Function module for logical database

hi
which function module will return the logical database for a given application component from the SAP hierarchy.
Example:
Input- application component- LO
output- MSM, etc.,
Thank you.

RS_COMPONENT_VIEW
TADIR and LDBT
LDB_INFO

Similar Messages

  • Function module for logical file path and name

    Hello all,
    I am wondering is there any function module available to translate a logical file path to a physical file path and a logical file name to a physical file name? Thanks a lot!
    Regards,
    Anyi

    Please check the FM FILE_NAME_GET.
          CALL FUNCTION <b>'FILE_GET_NAME'</b>
             EXPORTING
               logical_filename = 'ZDELCHKREP'
               parameter_1 = it_cntry-cntry
             IMPORTING
               file_name        = l_file
             EXCEPTIONS
               file_not_found   = 08.
        CALL FUNCTION <b>'FILE_GET_NAME_USING_PATH'</b>       EXPORTING
             logical_path = 'ZDELCHKREP'
             file_name = l_file
           IMPORTING
             file_name_with_path = l_file.
    Message was edited by: Anurag Bankley
    Message was edited by: Anurag Bankley

  • How to find the function module for standard tables.

    Hi
    Could any one please tell me how to find the standard function module to update the standard tables
    Thanks & Regards
    Sowmya

    Hi sowmya,
    To find the function modules for standard tables you go for a where used list of that particular table and check only function module interfaces checkbox...
    and more over you can go for DB_UPDATE_TABLE will be the function module for updating database table..
    Hope this information would help you
    Regards
    Narin Nandivada

  • Rfc enabled function module for the updating the database table

    Hi,
            I need one rfc enabled function module for the updating the database table from the legacy system.currently i am using the rfc_read_table to read the database table.similarly i need for the update.

    Hi
    I believe you need to create one by yourself
    Max

  • Post some good examples for logical database

    Hi all,
    Can any one post some good examples for logical database.
    Regards,
    Lisa

    Hi lisa
    Example of a Logical Database
    Let us consider the logical database TEST_LDB.
    Selections in the Selection Include
       SELECT-OPTIONS: SLIFNR   FOR LFA1-LIFNR,
                       SBUKRS   FOR LFB1-BUKRS,
                       SGJAHR   FOR LFC1-GJAHR,
                       SBELNR   FOR BKPF-BELNR.
    Database Program
    DATABASE PROGRAM OF THE LOGICAL DATABASE TEST_LDB
    PROGRAM SAPDBTEST_LDB DEFINING DATABASE TEST_LDB.
    TABLES: LFA1,
            LFB1,
            LFC1,
            BKPF.
    Initialize selection screen (process before PBO)
    FORM INIT.
    ENDFORM.                                "INIT
    PBO of selection screen (always before selection
    screen
    FORM PBO.
    ENDFORM.                                "PBO
    PAI of selection screen (process always after ENTER)
    FORM PAI USING FNAME MARK.
      CASE FNAME.
        WHEN 'SLIFNR'.
        WHEN 'SBUKRS'.
        WHEN 'SGJAHR'.
        WHEN 'SBELNR'.
      ENDCASE.
    ENDFORM.                                "PAI
    Call event GET LFA1
    FORM PUT_LFA1.
      SELECT * FROM LFA1
    WHERE LIFNR IN SLIFNR.
        PUT LFA1.
      ENDSELECT.
    ENDFORM.                                "PUT_LFA1
    Call event GET LFB1
    FORM PUT_LFB1.
      SELECT * FROM LFB1
    WHERE LIFNR = LFA1-LIFNR
    AND BUKRS IN SBULRS.
        PUT LFB1.
      ENDSELECT.
    ENDFORM.                                "PUT_LFB1
    Call event GET LFC1
    FORM PUT_LFC1.
      SELECT * FROM LFC1
    WHERE LIFNR = LFA1-LIFNR
    AND BUKRS = LFB1-BUKRS
    AND GJAHR IN SGJAHR.
        PUT LFC1.
      ENDSELECT.
    ENDFORM.                                "PUT_LFC1
    Call event GET BKPF
    FORM PUT_BKPF.
      SELECT * FROM BKPF
    WHERE BUKRS = LFB1-BUKRS
    AND BELNR IN SBELNR
    AND GJAHR IN SGJAHR.
        PUT BKPF.
    ENDSELECT.
    ENDFORM.                                "PUT_BKPF 
    The PROGRAM statement has the addition DEFINING DATABASE TEST_LDB. This defines the database program as belonging to the logical database TEST_LDB.
    The nodes of the structure are declared with the TABLES statement which generates the appropriate table work areas. You can also use the NODES statement to define database tables as nodes. If a node of a logical database is not a database table, you must use the NODES statement. The interface work areas are shared by the database program and the user, and so act as an interface for passing data. The term "user" here can mean either an executable program to which the logical database is linked, or the function module LDB_PROCESS.
    The subroutines INIT and PBO initialize the selection screen.
    In the PAI subroutine, you can include an authorization check for the user input on the selection screen. Plausibility or value range checks are also possible. If a check fails, you can write an error dialog. The corresponding field on the selection screen is then made ready for input again.
    The PUT_<node> subroutines read the database tables according to the selection criteria entered by the user and trigger the relevant events in the executable program. This program is intended only to show the essential structure of a logical database. It does not contain any refinements to improve response times. The order in which the subroutines are called is determined by the structure of the logical database.
    regards,
    vijay

