Functional area inconsistency while creating a PO

Hi Experts,
The problem occurs when you create a PO. When a PO is created, multiple tables are updated. I checked that the value of Functional area in below screenshot comes from table COAS which is correct.
Double click on Order:
Now, when you try to do MIGO on this PO, the Functional area comes up as EQSV. This value comes from table EKKN:
I have been told that it should be CAPX in the MIGO screen. I want a confirmation if there seems to be any issue from Functional side first as i am from ABAP.
Please help if you have any idea why this could be happening.

Hi Mukhthar,
I got this checked with my FI consultant and you are right. The Cost Center Category of Cost center was set as G and accordingly the substitution was setting the Functional area. Thank you.
Divya

Similar Messages

  • Transfer rules are mandatry While creating Info source

    Hello BI Guru's
    Is transfer rules are  mandatry while creating Info Source in BI.
    Please currect me if i am wrong.
    I have created one genric extracter and want to create info source for that in BI and planning to create Transfermation btween Datasources and infosource and from info source loading data target through transfermation.
    Please advise me which way is best way to follow the desing?

    hi,
    in BI 7.0 transfer rules and update rules are not mandantory,
    DataSource -> Transformation -> (DTP)-->Data Target
    instead of TR/UR-- transformation is there
    if helpful asign points
    regards
    harikrishna.N

  • Business Area required while creating Internal Order

    Hi Gurus,
    While creating Internal Order, Business Area is coming required.
    Please tell me how can i make it as a optional field.
    Please revert asap.
    Thank you

    gverma,
    While making the Internal Order, you are using a company code that intends to create business-area balance sheets. This is why you must enter a business area.
    You can see this text if you double-click on the error message that flashes on your status bar at the bottom of your screen, when SAP says "Enter the business area".
    Unfortunately, the only way to make this optional is to de-activate Business Area-wise financial statments for your company code, which, I suspect you might not want to do merely to be able to make an Internal Order with a BA.
    Regards
    Gulshan

  • Unable to see the sales area data while creating BP

    i am working on ides while creating BP data set (Sales area)is in not visible i am unable maintain the sales area deatils ( shiping and billing relevant data .etc).
    could some help me how to retrive the sales area data
    thanks in advance
    Swamy

    Hi Kumar,
    In that case I recommend you to check the view V_TBZJ1 in transaction SM30 and see whether the line
    Subheader  Screen text   Description  Appl. Scrn.seq.cat.
    CRM001     Sales area data CRM          CRM1  CRM001
    exist or not if not then pls maintain it.
    Also check the view V_TBZJ1C for the lines below
    Subheader  Description         Item number  Active
    CRM001     CRM:Sales area data    2            X
    If this also not exist then maintain it.
    After this you will be able to see sales area tab when you will create the BP in role SP.
    <b>Allot points if my post helps!!</b>
    Best regards,
    Vikash.

  • Some pictures are removed while creating pdf from MS word

    Hi
    I have some problems with creating PDF from MS word 2007 file.
    I'm using Acrobat X pro and MS office 2007. My system is windows XP Pro SP3.
    I'm making some documents including many tables and figures. They're created and modified in MS word and when I publish them, I have to convert them in PDF files.
    At first, the body of the document and figures are separated. I converted them individually and insert the figure pdf files to the body pdf files.
    One day, my boss wanted to combine the seperated word file into one file and I did it. There was no problem before I created PDF file.
    There are sample of the PDF.
    This is a part of missing picture. After conversion, another parts are unseen and I can find only this part.
    Sorry that I can't reveal all parts of picture.
    As you see up there, a little part of whole pictures are found (but they are reversed) and another pictures are just missing.
    Any help will be appreciated. Thank you.

    I don't know about the PC version but in the Mac version if you don't have drawing objects checked in Print and
    in the view menus, when you print to PDF, the images won't be there.
    I would assume there are the same settings in PC even if you Print to PDF printer or what other method available to PC.

