G/L account not extended to Company Code

Hi Friends,
We have a program in SAP that creates G/L accounts from a file.
In one scenario, the G/L account was not created with the error "G/L account yy is not extended to xx Company Code".
Could you please help me understand the possible cause of this error.
Thanks..

the job failed?
It could be the GL record was being processed at the sametime as the program was running so the record was locked.
Do you get a batch job in SM35?
You can normally view errors here.
Can you create it manually?
If not, it means the GL account has not been created in the CoA linked to the Company Code, so the GL account can be extended as it does not exist.

Similar Messages

  • PO created instead posting block set & vendor not extended to company code!

    Dear friends,
    I have a vendor created for a purchasing organisation in  a company code. there are two problems that i am facing.
    1) I have  blocked  a particular vendor completely. Even then system is allowing to create the PO using this vendor.
    2) This vendor has been created for a particular company code & has not been extended to another company code. Even then it is allowing to create the PO using the vendor centrally blocked for creating purchase order in another company code.
    There is a service PR specifying this vendor as desired vendor & the vendor is ticked for auto PO. Could this be a problem? but i think even then it should not allow to create PO that too for a different company code.
    Thanks & Regards
    Tasleem Arif

    1) I have blocked a particular vendor completely. Even then system is allowing to create the PO using this vendor.
    Answer:  While creation Purchase order, purchase orgnization mandatory for vendor,  if vendor blocked at company code level means system will not check Company code at the time of PO creation. here in PO creation use of company code is to recognise Currency of the company code.
    2) This vendor has been created for a particular company code & has not been extended to another company code. Even then it is allowing to create the PO using the vendor centrally blocked for creating purchase order in another company code.
    Answer: While creation of Purchase order, Comapny code is used for only currency recognisation , system will not check vendor is created for comapny code or not? but vendor should at Purchase org level.
    If vendor is not defined at company code , then it will give an error at the time of invoice only. not at PO level.
    At  PO level Purchase orgnisation is very important
    Regards
    Mahesh Naik.

  • Account not exit in company code`

    H

    Sorry
    copy chart of account    assign company code  everything  done
    when go to the  FS00  give company code enter it pop company name  and when go to A ll GL accounts   pick one GL Account    we try to display it  but giving error
    like    account xxx doesnt exit in company code xxx  what we assign chart of accounts
    what would be the reason where we have to check  plz  i check all enterprise settings
    its display all gl accounts of particular company code  when we pic and make dispaly its giving error
    plz  anybody help me
    Thanks
    MvNr

  • G/L account is not defined in company code

    Hello,
    When I try to release an invoice in accounting, there is an error "G/L account is not defined in company code ".
    Does anyone knows the possible cause of these error?
    Thanks

    Hi,
    Go to VKOA , Check whether you have assigned the correct G/L account or not .
    Secondly if it is correct go to FS00 and extend the G/L Account.
    For this you can take the help of FI consultant or ask him to create it . Once this is done than go to VFX3 and release the document for accounting.
    Hope this will help you !!
    Regards,,
    Krishna O

  • G/L account 379998 does not exist in company code ****

    Hello Everybody!
    My very 1st post in this forum.....
    I`ve posted this same query in MM forum as I work in MM... I havnt got a solution there! As its FICO related I`m posting it here in this forum. At present we don hav a FICO consultant. So... please help guyz!
    I get a error Sayin `G/L account 379998 does not exist in company code ****`.
    It happens while I try posting a created PO(purchase order) using T-code MIGO. The error msg no. is M7055.
    I`ve also checked FS00 for this G/L acc no.... Its NOT AVAILABLE in my Company Code!
    I hav tried copyin thru OBY2... it says `Copying is not possible due to existing entries in the target co.cde`!
    Help find a way through this!!!
    Thanks!

