Extending to company codes using FSS0

Hey,
I do understand that there are many ways to extend a gl account to one or more company codes, but for my client, i need to use only FSS0 transaction to extend the company code. Can anyone guide me in doing so?
Thanks,
Aniket

Hi:
       You are saying that your COA is 0050 and you have created a GL account 777222  in co code 0001 . The error you are mentioning is no Account groups have been created in COA OMB1 which contradicts from your statement that you are using COA 0050 and now in your post error message depicts that account groups have not been created in COA OMB1 please be clear on one point where you want to create GL . If you want to create GL in OMB1 then you will have to create account groups for this COA in OBD4 otherwise simply use 0050 COA in FSS0 to extend GL account to 0002.
Hope this answers your question.
Regards

Similar Messages

  • Creation of New company code using EC01

    Hi
    While creating a new company code using EC01, I am getting several messages relating to Number ranges. All the message relate to number range object type 5 & 6. After all these messages, the final message says that 86 number ranges have not been copied. Can some one throw some light on this?
    Regards
    Ravi

    Hi,
    You can ignore these messages; if you use EC01 the system copies all possible tables that are registered as company-dependent. Some of these tables might be not in use at all.
    Regards,
    Eli

  • Which table stores VAT number entered for a company code using T Code oby6?

    Hi
    Which table stores VAT number entered for a company code using T Code oby6?
    please advice.
    Thanks,
    Vaishnavi

    T001

  • Can We Two Different Credit Control Area to 1 company code using cross comp

    Can We Two Different Credit Control Area to 1 company code using cross company code assignment.Tried but giving error at the time of bill release.Experts Can you help?

    Hi,
    It is not possible to have more than one credit  control are for a single company code.

  • Timewrite across company codes using SAP CATS.

    Hi Experts,
    Want to know please, Can we timewrite across company codes using SAP CATS.
    Thanks,
    Muhammad

    Hello,
    You surely can.
    When the employee enter his time there will be the respective field to identify the cost center or the one you want to assign.
    If you are using the Worklist, bear in mind to correctly have those codes assigned and I would mention to filter the worklist via CATS0001 user-exit to show only the correct ones (which are relevant for that employee).
    Regards,
    Bentow.

  • How to find company code using sales doc. No

    Hi,
         I need to print company code, how to find company code using sales doc no. I don't find it VBAK.
    Cheers
    Senthil

    Dear Senthil
    You can find in table VBAK itself - Field BUKRS_VF
    thanks
    G. Lakshmipathi

  • PO created instead posting block set & vendor not extended to company code!

    Dear friends,
    I have a vendor created for a purchasing organisation in  a company code. there are two problems that i am facing.
    1) I have  blocked  a particular vendor completely. Even then system is allowing to create the PO using this vendor.
    2) This vendor has been created for a particular company code & has not been extended to another company code. Even then it is allowing to create the PO using the vendor centrally blocked for creating purchase order in another company code.
    There is a service PR specifying this vendor as desired vendor & the vendor is ticked for auto PO. Could this be a problem? but i think even then it should not allow to create PO that too for a different company code.
    Thanks & Regards
    Tasleem Arif

    1) I have blocked a particular vendor completely. Even then system is allowing to create the PO using this vendor.
    Answer:  While creation Purchase order, purchase orgnization mandatory for vendor,  if vendor blocked at company code level means system will not check Company code at the time of PO creation. here in PO creation use of company code is to recognise Currency of the company code.
    2) This vendor has been created for a particular company code & has not been extended to another company code. Even then it is allowing to create the PO using the vendor centrally blocked for creating purchase order in another company code.
    Answer: While creation of Purchase order, Comapny code is used for only currency recognisation , system will not check vendor is created for comapny code or not? but vendor should at Purchase org level.
    If vendor is not defined at company code , then it will give an error at the time of invoice only. not at PO level.
    At  PO level Purchase orgnisation is very important
    Regards
    Mahesh Naik.

  • G/L account not extended to Company Code

    Hi Friends,
    We have a program in SAP that creates G/L accounts from a file.
    In one scenario, the G/L account was not created with the error "G/L account yy is not extended to xx Company Code".
    Could you please help me understand the possible cause of this error.
    Thanks..

    the job failed?
    It could be the GL record was being processed at the sametime as the program was running so the record was locked.
    Do you get a batch job in SM35?
    You can normally view errors here.
    Can you create it manually?
    If not, it means the GL account has not been created in the CoA linked to the Company Code, so the GL account can be extended as it does not exist.

  • Two company codes using different chart of accounts

    Dear SAP FI-CO guru's
    There are 2 company code both are using different chart of accounts how we can make consolidation reports  for both  the company codes ?
    thanks in advance
    Regards
    Guru Prasad

    HI,
       use group chart of accounts.
       Create a group chart of accounts
      Give the group chart of accounts no for both the chart of accounts  in OB13
    give the group account number while creating gl account.

