Functional requiremnts for table level entry from webui in crm 7.0

Hi Experts.
Please guide me how to give the functional requirements to the technical consultants.
Also need to know how to navigate from the webui in crm 7.0, to get the table details. If i enter F2, I can see the details of the
feild, I need to know how to get the feild name and the table name where the data is getting saved in the sytem.
I need the steps navigating from webui to the GUI table level. Please help me out
Waiting for your valuable input.
Regards.
karthik J

Refer to this [WIKI|http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUIFramework]
It should give you a good start.
Thanks
Vishal

Similar Messages

How to read and display table data entries from ERP in CRM

Hello experts,
I am new to CRM. I need to read data base entries from ERP in CRM system. What would be the best way to do . The table is a standard SAP table with a custom include (several customer fields). Calling a web service would be the best way..? or is there any other way that I can do it too.
Also, to display these entries what would be the best tool? Should I built my own transaction/report to do it?
Any advise or guidance would be a great kick start to learn the CRM development environment.
Regards,
jaffery

Hi,
Check the below wiki link if it helps.
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Also, you can try an option of transaction launcher.
Hope this helps.
Regards,
Chandrakant

Function module for table control

Hi experts,
I am creating the BDC program, In that I need to select the particular item from the table control say for example item 0010 or 0020 based on the input file and need to process from there.
Is there any function module to select the particular item by passing item no say 0010 or 0020.
Thanks in advance
sai

Hi
I suppose there is no function module for table control.
below solution might be useful to you.
1) Do BDC recording for the table control with each condition you would like to incorporate in your program.
2) copy the code of Table Control recording in your program and place the code in Loop of internal table.
3) based on the condition call the respective BDC recording of the table control
4) By the above steps you can manage the table control based on the condition.
Regards
Santosh Kumaar.M

Function Module for Translation of text from Lower to Upper Case

Hi All,
Can any one give me function module for translation of text from lower to upper case.
If we use Translate statement for the program in the Extended Syntax check it is giving error.
Thanks in advance.
Regards,
srinivas

Hi Srinivas,
You can use any of the Function Modules below.
AIPC_CONVERT_TO_UPPERCASE
2054_TRANSLATE_2_UPPERCASE
HR_99S_CONV_UPPER_CASE
Please reward if useful.
regards,
Raj

Function Module For Item Level Details of a Sales Order

Hi Guys,
I have to get the item level details for a particular sales document no ..I want to know if there is any function module existing for the same.
Also I need any function module for getting the contact information such as contact form (KNVK-ANRED),contact name(KNVK-NAM1),contact name(KNVK-NAMEV),Contact number (KNVK-TELF1).
Please let me know if anyone is aware of it.
Thanks in Advance,
Mayank

SD_SALES_DOCUMENT_READ Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
SD_SALES_DOCUMENT_READ_POS Reads sales document header and item material: tables VBAK, VBAP-MATNR
SD_DOCUMENT_PARTNER_READ partner information including address. Calls SD_PARTNER_READ
SD_PARTNER_READ all the partners information and addresses
SD_DETERMINE_CONTRACT_TYPE
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
SD_SALES_DOCUMENT_COPY
RV_ORDER_FLOW_INFORMATION Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod

Steps for table level reorganisation

Dear Friends.
We are going for Archiving on big tables like EDI40 table.
So I have decided to regain space after archiving by using table level reorg is it ok??
can you please suggest necessary steps and prerequisites.
Thanks in advance.
Regards
JIggi

