G5 burner is not producing readable audio

my g4 powerbook does a fine job with audio cds, why is it my brand new g5 dual procccessor will not create cds my car can read....same cd is readable when burned on g4 ....HUH? this is what i call paying more for less

pardon me...itunes is set for import to its default which is aiff, the options for burning are also at default which is "audio cd" gap between songs : none and soundcheck is on (sorry new to computers)

Similar Messages

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

This is a continuation of my earlier question. The CDs are burning with a .cda or .cdda format I read the articles suggested, but I don't yet have an answer. The files I am trying to burn are not protected. They are personal recordings.

The CDs are in a .cda format. I am starting with .AAC or mp3. I have no player that can handle a .cda or .cdda format. This relates to my earlier question. I could not see how to add to that. I am using Vista 32 bit. I never had a problem with this before. I tried re-downloading itunes. I can burn a CD with Power2Go 8 and RealPlayer. I have not tried others.

There is no "cda format" - this is just how Windows Explorer shows the tracks on an audio CD that can be played on any CD player. When you use iTunes to burn a playlist to an audio disc, it creates a standard "Red Book" disc, converting the format of the files within the iTunes library to 16/44.1 audio (albeit without recovering any of diminished quality of mp3 or aac data). If you want to create a CD that contains the files from iTunes, in the format in which they exist in the library, you should use the MP3 CD or Data CD selection from the iTunes Burn Settings dialog.

How to burn a DVD with two audio track?

There is a projet with the original video and a second audio track with music. I want to burn a DVD with both audio tracks. When playing the DVD you should be able to select audio track 1 (the original sound) or audio track 2 (the music). With Adobe Encore DVD it was easy to configure the two audio tracks and burn the DVD. It is posible to do the same from Adobe Premier Elements 11?
Thanks,
Jordi

Welcome to the forum.
Unfortunately, PrE does not allow for supplemental Audio Tracks, when authoring.
I use Adobe Encore for this, but it is only available bundled with Premiere Pro. I do not know if some other, third party, full-featured authoring apps., like Sony's DVD Architect can do that, but I would suspect that they can. The specifications for DVD Architect should have that information, and as it's quite common in full-featured authoring apps., I anticipate that it has that capability.
If you do go with that program, our MOD, Steve Grisetti, has written a very good book on DVD Architect, and it's available at Muvipix.com.
Good luck,
Hunt

Burned disks not playing on stereo

Hi. I have a G4 iBook running 10.4.8 and have been burning mp3s on to CD. The disk then plays on the iBook but is not recognized by stereo players. Message like NO DISC get flagged up. Can anyone please help ? Thanks.
iBook G4 Mac OS X (10.4.8)

Here is a Knowledge Base Article that has some good suggestions for preparing for and burning an audio CD in iTunes:
http://docs.info.apple.com/article.html?artnum=60784
The important steps are changing the preferences:
4. Select Advanced > Burning.
5. Choose Audio CD from the Disc Format selections.
It's possible that your iTunes is set-up to burn something other than audio CDs. For Toast, you need to also make sure "Audio CD" is selected for the format on the left-hand side of the Audio tab. If all your preferences are set correctly and you're still having trouble, have you tried a different brand CD-R disk? It's possible that some non-computer optical drives just don't like specific brands of CD-R disks.
-Doug

Disc burner did not work

since i have updated my imac fom 10.3.7 to 10.4.7 it is not possible to burn discs. i don´t know why and i am not very good in mac knowledge. all the time i try to burn the error number 0*8002006D is shown. ans the system says that the burner can not calibrate, because it needs higher energy.
please heep
thanks

Hello Wade,
the problem seems to be the audio. Give us a little more info on what audio you used in the iMovie project (original audio, music, MP3, Aiff...).
Also: what audio setting does your camcorder have? Should be 16-bit, 12-bit is a big no-no with iDVD, see this thread:
http://discussions.apple.com/thread.jspa?threadID=494268&tstart=0&start=45
12 hours seem a long time to encode 45 min of video ... your mac should be able to do that in 4-5 hours max. I would suggest you convert all MP3 audio to AIFF before importing to iM.
If your original audio is 12-bit you can try to export the whole audio (original & music) via QT using the audio only option with 24-bit Integer, then re-import into iM.
Get the latest QT update, if you haven't done so already.
Also do some basic iDVD troubleshooting:
1. free some space on the startup drive (15-20GB recommended)
2. Trash preferences (com.apple.iDVD.plist) and empty trash
3. Repair Disk Permissions using Disk Utility
4. Clear Cache Files (Tools: CacheOutX, Onyx)
Have a look at what John Beatty says in this thread about iDVD trouble shooting:
http://discussions.apple.com/thread.jspa?threadID=508221&tstart=0
Third attempt burn to disc image. end up with two folders AUDIO_TS and VIDEO_TS. the audio folder is empty. no image
the AUDIO_TS folder being empty is perfectly normal for Video DVDs, only music DVDs have audio in that folder
hope this helps
mish

Set DVDSP 4 to produce AC3 audio

Is there a way to set DVDSP 4 to produce AC3 audio?
If not, could I import into Quicktime and export in that format?
I have a large video file and an AIF file of 1.11GB. I have looked and cannot seem to find any way to change the audio output.
Compressor is out of the question as it will not connect to background processing, hasn't done it for a while.
Thanks

