Gaming 5 MOBO and Windows 8.1 update issue

First build here. Very Novice.
On initial windows install everything works. installed only my wireless card, and avast virus protect. When I go to update Windows it goes to download and then nothing happens. backed out and restarted. it shows updates needed on start screen. try to download again and nothing. go to restart again and it took like 20 mins to power off, and the screen goes blank but mobo still on and fans still running. performed hard restart and bios screen comes up then windows flag then black screen. they just continue to alternate.
Wiped and started again with windows install and same thing.
anyone else experience this? any thoughts?
Build is :
MSI ATX DDR3 2600 LGA 1150 Motherboards Z97 GAMING 5
Intel Core i5-4590 BX80646I54590 Processor (6M Cache, 3.3 GHz)
ASUS Dual-Band Wireless-AC1900 PCI-E Adapter (PCE-AC68)
Corsair CX Series 500 Watt ATX/EPS Modular 80 PLUS Bronze ATX12V/EPS12V 456 Power Supply CX500M
Corsair Vengeance Blue 8 GB (2X4 GB) PC3-12800 1600mHz DDR3 240-Pin SDRAM Dual Channel Memory Kit CMZ8GX3M2A1600C9B
Western Digital 1 TB SATA III 7200 RPM 64 MB Cache Bulk/OEM Desktop Hard Drive, Black, WD1003FZEX
ANTEC No Power Supply ATX Mid Tower Case, Black GX700

Remove wireless card and see if system works normally without. If so try adding the card in lowest PCI-E slot.

Similar Messages

  • AnyConnect and Windows 8.1 Update issue

    I have an ISA550W deployed at our office locations. For remote access I am testing AnyConnect v3.1.05187. The laptops I'm testing on have Windows 8.1 Pro Update with all of the latest patches as of this post.
    I read the release notes and as a consequence made sure WinPcap is not installed and the service non-existent.
    I have run the MicrosoftFixit25005.
    When I installed AnyConnect I unchecked the options for "Diagnostic and Reporting Tool", "Network Access Manager", & "Web Security".
    Here is the problem; upon initial install it works flawlessly even without a reboot after running the installer. BUT if the OS is rebooted, it gives the following error: "The service provider in your current location is restricting access to the internet. You need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."
    Bollox! lol.
    Now I can confirm that sometimes it takes a couple reboots or even until the next day for it to be broken. But all I have to do is uninstall everything, reinstall it and it works, all with no reboot after uninstall or reinstall.
    So why does this thing just decide to break its self?

    Anyone have any ideas? This is a major pain to everyone in our company that works remotely.
    Perhaps someone could even just walk me thru how to produce a log to post here that may help, although I doubt it since I can't predict on which reboot it will break.
    Surely someone else has had this issue or there is a known resolution for it? Please help!
    Thanks! Alex

  • A55M-P33 and windows xp 32bit incompatibility issue ?

    Ok I got a weird one that seems to be more of a compatibility issue than bad parts...
    Motherboard: A55M-P33 MS-7786 V1.0
    CPU: AMD A4 3400
    RAM: Kingston 4GB 10600  KVR1333D3N9/4G
    HDD: Western Digital 500GB Caviar Blue WD5000AAKX
    PSU: CoolerMaster Elite Power 400w  RS-400-PSAR
    OS: Windows XP Home SP3 32bit
    On a clean install of windows I am getting various bsods.  Typically after I install a few round of drivers.  Usually am able to get the dotnetframework + catalyst control center (chipset) drivers installed without incident.  Seemingly about the time I either install the NIC or the SOUND drivers do I start seeing problems.  Sometimes its 0x8e sometimes its 0x50 sometimes i dont get a bluescreen but on startup i get the infamous missing or corrupt /windows/system32/config/system ... I can always boot from a XP disc and run chkdsk /p to get it to startup, but soon thereafter the problem reoccurs (sometimes immediately with the next reboot).  I've tried to use 2 other hard drives, one a brand new WD 1TB, another is a used tester drive we have laying around here.. both have similar results.  I've tried to update the bios to the latest revision (1.4) but that didnt make a difference. 
    Here's the real kicker, I have another PC with almost IDENTICAL hardware (only difference is hard drive) (also of which I havnt spent nearly as much time with as this one) that gets a 0x0A bsod.  All the hardware in both PCs are brand new (unless where otherwise noted).
    Is there some sort of compatibility issue with this hardware and windows xp?  I've let memtest86 run on both PCs for about 24 hours with 0 errors.  Diagnostic on all hard drives mentioned turns up no issues..  I've tried different (new) sata cables as well.  Any insight or any ideas or suggestions would be greatly appreciated.