Dear All,
I have done following steps:--
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\wiqadm.WSECCQA>brtools
BR0651I BRTOOLS 7.00 (24)
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.21
BR0656I Choice menu 1 - please make a selection
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
3
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.25
BR0663I Your choice: '3'
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.25
BR0656I Choice menu 7 - please make a selection
Database segment management
1 = Reorganize tables
2 - Rebuild indexes
3 - Export tables
4 - Import tables
5 - Alter tables
6 - Alter indexes
7 - Additional segment functions
8 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
1
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.28
BR0663I Your choice: '1'
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.28
BR0657I Input menu 91 - please check/enter input values
BRSPACE options for reorganization of tables
1 - BRSPACE profile (profile) ...... [initWIQ.sap]
2 - Database user/password (user) .. [/]
3 ~ Reorganization action (action) . []
4 ~ Tablespace names (tablespace) .. []
5 ~ Table owner (owner) ............ []
6 ~ Table names (table) ............ []
7 - Confirmation mode (confirm) .... [yes]
8 - Extended output (output) ....... [no]
9 - Scrolling line count (scroll) .. [20]
10 - Message language (language) .... [E]
11 - BRSPACE command line (command) . [-p initWIQ.sap -s 20 -l E -f tbreorg]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
6
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.38
BR0663I Your choice: '6'
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.38
BR0681I Enter string value for "table" []:
BDCP
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.41
BR0683I New value for "table": 'BDCP'
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.41
BR0657I Input menu 91 - please check/enter input values
BRSPACE options for reorganization of tables
1 - BRSPACE profile (profile) ...... [initWIQ.sap]
2 - Database user/password (user) .. [/]
3 ~ Reorganization action (action) . []
4 ~ Tablespace names (tablespace) .. []
5 ~ Table owner (owner) ............ []
6 ~ Table names (table) ............ [BDCP]
7 - Confirmation mode (confirm) .... [yes]
8 - Extended output (output) ....... [no]
9 - Scrolling line count (scroll) .. [20]
10 - Message language (language) .... [E]
11 - BRSPACE command line (command) . [-p initWIQ.sap -s 20 -l E -f tbreorg -t "
BDCP"]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.45
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0291I BRSPACE will be started with options '-p initWIQ.sap -s 20 -l E -f tbreo
rg -t "BDCP"'
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.45
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRTOOLS time stamp: 2009-04-01 15.14.46
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR1001I BRSPACE 7.00 (24)
BR1002I Start of BRSPACE processing: seagjxpe.tbr 2009-04-01 15.14.46
BR0484I BRSPACE log file: F:\oracle\WIQ\sapreorg\seagjxpe.tbr
BR0280I BRSPACE time stamp: 2009-04-01 15.14.48
BR1009I Name of database instance: WIQ
BR1010I BRSPACE action ID: seagjxpe
BR1011I BRSPACE function ID: tbr
BR1012I BRSPACE function: tbreorg
BR0280I BRSPACE time stamp: 2009-04-01 15.14.52
BR0657I Input menu 353 - please check/enter input values
Options for reorganization of tables: SAPSR3.BDCP (degree 1)
1 ~ New destination tablespace (newts) ..... []
2 ~ Separate index tablespace (indts) ...... []
3 - Parallel threads (parallel) ............ [1]
4 ~ Table/index parallel degree (degree) ... []
5 - Create DDL statements (ddl) ............ [yes]
6 ~ Initial extent size category (initial) . []
7 ~ Sort by fields of index (sortind) ...... []
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2009-04-01 15.14.55
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2009-04-01 15.14.55
BR1108I Checking tables for reorganization...
BR0280I BRSPACE time stamp: 2009-04-01 15.14.56
BR1112I Number of tables selected/skipped for reorganization: 1/0
BR0280I BRSPACE time stamp: 2009-04-01 15.14.56
BR0370I Directory F:\oracle\WIQ\sapreorg\seagjxpe created
BR0280I BRSPACE time stamp: 2009-04-01 15.14.56
BR1101I Starting online table reorganization...
BR0280I BRSPACE time stamp: 2009-04-01 15.14.56
BR1124I Starting reorganization of table SAPSR3.BDCP ...
BR0280I BRSPACE time stamp: 2009-04-01 15.17.24
BR1105I Table SAPSR3.BDCP reorganized successfully
BR0280I BRSPACE time stamp: 2009-04-01 15.17.24
BR1141I 1 of 1 table reorganized - 2152767 of 2152767 rows processed
BR0204I Percentage done: 100.00%, estimated end time: 15:17
BR0001I **************************************************
BR0280I BRSPACE time stamp: 2009-04-01 15.17.24
BR1102I Number of tables reorganized successfully: 1
BR0280I BRSPACE time stamp: 2009-04-01 15.17.24
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
BR0280I BRSPACE time stamp: 2009-04-01 15.18.05
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2009-04-01 15.18.05
BR1022I Number of tables processed: 1
BR1003I BRSPACE function 'tbreorg' completed
BR1008I End of BRSPACE processing: seagjxpe.tbr 2009-04-01 15.18.05
BR0280I BRSPACE time stamp: 2009-04-01 15.18.05
BR1005I BRSPACE completed successfully
BR0292I Execution of BRSPACE finished with return code 0
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.05
BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRTOOLS:
c
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.10
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.10
BR0656I Choice menu 7 - please make a selection
Database segment management
1 + Reorganize tables
2 - Rebuild indexes
3 - Export tables
4 - Import tables
5 - Alter tables
6 - Alter indexes
7 - Additional segment functions
8 - Reset program status
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
b
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.13
BR0663I Your choice: 'b'
BR0673I Going back to the previous menu...
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.13
BR0656I Choice menu 1 - please make a selection
BR*Tools main menu
1 = Instance management
2 - Space management
3 + Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
9
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.15
BR0663I Your choice: '9'
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.15
BR0680I Do you really want to exit BRTOOLS? Enter y[es]/n[o]:
y
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.17
BR0257I Your reply: 'y'
BR0280I BRTOOLS time stamp: 2009-04-01 15.18.17
BR0652I BRTOOLS completed successfully
And I compared space before reorg and after reorg.
I got 5 Gb space back .
I hv done the whole procedure on BDCP table on WIQ.
Shall i do the same procedure on production server.
Thanks in advance.
JIggi