    Hi Jason.
    ARe you creating a GR/IR account, then these are the below which you shud
    give
    Type
    Account group - Liab acc (As it is a liab select the radio button B/S)
    Control data
    Give acc currency, and tick only balances in loc curr
    tax category - give the one which u wnat to input or give * which accepts any tax cat
    Check the open item and line item checkbox
    give sort key as vendor number
    field status group - goods/invoice received clearing acc
    and tikc the checkbox post automatically only. This account there should not be manual entries
    hope this helps
    please assign points if helpful
    regards,
    radhika

  • G/L account 58013000 does not exist in company code SMSL Hitch

    Sap FICO Experts,
                               I have a problem in MB1C Transaction. If I entered the Material
                               Number the following Error have come.
                               <u> <b>G/L account 58013000 does not exist in company code SMSL
    </b></u>
                               Kindly tell me, What I have to do for further Process.

    Hi,,
    Create the missing GL account 58013000 in Company code SMSL.You can use T.code FS00/FSP1.
    Regards
    Aravind

  • G/L account 891000 does not exist in company code

    Dear Gurus,
    im facing a error while posting Goods(Subcontracting )
    i used Tcode FS01 to create G/L account
    since i dont know what are the important data to be entered in creating 891000 G/L account by using Tcode FS01
    pls help me
    Thanks
    Error is.....
    <b>G/L account 891000 does not exist in company code
    Message no. M7055
    Diagnosis
    The G/L account has not been created in the company code in which you are working.
    Procedure
    If the system has determined the G/L account, the system setting is faulty. Contact your systems administrator.
    If you have entered the G/L account or the company code yourself, check the account number entered, as well as the company code in which you are working.
    G/L acct. CoCode
    wrong right Correct the G/L account.
    right wrong Correct the company code.
    right right The G/L account must be created
    for the company code. </b>

    Hi Kamal,
    Created account using Tcode FS01
    i entered all mandatory fields
    then i tried to save it was asking to fill the field <b> Field Status Group</b> in the tab <b>Create/Bank/Interest</b> then i gave G045>>>which is for <b>Goods/invoice received clearing accounts</b>
    now the error is solver and im able to post goods...what i've doubt is... im not sure whether i gave correct <b>Field Status Group</b>
    pls clarify me........
    Thanks

  • G/L account does not exist in company code

    Hi,
    When posting a GR (movement type 101) via MIGO one of my users ran into above error message:
    G/L account 300000 does not exist in company code PFNA.
    I first checked the material valuation and found out that it was incorrect.
    After the material valuation in the master data was adjusted, I executed MIGO again, but I still end up with the same error message: G/L account 300000 does not exist in company code PFNA.
    Tried to add a line to the PO, even created a new PO for the same material / plant: same result.
    Did the simulation in OMWB for material / plant combination:
    - old valuation class: 300000
    - new valuation class: 340000
    Also in OBYC same GL accounts are related to BSX. Another GL account 440000 can be found in WRX (but is of no impact here).
    So it seems like although material master was updated, still the old valuation class is getting called to determine the account.
    Anyone any ideas?
    Thanks in advance!
    Geert

    Hi Amol,
    Thanks again for your input!
    Meanwhile I have received the material via MB1A movement type 202 and put the PO item on Delivery Completed.
    This was really a system bug as I had another PO and material (100% same situation including error message) for which the MIGO worked after the valuation class got changed in the material master.
    Thanks a lot for your help!
    Regards,
    Geert

  • Extending to company codes using FSS0

    Hey,
    I do understand that there are many ways to extend a gl account to one or more company codes, but for my client, i need to use only FSS0 transaction to extend the company code. Can anyone guide me in doing so?
    Thanks,
    Aniket

    Hi:
           You are saying that your COA is 0050 and you have created a GL account 777222  in co code 0001 . The error you are mentioning is no Account groups have been created in COA OMB1 which contradicts from your statement that you are using COA 0050 and now in your post error message depicts that account groups have not been created in COA OMB1 please be clear on one point where you want to create GL . If you want to create GL in OMB1 then you will have to create account groups for this COA in OBD4 otherwise simply use 0050 COA in FSS0 to extend GL account to 0002.
    Hope this answers your question.
    Regards

  • Using Same Bank Account for two different company code

    Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
    Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

    The system will allow the same ABA and bank account on two different company codes.  However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes.  The EBS program uses the house bank/account ID tables to assign a company code to the bank statement.  If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
    Regards,
    Shannon