    here is the latest minidump.  clean install of xp.  installed dotnetframework then chipset drivers - both from CD included with mobo.  restarted the pc about 5 times to get this to occur, happened on shut down.
    Code: [Select]
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced.  This cannot be protected by try-except,
    it must be protected by a Probe.  Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: e1ff3f30, memory referenced.
    Arg2: 00000001, value 0 = read operation, 1 = write operation.
    Arg3: f4ab7504, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 00000002, (reserved)
    Debugging Details:
    Could not read faulting driver name
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    WRITE_ADDRESS: GetUlongFromAddress: unable to read from 80561f50
     e1ff3f30
    FAULTING_IP:
    ati2mtag+1f504
    f4ab7504 f3ab            rep stos dword ptr es:[edi]
    MM_INTERNAL_CODE:  2
    DEFAULT_BUCKET_ID:  DRIVER_FAULT
    BUGCHECK_STR:  0x50
    PROCESS_NAME:  csrss.exe
    LAST_CONTROL_TRANSFER:  from f4b163e9 to f4ab7504
    STACK_TEXT: 
    WARNING: Stack unwind information not available. Following frames may be wrong.
    f76b63b4 f4b163e9 e1ff3f30 00000000 00000010 ati2mtag+0x1f504
    f76b63c8 f4b55bc2 e1ff3f30 00000010 f76b649c ati2mtag+0x7e3e9
    f76b6420 f4b55d91 106b649c 00000001 e13ea0a0 ati2mtag+0xbdbc2
    f76b643c f4b0b5ca f76b649c 00000000 00000000 ati2mtag+0xbdd91
    f76b6468 f4b1126d 00000001 f76b650c f76b64ec ati2mtag+0x735ca
    f76b6478 f4afeea5 f76b64e0 00000002 e1416dc0 ati2mtag+0x7926d
    f76b64ec f4affaca f76b650c 00000050 10000000 ati2mtag+0x66ea5
    f76b6528 f4affbd1 00000050 00000000 e1416e00 ati2mtag+0x67aca
    f76b6558 f4b2207a e1632828 e179de20 f4ae601b ati2mtag+0x67bd1
    f76b65b0 f4ae61cf 0079de20 e179de01 f76b6610 ati2mtag+0x8a07a
    f76b65d0 f4ae642a e179de20 e179de01 f76b6610 ati2mtag+0x4e1cf
    f76b65f4 f4ae4ed2 e179de01 00000004 f76b6610 ati2mtag+0x4e42a
    f76b6648 f4ac010a e179de20 00000004 00000000 ati2mtag+0x4ced2
    f76b6674 f4ab5ecf 8a246530 e15ad9c0 f76b6698 ati2mtag+0x2810a
    f76b6684 f4ab137e f76b6700 00000001 8a184350 ati2mtag+0x1decf
    f76b6698 f5175f83 8a246530 f76b6700 8a1840f0 ati2mtag+0x1937e
    f76b673c f51753e5 8a184350 8a184350 f76b6760 ati2mtag+0x6ddf83
    f76b674c f5152421 8a184350 8a2c16e8 00000001 ati2mtag+0x6dd3e5
    f76b6760 f4a9292e 8a184350 8a2c1764 8a2c16d0 ati2mtag+0x6ba421
    f76b6820 f4c48ca1 8a184038 8a2c16d0 8a2c16e0 VIDEOPRT!pVideoPortDispatch+0xcc4
    f76b683c 804ef18f 8a184038 8a2c16d0 8a2c16d0 ati2mtag+0x1b0ca1
    f76b684c 805831fa 8a184020 89ef70ac f76b69e4 nt!IopfCallDriver+0x31
    f76b692c 805bf444 8a184038 00000000 89ef7008 nt!IopParseDevice+0xa12
    f76b69a4 805bb9d0 00000000 f76b69e4 00000240 nt!ObpLookupObjectName+0x53c
    f76b69f8 80576033 00000000 00000000 70b9c800 nt!ObOpenObjectByName+0xea
    f76b6a74 805769aa f76b6bf0 00000000 f76b6bc8 nt!IopCreateFile+0x407
    f76b6ad0 8057a1a9 f76b6bf0 00000000 f76b6bc8 nt!IoCreateFile+0x8e
    f76b6b10 8054161c f76b6bf0 00000000 f76b6bc8 nt!NtOpenFile+0x27
    f76b6b10 8050064d f76b6bf0 00000000 f76b6bc8 nt!KiFastCallEntry+0xfc
    f76b6ba0 805761e2 f76b6bf0 00000000 f76b6bc8 nt!ZwOpenFile+0x11
    f76b6be8 bf872f9e f76b6c44 00000000 f76b6c68 nt!IoGetDeviceObjectPointer+0x40
    f76b6cd8 bf8a704a 00000001 00000001 00000001 win32k!DrvUpdateGraphicsDeviceList+0x3d2
    f76b6d18 bf8a6f44 00000001 00000008 f76b6d48 win32k!DrvInitConsole+0xaa
    f76b6d28 bf8a6ed5 00000001 f76b6d64 0015fd98 win32k!InitVideo+0x18
    f76b6d48 bf8a8249 f76b6d64 8054161c 00050000 win32k!UserInitialize+0x14d
    f76b6d50 8054161c 00050000 00000054 00000058 win32k!NtUserInitialize+0x87
    f76b6d50 7c90e4f4 00050000 00000054 00000058 nt!KiFastCallEntry+0xfc
    0015fdb0 00000000 00000000 00000000 00000000 0x7c90e4f4
    STACK_COMMAND:  kb
    FOLLOWUP_IP:
    ati2mtag+1f504
    f4ab7504 f3ab            rep stos dword ptr es:[edi]
    SYMBOL_STACK_INDEX:  0
    SYMBOL_NAME:  ati2mtag+1f504
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: ati2mtag
    IMAGE_NAME:  ati2mtag.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4e31d503
    FAILURE_BUCKET_ID:  0x50_ati2mtag+1f504
    BUCKET_ID:  0x50_ati2mtag+1f504
    Followup: MachineOwner
    looking @ device manager: Video Drivers are version 8.881.0.0  the ati2mtag.sys file mentioned says file version 6.14.10.7213

