Function Module: to get Cash Journal Entries and Balances

Dear Guru's,
We need to develop a function module to display cash journal opening balance line item entries and closing balance of specific period.
we have found document entries through table TCJ_DOCUMENTS or TCJ_POSITIONS now require help to generate opening and closing balances.
Please help for the solution.
AAR

Hi,
check FM FCJ_GET_DATA_FOR_SCREEN. Next time you can try to figure out by yourself. The program for transaction FBCJ is not that complicated and you can easily find this FM used there.
Cheers

Similar Messages

  • Table or Function module to get Internal order planning and Cost element pl

    Dear All,
    Table or Function module to get Internal order planning and Cost element planning.
    Internal order planning from T-code KO13.
    Thanks in advance.
    Regards,
    Ravi
    Edited by: Ravi Chandra on Sep 13, 2011 8:08 AM

    BPEJ, BPEG, BPEP

  • Function modules to get wbs level budgets and activity level cost

    hai gurus can any one tell me the function modules or any other bapis to get the wbs level budgets and activity level costs
    thanx in advance
    afzal

    ok

  • Function Module for getting Payroll start date and end date

    Hi Gurus,
      If I give one date then is there any function module to find the payroll period start date and enddate for that given date?
    Points will be awarded
    Thanks
    Ravi

    Hi,
      Try these FMs
    HR_PAYROLL_PERIODS_GET
    HR_BEN_PAY_GET_PAYROLL_PERIODS
    HR_PAYROLL_PERIOD_GET
    HR_P06I_GET_PAYROLL_PERIOD
    Regards,
    PRashant

  • Function module to get the decimal point and leading zeros.

    Hi
    I have a requirement, where I need to add zeros at the end and beginning of the field along with decimal point.
    For Eg:
    input = 123
    output = 0123.00
    depends upon the requiremnt,number of decimals will vary
    If anyone knows function module for this  requiremnt  or how to proceed with this, Please give me reply
    Thanks&Regards
    Rama.Mekala

    hi
    use this Fm
    'conversion_exit_alpha_input'
    PP_CATT_CONVERT_DECIMAL_POINT
    for decimal points
    Cheers
    Snehi
    Edited by: snehi chouhan on Jun 23, 2008 9:28 AM

  • Function module for getting the partner details and Classifications

    Hi,
    Can any one tell me FMs for getting the Partner Details and for getting the characteristics associated with an equipment??
    Thanks

    Hi Anu,
    are you talking about the SAP Business Partner???
    Well, if yes, then just check the FM 'BAPI_BUPA_CENTRAL_GETDETAIL'.
    Or just search for oher FMs with BAPI_BUPA*.
    Hope this helps...
    Ciao Bernhard

  • Function Module to get values from MBEW and MBEWH

    All,
    I searched in SDN but could not find a suitable answer.
    Is there a SAP standard Function Module which gives the physical ending inventory (total stock) for a given period. all hsitoric values to be pulled from MBEWH.
    your response is much appreciated.
    Regards
    Kasi

    Hi,
    Better to create a query?

  • Function Module to get BEGIN and END date of a month?

    Hello everybody,
    Is there any function module to get BEGIN and END date of a month
    GIVEN EITHER THE CURRENT SYSTEM DATE or MONTH?
    Regards,
    Sanghamitra.A.

    hi
         CALL FUNCTION 'PA03_PERIODDATES_GET'
            EXPORTING
              f_abkrs               = p_abkrs1
            IMPORTING
              f_permo               = wf_permo
              f_current_begda       = wf_begda
              f_current_endda       = wf_endda
            CHANGING
              f_current_period      = wf_pabrp
              f_current_year        = wf_pabrj
            EXCEPTIONS
              pcr_does_not_exist    = 1
              abkrs_does_not_exist  = 2
              period_does_not_exist = 3
              OTHERS                = 4.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    this is the function module to get the first date and last date of a particular month
    if u have any doubts ask
    regads
    karthik
    reward points if useful

