G400s gaming issues and auto shutdown

i bought the G400s since the vendor told its great for work as well as gaming but whenever i play high graphic online games like League of Legends or Assassin's Creed brotherhood, it always says driver IRQL not less or equal. Can someone please help me to solve this issue since i have only 1 week holidays left for gaming!
and by the ways its not always driver irql. there are times when it says different stuff and the computer needs to shutdown.
looking forward for help

If your XBOX is wired or Wireless to the Router?
If your XBOX are wireless then login to the router setup page and change the Wireless Channel on your Router to 1 or 11, and then under the Advance Wireless Settings tab change the Beacon Interval to 50 >>Change the Fragmentation Threshold to 2201 Change the RTS Threshold to 2202 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

Gaming issues and heat issues, running windows 8.1 pro via bootcamp

I have a few problems, and I don't know what else to do, then to write for help here..
I really hope someone out there can help me, because I have had this problem since I bought my laptop mid 2012, and I got smarter since then, so now I know that I actually shouldn't have these problems, it's not because my very expensive laptop is bad, or that it is a laptop or because it's a mac, regardless of what people say, I'm positively certain that it's a problem which shouldn't be there.
I have pretty great specs, (trust me i checked them out, not the best in the world, but pretty good) yet I can't enjoy 1 single mmorpg game like, Tera, or the new Archeage (currently in open beta), or any other game, (swordsman online)... Even though people say Tera has bad coding, I have tried adjusting things for weeks if not months, NOTHING helps, i get a frame rate that is from 0-25 very unstable, usually around 7-12, and sure if I go the lowest settings in the games I can get very unstable framerates but i guess they can get up to around 35-72 but drops to like 7 or 3 sometimes as well, so even on the LOWEST settings in the games I can't enjoy the games fully... It lags and such because of the low fps ofc...
Other than that it also have a heat issue, mostly when running windows 8.1 in bootcamp.
It get's quite hot, just by opening a browser window, and yes i have tried reseting smc, and p-rams, many times.. nothing seems to help.
And even if it helped the heat problem, the gaming problem is still there.
Now to my specs: (I have the macbook pro retina, mid 2012, 15 inch)
- Prosseser: 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 6MB shared L3 cache. "Core i7" processor (3720QM)
- Memory: 16GB 1600MHz DDR3L onboard memory
- Storage: 256GB ssd flash storage. (Seperated into os x = 130GB, windows 8.1 pro = 120GB) Running games and such from my 1TB external harddisk.
- Graphics and video support:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors.
And here's a link to see what is inside it for yourself: http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- i7-2.6-15-mid-2012-retina-display-specs.html
When that is said, apple's warranty has run out, and I didn't buy apple care, but I still have warranty from the store (humac) I bought it in, because in my country the law is warranty 2 years, no matter what, but if i can avoid it, I REALLY would like to avoid switching it out with a new one, since there could be problems all over again, and I would lose what I have on it right now, plus it's a hassle to get a new one, they will always try and fix it for a long long time before they give a new one, and probably can't find the problem...
But if that's the only thing i can do about it, I will ofc, but just don't advise me to do that, unless there's no other solution to the problems.
Please help me.
ps: sorry if I posted it the wrong place, I wasn't allowed to post it the right place by apple...

If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
Rudegar ... I think the Windows installer did not see any hardware, otherwise there should be HW with yellow triangles with exclamation marks.

Autostart and auto shutdown

i went to system preference-energy saver to set the time but it doesnt auto start nor auto shut down to the time that i set. it basically doesnt work anymore. pls advice.
the settings used to work but now it doesnt. did anything go wrong in my powerbook?

