Hi the wifi when make update not works good

hi
the wifi when make update not working good
now i cannot turn on wifi the wifi button
can you help me please ????

Hello Riham123,
Thank you for using Apple Support Communities.
It sounds like the wifi button is grayed out and you are unable to toggle it.
I recommend trying the steps in this article:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Verify that airplane mode is off by tapping Settings > Airplane Mode.
Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
If your issue is still unresolved, perform a software restore in iTunes.
All the best,
Sterling

Similar Messages

I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP

I updated my iPhone 4S to the new IOS 6 I like it but the problem I found the Wifi button it's not working any more it looks hidden , so what I should do to solve this issue ASAP

Tap Settings App > General > Reset > Reset Network Settings. See if fixed. If not, Restore Firmware with iTunes on computer. See if fixed. If not, all iPhone 4S have Warranty, make Genius reservation and take iPhone to Apple for resolution.

Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!

Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!

If you are sure that your password is correct try restarting your router by removing power to it for 30 seconds and restarting. On your iPod go to Settings > General > Reset > Reset network settings. Now try to connect.

Broke out of the box and itune update not working

Just got apple tv delivered today but it wasn't working out of the box... flashing white light..
So i connected it to itunes via micro usb and itunes won't restore it looks like the .dmg is missing..
This is really bad, surely apple have noticed the software update is missing???
Did this update work for anyone?

It's impossible to know how much work there is putting it back, it sounds simple but it might not be, it's been down a few days now, I suppose it depends on how much inconvenience it is to return it for another.

Function HypSetSheetOption of the lib HsAddin.dll is not working good

Hi all,
i have a problem with a macro excel that uses the library HsAddin.dll.
First of all, the macro excel runs on Microsoft Office 2003; the version of smart view installed is 9.3.1.1.2.004 and the server has Microsoft Windows Server 2003, with Service Pack 2.
In my macro i have put a variable like this: varOpzione = HypSetSheetOption(R_NOME_FOGLIO, 16, 1). The macro takes a list of excel worksheets, refreshes those and then overwrite the refreshed sheets. With that variable initialized in that way, POV's members are displayed with member names and aliases. This is a problem for the users that work on the refreshed sheets, because, after the refresh they are not able to work on the sheets and refresh those again manually.
I have read this page: http://www.tcclab.com/Fresh%20Upload/Hyperion/SmartView/Docs/help/frameset.htm?/Fresh%20Upload/Hyperion/SmartView/Docs/help/hsv_help-13-50.htm#546380
in which is written that in order to display only member names i have to set parameter 0 instead of 1. I have done it, but in this way, macro does not retrieve any sheet. The error i got for every sheet is 'error during the retrieve'. I can't understand why this is happening.
Is there someone that could help me solving this issue?
Thank you in advance for your help.
Anna

The JDeveloper probably has a differnet vesion of the XDK - we have to be careful of the uptake of new versions to make sure we don't have any regressions.
<?xslt:maximum?> in the RTF becomes
<xsl:value-of select="xdoxslt:minimum(.//Measures.Dollars)" xdofo:field-name="xdoxslt:minimum(Measures.Dollars)" />
with:
<xsl:stylesheet version="2.0" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.xdo.template.rtf.XSLTFunctions">
Of course that works ONLY in xml publisher. I also would strongly recommend that you try the RTF templates.
Klaus
Edited by: KlausFabian on Mar 17, 2010 1:08 PM - correct typo

Same issue Network Discovery not working and Windows Update not working

I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank You

Hi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

IPhone 5 have my wifi works with the FRITZ! 7330 SL not as good when I do speed test I get to 0.41 Mbit / s With another Fritz Box Fon WLAN I get well over 12.31 Mbit / s on what to do.

I have tried VERY unsuccessfully to install iphoto 9.2.3 update...it says it has successfully updated - then on opening says: iPhoto cannot be opened because of a problem. Check with the developer to make sure iPhoto works with this version of Mac OS X.

I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update.
I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops up and says:
iPhoto cannot be opened because of a problem.
Check with the developer to make sure iPhoto works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.
Click Report to see more detailed information and send a report to Apple.
Insane...I have all my updates including Lion 10.7.3 why does APPLE KEEP SENDING BETAS AS A REAL PRODUCT?
Does anyone know how to copy over a backup from a twinned drive Backup? What files etc.
Thanks tons...

