Program names L... are reserved for function group includes

Hi All
Im involved in a migration project from GTS  to ECC server where i have problem while creating a function group, when am creating a same include LZFR1T00 in ECC server am getting an error *'Program names L... are reserved for function group includes' Please help.
Thanks & Regards,
D. Sandeep.

I'm not sure what GTS is, but I guess you'll need to go to SE80 and create a function group (Z...). SAP will automatically generate the include with the L... name.

Similar Messages

  • Getting msg 'Program names L... are reserved for function group includes'

    Hi all,
    When I try to create a SAP standard Include which start with L, I get the message which says <b>''Program names L... are reserved for function group includes".</b>
    I have already created two standard SAP FMs.
    Please let me know how should I go ahead and create the Include.
    Thanks and regards,
    Anishur

    Hi,
    When you create the Function group, then if you look at the Fucntion group in SE80, then tehre inlcudes will be created, for FORMS if it will create the includes, and for TOP it will create the include, for L also it will create the Incldue(L referefs coding of subroutines).
    So, goto SE80 and activate the Include directly, then you can write the code in that include
    Regards
    Sudheer

  • Program name zxvau02 are reserved for includes of exit function group

    i am facing a problem during user exit.
    when i am trying to change the code in function module (va01) in include zxvvau02
    an error is occurred 'program name zxvau02 are reserved for includes of exit function group'
    so i could not edit the include program.

    Hi,
    1. Find the appropriate Enhancement.
    2. Enter the ABAP code in the "Z" program within the function module.
    3. Create a project.
    4. Add the Enhancement to the project.
    5. Activate the project.
    At the step (2), when I double click on the Include ZX* within source code of the function module to realize the exit, the
    system would prompt to create the include. But NO, it always prompt that the name of include is reserved by SAP and I
    cannot create it... I entered an access key for the object ...

  • Program names ZX... are reserved for includes of exit function groups means

    dear all,
    i am doing the enhacement  SRVESSR   for  EXIT_SAPLMLSR_010  in this exit  i got include, when i double click on the ZXMLUU19
    i am getting the  following error.
    Program names ZX... are reserved for includes of exit function groups
    regrds.
    shashi

    Hi,
    When the warning message is displayed press enter key, System will prompt the message "Include ZXMLUU19 does not exist. Create Object? ". Select Yes option. Include will be created.
    Regards
    Vinod

  • Function Builder - Message no. DS027 Program names ZX... are reserved for i

    I want to use " CALL CUSTOMER-FUNCTION '005'" within the function module IDOC_INPUT_STPPOD. But when I click on INCLUDE ZXTRKU13, I get the error message:
    "Program names ZX... are reserved for includes of exit function groups".
    What must be done in order for me to create and add my code to ZXTRKU13??
    Regards,

    No Problem Mate.
    We've very Handy tool with name as "Abuse report" it never needs to Enqueue/Dequeue before pressed.So You can use freely(Whenever needed) this for yourself also .

  • ZX... are reserved for includes of exit function groups

    Hello SAPians,
    For implementing  screen exit ,  I tried to modify the following include .
    It throws the warnig saying :
    Program names ZX... are reserved for includes of exit function groups
    Can u tell the way to make it editable
    I appreciate ur idea
    Thanks
    Santhosh

    It is just warning...
    Press Enter to move ahead of the warning.
    This comes when you try to implmenet the include of the user exit very first time.
    Regards,
    Naimesh Patel

  • How to create a new request for function group?

    Hi Friends,
    My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
    Thanks,
    Kaarthick.V

    Hi Karthick,
    If you want to Change the request for your FG means,
    1. Go to SE80 ->  work bench ->  Edit object.
    Here you have the option two change the request.
    or If you want to create the Function Group means,
    Go to SE80 -> Select Function Group -> Enter name -> press Enter
    Thanks,
    Reward If Helpful.

  • User has no RFC authorization for function group.

