Function module to extract sales org data for sales transaction

Hi! I would like to find out the sales org assigned to a particular sales transaction. When I run function module CRM_ORDER_READ, it passes some information into LT_ORGMAN but I get 2 entries rather than the 2 entry I see in my sales transaction. Is this the right table to look for sales org data for a particular transaction?
Appreciate any help on that.
Cheers!
SF

Please check with following function module:
CRM_MAP_ORGMAN_DATA
CRM_ORGMAN_GET_DB
CRM_ORGMAN_READ_DB
CRM_ORGMAN_READ_OW
hope it will useful.

Similar Messages

  • Function Module/Document to change Reversal date for FI  document.

    Can anyone please provide me with the Function Module/Document to change Reversal date for FI  document.

    Hi Vikram,
    Normally, you post a reversing document in the same period you posted the original document.  The period of the original document must be open to post a reversing document. If the period is not open, you can overwrite the posting date field with a date in an open period, such as the current period.
    Regards,
    Manoj.

  • Function module which uses both BAPI's for sales order create and change

    Please name the function module which uses both BAPI's for sales order create and change.
    BAPI_SALESORDER_CREATEFORMDAT2
    BAPI_SALESORDERCHANGE

    Yup.
    you must write a piece of code for this.
    with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
    logic somethig like this.
    Amit.

  • Function Module to create AFS Outbound delivery for sales order

    Guys,
    I am looking for a function module to create deliveries for a sales order IN IS-AFS.
    I cannot make BAPI_DELIVERYPROCESSING_EXEC work. Also, if I use the IDOC type /AFS/DELVRY03 via message type WHSCON and function module IDOC_INPUT_DELVRY it doesn' work either.
    Does anyone know which function module I could use? I need to select specific AFS schedule lines though, but at this point I am not able to make any work.
    Thanks
    Leonardo

    This will not help .
    Edited by: Amit Khare on Aug 7, 2008 3:49 AM

  • XD99 Create sales Org data

    HI,
    I have a reuqest to create additonal Sale Org data for the existing customer.
    I want to extend this to another sales org data. Can XD99 help in that.
    Thanks & Pls advice.

    Hi Prasad,
    Yes, it is possible. Chose the table KNVV for uploading the Sales Related data.
    regards,
    ravi

  • Creating BW Function module to extract R3 Function module data.

    Could you tell me how to create a BW Function Module to Extract data from  R/3 Function module?.
    Also, the BW function module needs to pass a date/time filter to R/3 function module basis which the R/3 function module passes the date/time restricted data to BW function module.
    Thanks,
    Gautam

    You will have to create a function module in R/3 and then call the same in BW using the RFC call function option.
    Please do not raise separate threads for each question - you have asked the same question in another post of yours..
    bw extraction using function module
    http://tinyurl.com/lwhtk8
    this will give you an idea on how you can achieve this.

  • Creation of Sales org views for customers related to vendor

    Hello All,
                 Can any body tell me is there any functional module which can be used to created the sales org views for customers related to vendors.
    Regards
    Srinivas

    Hi Ravi,
    the number of sales area possible would be 6 sales area,
    yes you can of course use the common master data functionality
    After creating the organizational structure and relevant master records you want to use as the masters, that is, in the distribution channels and divisions you are going to use as a reference, you can group distribution channels and divisions separately for master data (which combines customer master and material master records), group condition records, or both master data and condition records.
    Letu2019s say you have a product range that is not different for the four different distribution channels you have (the channels could be telesales, retail, industry, and wholesale.) Neither is there a difference in the customersu2019 details when they purchase through one or the other. Thus, you will not want to create a multiple of four views of customer master and material master records. Merely create the customer master records and material master records in one of the distribution channels, such as retail. Then assign the other distribution channels you created in the organizational structure setup to this one.
    Donu2019t forget this means you can only create or change master data in the distribution channel that is being referenced. In the scenario above, this means you can only change data for the retail distribution channel. Even if you should access a customer or material master in change mode, press F4 (possible entries), and select telesales, industry, or wholesale, you will receive a message u201CSales area is not defined . . . u201D
    The same is true for the sharing of conditions. If conditions are shared, you need only create a condition in the distribution channel or division you are using as the reference. Obviously, this only pertains to conditions that have the distribution channel and/or division in their key, such as a price based on sales area
    Revert if helpful
    Mohit Singh