Hi Cayenn,
after you installed clusterware, clusterware will take care of your whole stack.
You actually don't have to do anything. If you shutdown a server and start it up again, clusterware will restart everything for you.
So there is no need to do a "clean" shutdown, and no need for a startup.
However if you want to stop it manually:
crsctl stop cluster -n <node>
You can also stop the local ohasd deamon via.
crsctl stop crs
But this is totally unnecessary.
If you want to disable autostart of the cluster then you need to disable it:
crsctl disable crs
crsctl enable crs
Then you have to start the stack with crsctl start crs.
All other things will get started as they wore before...
There is only one thing, which you might want to stop "immediate" and that is the database instance on a server.
srvctl stop instance ... -o immediate
However stopping a database instance has the drawback, that clusterware remembers the state that it was down and will not automatically start it up again.
So better just shutdown your server ;)
Sebastian

Strange graphical issues and system shutdowns

Hi, glad I can type this message before my computer crashes...it's an early 2011 MBP with a dual SSD/HDD (optical drive removed) in installed myself but have had no issues for years. Until today.
I've been having a very strange problem lately that seems to have occurred spontaneously. Basically, sometimes the machine will just freeze mid process, leaving the screen still (might be able to move the mouse around). Other times, the screen will go completely white. In other cases, the left half the screen will be split and will be rendered on the right half, and the right half will be split and rendered on the left. If I plug a monitor in, it will sometimes crash or it even strobed for a while. In each of these cases, I have to hold the power button to reset the computer. And then after this, sometimes it won't boot and I have to repeat power off and on.
This problem also occurs on the windows bootcamp side. Same rendering issue, pictured below.
If it sound like I'm saying "sometimes" a lot, it's because it's hard to predict what's causing it. Seems very spontaneous. But I think it might be a graphics card overheating issue, although I did just play 2 hours of a detailed first person shooter and it wasn't a problem.
I did upgrade my RAM a few weeks back, but it's not the issue because I tried reinstalling the old pair and same thing happens. Maybe I fudged something up in that process? But I really didn't touch anything and I;ve done upgrades many times.
Anyone have any thoughts or methods to diagnose? Thanks.

Your MBP may fall into this category:
http://www.apple.com/uk/support/macbookpro-videoissues/
Ciao.

How im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

how im suppose to fix the auto shutdown problem in my iphone 3gs after updating to ios 5.1.1 this problem has made me a mobile ****** in my house and an loser in thing care so if any solution to this problem let me know

What "auto shutdown problem" are you talking about?

My Iphone 3GS auto shutdown and power on

My Iphone 3GS auto shutdown and power on

this is happening to my phone, i changed the battery, i tryed the logic board in another phone and it worked fine, there dosnt seem to be much else in there, still cant get it going.

Photomerge and Auto Align/Blend issues!!! HELP!

I have a lot of photos that I need to create panoramas of, and when I use Photomerge all of the photos that I want to create a panorama of show up on the same image, but are stacked one on top of the other. Not linked or mergedin any way. They all have vector masks, but nothing covered up. When I try to use the Auto Align and Auto Blend modes for a panorama, an error box shows up saying that I don't have enough coverage area of 40%, but I certainly do. They images are very similar, and taken by standing and moving 360 degrees. I don't understand why Photoshop doesn't like these images? But I have to make about 100 panoramas, so any and all help and insight would be greatly appreciated!!!

What OS are you running? 32 bit or 64 bit? How big are your source images and how many do you have for a given pano?
I just did a 360 degree pano that ended up 25689 x 1850 pixels (after cropping) from 17 raw Canon 40D images, all handheld while standing in different spots around the Clingman's Dome observation tower in the Great Smoky Mountains National Park. Photoshop CS5 standard 64 bit on Windows 7 x64 with 8 GB RAM didn't have any problem at all with it, though it took about 10 minutes or so to finish. The result came out astoundingly good, even though the slight changes in perspective should have been challenging.
http://Noel.ProDigitalSoftware.com/temp/ViewFromClingmansDome_NPS.jpg
If you don't mind my asking, what do you do with hundreds of panoramas? It's an difficult image format to find uses for to say the least.
-Noel

Satellite M-500 Auto shutdown

My Satellite M-500 will auto shut-down at most of the time while loading the windows 7.
If I'm lucky, my windows 7 will able to load into desktop but after a while, it's will auto shutdown again.
I've re-format my hard disk and re-install the windows 7 operating system but the problem is still not solved.
But one thing that I now wondering is, I've swap the hard disk to my company laptop, both of the laptop will working well. No auto shut-down any more.
Please advice.
Thank you.