  • Youtube and Windows 8.1 touch issue

    I am running windows 8.1 on my surface pro 2, and I am having some issues with using the touch interface with youtube. When I have a youtube page open and I click on the flash element to start the video, or if I touch any of the buttons within the flash element, the video will freeze and firefox will be unresponsive until I plug in a mouse and hover the cursor over the window.
    This problem has only started happening since I updated the flash player plugin the other day, and prior to that update youtube appeared to have a more touch friendly, chunkier interface, that also worked more consistently with touch inputs.
    Now this is most likely a flash problem, and it has these kinds of issues with a couple of other flash elements, but since I only appear to get it with firefox I thought I would ask around here for advice.
    Thanks for any help!

    And it would appear that updating a few more windows drivers has serendipitously fixed all of my issues. Please ignore this question.

  • WRT54GL and Windows 7 log in issue

    I have a network of several PC's on my WRT54GL router - firmware 4.30.14 build 5, Oct. 26, 2009
    All PC's are XP SP3 except one Win 7 PC
    When I access my WRT54GL from all of my XP computers, I log in once and I am done. I can access all the setup pages from then on.
    When I log with my Win 7 computer, I keep getting the Windows security pop up window every time I click on a new tab or page.
    I can view all the pages and tabs no problem once I enter the password again, but it is really annoying that it keeps asking
    for log in info for every new item I click on.
    Ticking the remember my credentials box does no good, it still ask again and again
    This is my first Windows 7 computer, not sure how to stop this annoying behavior.
    Any help on this matter is appreciated
    This is the window that pops up all the time
    Solved!
    Go to Solution.

