Function Builder - Message no. DS027 Program names ZX... are reserved for i

I want to use " CALL CUSTOMER-FUNCTION '005'" within the function module IDOC_INPUT_STPPOD. But when I click on INCLUDE ZXTRKU13, I get the error message:
"Program names ZX... are reserved for includes of exit function groups".
What must be done in order for me to create and add my code to ZXTRKU13??
Regards,

No Problem Mate.
We've very Handy tool with name as "Abuse report" it never needs to Enqueue/Dequeue before pressed.So You can use freely(Whenever needed) this for yourself also .

Similar Messages

Program name zxvau02 are reserved for includes of exit function group

i am facing a problem during user exit.
when i am trying to change the code in function module (va01) in include zxvvau02
an error is occurred 'program name zxvau02 are reserved for includes of exit function group'
so i could not edit the include program.

Hi,
1. Find the appropriate Enhancement.
2. Enter the ABAP code in the "Z" program within the function module.
3. Create a project.
4. Add the Enhancement to the project.
5. Activate the project.
At the step (2), when I double click on the Include ZX* within source code of the function module to realize the exit, the
system would prompt to create the include. But NO, it always prompt that the name of include is reserved by SAP and I
cannot create it... I entered an access key for the object ...

Program names ZX... are reserved for includes of exit function groups means

dear all,
i am doing the enhacement SRVESSR for EXIT_SAPLMLSR_010 in this exit i got include, when i double click on the ZXMLUU19
i am getting the following error.
Program names ZX... are reserved for includes of exit function groups
regrds.
shashi

Hi,
When the warning message is displayed press enter key, System will prompt the message "Include ZXMLUU19 does not exist. Create Object? ". Select Yes option. Include will be created.
Regards
Vinod

Getting msg 'Program names L... are reserved for function group includes'

Hi all,
When I try to create a SAP standard Include which start with L, I get the message which says ''Program names L... are reserved for function group includes".
I have already created two standard SAP FMs.
Please let me know how should I go ahead and create the Include.
Thanks and regards,
Anishur

Hi,
When you create the Function group, then if you look at the Fucntion group in SE80, then tehre inlcudes will be created, for FORMS if it will create the includes, and for TOP it will create the include, for L also it will create the Incldue(L referefs coding of subroutines).
So, goto SE80 and activate the Include directly, then you can write the code in that include
Regards
Sudheer

Program names L... are reserved for function group includes

Hi All
Im involved in a migration project from GTS to ECC server where i have problem while creating a function group, when am creating a same include LZFR1T00 in ECC server am getting an error *'Program names L... are reserved for function group includes' Please help.
Thanks & Regards,
D. Sandeep.

I'm not sure what GTS is, but I guess you'll need to go to SE80 and create a function group (Z...). SAP will automatically generate the include with the L... name.

Standard pf-status and program name to down load for alv

standard pf-status and program name to down load for alv
Regarding
anil

Hi,
SAP Program for standard PF-Status is : SAPLKKBL
PF-Status : STANDARD Standard for General List Output
STANDARD_FULLSCREEN Standard for general List Output in Fullscreen Grid
Thanks,
Kishore

ZX... are reserved for includes of exit function groups

Hello SAPians,
For implementing screen exit , I tried to modify the following include .
It throws the warnig saying :
Program names ZX... are reserved for includes of exit function groups
Can u tell the way to make it editable
I appreciate ur idea
Thanks
Santhosh

It is just warning...
Press Enter to move ahead of the warning.
This comes when you try to implmenet the include of the user exit very first time.
Regards,
Naimesh Patel

Function module to display the programe name , title, linesize..etc

hi Guru's,
My requirement is to create a fuction module for displaying the classical report header and footer.
in header i need Program Name,Program Title ,page no, date , time , user..
Can any one provide me with function module.
cheers,
kumar.

hi,
you can make this type of FM or take help from this...
CALL FUNCTION 'Z_Z00_STD_HEADER'
 EXPORTING
 line_size = sy-linsz
 listtitle = sy-title
 EXCEPTIONS
 mandt_not_found = 1
 line_size_too_small = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
FUNCTION Z_Z00_STD_HEADER.
""Local interface:
*" IMPORTING
*" REFERENCE(LINE_SIZE) DEFAULT 80
*" REFERENCE(LISTTITLE) DEFAULT SPACE
*" REFERENCE(PARAM1) OPTIONAL
*" REFERENCE(PARAM2) OPTIONAL
*" EXCEPTIONS
*" MANDT_NOT_FOUND
*" LINE_SIZE_TOO_SMALL
data : pos_center1(3) type n,
 pos_center2(3) type n,
 pos_right1(3) type n,
 pos_right2(3) type n,
 tit_len type i.
Table to store the client name
DATA iT000 type T000.
Clear Internal Table
CLEAR it000.
Get client name from the T000 table
SELECT SINGLE MANDT MTEXT INTO iT000 FROM T000
 WHERE MANDT = SY-MANDT.
IF SY-SUBRC NE 0.
 RAISE MANDT_NOT_FOUND.
ENDIF.
if line_size < 75.
 raise line_size_too_small.
endif.
Initialize values of the position counters
pos_center1 = ( LINE_SIZE / 2 ) - 5.
pos_right1 = LINE_SIZE - 19.
pos_right2 = LINE_SIZE - 12.
tit_len = strlen( listtitle ).
pos_center2 = ( LINE_SIZE / 2 ) - ( tit_len / 2 ) - 1.
Write the standard header
First Line
uline at (line_size).
Second Line
WRITE: /3 text-010, "Report Text
 12 sy-cprog. "PERIASAS on 19/04/2004
WRITE AT pos_center1 iT000-Mtext.
WRITE AT pos_right1 text-006 RIGHT-JUSTIFIED. "Date Text
WRITE AT pos_right2 sy-datum RIGHT-JUSTIFIED.
Third Line
WRITE: /3 text-009, "Report Owner
 10 sy-uname.
WRITE AT /3 param1. "PERIASAS on 19/04/2004
WRITE AT pos_center2 listtitle.
WRITE AT pos_right1 text-007 RIGHT-JUSTIFIED. "Time Text
WRITE AT pos_right2 sy-uzeit RIGHT-JUSTIFIED.
Fourth Line
WRITE AT /3 param2. "PERIASAS on 19/04/2004
WRITE AT pos_right1 text-008 RIGHT-JUSTIFIED. "Page Text
WRITE AT pos_right2 sy-pagno RIGHT-JUSTIFIED.
Fifth Line.
uline at (line_size).
ENDFUNCTION.
with regards
Lokesh
Edited by: Lokesh Tripathi on Oct 16, 2008 12:32 PM