Function module for access OM Data from infotype 1001

We had a function module for accessing OM data viz. Infotype 1001. Could you let me know.
Advanced thanks,
Dasaradh kosana

Hi Dasaradh,
Do you want the fm which fetches the data from HRP1001 , if this is the case you can use this FM RH_READ_INFTY_1001.
Reward Points if it is helpful
Regards,
Kiran I

Error in function module for inbound processingwhile testing from we19

hi,
I have developed a custom function module for processing inbound idoc for creating material using bdc...the problem is that when i am trying to test my idoc using we19 and calling my function module in debug mode an error is displayed showing 'interface for function module is incorrect' and also i am unable to see my function module in debugging mode.It is only displaying the error message...
I have given all the parameters necessary (import,export or tables) and found no error in the interface...I think the problem is appearing before my function module is being called....Also on seeing the short dump analysis I have seen that the error is in the form 'Idocs passed to application' which is not a part of the function module developed by me...
I am unable to understand why this error message is being displayed...
Please help me out of this..

ya i know that ..But I wanted to create a simple one..moreover the problem is not with bdc....It is with the function module interface..
Also I want to ask a question that I had to define all the parameters (in the function module ) by data declaration statements in the function group top include..
If i dont do that say the first error is when i write loop at idoc_contrl ..idoc_contrl is not declared by a data statement..So IO had to write a data statement:
Idoc_contrl type table of edidc..I have seen that in other function modules (idoc inbound processing) no such data declaration is done..

Function group for table T007V

Hi,
How can I find out table maintenance function group for standard SAP tables. If it does not exist then in which package should I create it.
Thanks,
Prateek

Function Group are not assigned to tables... Function Group are assigned to Maintenance Views .. since no standard maintenance view exist for this table...
So no function group is associated...
You can create table maintenance for this table and assign any Z- Function Group u like..
Reward if usefl
Regards
Prax

Function module for no of entries in a table

is there any function module by which we can get the number of entries in a database table?

Hi,
You can use like:
select count(*)from dbtab into cnt.
which will return u the no. of records.
Regards,
Renjith Michael.

Function Module for Revision Level.

Hi all,
Is there any function module to retrieve details of MM and PO Revision Level..
In MM it is present in basic View..in AEOI table..,but i still go for function module.
Thanx in advance

Hi,
BAPI_PO_DETAIL1
REVISION_LEVEL_SELECT
CCAP_REV_LEVEL_MAINTAIN
Also,
1.You can see this revision changes history in the version tab itself.
2.You can also get from PO - Environment - Header changes details.
3.Check the table EREV Version in Purchasing in SE16. This will give all the required details for the PO.
4.You can fetch the data from this table to appear in the PO print out.
If you want to know the material revision level as of some date then you can use function module REVISION_LEVEL_SELECT. Pass material & date and it will tell you the active revision on that date.
If you want to know the table, then AEOI where you can enter the material no in field OBJKT & AETYP as 41 (Material). You will get the list of revision levels for the material.
thanks & regards,
ShreeMohan

About the effect for batch level conversion from material to plant level

Dears,
Now we use batch management at material level in our system, now we want to change to batch level from material level to plant level, what effects or risks it will bring during the process of conversion?
Thanks a lot
Zhongkai