    Update
    This seems to be a IE9 issue
    I just accessed the router with Firefox and Windows 7
    It only asked for user name and password once and I was able to browse all pages without being asked again for log in info.
    I'll go ahead and mark it as a solution because it seems to an IE9 issue

  • Ipod Touch and Windows 7 sync/visibility issues Issues

    Hi All
    Just wondering if anyone knows when Apple intend to fix the ongoing problem with Ipod touch and windows 7 sync problems.
    I have just got windows 7 64 bit from Vista 64 Bit. I had no problems before the clean install.
    Now I have to close my pc down before I attach my pod for sync, when it shows up on itunes it only syncs twenty or so tracks before it "times out" the pc freezes untill i cancel the sync on the ipod and disconnect it.
    I have tried like many other people to re-install itunes the latest version 9.02 (i think). I have also ran the diagnsotic check from itunes and that just shows that no Ipod is connected. Itunes itself runs and downloads ok.
    This is my latest diagnostic chec
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    Packard Bell ixtreme M3720
    iTunes 9.0.2.25
    QuickTime 7.6.5
    FairPlay 1.5.23
    Apple Application Support 1.1.0
    iPod Updater Library 9.0d11
    CD Driver 2.1.0.0
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number B5B9F9xxxxxxxx
    Current user is not an administrator.
    The current local date and time is 2009-11-20 23:26:31.
    iTunes is not running in safe mode.
    Video Display Information
    NVIDIA, NVIDIA GeForce GT 220
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.0.2.25 is currently running.
    iTunesHelper 9.0.2.25 is currently running.
    Apple Mobile Device service 2.50.39.0 is currently running.
    Universal Serial Bus Controllers:
    Standard Enhanced PCI to USB Host Controller. Device is working properly.
    Standard OpenHCD USB Host Controller. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    iPod touch running firmware version 3.1.2
    Serial Number: 9C8xxxxxxx
    ** iPhone/iPod touch Sync Tests **
    No iPhone or iPod found.
    In case your wondering about administrator prefs , I have also ran it with full admin rights.
    This problem seems to be ongoing, if anyone has any info, It would be appreciated.
    The Truth is out there, someone from apple has to find it.
    Regards
    K£VLY

    http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/38f25c1d -de67-4c74-8845-2cd3a15d8e41

  • Oracle 9i and windows 2003 R2 installation issues

    Hi All,
    I have a windows 2003 R2 server with oracle 9.2.0.8 installed both OS and DB are 32bit. The server has 12gb ram and I therefore use AWE and /PAE, however when ever the number of connections exceeds >60 memory errors start to appear and sessions crash. Has anyone out there carried out a successful install of 9i and windows 2003 R2. Can anyone help with the resolution of these issues.
    regards
    Alan

    some more information
    I’ve just restarted the server with its full quota of 16GB of RAM and selected both boot.ini switches (/PAE and /3GB) at server startup. I then amended the dbblock_lru_latches parameter from 128 to 64. Before I even started the database I tried running ‘ipconfig /all’ at the command prompt with the following result:
    D:\Oracle>ipconfig /all
    Windows IP Configuration
    An internal error occurred: Insufficient system resources exist to complete the requested service.
    Please contact Microsoft Product Support Services for further help.
    is it windows causing these issues?
    rgds
    alan

  • Need Sound Card Compatible With Intel D975XBX Mobo and Windows 7

    Did a search and no joy. I built a home theater computer about 5 years ago around the D975XBX,? I was using the Sigmatel integrated sound via toslink to my receiver without any problems. I installed W7 yesterday only to find that there are no Intel mobo drivers for W7. So before I go throught he hassle and expense of replacing the mobo and processor, are there any sound cards that are compatible with this mobo and W7? I don't do gaming on this machine, or 3D, mainly 5. out to my receiver. Thanks.
    Tim?

    DWell, I'll answer my own question. Finding it very hard to belei've that a driver wasn't available for the Sigmatel, I upgraded the Bios, then did another seach. Cha-ching, money!
    I really like SB cards, but I don't like spending money when I don't have to.
    Even though Intel said it stopped supporting?the mono?in '08, the bios was an '09 version. This may be helpful to others who are using this mobo.

