Gateway will not correct.

got my home monitoring equipment today and can't get the Gateway to connect any suggestions?

1. Keep trying.
2. It took me 10 to 20 tries to get some of the devices to work.
3. I found three sets of instructions for some devices that contradicted each other.
4. Try doing installation steps in a different order.
5. Sometimes the portal reports unsuccessful add device when it actually did add it.
6. Reload the portal pageor log out and back in after attempting to add a device.

Similar Messages

Firefox will not correctly play any videos

Firefox 3.6.6 will not play any videos correctly. The audio is fine but the video is just blurry, colored smears.
== URL of affected sites ==
http://www.youtube.com

I have the same problem in that videos are no longer playing correctly as of 3.6.6 but I am using Vista.
On youtube, videos are loading much more slowly then they were previously, I also notice that I can't play videos very well at all if I have more then one open in multiple tabs. Also, when I go to fullscreen it will either freeze up on full screen, play but I lose controls, play for a little bit and then freeze.
It's very frustrating.

My nano will not correct the memory usage HELP!

Okay...I filled my 2gb nano with approx 495 tunes, I then deleted a playlist which took the total down to 425, but the memory did not reset and nano will not allow me to add anymore tunes even though I just took 75 off! HELP ME PLEASE!!!!

Gina - If all you deleted was the playlist inside the nano, the original library of music will still be present. Try highlighting the nano in the source list on iTunes and selecting all the songs you want to delete from there.

IOS 7.0.3 will not correctly "manually manage music and videos" any more?

So, on all my iOS devices, I have always used "Manually manage music and videos" to drag albums from my iTunes library to my iPhones.
I then use iTunes to delete the albums and replace them with others (I have a lot of music).
With the iOS 7.0.3 update -- if I delete songs on the phone in iTunes 11.1.2 -- they show (in iTunes) that they have been deleted.
However, the songs are still on the iPhone when I go back to the Music app.
Is anybody else seeing this? I filed this (as it wasn't an issue with 7.0, 7.0.1 or 7.0.2), but am wondering if I'm missing something terribly obvious all of a sudden...
My only options at this point are to manually delete songs on the phone individually or to delete *all* the songs from Settings -- neither of which is optimal.
I filed a bug on this, but wondered if anybody else ran across this and figured out how to fix it?

It looks as though I MAY have found a solution after playing with this since last night ... Let me know if it works for you!
I went through and deleted a few random songs through iTunes on the "On This iPhone" tab ... they still showed on my iPhone but not in the Music part on iTunes. I then clicked sync at the bottom next to the memory bar on iTunes and it seemed to have removed the songs from my iPhone.
However, my iPhone is saying I have 1 more song than my iTunes is saying which I still don't understand but if I can still manually manage my music I guess it's a small price to pay for the minor confusion.
Really getting tired of becoming a detective just to work my phone appropriately. Apple should really stop making all these changes and stick to what the customers know and like. Frustrated and annoyed customers won't raise their sales...

LaserJet will not correctly print Statement (5.5 in. by 8.5 in.) ((Alignment off))

Not sure if it's a driver problem, but the printer keeps printing the statement size as though it were loaded on the left of the tray. So it basically prints off the page. When I try to get around this issue by loading the paper on the left in the middle tray, the printer jams. When I try loading it in the bottom tray, it doesn't recognize that there's paper when it's loaded to the left. And obviously, when it's loaded in the center, it produces the same problem that loading in the middle tray does (the alignment is off). I doubt this issue is resolvable, and we'll probably have to go to FedEx Office to fix the issue.

Hey there ersbro. I recommend checking out this document to see if it helps resolve the issue: HP LaserJet 1160 and 1320 Series Printers - Troubleshooting Paper Feed Problems
If this does not resolve the issue I suggest posting in the Business forum since this is a commercial printer. Here is the link: HP Business Support Forum -- LaserJets
Best of luck!
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Having trouble with blue ant s 4 hands free system.it will not correctly voice dial. using a g3 s iphone.read that g4 and g3'shave problems with blue tooth.any suggestions?

having trouble with blue ant s4 and iphone 3g or 3gs. voice commands to call a contact bring up wrong contact or playes an a song. read there are problems with iphones and this device. any suggestions or fixs?