Hi
check the following SAP help link it is very helpful:
http://help.sap.com/saphelp_40b/helpdata/es/d2/1d4b6e5733d1118b3f0060b03ca329/content.htm
at the link you can find the following
Specify batch level and activate status management
In this IMG activity, you specify the following:
the level at which batch numbers are unique
whether batch status management is active in the client
the plants in which batch status management is active
the initial status of new batches
Batch level
Batch numbers can be unique at the following levels:
at plant level
at material level
at client level for a material
If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to numbers within Inventory Management using a transfer posting 'material to material'.
If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical. In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
Standard settings
In the standard R/3 System, batches are unique at plant level.
Activities
To change the batch level, proceed as follows:
      1. Choose the level at which you want your batches to be unique.
      2. Save the new settings and choose Back.
      3. Select function Batch level -> Conversion.
      4. If necessary, carry out the conversion in test mode first.
Further notes
Note that you cannot reset conversion from plant level to a higher level in the standard.
If you create a client by copying an existing client, initially, there are no settings in the target client at batch level. The system makes the settings in the target client only when you have carried out an activity (maintaining master data or posting a goods movement, for example).
SETTINGS BEFORE/AFTER CLIENT COPY:
Source client Target client
Client level Material level
Material level Material level
Plant level Plant level
Batch status management
Batch status management is an additional function provided by the standard R/3 System.
Standard settings
Batch status management is not active in the standard R/3 system.
Activities
To activate batch status management, proceed as follows:
      1. Choose Batch status management active.
      2. Save the new setting and choose Back.
      3. Choose Batch status management -> conversion.
      4. If necessary, carry out the conversion in test mode first.
Further notes
Batch status management is linked to the batch level. At material and at plant level, the status management settings are valid within the client, that is for all plants. However, if you have defined batches to be unique at plant level, you have to select the plants in which status management is to be active using function Plants with status management.
If you activate status management, all existing batches are assigned status 'unrestricted'. If you deactivate status management, the systems transfers all restricted batches to unrestricted stock within conversion. Restricted stock only exists if status management is active.
If you create a client by copying an existing client, status management is automatically activated if batches exist in the target client, independent of the settings in the source client. If no batches exist in the target client, it is not activated. In this case, you have to activate or deactivate status management manually, if required.
Plants with batch status management
Activities
To select the plants in which status management is to be active, proceed as follows:
      1. Set characteristic Batch status management for those plants in which batch status management is to be active.
      2. Save your settings and choose function Back.
      3. Choose function Batch status management -> conversion
      4. If necessary, carry out the conversion in test mode first.
Initial status of a new batch
Using this function, you can specify for each material type which initial status new batches are to be assigned. However, if you use a quality management system, this specifies the status of the batches.
Hope it will help
Best Regards

Function modules for table operations

Hi!
I found the module "rfc_get_table_entries", can s.o. tell me some other standard function modules to work with database information?
rfc_get_table_entries returns a concatenated Database line, it would be better for me to get a table with the correct structure.
With best regards
Björn K.

Björn,
how about RFC_READ_TABLE? you'll receive the structure in FIELDS and the content in DATA.
if you know the fields you want to receive, you can add them in the FIELDS table as input parameter.
kr, achim