  • Function Modules for uploading the file

    Hi experts ,
                      I have a requirement to download a file (csv) from my local sytem (say desktop) into an internal table first and then update the contents of the same internal table into the database table.
    Can anybody provide me with a sample program for doing the same or at least the name of function modules for the same.
    Prompt replies will be rewarded.
    TIA
    Abhishek

    Hi Abhishek,
    How to use INSERT Statement..
    Check this Sample Program..
    TABLES:MARA.
    DATA:ITAB LIKE MARA OCCURS 0 WITH HEADER LINE.
    START-OF-SELECTION.
    ITAB-MATNR = '123ABCDA'. .
    ITAB-MBRSH = 'C'.
    ITAB-MTART = 'FERT' .
    ITAB-MEINS = 'KG' .
    APPEND ITAB.
    ITAB-MATNR = '123ABCDB'. .
    ITAB-MBRSH = 'C'.
    ITAB-MTART = 'FERT' .
    ITAB-MEINS = 'KG' .
    APPEND ITAB.
    LOOP AT ITAB.
    INSERT MARA FROM ITAB.
    MODIFY MARA .
    ENDLOOP.

  • Function Module for search help Exit

    How to create a function Module for search help exits?
    please explain in details with step by step process.

    Hi,
    How to create a function Module for search help exits?
    function module for search help F4IF_SHLP_EXIT_EXAMPLE
    dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
    please check out the link below it will help you
    A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
    http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
    please explain in details with step by step process.
    create a search help exit:
    1. create an fm with this interface:
    *" TABLES
    *" SHLP_TAB TYPE SHLP_DESCR_TAB_T
    *" RECORD_TAB STRUCTURE SEAHLPRES
    *" CHANGING
    *" VALUE(SHLP) TYPE SHLP_DESCR_T
    *" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
    put this logic in it:
    Delete duplicate filter logic.
    This logic only needs to apply at the 'DISP' event - which is just
    before the hit list is displayed
    if callcontrol-step = 'DISP'.
    delete adjacent duplicates from record_tab.
    endif.
    2. edit your search help in se11 and enter the name of the above search help exit fm
    check this sample code..for dynamic search help
    REPORT  ZTEST_F4HELP                              .
    *---Report with selection screen and to display the list of
    possible entries for field 'B' as per the value in field 'A'.
    parameters: p_vbeln type vbak-vbeln,
                p_posnr type vbap-posnr.
    at selection-screen on value-request for p_posnr.
      data: begin of help_item occurs 0,
              posnr type vbap-posnr,
              matnr type vbap-matnr,
              arktx type vbap-arktx,
            end of help_item.
      data: dynfields type table of dynpread with header line.
      dynfields-fieldname = 'P_VBELN'.
      append dynfields.
      call function 'DYNP_VALUES_READ'
           exporting
                dyname               = sy-cprog
                dynumb               = sy-dynnr
                translate_to_upper   = 'X'
           tables
                dynpfields           = dynfields
           exceptions
                invalid_abapworkarea = 1
                invalid_dynprofield  = 2
                invalid_dynproname   = 3
                invalid_dynpronummer = 4
                invalid_request      = 5
                no_fielddescription  = 6
                invalid_parameter    = 7
                undefind_error       = 8
                double_conversion    = 9
                stepl_not_found      = 10
                others               = 11.
      read table dynfields with key fieldname = 'P_VBELN'.
      p_vbeln = dynfields-fieldvalue.
      call function 'CONVERSION_EXIT_ALPHA_INPUT'
           exporting
                input  = p_vbeln
           importing
                output = p_vbeln.
      select posnr matnr arktx into table help_item
                     from vbap
                          where vbeln = p_vbeln.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
           exporting
                retfield    = 'POSNR'
                dynprofield = 'P_POSNR'
                dynpprog    = sy-cprog
                dynpnr      = sy-dynnr
                value_org   = 'S'
           tables
                value_tab   = help_item.
    also check this link it will help you
    /message/3854825#3854825 [original link is broken]
    *********please reward points if the information is helpful to you*************

  • Function module for reteriving Purchase order values

    hi,
    I there any function module for reteriving the Purchase order Values

    better to put ur logic /requirement on table EKKOEKPOEKBE.
    Regards
    Prabhu

  • Function Modul for Order Number from VA02

    Hallo
    i have a delivery number and want read the order number from VA02.
    Of course, select the database from LIKP --> LIPS --> VBKD is possible but 
    maybe it has function modul for read the order number from transaction VA02.
    THX ANU