Program names ZX... are reserved for includes of exit function groups

Hi
I'm trying an enhancement example out of a SAP \ ALE | EDI book. I get the above error after performing the following steps :-
1 Via CMOD create an enhancement project.
2 Assign enhancement VSV00001 to the project.
3 Display components & select component EXIT_SAPLVV01_001.
4. Double click the include ZXVSVU01 which will then create it.
When double clicking I get the error in the subject.
Any ideas ?

Hi
That should be only warning: the system are saying to you you're creating an abap object reserved for enhancement, but it's what you have to do.
The system can't know you want to create an include for an exit, because you're in abap editor while doing the doubleclick.
So you can go on.
Max
Message was edited by: max bianchi

I purchased IPod touch for grandson and he has screwed up his ICloud and cannot remember email or password used to do the original setup. Now receiving message that no more ICloud accounts are available for this unit. Is there a way to work through this?

Grandson and friend just reset system several times and now neither can remember which email account or password was used to set up the ICloud account. I try to set up the account for him again and receive the message that no more accounts are available. I cannot reset because just like them, I don't know what they used. Surely, there must be some way to wipe out their settings and start fresh again?

Just connect to itunes and restore the ipod, when the restore is complete set it as a new ipod. Your problem must be resolved.

How come Flex Builder does not complain when semi-colons are omitted for AS3 statements?

Hi, I was wondering why my flexbuilder3 plugin for eclipse does not complain when and if I leave off a semi-colon at the end of an AS3 statement. Has anybody else experience this in their flex environments?
What can I do to fix this; as this is very annoying.
Thanks in advance!
Tonté

Hm... I see. Thank you all for your replies. I didn't realize AS3 does not require semi-colons at the end of AS3 statement unless there is more than one statement on the line. I will have to double check this for my self and report back. I guess I can't shake my Java habbits.
Thanks again!
Happy Flexing!
Tonté

Default Mapping Program name in SEEBURGER Adapter

Hi all,
Can any one help me with the default Mapping Program names supplied by SEEBURGER for EDIFACT D96a---->XML and Vice versa.
your help will be appreciated.
Thanks
Gopi

Hello Gopi,
It is as follows (I am assuming your EDIFACT message is:
ORDERS_UN_D96A)
E2X - See_E2X_ORDERS_UN_D96A
X2E- See_X2E_ORDERS_UN_D96A
Thanks
Abinash

Smartform program name

Hi everybody,
I have one doubt. I know only smartform name. now i want to know the program name of that smartform.
for example: if the smart form name is ZSMARTFORM
now what is the program name of this smartform. where does all these smartforms store. How to find the program name for a particular smartform.
thanking you,
with regards,
giri.

Hi,
NACE is the Tcode used to link the Application type, Output Types and its processing Routines like ( Driver programs and attached Script forms or Smartforms).
You should know the Application of a document first Like:
for PO it is EF, for sales Doc's it is V1, for Delivery docs it is V2, for billing Doc's it is V3 etc.
so first select the Application type (ex: EF) for PO and press OUtput types
then a list will come in that you should know the related output type for PO.
in this case it is NEU,
select that and click on the processing Routines button on the left side
it will display the Medium, Driver Program and the Script form or smartform related to that document..
cheers,
vasavi.v

Finding program name

Hi All,
There is a customized tab with details in a screen. How to see the customized tab details in the program. When I go and see in the status and program name, there are many includes written over there.
I just want to go and see the details in the tab of the screen in the program. Please let me know how to see the TAB details in the program.
Thanks,
Ramana

Hello Ramana,
You want to access to the subscreen. One way to do this is going to:
System->Status...
And there is the subscreen program "Program (Subscreen)" and under it, there is the Subscreen "Screen number".
Hope this helps (and I obtain some points)

Two idocs are created for one output message type

hi all,
we are communicating our sap idocs to external system using ALE.It is working smoothly.
Our problem raises here,
.idocs are creating at the time of output type attachment for purchase orders.But rarely,two idocs are creating for one message type.It means two idocs are created for same Purchase order.It makes complications for the external system.
anyone can help me pls?
thnks in advance..........

thanks jurgen for ur reply,
jurgen, the second idoc is not an "ORDCHG",It is the replica of first idoc.This one has also "ORDERS" message type.The only difference between these idocs are the time.It means the difference between the time field segments of these idocs have only three(3)seconds difference.We think that its from the system error.If it is not from the system error pls give me the explanation.
thanks in advance.......

Function Builder - Message no. DS027 Program names ZX... are reserved for i

Similar Messages

Maybe you are looking for