Function module to get PPM for given product and/or location

Hi,
I want to check whether any PPM is existing for given product, location.which function module i can use for the same.

There is a BAPI that might help - BAPI_PPMSRVAPS_GETLIST which has product and location selection criteria.
Regards
Laurence

Similar Messages

Function module to get pernt by passinf objid and otype

Hi,
Help me to find any function module to get pernr by using objid and otype.or table name from which we can get pernr by passing objid and otype.
thanks,
satish.

You are talking about on the OM side and obtain the perner via object P?
You can through a few method. One is using evaluation path. There is a function module called HR_STRUC_GET which allow you to pass evaluation path to get the result.
Using that, you could create a simple evaluation path from position (object s) to person (object p). The object ID of object P is your pernr.
Unless you have central person functionality, that might no longer be the case.

Function module to get PRT for the operation in Maintenance Order

Hi,
Please tell me the function module to get PRT document for the all operation in Maintenance Order? and also tell me the FM to get all details of those PRT Docs so that I can Print those documents.
Thanks.

Hi,
Please tell me the function module to get PRT document for the all operation in Maintenance Order in TCode IW31/32/33? and also tell me the Function Module to get all details of those PRT Documents so that I can take Print out of those documents.
Thanks,
Jay.

Function module to get the valid Subcontract BOM and components for Pur doc

Hello Gurus,
I need help to create a z report of subcontracting bom and their components exploded in Schedule agreement. Seems like there is no standard report which can give the boms from purcashing doc. Can someone please tell me the name of the function module for it? any help will be highly appreciated.
Regards,
Owais

hi
u can use
STPO BOM - item
STAS BOMs - Item Selection
STZU Permanent BOM data
also check stko or mast or stpo
or
Perhaps you can run ST05 while run some transaction for display the
BOM.
Once the transaction for display the BOM gets finished, you need to stop the
trace on ST05 and then display it, you will see tables readden in the
transaction,
not tried plz check*
reward if helpful
regards
kunal
Edited by: kunal ingale on Jul 22, 2008 6:21 AM

Function Module to get the TOP N PRODUCTS

Hi Experts,
Can you please let me know how can i get the top n products configured using programming?
Please help.
Thanks,
Neeraj

Hi Neeraj,
Check Out this Function module : CRM_MKT_TOPN_PPR_PRODUCT_RULE
Hope this helps!!
Regards,
Anubhav

Function module to find users for given authorization object

Hi Experts,
I have to develop new report which display all the users who has authorization object which is given by us. i need some function modules to make my program simple.
Please help me on this..
Thanks and regards,
Raja

Hi
check the fun modules
SUSR_BAPI_USER_PROFS_GET
or check the tables
AGR_USERS
AGR_1252
UST12
AGR_PROF
AGR_TCODES
check the transactions PFCG and SSUIm and SU53 etc
Regards
Anji

Any Function Module to get date by passing week and year

Hi,
Is there any Function Module available to get date by passing week and year. For example, Week 24, Year 2005 and you get the date.
Regards,
Mira

WEEK_GET_FIRST_DAY
pass 'YYYYWW' (200524) to WEEK parameter it will give you the week start date
Raja

Function Module to get Recipes

Please let me know if there is any Function Module to get Recipes for a given product.
Thanks in advance.

hi,
Check
BAPI_CONTROL_RECIPE_GET_LIST Read control recipe list
BAPI_CONTROL_RECIPE_REQUEST Request and transfer control recipes
Regards,
Santosh

Function module to get admin within personnel area

Hi,
are there any function module to get admin for certain personnel area?
i want to used it in workflow,
to make rule agents for employee within personnel number "A", this workflow will go to admin for personnel area "A"
thanks

OK, here's the case.
in our company, we assign people to be the administrator.
each personnel area has administrator.
for example
- PERNER 34010-34050 are in personnel area 4700, with the administrator is user ABC
- PERNER 34051-34100 are in personnel area 4800, with the administrator is user EFG
so, when employee with personnel number 34010 create travel request, i want the workflow to send notification to admin/user ABC to either approve or reject the request.
how to do this?
thanks
Edited by: nzworld on Aug 10, 2010 4:30 AM

Function module to get customer balances

Hello , is there a FM to get customer balances?

hi Sooness,
i am not sure but you can check with the BAPI:
BAPI_AR_ACC_ GETKEYDATEBALANC E
function module to get AR (customer balance).
and also have a look in the link below:
http://www.sapbapi.com/bapi-list/
http://www.erpgenie.com/abap/functions.htm
With luck,
Pritam.