  • Cross company code use of equipments

    Hello gurus,
    in our system we have equipment masters for all our machines relevant for maintenance. Up to now, all maintenance operations for the equipments have been documented in PM-notifications and orders.
    Now, our company incorporated a subsidiary company to outsource all the maintenance work.
    This new company has its own company code in our SAP system (lets say 2000) and will act as a contractor for the mother company (company code 1000). Now, we would like to use our existing equipments to create PM- or Customer service orders in company code 2000.
    I have heard rumours that this can be done, but up to now, nobody could explain to me how. If there is no way to do this we would have to create copies for our equipments in company code 2000 and figure out how to document the maintenance in company code 1000.
    Any ideas?
    Cheers
    Alicia

    hi
    From my knowledge , you can create the order in different planning plant ,but every time you have specify the planning plant while creating the order. in this way the cost will be captured at the 2000 company code.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/5b/ae2ea34b8611d182ba0000e829fbfe/content.htm
    also you can create separate work center for that plant do the billing according to the job performed
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/05/e2eb106f0a11d2a5aa0060087a7a74/content.htm
    Regards
    Thyagarajan

  • How to get company code using material number

    Dear all,
              I have material number & plant on selection screen, but how do I get the company code details using MARA-MATNR ?

    HI,
    You can use a cmobination of T001K and MARC Table.
    T001K table is assignment of Plants to a company code and MARC is a table with combination of Material and Plant.
    Regds,
    Anil
    Edited by: Anil Katoch on Jul 23, 2009 6:24 AM

  • Creating General loans taken in Company Code using Loan Management

    Hello Gurus,
    I have been trying to find a way to create the configuration for loans taken using the SAP Loans Management module. I still haven't managed to see any configuration guide on the topic. Can someone please help me out with insight on how to go about the configuration for loans taken. I will also need the user guide on how to create loan taken in the SAP system.
    Regards,
    Chuka

    Hello Shannon,
    Good to hear that at least there is hope. Secondly, I was wondering if I could find a configuration guide to help in the configuration. This will get me a head start at least so I can be specific on the issues to resolve with the Loans Management expert. Any help or links towards this will be very much appreciated.
    Cheers,
    Chuka

  • Extend vendor to different company code

    Hi All,
    We are trying to find an Enterprise Service that fits the following requirement:
    Expand an existing vendor to a different Company Code.
    We are ok if we need to extend an existing ES to fit the requirement.
    your help will much appreciated
    Thanks.
    Anindita

    Hi,
    XK01, enter same vendor number and enter different company code.
    If you want to extend only company code then use FK01. If you want to extend purchasing level also then use XK01.
    General data will be same.
    Regards,
    Chandra

  • PO creation using ME57, company code is lost

    Hi
    I am creating PO using ME57, but I am loosing company code so I cannot call partner funcation PI.
    But if I creat PO using ME21N, and copy same PR there, then company code is getting copied automatically.
    So I am not understanding why system is "NOT" transfering company code while creating Purchase Order using ME57 for same purchasing requisition.
    Thanks and Regards
    Umesh
    Message was edited by:
            umesh bhosale

    Hi Umesh,
    ME57 transaction code used for Assign and Process. This transaction code will display all open PRs with different company codes.
    To get Company code in your selection criteria, you have to un-tick Company Code while creating your own variants. By default this will be protected and Hidden Std. setting.
    To default your company code, use your Variants or restrict your selection criteria only for your Plants.
    In ME21/ME21N transaction code, organization elements will be entered using Header - Org.Data.
    Bye,
    Muralidhara

  • Withholding tax of vendor in different company code

    Hi All,
    We are facing problem that withholding tax of single vendor is being deducted correctly in one of the company code while in others, it deducts 0 tax.
    Single vendor e.g. 100002 is created in Company Code 112
    The same vendor is extended in Company Code 113, 114 and 115
    The issue is, we have created four different invoices in different company codes. Now we are making payment by selecting four of the invoices through F-58. It deducts the withholding tax in only 112 company code, while in others its calculating wht = 0
    The configuration is such that, withholding tax type '01' is used in vendor master and in all invoices. The minimum limit is set to 0 so there is not any possibility of not exceeding the minimum amount. The other thing is withholding tax is set at country level, and all of our company code belong to same country so no issue of different configuration. We also check if 'Liable' is checked in each vendor master as well as no exemption is given in any period.
    What could be the possibility?
    Warm Regards,
    Nayab

    Thank you Chandra for quick response.
    I checked, everything is perfectly set. I guess there is some issue with extension of same vendor in different company codes as e.g. in new company code, same withholding tax code is applied on vendor's invoice and deducted correctly while for other vendor it is not.
    Is there any thing related to vendor master?
    PS: Can we check through some report if withholding tax amount on some particular vendor is exceeded with its minimum withholding tax amount, set in IMG?

Maybe you are looking for