Thanks Terence,
I did get it working finally...and your last advice was what I needed.
I am embarassed that I was an early adopter...SHOULD HAVE KNOWN BETTER and read the problems before creating some for myself.
This was an excercise in frustration, because of the obtuse division between the appstore and Apple Support downloads... it was a bit of a circuitous route...strange that with all the security reciepts and tracking that Apple goes to to prevent piracy... which Steve by his own admission used to build Apple...
Why aren't the server scripts smart enough to say…”HEY DUMMY you can't use this download because you purchased the last iPhoto upgrade from the appstore...and… DON'T WASTE YOUR TIME and precious data BUDGET downloading this gargantuan file which will eat 20% of your expensive 5Gb monthly data allotment!!!…and NOT WORK…only pretend to…and then foul your system….kill your productivity and turn your hair whiter…even worse than LION did.
I am just so antagonized by the inept scripts in recent installations that don't do a diagnostic before allowing installation that is going to corrupt things...I had less effort and frustration when I ran my ATARI with a MAC emulator...rarely lost any productivity to nonsense.
I AM TIRED OF BETAs dressed as products...designed and rushed out for Apple toys that once were tools of the creative trade...COREL...may still have a chance at a comeback if Apple keeps pumping out toys instead of the venerable tools we once adored as income enhancers.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

My iPod dispalys this message: "Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!

Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application." Using OS X 10.6.8

When trying to open Pages 4.0.1 I get a message stating "Pages cannot be opened because of a problem, check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X."
I've run the software update several times. Pages is located in my iWork '09 folder in Applications. Using OS X 10.6.8

Delete and reinstall it.
(104030)

Playbook requires me to pay for support when it did not work from the beginning and they could not fix.

lack of email app- makes this may purchase virtually useless. because
cant bridge with my bb 9700. maybe twice after deleting from both, and rebridging, i got connections. i cant spend an hour bridging every time. since may this is unfixable. the support people cant fix it after dozens of hours. got lots.of emails from them though. asking if i was resolved. when i answered no, they asked me to do it all again. they have no fix for this.
can type documents, but cant email them to anybody. same with excel. no way to attach documents when the bridge doesnt work.
i am a ceo,and i am moving my entire organization off bb becuase of this.
have spent many many hours from the beginning in may, and now they want me to pay a 129 dollar fee to get support when it has not worked right from the beginning.
i bought an ipad today and i am absolutely blown away by how much better it is in every single way. dozens of bbs are going away now.
slow, no.email, locks up all the time, stand by button restarts tablet, no bridging without total reload on both devices. why would i go through this anymore? it is costing my business a fortune with myself and my people trying to make the playbook work.
we will get ipads and make more money.
i have tried to stay loyal to bb, but after being told i have to pay for support
when i did once get a connection through bridge, reply locked up everytime on an email. could not type.

I would like to add my support to this comment.
Strike 1) Bridging a BB 9700 with a PB is flaky at best. Even if you run the very latest software on both, it does not work properly. This is NOT a user issue but a programme/application issue. RIM software running on RIM hardware and O/S and NOT being able to connect properly = RIM fault.(see my other post: My Bridge connects, it exchanges data like passwords, number of unread emails and my playbook notifies me when someone calls my BB, but it does NOT unlock)
Strike 2) All this used to work fine during the 90d grace suport period (apart from the flaky bluetooth issue that required a hard reboot of the BB whenever the connection was broken in a bad way)
Strike 3) Now, after a PB OS upgrade (which I faithfully applied), several phone upgrades (due to another problem) and the latest Bridge application install, it all doesn't work anymore, 100 days after I bought the flipping thing. so I have a fancy ebook reader, not the productivity enhancing tool I can use on the go.
So now I am stuck with a forum that can't help, a technical database that does not contain this support information and a broken RIM application on RIM Hardware and O/S that I paid a lot of money for. And now they want more to look at this incident????? I am sorry but if this was a problem caused by usage, configuration or any other user error, I could understand it. But this is all completely in RIMs ballpark. I have done everything right. It connects. It just DOES NOT WORK!!!!!
As I said in my other post, an evaluation of the PB in my company is ongoing as a possible management tool by people I know quite well, as I work in the area, but my advice would definitely be to stay away until basic functionality like emails, attachments, calendars etcetera are all suitably solved and usable by the average manager with sausage fingers and no clue about bluetooth, hard reboots and who won't be able to hold down the power, + & - buttons at the same time as the fingers won't fit!!
So RIM, get your finger out, open up an email support channel or get some qualified support people go through this forum and help those people who have shown faith in your products and who now have real problems with your software and hardware. DONT HIDE BEHIND A STUPID SUPPORT FEE - MAN UP TO YOUR PROBLEMS!!!

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+ tab number does not work, is that intended functionality?

When I am on a Youtube video that is running and I want to switch to another tab, the Ctrl+<tab number> does not work, is that intended functionality?

This can happen when the video player (Flash plugin) has the focus.
In that case the plugin consumes all the key presses.
You will have to click with the mouse elsewhere on the page or in the user interface to make keyboard shortcuts work.

Hi the wifi when make update not works good

Similar Messages

Maybe you are looking for