It sounds like it could be a hardware issue.
If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Schedule auto shutdown shows weird info

I have a MBP 13 running 10.6.2. I schedule an auto shutdown everyday at 6am. when i issue command 'pmset -g sched' from terminal, it gives me
--> Scheduled power events:
--> [0] shutdown at 02/24/10 06:00:00 by Repeating
then i close the lid and put MBP to sleep for 30 minutes, now i issue the same command, i have the following...
[255] wake at 12/31/98 15:58:00
[256] wake at 12/31/98 15:58:00
[257] wake at 12/31/98 15:58:00
[258] wake at 12/31/98 15:58:00
[259] wake at 12/31/98 15:58:00
[260] wake at 12/31/98 15:58:00
[261] wake at 12/31/98 15:58:00
[262] wake at 12/31/98 15:58:00
[263] wake at 12/31/98 15:58:00
[264] wake at 12/31/98 15:58:00
[265] wake at 12/31/98 15:58:00
[266] wake at 12/31/98 15:58:00
[267] wake at 12/31/98 15:58:00
[268] wake at 12/31/98 15:58:00
[269] wake at 12/31/98 15:58:00
[270] wake at 12/31/98 15:58:00
[271] wake at 12/31/98 15:58:00
[272] wake at 12/31/98 15:58:00
[273] wake at 12/31/98 15:58:00
[274] wake at 12/31/98 15:58:00
[275] wake at 12/31/98 15:58:00
[276] wake at 12/31/98 15:58:00
[277] wake at 12/31/98 15:58:00
[278] wake at 12/31/98 15:58:00
[279] wake at 12/31/98 15:58:00
[280] wake at 12/31/98 15:58:00
[281] wake at 12/31/98 15:58:00
[282] wake at 12/31/98 15:58:00
[283] wake at 12/31/98 15:58:00
[284] wake at 12/31/98 15:58:00
[285] wake at 12/31/98 15:58:00
[286] wake at 12/31/98 15:58:00
[287] wake at 12/31/98 15:58:00
[288] wake at 12/31/98 15:58:00
[289] wake at 12/31/98 15:58:00
[290] wake at 12/31/98 15:58:00
[291] wake at 12/31/98 15:58:00
[292] wake at 12/31/98 15:58:00
[293] wake at 12/31/98 15:58:00
[294] wake at 12/31/98 15:58:00
[295] wake at 12/31/98 15:58:00
[296] wake at 12/31/98 15:58:00
[297] wake at 12/31/98 15:58:00
[298] wake at 12/31/98 15:58:00
[299] wake at 12/31/98 15:58:00
[300] wake at 12/31/98 15:58:00
[301] wake at 12/31/98 15:58:00
[302] wake at 12/31/98 15:58:00
[303] shutdown at 02/24/10 06:00:00 by Repeating
why am i getting the wake status for 15:58:00? I never select the 'start up or wake' option.
this is very strange. any idea???
Message was edited by: j Robson

Hi All,
Gmatroni it should only need cti enabled but i have tried it with the control groups as well to no avail.he
Also tried deleting and recreating the application user.
Rob,
Yes this was also my thinking.
I forgot to add i have tried upgrading the UCM to 7.0.3 and CUE to 7.0.3 to try and erradicate the problem.
The UCM is now back at 7.0.1 and the CUE at 7.03.
The compatiblity matrix said they should be compatible.
I still believe this is some kind of application/software incompatibility issue.
Maybe you could recommend a sugested patch?
Cheers
Kev

APC UPS won't auto shutdown

I am using an Intel 2Ghz Intel Duo iMac with 10.5.2 and recently purchased an APC UPS Back-UPS ES 350.
The Energy Saver control panel recognizes this device and all seems to work well - however - no matter what I do I can't seem to get it to do an auto shutdown when I remove external power.
I have tried all combinations of settings - even tried the power chute software (then uninstalled). No luck. The thing just sails along until power is all out.
Anyone else having similar problems or know of solutions. I can't seem to find anyone with similar problems.

