Fusion drive solution to activate Office for Mac 2011
Activating Office 2011 is a known issue for Fusion Drive Macs.
Activation is tied to the drive. According to Microsoft the solid state part of the Fusion Drive generates a new disk id every time the Mac is started. So Mac Office thinks it a new system at each startup and will require activation.
This solution was suggested by Microsoft Support. Please let us know if this works for you.
Follow the steps below to remove the “Thunderbolt bridge”:
1. Click on the Apple icon and click on “System Preferences”
2. Click on “Network”
3. Look for “Thunderbolt Bridge” on the left side.
4. Highlight the Bridge and click on the “-” sign to remove it.
5. Restart the computer and enter the Product key for Microsoft Office. Restart again.
You can also leave comments here:
Fusion drive solution to activate Office for Mac 2011
I don't normally advocate users re-install Office to fix an issue but in your case I think it's worth a try. The Mavericks update seems to have fixed the issue for most users. I would suggest the complete removal rather than the simple removal of dragging the Office folder in Applications to the trash.
Office for Mac 2011: Remove Office
http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/
Similar Messages
-
Microsoft Office for Mac 2011 14.4.2 Update fix for fusion drives
Improves activation in Office for Mac 2011
This update fixes an issue in which product activation is always required after you restart a computer that uses an Apple Fusion Drive. After you install this update, product activation may be requested one more time.
http://support.microsoft.com/kb/2970766I don't normally advocate users re-install Office to fix an issue but in your case I think it's worth a try. The Mavericks update seems to have fixed the issue for most users. I would suggest the complete removal rather than the simple removal of dragging the Office folder in Applications to the trash.
Office for Mac 2011: Remove Office
http://www.officeformachelp.com/2012/12/office-for-mac-2011-remove-office/ -
Desktop software for MAC issue with office for Mac 2011
Hello,
I am trying to sync my contacts and calendar from Office for Mac 2011 to a BB Curve 9300, but it will not sync any data. Does desktop manager for mac only work with entourage an iCal?Hey Tony_Astars,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to setup synchronization with Microsoft Outlook 2011: www.blackberry.com/btsc/KB19148
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
Problems with Office for Mac 2011 installation
I'm trying to install Office for Mac 2011 on my new (bought yesterday) Macbook Air
I entered my pin for the Office into the site and got my download link
I started to download it and it said it would take over 4 hours and when the download got to halfway (of 1GB) the installation stopped and the message given was 'You do not have permission to access the requested file' and this came up every time I tried to restart it
I decided to re-install the program but was met with the same issue..
Can anybody offer any advice or explanation for this it would be greatly appreciated!You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
Since yesterday all my usual .xls files will not open (Office for Mac 2011). CAN open .xlxs files. Default 'open with' is Microsoft Excel.app. No software updates done yesterday or the day before (or maybe a Silverlight or an Acrobat one by accident?). Have repaired disc permissions. HHD name is still same as it always was. What next? Thanks
PS I'm not a great techie so assume I don't know what you're talking about!You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
Retina display - blurry office for mac 2011 and web pages?
Hi everyone,
I was planning on making a trip to my uni tomorrow to make the purchase of the macbook pro 13 inch 8GB RAM and 256 GB SSD (for student discount) but while doing some final research I came across several disadvantages of the RD.
For the next 3 months, the macbook will be used for report/thesis writing which means ill be using office for mac 2011 and adobe reader heavily as well as the internet. I have read many articles saying office for mac 2011 even after applying the update is still blurry and grainy as are the majority of web pages and this has put me off buying and made me think id be better off with the non retina display model, meaning I'd save £200 too.
Can anyone offer any advice on this and confirm whether or not this is true, and whether you would recommend going ahead with the purchase? A screenshot of office for mac 2011 on a retina display would be perfect
Thanks!I agree with BobTheFisterman. I have Pages 5, Pages '09 and Office for Mac 2011. I really like the Pages programs - each of the versions in their own way - but I don't like using Word on Office for Mac. It's not the same as Office 10 when used on a Windows machine. Not close at all in fact. I use it because I have it, and emailing documents between my Mac and work where we use Windows makes it easy. "Easy" is not the same as liking the software though.
The point of this, is that I would not recommend buying it. I've heard that Open Office and Libre Office are very credible alternatives, and work very much like Word on Windows. Both are free and get very good reviews. I've not used either so can't speak from personal experience, but what I would say after buying Office for Mac is that I wish I had tried the free alternatives first.
The other alternative to consider of course of Google Drive. I use that for non-confidential documents, but I wouldn't trust it for storage of any confidential work related stuff. -
I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.
Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false -
I upgraded to Yosemite now my office for mac 2011 will not work
HELP!!!! Everything was fine until I upgraded. I really need my office products and I realy dont feel like buying a new laptop (although, I guess I *could* use one )
My specs:
Late 2010 MacBook Air (13") - 2.13 GHz Intel Core 2 Duo
Here is the error log:
Process:
Microsoft Excel [800]
Path:
/Applications/Microsoft Office 2011/Microsoft Excel.app/Contents/MacOS/Microsoft Excel
Identifier:
com.microsoft.Excel
Version:
Build Info:
Unknown-141003~0
Code Type:
X86 (Native)
Parent Process:
??? [1]
Responsible:
Microsoft Excel [800]
User ID:
501
Date/Time:
2014-11-02 12:06:46.841 -0500
OS Version:
Mac OS X 10.10 (14A389)
Report Version:
11
Anonymous UUID:
8A55B2C7-7F03-CE6B-81C2-E5DC23FD3726
Time Awake Since Boot: 2400 seconds
Crashed Thread:
0
Exception Type:
EXC_BREAKPOINT (SIGTRAP)
Exception Codes:
0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @rpath/OfficeWindowLocalizer.framework/Versions/14/OfficeWindowLocalizer
Referenced from: /Applications/Microsoft Office 2011/Microsoft Excel.app/Contents/MacOS/Microsoft Excel
Reason: Incompatible library version: Microsoft Excel requires version 14.0.50 or later, but OfficeWindowLocalizer provides version 14.0.40
Binary Images:
0x8fe78000 - 0x8feabe03 dyld (353.2.1) <EBFF7998-58E8-32F5-BF0D-9690278EC792> /usr/lib/dyld
Model: MacBookAir3,2, BootROM MBA31.0061.B07, 2 processors, Intel Core 2 Duo, 2.13 GHz, 4 GB, SMC 1.66f61
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D5946382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D5946382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD1), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD TS256C, 251 GB
USB Device: iPhone
USB Device: FaceTime Camera (Built-in)
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:Here is a very easy possible solution, worth trying before uninstalling Office. It worked for us so hopefully might work for you.
We installed Yosemite on a test machine to check for problems. Office 2011 for Mac ran and still does run fine on that machine with Yosemite.
As a result we installed Yosemite on our main machines. At the same time we updated Office for Mac 2011 using the latest update 14.4.7. It was at this point that Office started crashing every time a document was opened.
Solution that worked for us.
1 Using Font Book (comes with your Mac) we removed all duplicate fonts. We selected the automatically remove option.
2 Restart computer.
3 Shut down computer.
4 Restart computer in 'safe boot' to do this:
a) Shut down the computer.
b) Press the power button.
c) Immediately after hearing start-up tone, hold down SHIFT key.
d) Release SHIFT key after Apple logo and progress indicator appears.
e) Once computer has opened, restart the computer without holding down any keys.
5 Hopefully all should be ok now. Your machine might run a little slow for a while as it rebuilds caches etc but all ours were back at full speed after a few minutes.
Best Wishes
Bob -
I am trying to install office for mac 2011 on my new imac which I have already installed parallels and windows 7. On inserting the office dvd the computer defaults to windows. Parallels support suggested disabling the dvd drive in parallels. I have tried this but still the computer wants to open the exe file with windows. Any ideas please?
You may need to ask in the Office:Mac forums on the MS site here:
Office for Mac forums -
Trouble importing .pst file from outlook 2010 to office for mac 2011
Hi !!.. have a probem.. maybe u could help I would be so grateful...
At work I am using windows 7 microsoft office 2010 fully updated,,
I export a folder of my sent e mails to the desktop,, then copy to flash drive...
I take the flashdrive and put it in my mac..copy pst (and subfolders) to mac desktop..
then I open office for mac 2011(fully updated) and import the .pst file from the desk top..
all folders show up and open but not e-mail content!!
how can I get my e mails from work to my mac.. why am I not seeing the e-mails..the file that copies over is around 33 mb ( 188 emails) so I know there is something there..I am only importing my e-mails.. no other info) I even create a sub folder and move
everything to the subfolder before I copy it..
can you help me??
thansk so much !!Hi there,
Can you import the PST file and find the sent items in another Outlook for Windows? If the issue only occurs in Outlook for MAC, I'd suggest you pose the question in the forums below:
Office for MAC
http://www.microsoft.com/mac/support
Support for Microsoft Office for Mac 2011 and 2008
http://support.microsoft.com/gp/cp_macoffice2008_master
How to obtain support for Microsoft Outlook for Mac 2011 connectivity problems with Exchange Server
http://support.microsoft.com/kb/2353366
Your understanding would be appreciated.