  • Installation Server and Windows 7 - Admin Rights Issue

    Here is a good one.  Completely reproducible error when granting Local Admin Rights by the LSH Service.
    For those with SAPGui Installation Server (SAPGui 7.20 Patch 6 or above) ... try this on a Windows 7 SP1 front end when you are NOT logged on with local admin rights.
      1) Open the Windows RUN dialog
      2) Type path to your installation server\setup\nwsapsetup.exe
      3) You should find the install wizard starts (granting local admin rights) as expected.
    NOW TRY THIS
      1) Type path to your installation server\setup\nwsapsetup.exe /uninstall
      2) You will find that you get a dialog about can't grant admin rights. Un-install will abort.
    This only appears to happen with the /uninstall switch!  Using /product= for example it will still grant admin rights.
    BIZZARE ...
    I've opened a Customer Support Message (Friday) priority - MEDIUM  have not heard back from SAP Support yet.
    Bob

    Jude,
    Thanks, it looks like that note has been getting a lot of update activity lately because the newly released Patch 8 has nwsapsetup.exe as version:  8.6.1.62   and that version also has the issue with the /nnnnnn switches. 
    I do have to say however, that this issue with nwsapsetup.exe and admin rights (requiring SapSetup.exe_Patch) first appeared with the release of Patch 6 for the Gui.  It was fixed for WinXP (I had a customer support message opened on this).  So why didn't anyone also test on Win7?
    Who is QA-ing these software releases? 
    Patch 8 had the same problem. 
    The change log for SapSetup.exe_Patch, is up to 8.1.6.70 now. 
    How are we in large enterprises to feel comfortable deploying any of this?
    End of rant ....
    Bob
    P.S. I really appreciate your presence here ... the tech assigned to my formal Support Message on the matter still has not gotten back advising of the updated release of SapSetup.exe_Patch. 
    Message: 0000746888
    Edited by: Bob Held on Sep 16, 2011 10:30 PM

  • Envy 15 3205TX - Windows 8.1 Update Issues

    Updated to Windows 8.1
    1. Audio no longer works, even though drivers says everything is working and the sound volume bar shows flutuation onscreen.
    2. Everything looks grainy and magnified, updated to newest Radeon Drivers, same results.
    3. Beats Audio control deck no longer works when setting the physical Beats dial preference.
    4. Network seems jumpy, with disconnects a plenty although it was perfectly fine before the update.
    Can HP please support one of their top notebook models better, looking at the software available on the support site, most software are early 2012.

    Hi Unizzy:
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a business product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Z97-GD65 mobo and Killer E2200 Ethernet controller issue

    Hi there.
    I recently bought a new board, a MSI Z97-GD65 Gaming and i'm happy with it, but I have a little problem I can't solve: My internet download rate is exactly 10MB/s when my connection can reach 20MB/s.
    Following instructions of this forum I removed the Killer Ethernet Manager using the "Killer_clear(64bits)" and installed the stand-alone drivers for the Killer E2200 PCI-E Controller, but still suffering the same cut of download rate.
    The only thing I could now is try to "transform" that controller into a "Qualcomm Atheros AR813X/AR815X/816X Series PCI-E Ethernet Controller", but I don't know if it would be the solution.
    Anyone here has the same issue?
    (BTW I use Windows 7 64bits FYI)
    Thanks a lot!

    Quote from: moist on 05-June-15, 03:21:27
    Well, I bought a cheap PCI-e ethernet card, installed it, disabled the onboard E2200 killer, started Windows and I got 1,0Gbps in seven seconds without any other software installation need.
    I don't know what's happening with Killer cards , maybe it's a driver issue or a faulty hardware, but i'm sure I won't buy in the future a motherboard that includes this network brand.
    Honestly, I'm right there with you. I absolutely hate the Killer cards.....
    Unfortunately, it's becoming harder and harder to get a motherboard without them, since all the OEM's seem to think that gamers want those cards on their computers. Personally, I hate them with a passion. The software is badly coded, and rarely works as expected.
    The best thing I can suggest doing is using the drivers without the management software. This way you can still use the ethernet adapter, but not be limited by the management software. There should be a stickied post at the top of this forum I believe with information on it.