    Hi,
    I think is better recover the data directly from DB tables (in table LIPS you have the fields VGBEL, VGPOS, VGTYP ) if you only want the order number.
    With the delivery number you only need to acces 1 table. If you use a FM, you will recover this data and a few fields that is not interesting for you. The access to table LIPS is using table index (delivery number)
    Regards,
    Pepe

  • Any function module for  validation

    Hi,
    I am new to ABAP.
    Can any body tell me whether there is any built in function module for
    field validation.
    Thanks in advance
    Archana

    Hi,
    u can validate the field values using at selectiion-screen
    •     AT SELECTION-SCREEN
    When user enters the values in the fields of selection screen and clicks on execute button, this event gets triggered. This event is basically for checking the values entered by the user for the fields of the selection screen i.e., data validity checking. This event is for entire selection screen.  For example:
    You are accepting carrid, connid, fldate from user and you don’t want to proceed if user enters no value for carrid and fldate.  Using AT SELECTION-SCREEN can do this.
    Select-options: carrid1 for sflight-carrid,
              Connid1 for sflight-connid,
              F1date1 for sflight-f1date.
    AT SELECTION-SCREEN.
    If carrid1-low ne ‘  ’ and fldate1-low = ‘  ’.
        Error message.
    Endif.
    In this case, if both the fields are entered blank, then the user gets error message.
    Basically, this event is for many fields on selection screen.  Usually, it is for the fields which are logically related.
    •     AT SELECTION-SCREEN ON  <field>
    When you want to check for specific value of a field. For example, carrid should be in the range of ‘LH’ and ‘SQ’. This can be done in this event.  Basically, this event is for checking individual fields. You can have many AT selection-screen events in your program (i.e., for each field specified in the Select-Options).
    Select-Options carrid1 for sflight-carrid.
    AT SELECTION-SCREEN.
    If carrid1-low ne ‘LH’ and carrid1-high ne ‘SQ’.
       Error message.
    Endif.
    Here the system will not proceed on entering wrong values.
    Regards,
    Sruthi

  • Inbound function module for IDoc type INFRECMASS01

    Hello everybody,
    What is the inbound function module for IDoc type INFRECMASS01?
    I tried IDOC_INPUT_INFREC (as for IDoc INFREC01), but I got the following message (B1 044): Incorrect function module IDOC_INPUT_INFREC called up
    Thanks in advance
    Roland

    The only difference between INFRECMASS01 and INFREC01 is that repitition of the same segments. However, the standard function module is hardcoded with IDOC type INFREC01, so if you want to use the MASS IDOC copy the standard one and put in the logic to loop around and process the info records one by one.
    There is no standard funtion that can process mass idoc of the info record.
    Regards,
    Ravi
    Note:  Please mark the helpful answers

  • Function module for CF23

    Hi Guys,
    Can anyone give me the function module for CF23
    Thanks and regards
    Thamizhchelvan G

    Dear Thamizhchelvan,
    Check with this,
    CF_UT_USAGE_FHM_ORDER_TEST     Test whether PRT master is used in an order
    CF_VB_AFFH_FROM_BT_FILL        PRT allocation order: Fill database structure frm.Doc.Table structure
    CF_VB_AFFH_POST                PRT: Update PRT data order
    COFD                           Order: PRTs detail screens
    CO_FD_FHM_DETAIL_CALL          Detail screens PRT management in orders
    COFU                           Order: PRT overview
    CO_FU_FHM_DETAIL_EDIT          Call PRT detail screen of the order
    CO_FU_FHM_LST_EDIT             Maintain PRT overview in orders
    CO_FU_ORD_AVAILABILITY_CHECK   Availability check PRT in the order
    Regards
    Mangalraj.S

  • Functional module for automatic creation of pur requisition & pur order

    hello,
    what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
    please let me know as early as possible
    regards,
    rajesh kumar raju

    Hi,
             Please check with following.
    IDOC_INPUT_ACC_PURCHASE_REQUI
    IDOC_INPUT_ACC_PURCHASE_ORDER
    /ISDFPS/OR_PURCHASE_ORDER_CR
    BS01_PURCHASE_DOCUMENT_CREATE
    CO_MP_CREATE_PURCHASE_ORDER
    Thanks & Regards
    Sadhu Kishore

  • How to define our own selection screen for logical database  in abap-hr?

    Hi Friends,
    Can u please help me
    How to define your own selection screens for  logical database.
    we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using  customer table like t599c, t599f and how to add to my logical database?
    Thanks in advance
    charan

    check out this online help
    http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
    Regards
    Raja

  • Transporting Views created for Logical Database in QAS

    Hello all,
    Can anybody let me know teh steps...
    How to transport views created for logical database from dev to QAS...
    kindly give the steps...
    thanks
    saurabh

    I don't think PNPCE does anything with HRP infotypes.  PNPCE is all about PA data since PERNR is the main key.  Logical DB PCH is the one that deals with HRP Infotypes.

Maybe you are looking for