  • No valid sales area Error while creating orders

    Hi,
    I am having another issue in my system. When i am trying to create a any sales transaction and enter the sold-to/transaction type i am getting error saying 'no valid sales area for the BP'. But for this same BP i am able to see the sales area in the BP tile set. WHen i click on the dropdown to select the sales area it is empty. I am not seeing any sales area inf the sales area pop-up box. Did i miss anything related to sales org download from CRM to CDB? I will keep checking.
    Please let me know if i am missing anything.
    Thanks,
    Karuna.

    Hi Wolfhard,
    You are correct. For the employees in SMOMITABT i do not have sales area in SMOMITAREA?
    What i did is i added these employees in PPOMA_CRM and did a delta uding CRMD_DOWNLOAD_OM. But this did not get any data to SMOMITAREA.
    I also tried adding ORG in SMOEAC itself but that did not help either. Do you have any suggestions?
    Thanks you,
    Karuna.

  • Partner function issues while creating SA using LSMW

    Hi,
    I am opening a new thread (though similar question has been put by Vihaan in below thread)
    Tax code in SA - LSMW
    We are creating SAs via LSMW IDOC method (Message Type - PURSAG_CREATE and Basic Type - PURSAG_CREATE01), all our SAs being created w r to Contract and Contract has multiple OA and PI partner functions. So while creating SA we are passing unique OA and PI value (from list of valid OA/PI avaialble in contract) in LSMW structures - E1BPMEOUTPARTNER and E1BPMEOUTPARTNERX.
    Values passed are mentioned below:
    E1BPMEOUTPARTNER               Partner Information for Outline Agreement
        Fields
            PARTN_ROLE                   Partner Function
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-PARTN_ROLE = 'BA'.
            PLANT                        Plant
            SUBRANGE_TX                  Description of Vendor Subrange
            LANGU                        Language Key
            LANGU_ISO                    Language according to ISO 639
            PARTNR                       Reference to other vendor
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-PARTNR = '1XXXXXXXX9'.
            DEF_PARTNR                   Default Partner
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNER-DEF_PARTNR = 'X'.
            DELETE_IND                   Deletion Indicator in Purchasing Document
    E1BPMEOUTPARTNERX              Change Parameter Partner Data (Outline Agreement)
        Fields
            PARTN_ROLE                   Partner Function
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-PARTN_ROLE = 'BA'.
            PLANT                        Plant
            SUBRANGE_TX                  Description of Vendor Subrange
            LANGU                        Updated information in related user data field
            LANGU_ISO                    Updated information in related user data field
            PARTNR                       Updated information in related user data field
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-PARTNR = 'X'.
            DEF_PARTNR                   Updated information in related user data field
                                Rule :   Constant
                                Code:    E1BPMEOUTPARTNERX-DEF_PARTNR = 'X'.
            DELETE_IND                   Updated information in related user data field
    Now issue is SAP is not recognizing above mentioned partner value and throwing error as Following mandatory roles missing in partner maintenance: OA
    If the reffered contract has single OA and PI LSMW is running fine and creating SA successfully but issue is coming only when we have multiple OA/PI.
    Has anybody faced similar issue or aware if any OSS note which resolves this issue, please advise.
    Thanks,
    Yogesh

    Hi Jurgen,
    I have created a separate source structure for passing partner function and now have below source structure:
    Source Structures
           HEADER_SA            Header Structure
               PARTNER_SA          PARTNER STRUCTURE (Lower level to Header)
               ITEM_SA              Item Structure (Lower level to Header but at the same level as Partner)
    Then created a separate file for partner having both OA and PI value as shown below (ID is common field between all three structures Header, item and Partner):
    ID     PARVW     LIFN2     DEFPA
    1     BA     1XXXXXXX9     X
    1     RS     1XXXXXXX7     X
    Now after convert data step it considers above values for partner role but still LSMW fails with same error "Mandatory PF missing, OA, PI"
    Also, one more info wanted to share- if in my contract I put a tick mark against one of the partner OA/PI in DEFAULT BOX, it works fine but that does not make any sense as the whole pupose of having multiple OA/PI is to give option to business of selecting one of the avaialble OA/PI.
    FYI - I have opened a customer message to SAP, let see what they suggest.
    Thanks,
    Yogesh