  • IPhone 3Gs and Mobile Me not updating Issues

    I have an iPhone 3Gs and a mobile me account, everything was working well and if I entered info in my Calender or contacts either on the iPhone or my G5 Tower at home then they would sync up and merge so that the same dates or addresses were in both places.
    Since updating the iphone to 4.0.1 I have had issues with date and contact merging.
    If I add an entry in the calender it appear in my mobile me web calender when sync'ed, but does not transfer to the iPhone. I have checked that on the G5 the calender date book is the iPhones date book. I have checked that Calenders and Contacts are on the mobile me web. but they are not filtering down to the iPhone.
    If I add a date to the calender on the iPhone they are not hitting the G5 tower.
    This was never a problem prior to the phone software update. I have shut the phone down fully and restarted it incase that was an issue. I have also checked the phones Settings
    Settings> Mail, Contact, Calenders and Fetch is set to Push every 30 Mins
    Push > Set to On
    Advanced schedule> Push (Have also tried Fetch as well)
    and
    Settings>for my .Mac email> Mobile Me >
    Mail> On
    Contacts> On
    Calenders On
    BookMarks> On
    Notes>On
    and
    Settings>Calender
    New Invitations Alers > On
    Sync> All Events
    Time Zone Support> On
    Is anyone able to to suggest how I can cure this issue

    I am having the same issue (actually only noticing on phone Mail, haven't checked calendar yet). And this is an iPhone 3GS without the 4.01 update. Been noticing this for a couple of weeks at least. I'll even hit refresh in Mail and it acts like it's trying, but old emails remain (that I trashed at work) and new ones I saw at work iMac are not shown. They eventually update, but not like they should, especially after I have told the phone to refresh. Not the behavior I've known and loved for years.

  • Windows 8.1 Update - issues deploying printers via GPO from a 2012R2 Print Server

    Hi,
    I am trying to deploy a single printer to Windows 8.1 clients in a K-12 environment. We have about 1200 laptops and about 25% of those laptops are installing the printer. Several different users can log on and the printer may or may not be there. The printer
    is being deployed to the Computer not the User. If the printer was successfully installed shouldn't the printer be available immediately after logging in with different AD accounts? Sometimes it shows up 10mins later as if it needed to install it again. I
    read the changes from v3 to v4 printing in Windows 8, Ive checked the event log errors, printer shares, etc. Deploying Printers to Windows 8.1 clients is poor at best even when it supposed to be easier for IT to manage. Also I was under the impression that
    Windows 8.1 clients do not attempt to downloads drivers from a windows print server anymore as they opt to use a v4 print class driver.
    Environment Details:
    Windows 2012R2 Printer Server all patched, Windows 8.1 all patched, AD users are identical as well as the computers (reside in the same OUs) Printer is deployed to the computers, Point and print restrictions is completely disabled. Restarting the print spooler
    on the client has little to no effect. Computers connect wirelessly to the network and print server is in the same building. Started pushing to the user as well to see if it helps. Windows 7 clients are unaffected and get the printer consistently.
    Errors:
    The print spooler failed to download and import the printer driver from \\Server into the driver store for driver KONICA MINOLTA C652SeriesPS. Error code= 800f0242.
    The print spooler failed to import the printer driver that was downloaded from \\Server\print$\x64\PCC\koazca__.inf_amd64_664b51505681ff6d.cab into the driver store for driver KONICA MINOLTA C652SeriesPS. Error code= 800f0242. This can occur if there is
    a problem with the driver or the digital signature of the driver.
    The default printer was changed to \\Server\Konica_Copier,winspool,Ne05:. See the event user data for context information.

    error from event id 600?
    http://technet.microsoft.com/en-us/library/dd393207(v=ws.10).aspx
    did install this hotfix?
    http://support.microsoft.com/kb/2961042/en-us
    those maybe helpful...
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4de0cf6f-3e05-4de4-b1f5-349d27b97234/windows-server-2008-r2-trouble-updating-client-kyocera-drivers?forum=winserverprint
    http://download.microsoft.com/download/5/8/1/581A3BB7-503D-48DA-B898-2BF80FA2A7E7/Understand_and_Troubleshoot_Printing_in_Windows_Server_8_Beta.docx
    Best,
    Howtodo