Hey Matt,
I have the same issue, APC Back-ups 1300 with PowerChute installed. It is recognizes and knows the UPS has swtiched to backup power but never triggers the configured auto shutdown. I've tried both the standard UPS config and the PowerChute config.
I had to get a updated version of PowerChute that "worked" with the Intel processor, made no difference.
Any luck yet?

The Crew –Racing with Your Coolest MSI Gaming Motherboard and Graphics Card

Most gaming fans are crazy about racing games, and there is a new game title just launched to fulfill gamers’ dream. We want to share with you the experience from Taiwan user who assembles a rig with a brand new MSI Z97 Gaming 5 motherboard and 960 graphics card, along with a hardware and game (The Crew) benchmarks. You may find the original article from:
https://forum-tc.msi.com/index.php?topic=113352.0
The Crew - Launch Trailer
PC configuration:
CPU: Intel i5-4670K
RAM: Avexir DDR3-1600 8G*2
VGA: MSI GTX960 GAMING 2G
SSD: Kingston HyberX 3K SSD 240G
CPU Cooler: SilverStone AR01
The MSI Z97 Gaming 5 motherboard box
Overview of the motherboard: Black and Red color scheme, it’s also the favorite color combination from MSI’s user reservation.
The PCI-E slots and bandwidth are enough for a two-way SLI setting.
Killer Ethernet, outstanding performance on internet access, especially reduce the lag issue.
The new arrival MSI GTX960 GAMING 2G graphics card
New cooling design: ZeroFrozr
The dragon symbol on LED panel
With MSI Gaming series motherboard plus graphics card, you can enable a Gaming App to overclock CPU and GPU. There are 3 modes to choose.
6-month free trail of the XSplit game caster software, free bundled with MSI gaming motherboard and graphics card
Done with assembling, quiet nice color combination and clean cable arrangement.
An overview of the very gaming look system.
Some benchmark results before racing with The Crew.
CPU and GPU info on CPU-Z and GPU-Z applications:
3DMark Fire Strike score: 6441
3DMark Fire Strike Extreme score: 3384
3DMark Fire Strike Ultra score:1262
The excel performance proof the brand new 960 graphics card comes with good a high Cost/Performance Value.
Now, check out this test benchmark score of the renowned game “The Crew”.
The game presents an ultra-quality display, 60 Frames Per Second (FPS)
FPS: Average frames is at:
Frames: 3859 - Time: 76828ms - Avg: 50.229 - Min: 43 - Max: 56
The comments of the game for your reference:
There are many types of missions that can be chosen from the America’s map.
Street racing, high-speed collision, breakaway from police, sky jumps, zigzagging, etc… make the game quite dynamic.
Now, when it comes to multi-player matches, the performance has exceeded expectations. Perhaps, it is the killer Ethernet that’s working the magic. Thus, this game is highly recommended if you have the right rig.
The downside is that the display intricacy is not as refined as GTA V and in addition, the game FPS is limited at 60 FPS. However, the overall gaming flow and performance is better than good.
The user's comment for using MSI Gaming 5 motherboard and 960 graphics card:
(The following commends are translated from user’s article, does not represent the viewpoint of MSI) ^^
Recently, MSI GTX 960 just launched so the initial price tag is still adjustable.
According to the current product line, it seems like this GPU is going to replace 750Ti. So once all the stocks (750Ti) at the store empties, we are most likely to see a price drop on GTX960.
Once the price hits the sweet spot, it’s time to try out GTX960 SLI’s performance.
The CP value on MSI GTX960 and GAMING 5 MB is pretty high. But the XSplit software that comes with the product is a bit annoying since the authentication steps are divided into 2 parts to go through for using it.
Enough said, anyways, GAME ON!

NVIDIA 960 card + GAMING 5 motherboard = best bundle for budget gaming!
it would be nice to see more testing of hardware-demanding games!