  • Route of the operator.... while creating mapping for idoc to file

    Hi,
    Scenario is IDOC to File but certain rules are there while creating a mapping in XI.
    This is the description for my scenario :
    Within XI this Idoc message needs to be translated into 2 text files:
    1 file for the route of the operator
         - Read the idoc data.
         - When reading a new order first get the customer. This will be a new line in the file.
            The customer number will be set into the filed u2018CustomerIDu2019.
         - Then read the items. For every item create a new line in the file. The machine number will be mapped to the field CustomerID
         - The field RouteOrder should get a sequential number. Starting at 001 and updated by 1 for every new line.
    Could you please guide me how can i implement this above scenario.
    Regards,
    Y.Raj

    Within XI this Idoc message needs to be translated into 2 text files:
    this can be done using multimapping i.e. defining your target messages at mapping tabs in your message mapping.
    When reading a new order first get the customer. This will be a new line in the file.
    The customer number will be set into the filed u2018CustomerIDu2019.
    If there is some condition for identifying new order then you should put condition based on input field.
    if customer no doesnot exists in order then RFC lookup can fetch customerno
    The field RouteOrder should get a sequential number. Starting at 001 and updated by 1 for every new line.
    for this declare varaible in global section and use the same or some builtin function can be used for the same.
    Rajesh

  • How to get list of FMs while creating Contact Person from User Admin Link

    Hi Experts,
    We are implementing SAP ECommerce for my SAP ERP. In one of our requirements, we need to develop MASS UPLOAD program which will take input as Contact Person's first name, last name, address and authorization details and create new Contact Person as it is done through User admin link.
    To develop above tool, I want to trace all the Function Modules which are called while creating new Contact Person from User admin link.
    Please provide your inputs on how I can get the trace of FMs.
    Thanks,
    Keya

    Hi Keya,
    For a B2C eCommerce solution, you are looking at FMs BAPI_CUSTOMER_CREATEFROMDATA1 and ISA_USER_CREATE and the table USAPPLREF which holds the reference to the customer and user.
    To get the FMs called, you would have to do a session trace during B2C user registration / B2B user creation from UME. You could search this forum on a 'how-to' for doing a session trace or lookup the development and extension guide that provides a lot of useful information.
    Cheers,
    Ashok.

  • Error while creating sales order with ref using SD_SALESDOCUMENT_CREATE

    Hi
    I am creating sales order with reference using function module SD_SALESDOCUMENT_CREATE , while creating i am getting error
    Document doesn't have document category even thougth i am passing document category in header as well as item lavel.
    In VBUK table there is no value for VGTYP.
    Can you please help me how to resolve it.
    Thanks & regards
    kiran

    Problem resolved by passing   REFDOC_CAT in the FM along with  SD_DOC_CAT.
    Thanks

  • Error while creating an Item Proposal

    Hello Experts,
    When I am trying to create an Item proposal (T Code VA51 for order type PV) , after entering the Description , Validity dates, Material and Qty, while saving system is issuing an hard error " Sold to Party is not maintained in the sales area".
    While creating an item proposal why would the system check for the Sold to party? I have checked the forum for such an error message but could not find any. Please help me in resolving this issue.
    Regards
    Sai

    Thanks for your inputs. There is some additional enhancement in the system to check the sold to party during order processing in the program SAPMV45A. That is causing this error.
    Regards
    Sai

  • Derivation of Functional Area in FI document

    Hi
    We have an issue with the Functional Area derivation while posting the FI document. One FI document got posted with 4 line items, with 3 GL accounts. Two line items are from one GL(Which has cost center) and remaining two belongs to other GL accounts. Here the issue is, one of the line item(same GL) has Functional area and other line item doen't have functional area.
    Is there any configuration/check needs to be done in deriving the function area. Where I can find that in the system(Our system is 4.7). When I checked the posting progam, I found a note saying Functional Area will be visible/invisible depending on the cost-of-sale flat active/inactive. Cost-of-sale flag is active for the company code.
    would you please let me know, how this was happend.?. How to over come this.
    Thanks in advance.
    Thanks
    Lakshman