  • Software Update Point doesn't show Win 2012 R2 and Windows 8.1 updates

    I started deploying Windows 2012 R2 Datacenter servers and some Windows 8.1 workstations. I wanted to make sure that my Software Update Point was downloading updates available to those OS's and after going in to Administration -> Overview -> Site Configuration
    -> Sites -> Configure Site Components -> Software Update Point, I notice that those OS's weren't available to select. 
    I then did some searches on the web and thought my problem was two fold:
    1 - I was using SCCM 2012 SP1. 
    2 - My SCCM 2012 Software Update Point was on a Win 2008 R2 server
    So the first thing I did was upgrade from SCCM 2012 SP1 to SCCM 2012 R2. I then created a Windows 2012 R2 Datacenter server and installed WSUS on it. I then added the server as a Site System Server, added the Software Update Point to it and configured it.
    Unfortunately, this still didn't help me as you can see from the screen shots below:
    What am I doing wrong and what needs to be done to have all the updated Operating Systems and Microsoft Software added to my Product list?
    Thanks... Frank

    To follow on to narcoticoo's statement, have you actually initiated a catalog sync from within the ConfigMgr console yet? If so, has it completed successfully (you can check the moniotring workspace or you can watch the wsyncmgr.log).
    Jason | http://blog.configmgrftw.com
    Jason...
    I just ran a Synchronize Software Updates from ConfigMgr Console. I then went Monitoring -> Software Update Point Sync Status. It's showing my new WSUS server ( 2012 R2 ) but it's not showing any updates are being sync'd through it. See this screen shot:
    I then went to the wsyncmgr.log file on my site server which is the OLD WSUS server ( Win 2008 R2 ) and say this:
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=PREP-SCCM12.<domain.org> SITE=STA PID=5224 TID=4028 GMTDATE=Wed Feb 26 19:00:40.236 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site STA. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.236+300><thread=4028 (0xFBC)>
    Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.279+300><thread=4028 (0xFBC)>
    Setting sync alert to active state on site STA $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.313+300><thread=4028 (0xFBC)>
    Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.360+300><thread=4028 (0xFBC)>
    Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012\0048da55-f46f-4452-b4c1-37c0f295333b\IE9-langpack-Windows7-x86-xho.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.042+300><thread=4028 (0xFBC)>
    Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.067+300><thread=4028 (0xFBC)>
    Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012\000f8a0a-825c-457b-a15b-57ade145a09b\windows6.0-kb2653956-x64.cab, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.119+300><thread=4028 (0xFBC)>
    Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.144+300><thread=4028 (0xFBC)>
    Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012\10f3ec1c-f096-4a82-ae41-440ba5328467\Windows6.1-RTM-Client-NEUTRAL-X86.EXE, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.173+300><thread=4028 (0xFBC)>
    Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.199+300><thread=4028 (0xFBC)>
    Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30\17165524-99fa-49f7-91e6-457d43d4a48e\Windows-KB890830-V4.12.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.228+300><thread=4028 (0xFBC)>
    Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.254+300><thread=4028 (0xFBC)>
    It appears to me that when doing a Sync, it's still trying to use my OLD WSUS server instead of my new one. I removed the Software Update Point from the OLD WSUS server and uninstalled WSUS from it. I'm not sure why it's still trying to sync from the old
    server rather than the new one. Any ideas?
    Thanks... Frank

  • GE70 and Windows 8.1 Update

    Hi there,
    I was wondering if anyone has managed to update their GE70 running a pre-installed Windows 8 64bit to the Windows 8.1 that Microsoft rolled out.
    The update shows up in the Store but download doesn't seem to start.
    I tried downloading the ISO using my product key but apparently I can't use it to download a retail version.
    Any insight/advice would be much appreciated.
    Thanks in advance!

    Quote from: varche on 29-October-13, 09:00:39
    I was wondering if anyone has managed to update their GE70 running a pre-installed Windows 8 64bit to the Windows 8.1 that Microsoft rolled out.
    Sort of. I did not try the update on the pre-loaded Win8, in fact I formatted my GE70-20E within 5 minutes of opening the box and loaded a clean install of Windows 8 Professional.
    I then installed 8.1 the day it came out without any trouble since.
    I do know that if you'd loaded 8.1 preview you may have to start over, that is not a notebook or MSI thing though.

Maybe you are looking for