    Hi expert,
    I am calling a new function module  from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesn’t have proper authorization like SE37 Transactions Code and others.
    But there is some more existing function module in the same application that is working fine without having above issues with same access.
    I am passing the USERID as input in the function Module and execute simply.
    So can you please tell me the Way to handle it?
    I will really appreciate your answer.
    Thanks
    Ali

    Hi Rali,
    I think,there is problem with ur JCO connection..
    Please check the following steps -
    1. Go to transaction SM59.
    2. Choose Create.
    3. Enter the following:
    RFC destination: SAPSLDAPI
    Connection type: T (Start an external program via TCP/IP).
    4. Choose Enter.
    5. Choose Technical settings and specify the following data:
    a. Select Registered Server Program as the activation type.
    b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
    c. Enter the gateway host and the gateway service of R/3 server
    d. If the system is a Unicode system, navigate to Special Options and select the option
    Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
    server.
    6. Save your entries.
    Now
    1. Go transaction SLDAPICUST.
    2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
    Host name,  port Number, user  and password -  and set this SLD server as Primary.
    Only the entry marked as Primary is active.
    Please check whether there is entryof r/3 server in  the j2ee server /etc/services folder.If no entry is there then add -
    R/3server   port/TCP
    in the service file.
    Please check the  r/3server service folder and host folder  - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
    Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
    I hope this will help you ...
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Thanks,
    Gunja
    Edited by: Armin Reichert on Apr 26, 2008 6:35 PM

  • IDOC Scenario - User  has no RFC authorization for function group EDIN

    Hi all,
    I'm trying to configure an IDOC scenario from ECC to XI.
    RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
    Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
    Thanks for your help.
    regards.
    Roberti

    Hi,
    Check with PIRFCUSER user , that is having the right authorization or not ..
    And make sure that this user is present in the system & it should  not locked.
    to check that user is present or not-----goto su01 of the system & check
    Regards
    Seshagiri

  • V_T011 - You are changing a function group which does not belong to you

    I've read some posts about my problem I report here, but have not found the solution.
    In transaction SE54 -> V_T011 -> Generated Objetcs -> Create / Change I can not save the data transport details dialog for standard recording routine.
    The warning "You are changing the function group Which does not belong to you" is shown. The change is not saved.
    Can anyone help me?
    Thanks

    I would like to change the DIALOG DATA TRANSPORT DETAILS:
    Actually is configured with the option no,or user, recording routine. I want to save to Standard recording routine.
    Thanks,

  • User has no authorization for function group SWRS

    Dear SRM Gurus,
    We are facing an issue u201CUser has no authorization for function group SWRSu201D.
    Hope the user has no authorization to access function group SWRS and this function group is saying that workflow substitution.
    Can you any one have any idea what scenario are we using Workflow substitution?
    Is there any Roles need to be assigned?
    I would be appreciating if you could let us know more detail on this.
    Thanks.
    Regards,
    Magesh Basavaraj.

    Hi,
       The authorization object is 'S_WF_SUBST' for substitute role..try to assign this object and check..
    Saravanan

  • User has no authorization for Function group SYST

    Hi,
    We are starting to make customisation to B2B application. I have just created a new project for B2B_XXXX application and deployed it on the server. When I run this custom application, I am not able to login using the same user that is working fine for the standard B2B application.
    Following is the error I am getting
    ERROR 1 - RFC_ERROR_LOGON_FAILURE: User INTUSER05 has no RFC authorization for function group SYST
    ERROR 2-  The application was not able to switch to a stateful connection......
    Strange thing is that the same user works very well for standard B2B.
    Any clue? All I have done is created a CUSTCRMPRJ for B2B ERP (SHRWEB, SHRAPP). Please help.
    Best regards,
    -Tarun
    Edited by: Tarun Bakshi on Nov 10, 2011 7:37 PM