  • Tax code does not exist in company code Error in FBCJ

    Dear Sir,
    I want to post a document using business transaction Expenses in Cash Book.
    In this case entry will be posted to the GL account which are tax relevant.
    Necessary configuration for Business Transactions in FBCJ2 have been done.
    even The Tax code is assigned to Company code in MM (SM30 > J_1ICONDTAX)
    It is observed that the transection calculates Tax and geting saved (The indecator becomes Yellow)
    But at the time of posting entry to FBCJ Cash Book System throws error
    "Tax code ZM does not exist in company code 1000"
    I am using the same tax code namely "ZM" in other transactions such as F-02
    where it is working fine and does not throw any error.
    Please take me to step by step configuration if the same needs to be configured @ FV12
    Regards & Thanks in anticipation
    Chirag Shah

    Dear Sir,
    I have checked @ FV12 and found that the condition record is already exist with the Key combination of the referred tax code namely ZM.
    But i could not find how to check the WEF date.
    Even I tried Creating new condition record through FV11 but even there i could not find how do I create a condition WEF 1.4.2011 (The first date of Fiscal Year)
    Kindly Guide
    Regards & Thanks in anticipation
    Chirag Shah

  • Assign chart of account to a new company code

    Dear all,
    I have created a new company code in system(copy an existing company code data). When I am going to a new chart of account to the new company code, system display an error message as follows:
    Reset company code data before changing the chart of accounts
    Message no. FC140
    Diagnosis
    You have selected a different chart of accounts for a company code.
    You must, however, reset the company code-specific data for the old chart of accounts beforehand.
    Procedure
    If you really want to allocate a different chart of accounts to the company code, first of all reset
    the company-code specific data for the old chart of accounts.
    First of all you must, if it exists, reset the transaction data for this company code.
    Finally, carry out the resetting of the company code-dependent G/L account master data
    (without the general master data).
    Note:
    When dealing with large quantities of data, resetting the master data or transaction data can be very
    time-consuming. In this case, it is advisable to schedule the running of these reports as a batch run.
    Do anyone know how to solve this problem?
    Thanks
    Chris

    Hi Chris,
    I think you have copied the co. code using Trcode , When you have copied the co code all the gl master records from the source co code is also coiped to to the target company code. these gl masters use the COA(Chart of accounts)  used by the source co. code.
    If you want to assigna new COA now to the target co code then you have to delete all the gl accounts from this new co code you can do this by executing TR Code OBR2. Select the gl accounts, Select the check box for "with general master data" and provide the company code and execute. Now you can assign a new COA to this new company code
    Regards
    Pratiksha
    *assign points if useful

  • Vendor X in  not defined in Company code  Y

    Hi Guys,
    I did the setting in OBYA (intercompany settings) for the two company codes X and Y. However, when I am psoting the doc by FB01 getting the error
    "Vendor X in  not defined in Company code  Y". In OBYA, it show the setting.
    thnks

    hi,
    getting this error. What to do
    Consolidated companies 64 and 000065 are different
    Message no. F5080
    Diagnosis
    The number of the affiliated company must be clear for the selected document type for all line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
    Procedure
    If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account.

  • Screen layout is not defined for company code ZVVV

    Hi
    I am creating CUSTOMER MASTER in XD01
    I am getting an error like "Screen layout is not defined for company code ZVVV"
    Can any one help?

    hi,
    this is to inform you that,
    check whether
    in SPRO - fin Accounting New - accounts receivable and accounts payable - customer accounts - master data - preparations for creating master data - Define Screen Layout per Company Code (Customers)
    please check whether is *  = Default field status.
    please check and update.
    balajia

  • Credit control area CCAJ not permitted for company code

    Hi All,
    We have One company code, under that we have two credit Control Areas.
    In the Config settings, we have maintained for (Assining the compnay code to Credit Control Area) to one CCA.
    Now, it is while creating the Invoice for another CCA. It is throwing the below error.
    Credit control area CCAJ not permitted for company code 1301
    Message no. F4746
    Please guide.
    Regards
    Vinay

    Hi
    Check whether u have maintained the combination in SPRO-Financial Accounting-A/c Rec and Pay-Credit Mgmt-Assign permitted Credit control areas to company code.
    regards
    vamsi Javaji

Maybe you are looking for