  • BAPI or Function Module for FBCJ Posting of Parked Cash Journal Entries

    Hi Experts,
    A blessed day.
    We have one requirement that requires the creation of Batch Program that will post all the outstanding (status is set in yellow) Cash Journal Entries in transaction FBCJ.
    Hereu2019s the issue, to satisfy the requirement, we either use BDC/Call Transaction OR use a Function Module/BAPI. 
    I would prefer to use Function Module/BAPI.  However, currently thereu2019s only one BAPI available for FBCJ (BAPI_CASHJOURNALDOC_CREATE).  This BAPI can only create cash journal entries BUT DO NOT change the cash journal entry for posting.  The Function Modules (Function Modules of FCJ_POST* series) cannot be used for background processing because of GUI pop-ups. These FMs also donu2019t have the Exceptions functionality for error handling and would not report the Accounting document created from the Cash Journal Entry posting.
    The problem with using BDC/Call Transaction is that it should incorporate line item selection of the cash journal entries, which I havenu2019t tried yet.  Iu2019m not sure if this is possible and if itu2019s possible, how much complexity will it incur.
    If you have the availability, would it be possible if you can help us explore on the potential solutions for this requirement?
    Thanks so much.  God bless!
    Cheers,
    ianne

    You can use RFBIBL00 program for FB01 postings. Go through the program help on how to use this program.
    This program requires a file to be on application server in a certain format.
    You may also refer the program RFBIBLT0 on how the file format should be.
    Hope this helps.
    Thanks,
    SKJ

  • Function  module to get pernt by passinf objid and otype

    Hi,
    Help me to find any function module to get pernr by using objid and otype.or table name from which we can get pernr by passing objid and otype.
    thanks,
    satish.

    You are talking about on the OM side and obtain the perner via object P?
    You can through a few method. One is using evaluation path. There is a function module called HR_STRUC_GET which allow you to pass evaluation path to get the result.
    Using that, you could create a simple evaluation path from position (object s) to person (object p). The object ID of object P is your pernr.
    Unless you have central person functionality, that might no longer be the case.

  • Function Module to get pernr number based on first name and last name

    Hi All,
    What is the Function Module to get pernr number based on first name and last name.
    Could you please help me.
    T@R.
    Vidya

    hi Vidya,
    you can get perner from PA0002 based on firs name and last name.
    use select query and get perner.

  • Function module to get attribute and value from organisation model

    Hi
    I need a function module to get the attribute and its corresponding values set on the sales org stucture.The export parameter will be the Sales Org Id.
    Please reply ASAP.
    Edited by: prem kumar on Apr 16, 2009 9:37 AM

    Hi Prem,
    If it helps, we use FM RHGA_READ_ATTRIBUTES for that in version 4.
    Kind regards,
    Garcia

  • Function Module to get usage by supplying measuring point and equipment no

    Hi,
    I want to know what is the function module to get the usage on giving the measuring point,equipment number and month.Thanks in advance.
    Regards,
    SGR

    Try this Function Module : ALM_ME_EQUIPMENT_GETDETAIL

  • Function module to get the dates from the year and the period

    Is there a function Module to get the dates from the year and the period

    Check with :
    To get last day of period use .
    LAST_DAY_IN_PERIOD_GET.
    To get last of month Use :
    RE_LAST_DAY_OF_MONTH
    HRVE_LAST_DAY_OF_MONTH
    LAST_DAY_OF_MONTHS
    ISB_PREVIOUS_PERIOD_DATE_GET
    Thanks
    Seshu

  • Function Module to get PO details based on Plant and PO date

    Hi
    1. Is there any Function Module to get PO details based on Plant and PO date?
    2. Is there any Function Module to get Material document details based on PO number?
    Thanks
    Narendra

    hi,
    check these standard reports.
    ME2L - By vendor
    ME2M - By material
    MSRV3 - By service
    ME2K - By account assignment
    ME2C - By material group
    ME2B - By tracking number
    ME2N - By PO number
    ME2W - By supplying plant
    also chck this func module.
    REPL_LIST_PURCHASE_ORDER_READ
    reward if hlpful.

Maybe you are looking for