HP Envy 15 Heating Issues and Screen Damage

Hello,
This is going to be quite long since I'm going to explain everything in as much detail as possible.
I bought my HP Envy 15 (j123tx) in September 2014 and for three months I had absolutely no issue with it (work wise and gaming wise) until one day I booted up the computer and noticed that a big rectangular portion of the screen (on the top - in the rectangular area that aligns with the touchpad when the lid is closed) was discoloured. Specifically it was much darker than the rest of the screen on a black background and yellow on a white background.
After checking to see if there was anything on the screen's surface, I realized it was a hardware issue and decided to use my warranty (of which I have another 8 months or so remaining). I told the retailers about the issue and they told me it could be because of the pressure applied on the lid (when it is closed) that affects the screen specifically in that area since the touchpad is a bit sunken in to the notebook's body. After expressing my displeasure at how inconvenient that is since I've taken very good care of my notebook and have only transported it in the HP notebook bag, they promised me that they would send it to the HP Service Center in Sri Lanka who would replace the display panel for me (obviously since my notebook is still under warranty).
After 10 working days, I went over to the retailer's warranty center and collected my notebook with the display panel replaced and the problem gone. I did however notice that the technicians had pasted a note next to the touchpad which read "Check the temperature of the touchpad. It could be heating up and damaging the screen". I asked the retailer's technicians what this meant and they told me that since the notebook has a magnesium (or magnesium based) body, it tends to heat up. The heat could also be heating up the touchpad (since that too seems to be made of magnesium). As a result whenever I close the lid of my notebook, the rectangular screen area directly above the touchpad could be heating up and thus getting damaged.
Now this to me seems like a huge product defect. I've been using HP notebooks for more than 8 years and I've never heard of this issue before. I asked the technicians how I could prevent this from occurring again and they told me to use the little cloth that came with the laptop when I bought it that is placed under the lid (between the screen and the keyboard) when the lid is closed.
While using that little cloth doesn't seem to be quite inconvenient, I'm very afraid that the problem will occur again and I'll have to get it fixed again which involves transferring all my data and losing my notebook for 2 weeks which is highly problematic for me as I require it for work. Should the problem occur again outside the warranty period, I feel I may have wasted a good amount of money on this notebook when I trusted HP over its competitors simply due to my past experiences with its reliability, durability and performance.
While I realize this is not a current issue - I would really like to know if this issue has been experienced before (my search did not turn up anything related) and if I do have to be worried about it happening again and if so, how I should go about handling it with the retailers (perhaps I should give it back and ask for a refund for selling me a defective product).
Thank you sincerely.
PS: I have attached a picture of the problem when it occurred for your reference.

Thanks for the prompt reply WeiH.
Sadly there doesn't seem to be an HP Service Center in my country (Sri Lanka). So now I'm really confused as to what my retailer's technicians meant by "we'll send it to the local HP Support Center and have your display panel replaced".
Whatever they did, the display panel has been replaced and I've been using it for less than a week so far with no issues. The touchpad hasn't really been heating up and has in fact been as warm as the rest of the notebook. Perhaps it's because I have now turned on the option of disabling the touchpad whenever an external cursor device is attached (since I primarily always use a mouse).
Needless to say, since we both have no clue as to how the touchpad overheated and damaged the screen (in the exact position and measurement as the touchpad) I feel like it's just a matter of time before it happens again.
Obviously I understand that there's little you can do on your side other than direct me to an HP Support Center. However I hope my worries are justified as I feel that as a consumer I shouldn't have to worry about my brand new product malfunctioning by no fault of my own.

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Mythtv, auto shutdown no longer working, scheduler.cpp ?