You welcome

Spellcheck finds misspelled words but will not correct them on right-click

Before I upgraded to FF4, if there was a misspelled word on a field, I could right-click the underlined word and suggestions would show up in my menu. However, since the upgrade when I right click the underlined word I get the standard right-click menu without any suggestions. The standard being "Back, Forward" etc.etc.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

FIXED (for me at least): iPhone 3gs will not sync with Gateway NV79

I’ve spent months trying to fix this miserable problem with getting my iPhone 3gs to sync with my new Gateway NV79. Gateway will not help. Their technical support is genuinely worthless. Microsoft blames Apple and Apple blames Gateway.
My old iPod Nano syncs to my Gateway NV79 without a problem. I’ve tried all of the proposed fixes but other posters with no success.
But I do believe I’ve discovered a real fix (for me at least). Here’s my setup:
• Gateway NV79 running Windows 7 64 bit edition
• iTunes 10
• iPhone 3gs running OS 4.02
The USB ports needs tweaking to get the iPhone 3gs to sync to the Gateway NV79. Follow these steps without your iPhone 3gs connected to the Gateway NV79:
Step 1: Go to Control Panel
1. Open Control Panel
2. Click Hardware & Sound
3. Click Power Options
4. Make sure Balanced is selected and click Change Plan Settings
5. Click Change advanced power settings
6. Expand USB Settings
7. Expand USB selective suspend setting
8. Change On Battery setting to Disabled.
9. Change Plugged in setting to Disabled
10. Click OK
Step 2: Go to Windows Explorer
1. Open Windows Explorer
2. Right-Click Computer (not your computer name)
3. Click Properties
4. Click Device Manager
5. Expand Universal Serial Bus Controllers
6. Right-click first Generic USB Hub
7. Click Properties
8. Click Power Management
9. Uncheck Allow the computer to turn off this device to save power
10. Click OK
11. Right-click second Generic USB Hub
12. Click Properties
13. Click Power Management
14. Uncheck Allow the computer to turn off this device to save power
15. Click OK
16. Restart your computer
After your computer restarts, login and connect your iPhone.
You must complete both steps. Step 1 is required for Step 2 to stick.
There are a few things that may happen. iTunes may start syncing immediately and fail with an error. Don’t worry. If the sync fails the first time, restart the computer with the iPhone still connected. Now, iTunes will either take you to setup screen to connect your iPhone or the sync may restart. In my case, the setup screen came up and I DID NOT CHOOSE TO RESTORE. Pick the first option to add your iPhone. The sync will restart and may or may not finish. Don’t worry, if the sync fails, restart your computer again with the iPhone still connected and this time the sync will work.
Here’s the problem: the iPhone 3gs will not sync with the power management enabled for the USB ports on the Gateway NV79.
Good luck.

If you cannot update your computer, you will not be able to sync your phone. The requirements are:
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download from www.itunes.com/download)
iTunes Store account
Internet access

Norton utilities claims version 24 has adware in it and will not show some URLs and disables other URLs.

after upgrading to version 24 Firefox for windows, the Norton tool bar is incompatible with Firefox, no big deal I did not like it anyway, disabled it.
But when Norton Antivirus went and scanned my system it comes back with the message that Firefox has Adware in it and must be removed.
Firefox now will not correctly display some URLs that I use Particularly the WWW.wunderground.com ones and others are just disabled. These are ones that I use with my Weather-station hobby. I am not sending this from the machine that has Norton installed but my work machine, I can work on this later when I get home.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

IMac will not boot, hard drive file problem? Can't install OS in 2nd part.

The iMac will not boot. The Apple displays on the screen, the cursor spins for awhile, and then it loops into a reboot effort.
Last night, I was doing a lot of custom file sharing settings using the include enclosed folders option at the bottom of the Get Info window.
Question 1: Could that file sharing process have messed things up?
In an effort to get things going........ A few weeks back, I used Disk Utility to create a 2nd partition, with the intent of installing Ubuntu Linux there. I never attempted the install, as far as I can remember, while playing with the Ubuntu Live CD. So, I thought I would install 10.5.6 from the CD in the 2nd partition. But I get an error message that says "The installer could not create the folder "/Volumes/Ubuntu 9.10/BaseSystem.pkg.161nDNDdQ.""
Question 2: I also shared that partition, could that have caused the OS install failure?
Question 3: If I understand the book correctly, I can try to install the OS from the CD on the 1st partition, and not lose my data, correct? Unfortunately, I don't have any backup for the data, as I don't own any drives large enough yet to accommodate the data on the drive.
Question 4: Anyone have any other thoughts as to what ent wrong?