Function Module for UNPACKING Handling Unit from Inbound Delivery

Hello Experts,
I am working on a RFID program to Receive goods from vendor...
One of the steps of the program should CHANGE the quantity inside a received batch.
To do so, I need to UNPACK the Handling Unit first... then change the quantity.
I am using the following Function Modules to do so:
- 'HU_GET_HUS'
- 'V51P_FILL_GT'
- 'HU_PACKING_AND_UNPACKING'
- 'HU_POST'
First 2 FM works fine...
But when I get to the 3rd one, I keep getting "NOT_POSSIBLE" error...
Have anyone done this before??
Here's the code I've done to do some testing before putting it into my code...
PLEEEEEEEEEEEASE HELP.
TYPE-POOLS: vsep. PARAMETERS: p_venum LIKE vekp-venum.
DATA: wa_object LIKE hum_object,
 it_object TYPE TABLE OF hum_object.
DATA: wa_v51vp LIKE v51vp,
 it_v51vp TYPE TABLE OF v51vp.
DATA: flag LIKE v51p_select_flags.
DATA: it_venum TYPE STANDARD TABLE OF hum_venum,
 ef_rcode LIKE sy-subrc,
 et_vekp TYPE STANDARD TABLE OF vsep_s_vekp,
 et_vepo TYPE STANDARD TABLE OF vsep_s_vepo,
 et_vevw TYPE vsep_t_vevw,
 et_highest_level TYPE vsep_t_venum,
 et_messages TYPE huitem_messages_t,
 is_packing_request TYPE vsep_s_pithu,
 es_p_request TYPE vsep_s_pithu,
 es_item LIKE vepovb,
 cs_header LIKE vekpvb,
 ef_number TYPE vpobjkey,
 et_header TYPE STANDARD TABLE OF vekpvb,
 et_items TYPE STANDARD TABLE OF vepovb,
 et_item_serialno TYPE vsep_t_rserob,
 et_history TYPE hum_history_t,
 et_highest_levels TYPE hum_venum_t.
DATA: wa_venum LIKE hum_venum,
 wa_vepo TYPE vsep_s_vepo,
 wa_vekp TYPE vsep_s_vekp,
 wa_items TYPE vepovb,
 wa_header TYPE vekpvb.
START-OF-SELECTION.
wa_venum-venum = p_venum.
APPEND wa_venum TO it_venum.
CALL FUNCTION 'HU_GET_HUS'
 EXPORTING
 it_venum = it_venum
 IMPORTING
 et_header = et_header
 et_items = et_items
 et_item_serialno = et_item_serialno
 et_history = et_history
 et_highest_levels = et_highest_levels
 et_messages = et_messages
 EXCEPTIONS
 hus_locked = 1
 no_hu_found = 2
 fatal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_header INDEX 1 INTO wa_header.
CALL FUNCTION 'V51P_FILL_GT'
 EXPORTING
 it_venum = it_venum
 IMPORTING
 ef_rcode = ef_rcode
 et_vekp = et_vekp
 et_vepo = et_vepo
 et_vevw = et_vevw
 et_highest_level = et_highest_level
 et_messages = et_messages
 EXCEPTIONS
 hu_locked = 1
 no_hu_found = 2
 fatal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE et_vepo INDEX 1 INTO wa_vepo.
READ TABLE et_vekp INDEX 1 INTO wa_vekp.
MOVE-CORRESPONDING wa_vepo TO is_packing_request.
is_packing_request-belnr = wa_vepo-vbeln.
is_packing_request-quantity = wa_vepo-vemng.
is_packing_request-veanz = '-1'.
is_packing_request-meins = wa_vepo-vemeh.
is_packing_request-exidv = wa_vekp-exidv.
CALL FUNCTION 'HU_PACKING_AND_UNPACKING'
 EXPORTING
 is_packing_request = is_packing_request
 IMPORTING
 ef_rcode = ef_rcode
 es_p_request = es_p_request
 es_item = es_item
 CHANGING
 cs_header = cs_header
 EXCEPTIONS
 missing_data = 1
 hu_not_changeable = 2
 not_possible = 3
 customizing = 4
 weight = 5
 volume = 6
 serial_nr = 7
 fatal_error = 8
 OTHERS = 9.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'HU_POST'
 EXPORTING
 if_synchron = 'X'
 if_commit = 'X'
 IMPORTING
 ef_number = ef_number.
break nunfx004.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks in advance,
Fernanda

Hi ,
Check this code.
Pack componet HU to Overpack HU. *
 l_packing_req-venum = g_ovrp_venum. "Overpack Internal HU
 l_packing_req-exidv = g_ovrp_exidv. "Overpack External HU
 l_packing_req-veanz = '1'. "PACK Constant
 l_packing_req-sub_hu_venum = l_int_venum.
 l_packing_req-sub_hu_exidv = l_int_exidv. "Componet External HU
 l_packing_req-velin = '3'. "HU Type Constant
 l_packing_req-quantity = '1.000'.
call function 'HU_PACKING_AND_UNPACKING'
 exporting
 is_packing_request = l_packing_req
 exceptions
 missing_data = 1
 hu_not_changeable = 2
 not_possible = 3
 customizing = 4
 weight = 5
 volume = 6
 serial_nr = 7
 fatal_error = 8
 others = 9.
 if sy-subrc <> 0.
error
 clear: v_msgv1, v_msgv2, v_msgv3.
 v_msgv1 = text-031.
 PERFORM display_message USING v_msgv1 v_msgv2 v_msgv3.
 leave to screen sy-dynnr.
 endif.
No Errors --> POST HU
 call function 'HU_POST'
 exporting
 if_synchron = 'X'
 if_commit = 'X'.
plz write what you are passing to 'HU_PACKING_AND_UNPACKING' and hu_post fm.
Regards
Mohinder Singh Chauhan