  • Hi. i used Function module to change Characteristic values of a sales order

    hi. i used Function module to change Characteristic values of a sales order..
    but sales order's Characteristic values didn't change.
    And the Function module doesn't occur any log message.
    please tell me wrong code, and how to solve this problem.
    if i have wrong method, what data can i pass to change the characteristic values
    DATA: LT_E1CUVAL    TYPE TABLE OF E1CUVAL.
      DATA: WA_E1CUVAL    TYPE E1CUVAL.
      DATA: LS_CFG_HEAD   LIKE CUXT_CUCFG_S,
            LS_INSTANCES  LIKE CUXT_CUINS_S,
            LS_VALUES     LIKE CUXT_CUVAL_S,
            LS_E1CUCFG    LIKE E1CUCFG,
            LS_E1CUINS    LIKE E1CUINS,
            LS_E1CUVAL    LIKE E1CUVAL,
            LS_PROFILE    LIKE E1CUCOM,
            LS_VBAP       LIKE VBAP,
            L_CUOBJ       LIKE INOB-CUOBJ,
            L_ATINN       LIKE CABN-ATINN.
      DATA: LT_INSTANCES  LIKE CUXT_CUINS_S OCCURS 0,
            LT_PART_OF    LIKE CUXT_CUPRT_S OCCURS 0,
            LT_VALUES     LIKE CUXT_CUVAL_S OCCURS 0,
            LT_VAR_KEYS   LIKE CUXT_CUVK_S  OCCURS 0,
            LT_KSML       LIKE KSML         OCCURS 0 WITH HEADER LINE,
            BEGIN OF LT_CLINT OCCURS 0,
              CLINT  LIKE KSSK-CLINT,
            END OF LT_CLINT.
      DATA: LT_CUIB       LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
      DATA: E_ROOT_INSTANCE           TYPE     CUXT_INSTANCE_NO.
      DATA: EV_ROOT_PERSIST_ID     TYPE     IBEXTINST_DATA-EXT_INST_ID.
      DATA: EV_CFG_HAS_CHANGED     TYPE     XFELD.
      DATA: EV_HANDLE_APPL_LOG     TYPE     BALLOGHNDL.
      DATA: L_CUOBJ_NEW           TYPE CUOBJ.
      DATA: L_OWNER               TYPE IBXX_BUSINESS_OBJECT.
      REFRESH LT_E1CUVAL.
      CLEAR LS_VBAP.
      SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
                                FROM VBAP WHERE VBELN = I_VBELN
                                            AND POSNR = I_POSNR.
      IF SY-SUBRC <> 0.
        RAISE INSTANCE_NOT_FOUND.
      ENDIF.
      REFRESH LT_CUIB. CLEAR LT_CUIB.
      LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
      APPEND LT_CUIB.
      CALL FUNCTION 'CUCB_INITIALIZER'
        EXPORTING
          IT_INSTANCES = LT_CUIB[].
      CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
        EXPORTING
          I_ROOT_INSTANCE              = LS_VBAP-CUOBJ
        IMPORTING
          E_CFG_HEAD                   = LS_CFG_HEAD
          ES_PROFILE                   = LS_PROFILE
          ET_RETURN                    = ET_RETURN
        TABLES
          E_TAB_INSTANCES              = LT_INSTANCES
          E_TAB_PART_OF                = LT_PART_OF
          E_TAB_VALUES                 = LT_VALUES
          E_TAB_VAR_KEYS               = LT_VAR_KEYS
        EXCEPTIONS
          INVALID_INSTANCE             = 1
          NO_ROOT_INSTANCE             = 2
          INSTANCE_IS_A_CLASSIFICATION = 3
          INTERNAL_ERROR               = 4
          NO_PROFILE_FOUND             = 5
          INVALID_DATA                 = 6
          OTHERS                       = 7.
      IF SY-SUBRC <> 0.
        CASE SY-SUBRC.
          WHEN 1.
            RAISE INSTANCE_NOT_FOUND.
          WHEN 3.
            RAISE INSTANCE_IS_A_CLASSIFICATION.
          WHEN OTHERS.
            RAISE INVALID_DATA.
        ENDCASE.
      ELSE.
        LOOP AT LT_VALUES INTO LS_VALUES.
          IF    LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
             OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
            LS_VALUES-VALUE = '7100010'. "This is test data
            MODIFY LT_VALUES FROM LS_VALUES.
          ELSE.
            DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
          ENDIF.
          CLEAR LS_VALUES.
        ENDLOOP.
      ENDIF.
    &#50689;&#50629;&#51221;&#48372; &#53945;&#49457; &#48320;&#44221;
      CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
        EXPORTING
          I_CFG_HEADER                        = LS_CFG_HEAD
          I_ROOT_INSTANCE                     = LS_VBAP-CUOBJ
        I_PLANT                             =
        I_STRUCTURE_EXPLOSION_DATE          =
        I_STRUCTURE_EXPLOSION_APPL_ID       =
        I_LOGSYS                            =
          IS_PROFILE                          = LS_PROFILE
        IV_ONLY_SINGLE_LEVEL                =
        IV_HANDLE_APPL_LOG                  =
        IV_OBJECT_APPL_LOG                  = 'CIF'
        IV_SUBOBJECT_APPL_LOG               = 'T_CNFG'
        IMPORTING
          E_ROOT_INSTANCE                     = E_ROOT_INSTANCE
          EV_ROOT_PERSIST_ID                  = EV_ROOT_PERSIST_ID
          EV_CFG_HAS_CHANGED                  = EV_CFG_HAS_CHANGED
          EV_HANDLE_APPL_LOG                  = EV_HANDLE_APPL_LOG
          ET_RETURN                           = ET_RETURN
        TABLES
          I_TAB_INSTANCES                     = LT_INSTANCES
          I_TAB_PART_OF                       = LT_PART_OF
          I_TAB_VALUES                        = LT_VALUES
          I_TAB_VAR_KEYS                      = LT_VAR_KEYS
        I_TAB_BLOB                          =
        EXCEPTIONS
          NO_CONFIGURATION_DATA               = 1
          NO_ROOT_INSTANCE                    = 2
          INVALID_INSTANCE                    = 3
          INSTANCE_IS_A_CLASSIFICATION        = 4
          INTERNAL_ERROR                      = 5
          NO_PROFILE_FOUND                    = 6
          INVALID_DATA                        = 7
          OTHERS                              = 8
      IF SY-SUBRC <> 0.
        CASE SY-SUBRC.
          WHEN 1.
            RAISE NO_CONFIGURATION_DATA.
          WHEN 3.
            RAISE NO_ROOT_INSTANCE.
          WHEN 3.
            RAISE INVALID_INSTANCE .
          WHEN 3.
            RAISE INSTANCE_IS_A_CLASSIFICATION.
          WHEN 3.
            RAISE INTERNAL_ERROR.
          WHEN OTHERS.
            RAISE INVALID_DATA.
        ENDCASE.
      ENDIF.
      COMMIT WORK.
    save configuration with next commit
      CLEAR: LS_INSTANCES.
      READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
    L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
      L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
      L_OWNER-OBJECT_KEY  = LS_INSTANCES-OBJ_KEY.
      CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
        EXPORTING
          ROOT_INSTANCE         = LS_VBAP-CUOBJ
          ROOT_OBJECT           = L_OWNER
        IMPORTING
          NEW_INSTANCE          = L_CUOBJ_NEW
        EXCEPTIONS
          INVALID_INSTANCE      = 1
          INVALID_ROOT_INSTANCE = 2
          NO_CHANGES            = 3
          OTHERS                = 4.
      IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
        CLEAR LS_VBAP-CUOBJ.
        RAISE INTERNAL_ERROR.
      ELSEIF SY-SUBRC = 1.
        LS_VBAP-CUOBJ = L_CUOBJ_NEW.
      ENDIF.
    What's wrong?
    help me to solve this problem.
    Thanks a lot.

