Function HypSetSheetOption of the lib HsAddin.dll is not working good

Hi all,
i have a problem with a macro excel that uses the library HsAddin.dll.
First of all, the macro excel runs on Microsoft Office 2003; the version of smart view installed is 9.3.1.1.2.004 and the server has Microsoft Windows Server 2003, with Service Pack 2.
In my macro i have put a variable like this: varOpzione = HypSetSheetOption(R_NOME_FOGLIO, 16, 1). The macro takes a list of excel worksheets, refreshes those and then overwrite the refreshed sheets. With that variable initialized in that way, POV's members are displayed with member names and aliases. This is a problem for the users that work on the refreshed sheets, because, after the refresh they are not able to work on the sheets and refresh those again manually.
I have read this page: http://www.tcclab.com/Fresh%20Upload/Hyperion/SmartView/Docs/help/frameset.htm?/Fresh%20Upload/Hyperion/SmartView/Docs/help/hsv_help-13-50.htm#546380
in which is written that in order to display only member names i have to set parameter 0 instead of 1. I have done it, but in this way, macro does not retrieve any sheet. The error i got for every sheet is 'error during the retrieve'. I can't understand why this is happening.
Is there someone that could help me solving this issue?
Thank you in advance for your help.
Anna

The JDeveloper probably has a differnet vesion of the XDK - we have to be careful of the uptake of new versions to make sure we don't have any regressions.
<?xslt:maximum?> in the RTF becomes
<xsl:value-of select="xdoxslt:minimum(.//Measures.Dollars)" xdofo:field-name="xdoxslt:minimum(Measures.Dollars)" />
with:
<xsl:stylesheet version="2.0" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.xdo.template.rtf.XSLTFunctions">
Of course that works ONLY in xml publisher. I also would strongly recommend that you try the RTF templates.
Klaus
Edited by: KlausFabian on Mar 17, 2010 1:08 PM - correct typo

Similar Messages

Hi the wifi when make update not works good

hi
the wifi when make update not working good
now i cannot turn on wifi the wifi button
can you help me please ????

Hello Riham123,
Thank you for using Apple Support Communities.
It sounds like the wifi button is grayed out and you are unable to toggle it.
I recommend trying the steps in this article:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
All the best,
Sterling

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+ tab number does not work, is that intended functionality?

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+<tab number> does not work, is that intended functionality?

This can happen when the video player (Flash plugin) has the focus.
In that case the plugin consumes all the key presses.
You will have to click with the mouse elsewhere on the page or in the user interface to make keyboard shortcuts work.

Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation.

I am getting Adobe Reader XI (11.0.07) Error 2753. The File 'acrosup64.dll' is not marked for installation when deploying from msi package. .
Need help to resolve the issue

Hi dingusmagii
Can you please share the following info:
-> Which OS and architecture are you on
-> What are the exact steps being followed for installation.
-> Do you have any previous version of Reader already installed on your machine.
Also it would be helpful if you can you share Windows Installer log. Please follow the steps below to create installer log
1. Launch Notepad
2. Copy paste the following text in notepad
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Installer\]
"Logging"="voicewarmupx"
3. Now press Ctrl+S to save the file.
4. In the "Filename" field type <any_file_name>.reg for e.g. abc.reg
4. In the "Save as type" dropdown, select "All Files"
5. Click Save button to save the file at desired location
6. Go to the location where you saved the file and double click on it.
7. Follow the prompts to create the registry key.
After the registry key is added successfully, please re run the 11.0.07 patch installer. Once you get the error message click ok and then click on finish to close the installer dialog.
Now go to C:\Users\{username}\AppData\Local\Temp and look for file with name similar to MSIxxxxx.log.
Please upload the dump (compress the dump using WinZip or likewise) and share the link here.
For help see link How to share a document
regards,
Rohit

Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...

Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...

drag the other clip 'over' the main clip
the 2nd clip has to be selected/yellow border...
then you're prompted in the Inspector with the several options...

How do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update

how do you fix Error 2753. The File 'acrosup64.dll is not marked for installation. when trying to update?

i have trid from the adobe website and from the auto update notice, however
none have been successful. i am running windows 8.1 and i have another pc
running the same 8.1 and that one has successfully updated.
Philip P Copley
P.O.Box 3155
Norwood 5067
South Australia
[email protected]
(08) 8431 6885
0401 686 087

HT6001 the version 11.1.4 of iTunes not working good because it's not recognizing my iPhone and I can't do anything.

the version 11.1.4 of iTunes not working good because it's not recognizing my iPhone and I can't do anything.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

Dll soes not work after restart teststand

Hi NI Team,
I have an issue whereby i am using a 3rd part dll to program a device. At 1st it is able to program correctly using the designated dll. But after i've restart the teststand, it still able to point to the dll, but seems like the dll is not working as it should be. In order to make it work again, I need to change the dll path to another location in order to make it work.
I've attached the following
Sequence.jpg
- Shows the module configuration
return_result.jpg
- Shows the return result of a weird return as the suppose return result suppose to be "1" or "0"
Please do advice. Thanks
Attachments:
Sequence.JPG ‏190 KB
return_result.JPG ‏21 KB

Hi There - Thanks for the reply,
The problem i am facing is the dll that i am using does not work as it should after restart teststand, unless i change the path or point the dll to another new path. The error that i am getting is, the return result shows that it can't open the file path that that has been defined in the dll call path name parameter. The weird thing is, the dll able to work (able to point to the right image again ) after i point the dll to another path, meaning if i create a new folder then dump in the same dll inside the folder and point the dll to new folder it able to work. But i will see the same problem again after i restart teststand. In terms of unloading the dll, i have tried the run options to unload module either after step end or sequence end. But the problem still exists.....

HT1212 Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold hom

Brought iPod 4 for Daughter, she put on Passcode and she can't remember it, the ipod is saying "ipod is disabled" connect to itunes. Connented to iTunes come up with need to put passcode. The on/off button does not work, can't turn off and hold home button to reset please help.

Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
For MAC or PC
The Firmware Umbrella - TinyUmbrella
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Function HypSetSheetOption of the lib HsAddin.dll is not working good

Similar Messages

Maybe you are looking for