Fiona Liao
TechNet Community Support -
Hi. After so many hassles every time I export my Pages documents to Word (especially using Pages 5 and especially with the footnoting), I've finally realized I need to get Office for Mac. Until I try it, I don't know if I'll be writing in Pages, exporting and then checking the document in Windows for Mac, or if I like Windows for Mac enough that I'll write directly in that program. What I would like to know is this: are there any issues with Pages '09 (OK, AND Pages 5) and compatibility with this Windows program. And when the document looks right in Windows for Mac can I be absolutely certain that it will be right when opened on a PC?
I'd appreciate someone's thoughts on this.
The reason I ask especially about Pages '09 and Windows for Mac 2011 is that the Windows is obviously a later program: is the older Mac program OK with it?
Thank you for your advice.I agree with BobTheFisterman. I have Pages 5, Pages '09 and Office for Mac 2011. I really like the Pages programs - each of the versions in their own way - but I don't like using Word on Office for Mac. It's not the same as Office 10 when used on a Windows machine. Not close at all in fact. I use it because I have it, and emailing documents between my Mac and work where we use Windows makes it easy. "Easy" is not the same as liking the software though.
The point of this, is that I would not recommend buying it. I've heard that Open Office and Libre Office are very credible alternatives, and work very much like Word on Windows. Both are free and get very good reviews. I've not used either so can't speak from personal experience, but what I would say after buying Office for Mac is that I wish I had tried the free alternatives first.
The other alternative to consider of course of Google Drive. I use that for non-confidential documents, but I wouldn't trust it for storage of any confidential work related stuff. -
Repeated Office for Mac 2011 activation required...(?)
New MacBook Pro with Office for Mac 2011 installed from my MSDN account. Everything with latest updates. Activation of the Office suite works fine.
However, I'm forced to re-activate Office after every restart of the machine. Activation should be required only once. Anyone have any suggestions re how to get the activation state to be retained? (...and why it wouldn't be retained?) Thanks.Probably best to ask in the Office for Mac forums.
-
TS1541 microsoft office for mac 2011 will not install.
Purchased office for Mac 2011 from store. Each time I put install CD in my Mac, it just ejects it. What am I doing wrong? This is my first Mac.
Check the dvd for scratches.
See if any other dvds work. Perhaps the drive is defective.
Try smc and pram reset. -
Microsoft Office for Mac 2011 no longer syncs contacts and calendars through iTunes after upgrading to Yosemite. It worked fine until I made the mistake of upgrading. Help!?
Please describe the problem in as much relevant detail as possible. The "etrecheck" fad hasn't made that step any less necessary. The usual results of posting etrecheck output on this site without a full description of the problem are very poor.
The many "failed" or "killed" warnings that etrecheck sometimes spews are not a reason to reinstall the OS.
The better your description of the problem, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
How do I sync from ical and address book to office for mac 2011
How do I sync from ical and address book to office for mac 2011 in outlook? icloud is turned on, sync is turned on in outlook and in itunes. Email working fine in outlook, but no contact or calendar information. Microsoft said it is an Apple issue. They said icloud is not compatible with Outlook. I have OS Lion if you need to know that.
See Here
https://discussions.apple.com/message/16982951#16982951
Maybe you are looking for
-
Office 2013 "Help" -- What Executables Does it Call?
The help function in Office 2013 applications running under 64-bit Windows 7 Professional SP1 is blocked by my Software Restriction Policy (e.g.,.http://www.mechbgon.com/srp/). Neither clicking "?" in the upper right of the application window nor pr
-
Posting PO for Direct delivery
Hello, The activity of my company is trading, and I make a sales flow with direct delivery to custmer and thus the stock does not pass in transit by my company. I need to have a posting document with : account of purchase (Transaction EIN) in account
-
How to collapse a folder in the project bin?
Hi there. I'm trying to figure out how to collapse/expand a folder in the project bin. I whipped up a AEGP that listens and reports any/all command IDs, but when I collapse/expand the folder, I'm not getting any command ids. I've noticed there are ma
-
I miss having my double click feature. I used that to go right to my favorites to make a phone call. Now I have to take extra steps to get there. Any idea on how else to make short cuts for certain things? Wish the triple tap function would allow you
-
How to delete sparse bundle on TC?
I ran out of room on my 1TB TC, so got a new 3TB TC and have set it up for Time Machine. I want to delete all files on the 1TB TC and use it only as an auxiliary hard drive. I can't seem to delete the Sparse Bundle file. How do I delete the sparse