    <b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
    <b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
    <b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
    <b>SD_PARTNER_READ</b> all the partners information and addresses
    <b>SD_DETERMINE_CONTRACT_TYPE</b>
    In: at least VBAK-VBELN
    Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
    <b>SD_SALES_DOCUMENT_COPY</b>
    <b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
    SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
    SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
    RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
    SD_PACKING_PRINT_VIEW
    SD_DELIVERY_VIEW Data collection for printing
    called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
    RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
    regards
    vinod

  • How to fetch data for sales order costing

    Hi All,
    How to fetch data for VA03 --> Extras --> Costing having cost element details.
    Thanks
    Gaurav

    Hi Gaurao ,
    There is no such function module  to extract data  in one column   , you have to  Convert all the columns data    in one column
    for period   .
    regards
    Deepak.

  • User Exit for XD02 in Sales area data in Sales tab

    Hi Sap Gurus,
    I have a problem . I need help .
    The requirement is
    In XD01 transaction , In Sales area data, In Sales tab i need to add a Check box which i already have added.This check box refers to KNVV table-Zflag
    In VA01 transaction , In menu goto -> header -> Sales , In Additional data B .
    I have another Check box.  This check box refers to Vbaktable-Zflag .
    <b>I need the code and exact locations where to put this to get my issue resolved which is given below in Functional Description</b>.
    Functional Description where you can understand better.
       Our custom logic will be initiated once the Sold-to Party (VBAK-KUNNR) is entered for any order type.  When the sold-to party is entered the user exit program will check table KNVV for the custom field ZFLAG that corresponds to the “Print Prices on Delivery Note” flag (hereafter referred to as the Pricing Flag) and populate the same setting of the flag into the ZFLAG that will be on the “Additional data B” tab on a sales order at the header.  The user can manually change VBAK-ZFLAG Pricing Flag setting to something different than what is populated for the customer master level.
    If the user happens to change the sold-to party for any reason then the user exit program should take the following approach when populating the ZFLAG Pricing Flag in a sales order:
    -     Recheck the ZFLAG Pricing Flag setting in the customer master for the sold-to party that the user has newly selected.
    The user will still have the option to manually ZFLAG Pricing Flag on a sales order after the user exit program defaults it.

    Transaction Code - XD02                     Change Customer (Centrally)
    Exit Name           Description
    SAPMF02D            User exits: Customer master data
    No of Exits:          1
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • Function Module to change the master data attachments?

    Dear Experts,
    In SAP we can enclose the attachments for the Master data. Do we have any standard function module to change the Master data attachments.
    Let me know if any?
    Thanks and regards,
    Reddy

    Hi Reddy,
    Please make use of function module :
    BINARY_RELATION_CREATE_COMMIT
    For detailed information on how to use the FM please see the thread below:
    USE OF THIS fUNCTION MODULE
    Regards,
    Dilek A.

  • How to make this function module as RFC to get data from different system?

    Hi
    I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
    Name of function module -
    RSDRT_INFOCUBE_DATA_COPY
    Any help would be really helpful
    AG

    HI,
      let us say you want to copy the data of a cube in system A to a cube in system B .
      1) create a RFC function module in system B (in this function module  call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
    2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
    for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
    Thanks
    mahesh

  • Is there any heirarchy for retreiving theorg unit or sales office data for

    Hello,
    If there is only one crm user which is assigned to different sales offices,then while monitering any activity from which sales office or org unit does the data is displayed.
    Is there any heirarchy for retreiving theorg unit or sales office data for an employee?
    regards,
    divya

    IF NOT it_vbrk[] IS INITIAL.
      Fetching Material no, sub-family, tint and coating codes
        SELECT vbeln posnr fkimg vrkme prsdt netwr matnr arktx mwsbp subfam
               codcol codcoat epaiscom codtyp length width
               INTO CORRESPONDING FIELDS OF TABLE it_vbrp
                           FROM vbrp
                               FOR ALL ENTRIES IN it_vbrk
                               WHERE vbeln   = it_vbrk-vbeln AND
                                     subfam  IN s_subfam AND
                                     codcol  IN s_codcol AND
                                     codcoat IN s_coat AND
                                     epaiscom IN s_thick.
    endif.

  • Function module to create Inspection setup data

    Hi all,
    Please tell me a function module to create inspection setup data(The tab found in MM01).
    Thank you.

    HI Sanu,
    Check with
    QIBP_INSPPOINT_CREATEFROMDATA
    QPLEXT_INSPECTION_LOT_CREATE
    QPLEXT_INSP_CREATE_REQ_CONF
    for more info search wiht QINSPCREATE*  in the SE37.
    hope it helps you.
    Thanks!

  • Function Module to get ABAP source code for a specific version

    Hi all
    Is there a function module that I can use to get the source code of another function module at a specific version?
    For example, can I call a function module passing in "FM_NAME" and "FM_VERSION" and have it return the lines of code associated with that object?
    Thanks in advance.
    Stuart

    Thanks guys
    That's incredibly helpful! I have one more question that I just thought of last night...
    Is there a way to hook into the code activation process? I want to be able to take a snapshot of the ABAP source code at each point when it is activated for use in another system, but need to be able to intercept this event and get the source code at that point in time.
    Any ideas?
    Thanks!

Maybe you are looking for