    Hi Shanto,
    The problem is still occuring. Even If I give s_rfc authorisation the order is not being created.
    I compared the source code for b2b and b2b_custom application, I have pasted below the component info
    sap.com      CORE-TOOLS      7.00 SP14 (1000.7.00.14.0.20071210170909)      SAP AG      SAP AG      20080125132852
    sap.com      SAP_JTECHF      7.00 SP14 (1000.7.00.14.0.20071210172424)      SAP AG      SAP AG      20080125132853
    sap.com      BASETABLES      7.00 SP14 (1000.7.00.14.0.20071210170411)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEECOR      7.00 SP14 (1000.7.00.14.0.20071210172300)      SAP AG      SAP AG      20080125132852
    sap.com      JLOGVIEW      7.00 SP14 (1000.7.00.14.0.20071210160700)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEE      7.00 SP14 (1000.7.00.14.0.20071210172039)      SAP AG      SAP AG      20080125132853
    sap.com      SAP_JTECHS      7.00 SP14 (1000.7.00.14.0.20071210172719)      SAP AG      SAP AG      20080125133813
    sap.com      BI_UDI      7.00 SP14 (1000.7.00.14.0.20071210170522)      SAP AG      SAP AG      20080125133909
    sap.com      BI_MMR      7.00 SP14 (1000.7.00.14.0.20071210170459)      SAP AG      SAP AG      20080125133230
    sap.com      UMEADMIN      7.00 SP14 (1000.7.00.14.0.20071210164800)      SAP AG      MAIN_APL70VAL_C      20080125140341
    sap.com      LM-TOOLS      7.00 SP14 (1000.7.00.14.1.20080124101556)      SAP AG      MAIN_APL70P14_C      20080125134809
    sap.com      SAP-SHRWEB      6.0 SP0 (1000.6.0.0.2.20080129095806)      SAP AG      MAIN_CRM70PAT_C      20110608153828
    sap.com      SAP-SHRAPP      6.0 SP0 (1000.6.0.0.2.20080128172843)      SAP AG      MAIN_CRM70PAT_C      20110608154506
    b2b_custom application has been created by using code from the following SCs that were added to the track
    SAPSHRWEB10_7-20003522.SCA
    SAPSHRAPP10_7-20003520.SCA
    SAPCRMWEB10_7-20003518.SCA
    SAPCRMAPP10_7-20003516.SCA
    SAPCRMDIC10_0-20003519.SCA
    STRUTS01_0-10003646.SCA
    SAPIPCMSA10_0-20003515.SCA
    SAPCRMJAV10_7-20003517.SCA
    SAPSHRJAV10_7-20003521.SCA
    TEALEAF00_0-20001451.SCA
    SAPBUILDT14_0-10003479.SCA
    Any help would be great...

  • No RFC authorization for function group AGS_TAO_REQUEST_MGMT_FGR

    Hi,
    I'm trying to build a connection between SAP TAO  2.0 and SolMan. I recevied following error message: for one of my user:
    2010-12-21 16:28:24:577 : ERROR   : SAPTAO.exe : Thread04 (SelfCheckWorker) : SAP.TAO.Common.Rfc.RequestListener.TaoCommonReqListProxy : SearchSoftwareComponents(): an error occured: SAP.TAO.Common.Rfc.SapAgentAgentException: CallBackend(RfcRequest): a call to the backend system failed: SAPAGENT_RFC_CALL_DETAILS(RFC_SYS_EXCEPTION) ---> SAP.TAO.Common.Rfc.SapAgentAgentException: SAPAGENT_RFC_CALL_DETAILS(RFC_SYS_EXCEPTION) ---> System.Exception: User GCRIBB has no RFC authorization for function group AGS_TAO_REQUEST_MGMT_FGR
    Please help. Thanks in advance.
    Subodh

    Hello ,
    You have mentioned you have received one of your user? rest of the users is it working?
    Looks like i also received this error message when i did not instlal my ST-400 ..TAO Agent..i saw the  same error message in the log.
    Did you follow the this note to install SAP TAO - agent  properly (OSS note - 1368112) ?
    When you did self check are you getting any warning messages?
    1440074 - Check this note also for RFC authorizations
    Good luck.
    Ram

  • User PI_JCO_RFC has no RFC authorization for function group ERFC

    I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
    I have done all the configurations on XI and R/3 end.
    When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
    But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
    From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
    Please advise.
    Thanks
    Shiva

    Hi,
    Try to add the following authorization object to the role(s) of the RFC user:
    S_RFC
    Set the following authorizations:
    RFC_TYPE = FUGR (function group)
    RFC_NAME = <name of the function group containing the BAPI>
    ACTVT = 16 (execute)
    Regards
    Seshagiri

  • User CRYSTAL has no RFC authorization for function group BDL5

    I am getting this error. Can anybody help.
    T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
    T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
    T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTION

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek
    Edited by: Ludek Uher on Sep 29, 2008 8:38 PM

Maybe you are looking for