Urgent: Function module for getting the input from user using a pop up

Hi all,
My requirement at user commmand a pop up should appear asking the user to enter the session name for the bdc session to be created.
My report allows the user to enter the session name of his choice.
I need the name of the function module which can do this.
Thanks
Pritish

better to create one FM to pop-up.
check this :
function y_pop_up_get_distributor_time.
*"*"Local interface:
*" IMPORTING
*"     REFERENCE(W_ROUTE) LIKE VBAP-ROUTE
*"     REFERENCE(W_VBELN) LIKE VBAK-VBELN
*"     REFERENCE(W_VGBEL) LIKE VBAK-VGBEL
*"     REFERENCE(W_VSTEL) LIKE VBRP-VSTEL
*"     REFERENCE(W_AUART) LIKE VBAK-AUART
*" EXPORTING
*"     REFERENCE(W_FROM_DATE) TYPE SY-DATUM
*"     REFERENCE(W_FROM_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TO_DATE) TYPE SY-DATUM
*"     REFERENCE(W_TO_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TKNUM) TYPE VTTK-TKNUM
*"     REFERENCE(W_RC) TYPE SY-SUBRC
*"     REFERENCE(W_DEPT_DATE) TYPE SY-DATUM
*"     REFERENCE(W_DEPT_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_REPO_DATE) TYPE SY-DATUM
*"     REFERENCE(W_REPO_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_PLNT_DATE) TYPE SY-DATUM
*"     REFERENCE(W_PLNT_TIME) TYPE SY-UZEIT
*"     REFERENCE(W_TRUCK_NO) TYPE YW2_TIMEENTRY-TRUCKNO
*"     REFERENCE(W_LIFNRN) TYPE YW2_TIMEENTRY-LIFNR
* SET PF-STATUS 'STATUS_100' OF PROGRAM SAPLZ2SLS.
*CLEAR:W_DATE_FROM, W_DS_TIME_1, W_ADATE,
*      W_ATIME,W_BDATE,W_BTIME, W_CDATE, W_CTIME.
clear : w_route1, w_vbeln1,w_vgbel1,
        w_vstel1,w_auart1.
w_route1 = w_route.
w_vbeln1 = w_vbeln.
w_vgbel1 = w_vgbel.
w_vstel1 = w_vstel.
w_auart1 = w_auart.
clear: w_date_to, w_date_from, w_adate,w_atime,
         w_ds_time_1, w_ds_time_2,
         w_bdate, w_btime, w_cdate, w_ctime.
call screen 100 starting at 10 2 ending at 115 13.
if w_ok_code = 'SAVE'.
    w_rc = 0.
    w_from_date = w_date_from.
    w_from_time = w_ds_time_1.
    w_to_date    = w_date_to.
    w_to_time    = w_ds_time_2.
    w_tknum      = w_tknum.
    w_dept_date = w_adate.
    w_dept_time = w_atime.
    w_repo_date = w_bdate.
    w_repo_time = w_btime.
    w_plnt_date = w_cdate.
    w_plnt_time = w_ctime.
    w_truck_no   = sg_truckno.
    w_lifnrn     = w_lifnr.
else.
    w_rc = 1.
endif.
* IF w_ok_code = 'CANC'.
*    W_rc = 1.
* ELSE.
*    W_rc = 0.
*    W_FROM_DATE = w_date_from.
*    W_FROM_TIME = w_ds_time_1.
*    W_TO_DATE    = w_date_to.
*    W_TO_TIME    = w_ds_time_2.
*    W_TKNUM      = W_TKNUM.
*    W_DEPT_DATE = W_ADATE.
*    W_DEPT_TIME = W_ATIME.
*    W_REPO_DATE = W_BDATE.
*    W_REPO_TIME = W_BTIME.
*    W_PLNT_DATE = W_CDATE.
*    W_PLNT_TIME = W_CTIME.
* ENDIF.
clear w_ok_code.
endfunction.
Regards
Prabhu

Functional requiremnts for table level entry from webui in crm 7.0

Similar Messages

Maybe you are looking for