Following a recent update the automatic shutdown of my backend is no longer working (well, at least not reliably).
I have 3 scripts set up in the relevant sections of the mythtv-setup to check if myth is ok to shut down, set the new wakeup time and perform the actual shutdown. These scripts still work alright, but the backend is not initiating the shutdown any more in some cases.
Lots of trial and error makes me think that this is somehow related to scheduler.cpp, but I am not sure if this is the case or how to fix it.
I think I have established a pattern:
Scenario 1:
- Boot backend
- do nothing else (e.g. start remote frontend or mythfrontend on the backend)
- automatic shutdown does not work
Scenario 2:
- Boot backend
- start remote frontend
- shut down frontend
- automatic shutdown does not work
- restart backend service (without reboot)
- automatic shutdown works
I also notice that in scenario 2 (when automatic shutdown works) there are a whole heap of these kind of messages right until shutdown occurs:
2013-04-29 19:18:07.592125 N [660/738] Expire autoexpire.cpp:641 (SendDeleteMessages) - Expiring 156 MB for 1073 at 2013-04-13T11:50:20Z => Hulk
2013-04-29 19:18:07.632899 E [660/660] CoreContext mainserver.cpp:2610 (DoHandleDeleteRecording) - ERROR when trying to delete file: myth://192.168.1.103:65103:6543/1070_20120126203445.mpg. File doesn't exist. Database metadata will not be removed.
2013-04-29 19:18:07.889638 E [660/660] CoreContext mainserver.cpp:2610 (DoHandleDeleteRecording) - ERROR when trying to delete file: myth://192.168.1.103:65103:6543/1022_20120206192600.mpg. File doesn't exist. Database metadata will not be removed.
In scenario 2 (successful) I see the following in the log just before the above auto expire stuff:
Scheduler scheduler.cpp:2307 (HandleRunSchedulerStartup) - Scheduler: Seem to be woken up by USER
then a whole heap of auto expiry stuff and finally:
Scheduler scheduler.cpp:2862 (CheckShutdownServer) - CheckShutdownServer returned - OK to shutdown
2013-04-29 19:19:55.276775 N [660/735] Scheduler scheduler.cpp:2947 (ShutdownServer) - Running the command to set the next scheduled wakeup time :-
sudo /home/laffi/scripts/MythSetWakeup 1367229120
2013-04-29 19:19:55.372582 N [660/735] Scheduler scheduler.cpp:2974 (ShutdownServer) - Running the command to shutdown this computer :-
sudo /home/laffi/scripts/MythShutdown
In scenario 1 (unsuccessfull shutdown) I also get
Scheduler scheduler.cpp:2307 (HandleRunSchedulerStartup) - Scheduler: Seem to be woken up by USER
and then autoexpiry, but then, once a frontend connects:
ProcessRequest mainserver.cpp:1385 (HandleAnnounce) - adding: frontend as a client (events: 0)
I don't get autoexpiry of files and no shutdown, both of which I believe are initiated by scheduler.cpp
I also noticed the following in the logs when auto shutdown does not work:
2013-04-29 15:40:36.046359 I [648/848] ProcessRequest mainserver.cpp:1385 (HandleAnnounce) - adding: mythbackend as a client (events: 1)
which does not seem to appear in the logs when auto shutdown works.
Any ideas ? I have found very little (next to none) regarding scheduler.cpp when searching.

The other side of the VPN is a TMG server hosted at our main office. I can connect to it off site, and others were connected to it remotely as well, but for some reason users at that remote site can no longer connect to the VPN.
I talked to my ISP wondering if there was something that was blocked due to the change from dhcp to static IP addresses, but they don't see anything.

Can I charge my I Pad Gen1 with my charger from my I Phone 3? I bought it used , I have not received it yet, need to know because I have the regular charger and auto.

Hi I bought an I Pad Gen1, used, with no accessories, will my I Phone 3 charger, wall and auto work with it or do I need to buy another? Have not received it yet( ebay).Please advise. Thank you.

Your iPhone charger is 5W, whereas the iPad 1 charger is 10W. The iPhone charger will work, but the charge time will be more than double. If you buy a new charger, get the iPad 4 charger which is 12W. It will charge faster than the 10W charger.
FYI
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
What to Do If Your iPad Won't Charge
http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

G400s gaming issues and auto shutdown

Similar Messages

Maybe you are looking for