shows nothing at all, not even an error!
The problem may have to do with "VIEWS" as I am working partly with Views on the external server. The server guys are having problems allowing Views. They did allow it for my account, but somehow this is not working. So I update my database leaving out the 3 tables created as views out of a total of 8. On the contrary on the local server the database is working fine, so that may not be the problem after all.
I had got it work a fortnight back, but lost it as I had to redo a few things with the forms it is in. On the sidebar it is working fine otherwise as a repeating region and showing all the dates of all itineraries. Only it's not working in the form, where it shows the preselected string (select your preferred travel date), but not the rest of the options.
About changing the email, one has to change the whole ID and profile etc. and then you can't log into your own account with the same user name, you have to have a different one, so that your own thread is no longer your own. What a pile of goons at the wheels! And what a disappointment with otherwise such a great bunch of forums.. I'll now have to contact the staff and would like them wipe out all my ID's and Profiles at Adobe and make a new one. It's such a rotten mess. This thing even ruined my ID at Adobe Browser Lab.
I suppose we'll leave it for Mr. Nobody to fix it, like so many other things especially around Christmas!
zabberwan

Some SQL fields not showing data in Crystal XI R2

I have a report that is using a stored procedure. In this stored procedure we have many fields that are being passed over to Crystal. A small portion of these fields do not show any data when you browse them in Crystal. But when you check on the SQL Server 2005 side, they contain data. So we know that the issue is probably on the Crystal side because there is data on the SQL side.
I originally thought that the problem may be caused by Null values in the database, but I used Crystal to convert the Null's to numeric zero if it was a number, and still there was no data showing up.
Also in the stored procedure, we are passing 2 parameters a start and end date. But that seems irrelevent to why some of the fields are not containing data like they should.
Why would some fields show no values at all, and some fields shows values?
Any ideas on how to correct this situation so data will show up for all the fields like they are suppose too?
Thanks everyone for their help!

Hi Levi,
Pleaase check the following :
1. Other than storedprocedure are you adding any tables to your report ? If so, check the links between your stored procedure.(Through Database Expert)
2.Write the following formula to find out whether the database fields contains values or not.
if isnull() or = " " Then
"This Field is Empty"
Else
Drag and dwop this formula in your report to get the field values.
Thanks,
Sastry

Full list of database fields not showing in Database Explorer

Similar Messages

Maybe you are looking for