Function module to get BOM which WOULD be created if I open a production

Is there a function module to get the BOM which WOULD be created if I open a production order?
note that I don't have the produciton order created.
I already tried with the FM CS_BOM_EXPL_MAT_V2 and CSAP_MAT_BOM_READ.
I debuged the CO01, but I did not find it.
This BOM should include materials which are under a phantom component.
Edited by: Rodrigo Pelos on Jul 20, 2011 6:55 PM

Hi Greetson Shunmugasundaram,
thanks for the reply, but for the FMs CO_SD_RESB_FROM_BOM_CREATE and CO_SD_NEW_BOM_ASSIGNEMENT it's necessay to have an production order but I don't have it. And with CS_ALT_SELECT_COUPLED_PRODUCT I could not get a BOM.
Let me explain in more details how I'm going to use this information, I think I was not clear in my post.
I'm creating a report to compare the BOM of a production order with BOM which would be created today if I open a production order.
Then I can check if there was changes in the reservation (RESB) of the production order. If this changes happened, how many pieces. I'll check also if there was differences in consumption, because during the production order confirmation it is possible to make changes.
I would not like to make the BOM explosion "manually" because there are too many variables in the BOM like phantom, alternative, scrap and so on, but I don't know if the function module that I'd like to use exists.

Function module to get the BOM details for a material-plant combination

hi
Is there any function module to get the BOM details such as
        BOM Usage       -STLAN
        Alternative BOM -STLAL
        Items                -POSNR
        Required Quantity-EMENG
        Resulting Quantity-MENGE
        Unit of measure    -BMEIN
        Base unit of measure-MEINS
for a given material-plant combination
if so please suggest me some FMs.................
Awaiting for ur reply..............

try the below fm it may be useful for you
DATA : BEGIN OF I_BOM OCCURS 0.
        INCLUDE STRUCTURE STPOX.
DATA : END OF I_BOM.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      DATUV                 = SY-DATUM
      MEHRS                 = 'X'
      MTNRV                 = P_MATNR
      WERKS                 = P_WERKS
    TABLES
      STB                   = I_BOM
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      CONVERSION_ERROR      = 8
      OTHERS                = 9.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
regards
shiba dutta

Function module to get dependencies

Hi All,
Is there any function module to get the dependencies for a given characteristic and characteristic value.
I have tried CUKD_XREF_OBJ_CHARC , CUKD_XREF_OBJ_CHARC_SVAL but not useful.
Thanks&Regards,
Manjula.S

Hi Manjula,
please Check if following Bapis can help:
1.BAPI_CLASS_CHARVALUE_READ_ALLO Class BAPI: Read Dependencies for Characteristic Value
2.BAPI_CLASS_CHARVALUE_LOCAL_DEP Class BAPI: Maintain Local Dependency for Characteristic Value.
3.BAPI_CLASS_CHARVALUE_DEL_DEP Class BAPI: Delete Local / Global Dependencies for Characteristic Value
4.BAPI_CLASS_CHARVALUE_GLOB_DEP Class BAPI: Assign Global Dependencies to Characteristic Value.
5.BAPI_CLASS_CHAR_DELETE_DEP Class BAPI: Delete Global / Local Dependency for Characteristic
6.BAPI_CLASS_CHAR_LOCAL_DEP Class BAPI: Assign / Delete Local Dependency for Characteristic
7.BAPI_CLASS_CHAR_READ_ALLOC Class BAPI: Read Dependencies for Characteristic.
Hope It helps.
Regards,
Rahul Sinha

Function module to get the configuration of Individual objects

Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.

Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM

Function module to get BOM

Friends,
Is there any FM to get BOM(Bill of Material) when Material Number and Alternative BOM Text (stko-stktx) is given/known?
thnx.

Hi Sey,
After Calling the function module. Please check the table T_STKO and check the filed ALT_TEXT Eq 'UNRESTRICTED' and delete all other records.
Hope this may help you.
Please award points for all useful answers.
Regards,
Lanka
Hi Sey,
Please note that you have to delete T_STPO records also when you are checking at T_STKO.
Step1:
Check T_STKO -->filed ALT_TEXT Eq 'UNRESTRICTED' .
Get T_STKO-BOM_NO
Delete T_STKO IF ALT_TEXT NE 'UNRESTRICTED' .
Step2:
Delete T_STPO records For T_STKO-BOM_NO = T_STPO-BOM_NO.
Regards,
Lanka
Message was edited by: Lanka Murthy

Function module to get PPM for given product and/or location

Similar Messages

Maybe you are looking for