Which update? My compressor (and Quicktime, for that matter) conversions all starting to hang, crash, or otherwise misbehave when I installed iLife '09 and it software udpates. I finally got back to sanity by doing the following to my misbehaving systems:
1. Download and install the 10.5.7 Combo update (my system had already been so updated, but I reapplied the update).
2. Download and install Quicktime 7.6 (again, over the same version I already had).
3. Download and install "ProApplicationsUpdate2008-05" (that I likewise had already installed)
Then my Compressor and Quicktime issues seemed to just go away. Oh, and between each of the updates, I did a "repair permissions" and reboot. My iLife '09 stuff seems to work (I really just wanted iPhoto and iWeb updates), as does FCS 6.0.5 and Compressor 3.0.5.
Just started a new FCS project (HDV tape to ProRes 422, compress (frame on) to mpeg2, ac3 (stereo) for DVD S4, also to mp4 for web use and it all worked fine.
Eddie O
Message was edited by: Edward A. Oates

I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

Error on start: Path does not exist: /Library/Audio/Apple Loops Index

I get the error "Path does not exist: /Library/Audio/Apple Loops Index
Without this directory you can not use the LoopBrowser. Please make sure this directory exists" when starting Garage Band. I also cannot use the onscreen keyboard, or musical typing in GarageBand. All other sounds work fine.
The only thing that changed since I last used GB was that I installed Leopard. (and that was a while ago, so I thought all was well and got rid of my last Tiger backup. )
Any suggestions?
Thanks!

Another update: I tried to reinstall garage band from the disks that came with my mac, but got the error:
"Install Failed
Unable to Install
The Installer could not install the software because there was no software found to install."
The following errors appeared in Console:
4/7/08 4/7/08 9:50:08 PM kernel SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x11, ASCQ = 0x00
4/7/08 4/7/08 9:50:09 PM kernel SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x11, ASCQ = 0x00
4/7/08 4/7/08 9:50:09 PM kernel disk2s3: I/O error.
4/7/08 4/7/08 9:50:10 PM Installer[519] -[IFPkg(InfoConversionPrivate) _parseOldStyleForLanguage:] - can't find .info file (GarageBand)
4/7/08 4/7/08 9:50:10 PM Installer[519] The package "GarageBand" could not be opened. This can happen if the package has incorrect permissions or if the package has been renamed.
4/7/08 4/7/08 9:50:10 PM Installer[519] PFPackage::packageWithURL - can't instantiate package: /Volumes/Mac OS X Install Disc 2/Packages/GarageBand.mpkg/Contents/Installers/GarageBand.pkg
Any ideas?
Thanks!

SQL 2012 SP1 - How to determine a query that causes Error 8623 in SQL Log: The query processor ran out of internal resources and could not produce a query plan. This is a rare event...

We are getting multiple 8623 Errors in SQL Log while running Vendor's software.
How can you catch which Query causes the error?
I tried to catch it using SQL Profiler Trace but it doesn't show which Query/Sp is the one causing an error.
I also tried to use Extended Event session to catch it, but it doesn't create any output either.
Error:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that
reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Extended Event Session that I used;
CREATE EVENT SESSION
overly_complex_queries
ON SERVER
ADD EVENT sqlserver.error_reported
ACTION (sqlserver.sql_text, sqlserver.tsql_stack, sqlserver.database_id, sqlserver.username)
WHERE ([severity] = 16
AND [error_number] = 8623)
ADD TARGET package0.asynchronous_file_target
(SET filename = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xel' ,
metadatafile = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xem',
max_file_size = 10,
max_rollover_files = 5)
WITH (MAX_DISPATCH_LATENCY = 5SECONDS)
GO
-- Start the session
ALTER EVENT SESSION overly_complex_queries
ON SERVER STATE = START
GO
It creates only .xel file, but not .xem
Any help/advice is greatly appreciated

Hi VK_DBA,
According to your error message, about which query statement may fail with error message 8623, as other post, you can use trace flag 4102 & 4118 for overcoming this error. Another way is looking for queries with very long IN lists, a large number of
UNIONs, or a large number of nested sub-queries. These are the most common causes of this particular error message.
The error 8623 occurs when attempting to select records through a query with a large number of entries in the "IN" clause (> 10,000). For avoiding this error, I suggest that you could apply the latest Cumulative Updates media for SQL Server 2012 Service
Pack 1, then simplify the query. You may try divide and conquer approach to get part of the query working (as temp table) and then add extra joins / conditions. Or You could try to run the query using the hint option (force order), option (hash join), option
(merge join) with a plan guide.
For more information about error 8623, you can review the following article.
http://blogs.technet.com/b/mdegre/archive/2012/03/13/8623-the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

HT201272 I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help

I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help.

Audiobooks are currently a one-time only download from the store. If you don't have it on your computer (audiobooks go into the Books part of your iTunes library) nor on a backup, then if it's still in the store you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT1567 Itunes 10.6.1.7 is not recognising an Audio CD when inserted in the drive. This means I connot import any CD's. What could be wrong?

iTunes 10.6.1.7 is not recognising an audio CD when inserted in the drive. This means that I cannot import CD's. It used to work but since installing other software iTunes does not see the audio CD and will not open the drive when "eject disc" is selected from the controls menu.

Check the drive letter of your CD drive. iTunes doesn't seem to work properly with CD drives if they are mapped to the letters A or B. Use Disk Management tool in windows to change to a different letter and this will fix it (if this is the cause!).

Media burner is not working in 4s what to do next

media burner is not working in 4s what to do next

As when there is a problem with a 3rd party app on your computer, contact the app developer for Media Burner regarding a problem with their iPhone app.

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

G5 burner is not producing readable audio

Similar Messages

Maybe you are looking for