    Hi Lakshman,
    1. For activation/deactivation of Cost of Sales Accounting, the path is IMG - Financial Accounting - Finacial Accounting Global Settings - Company Code - Cost of Sales Accounting - Activate COst of Sales Accounting for Preparation
    2. You can derive Funcational Area by maintaining Substituation Rules and Activating them. Follow the path  - IMG - Financial Accounting - Finacial Accounting Global Settings - Company Code - Cost of Sales Accounting -  Set up Substitution for Cost of Sales Accounting - Define Substitution.
    After define substitution, activate the same.
    Hope this will help you.
    Thanks & Regards

  • Function Area derive from cost center

    Hi, here is a question.
    The function area was input in the cost center master data. Cost center A ( Function area 1000), Cost center B (Function area 2000)
    Then creat a PO with Account Assignment Category(K), Item Category (B), input the cost center A in the PO.
    When I do MIRO, I change the cost center (A TO B), but the function is still 1000, not change to 2000. But if I delete the Function area in MIRO first, then change the cost center, the function area update to 2000.
    There is no default function area in GL account and cost element, also no substitution.
    Is it standard in SAP?  I want the Function area can be updated with the cost center. Any method?

    Here is what SAP help says about this.
    Functional area field for postings - ready for input?
    You can enter the functional area directly when entering G/L account postings, provided the "Functional area" field is shown in the field status group of the G/L account.
    SAP recommends that you do not show the "Functional area" field in the field status group of the G/L account, but rather that you have the system determine the functional area of the account assignment. This eliminates the risk of the user entering incorrect functional areas.
    You said you have functional area in cost center master data.  When you post documents, do you get func. area from the cost center automatically or not?

  • No Functional Area Found Error while creating service data in me22n

    Hello,
    While creating service data for a purchase order in ME22n I am getting error like " No functional area found"  .
    Please tell me how to maintain the Functional area for a particular GL account
    In the help i can found that we can find the functional area "The functional area can be determined either using the cost element, the account assignment object (such as the cost center or order)"
    How we can determine this please through some light on this statement.
    Thanks
    Pradeep
    Moderator message: not directly related to ABAP development, please post again in the appropriate functional forum.
    locked by: Thomas Zloch on Oct 15, 2010 9:55 AM

    Hello Madhav,
    You have to maintain your 'business transaction profile' (SPRO->CRM->IC Web->Business Transaction->Define bus. trans. prof.) in the customizing and assign that profile to your IC WebClient profile (the one you assigned in the org. model)
    In the business transaction profile you must make sure that at least one transaction type (e.g. ZSRV) is assigned as 'Dependent business transaction' and that entry is flagged as 'Service'.
    Also make sure that that transaction type (ZSRV) has leading business transaction category 'Service process' (BUS2000116).
    This should solve your problem!
    Kind regards,
    Joost

  • Error while creating a Message Area

    Hi All,
    When I create a Message Area using the UI element 'MessageArea', I get the following error message at the bottom of the screen:
    "Note: Multiple message areas have been implemented, but only one is supported"
    I just have only one Message Area created, but still I get this error.
    Regards,
    Tom

    > 1) I am getting the error message"Valuation area not defined", while creating a requisition. How to solve this problem?
    Please Go to OMS2 Material types and Select Material Type and set Qty / Value is Checked in all Valuation areas. Also go to Material Master and ensure all the values Maintained in Accounting view.
    > 2) We can put a purchase order on hold. What is the equivalent thing in Purchase requisition?
    The Hold Functionality is for External Documents only.
    > 3) What is the difference between holding a PO and changing the PO by ME22n? What are the fields which change PO does not open up, but hold PO opens up?
    Whenever you are not sure about the Details in PO you can put the Document on Hold and Later you can Save after.
    > 4) The tax code is set as default in PO. We want to make a PO of a material which is usually taxable, but not in this case. But the tax code is set as default. So, how to overcome this?
    You can not set Default Tax code for Purchase order ME21N. Further the Tax codes can be Pulled into Purchase Order thru Purchase info Records.
    Regards,
    Ashok

Maybe you are looking for