Hi, Grant.
Sometimes, it just pays to think on a problem. I awoke thinking, if it will boot the OS X install CD, it ought to boot my Ubuntu Live CD. And then, maybe I can change permissions on the first partition. As soon as I thought that, it occurred to me, if the problems are with the permissions, what if I used the OS X disk, and erased (formatted) the Ubuntu partition. That should set all the permissions on that partition back to default. Would OS X install then to the Ubuntu partition?
You better believe it did!! I'm typing this from the Mac after updating my 10.5.6 to 10.5.8 in the 2nd partition, and I'm booting from the 2nd partition.
I then did as you suggested, and from the Mac, I repaired the permissions to the first partition. But, the result was the same, there are a few permissions that do not match, and Disk Utility cannot, does not, or will not correct them.
I'm currently downloading the 10.5.8 combo update .dmg file. My thought is to burn that to a disk, and then install it over the version in partition 1. And trust that the current installation on partition 1 does not have any cross linked files that will destroy some data.
I do have some old ATA IDE drives I can hook externally to the Mac, and copy some of the information I have from the Mac to those drives before doing the 10.5.8 install.
Can you think of a better solution?

PDF viewer will not search

The new Firefox PDF viewer will not correctly search the text of PDF's which have text recognized. I switched the view of the document over to Acrobat and was immediately able to search as required. Can you fix?

Seems to be working for me.
Does this happen with all PDF files?
The latest version of the PDF viewer is available as an extension and does a better job than the 0.6.143 version shipped with Firefox 19 in a lot of cases.
You can find the latest version of the PDF Viewer (pdfjs) extension here:
*PDF Viewer: https://addons.mozilla.org/firefox/addon/pdfjs/
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Firefox will not download on my neoware m1000 windows xp embedded laptop

Firefox will not correctly install on my neoware m100 notebook, os is windows xp embedded and citrix. i have tried downloading and received an error corrupted file message or it just ends at extracting files
== This happened ==
Every time Firefox opened
== i tried downloading and installing firefox yesterday and today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)

I had this same problem on a Wyse V90LE Thin-Client running XPe. It ended up that my TEMP & TMP environment variables were set to Z: which was a 30MB RAMDRIVE.
You might try changing your TEMP & TMP environment variables to some drive that has plenty of space. (100 MB did it for me) Go to CONTROL PANEL > SYSTEM > ADVANCED TAB > ENVIRONMENT VARIABLES BUTTON and change the value of both TEMP & TMP.
Hope this helps!

Yosemite is locking my keyboard! When I start or retrieve a document the mouse will operate and I can highlight a word in Word but the keyboard will not type. I have had this start since the very first opening after updating.

I open a document to edit in Word 2013 (which shows as Word 2008) and try to save the document as a different one. The optical mouse on my MacBook Pro operates normally. Then I make the corrections as try "Save As". The screen opens and I can navigate to the folder and press "Open". I give it a name and the summary page opens to the text lines and I try to give it a new title. The keyboard does not respond and I have to cancel. I have automatic updates on and I get no update messages from Apple of Microsoft.
Anyone else havng same issues? This misspelled word will not correct by using the old method of right clicking and getting suggested corrections. it highlights but will not correct nor can I place the cursor on the exact place in the word (between the V and the n) to insert the missing "i".

Microsoft released Office for Mac 2011 update 14.4.5 for Yosemite compatibility. They are not motivated to do so for Office for Mac 2008, as it is an unsupported, end-of-life product.
Can you work through the process you described on another person's MBP with Office for Mac 2011 update 14.4.5 installed to determine if the problem you encountered is reproducible there?

T3 will not focus.

My Rebel T3 will not focus in manual or auto it just won't lock on, any suggestions before I send it to Canon...

Hi Jenette,
Hopefully we can help get you sorted out. But I confess I'm a bit susicious that this is a case of not understanding how to control the camera when you say it wont focus in manual.
The camera does not focus in manual. If you use manual then you have to use the focus ring on the lens to focus it yourself. The only factors that can control focus in manual mode are you... and the lens (if the lens was somehow jammed then it could be conceivable that the lens would refuse to come to focus even if you are operating it correcty.) But you mentioned you tried a number of different lenses and it's extremely unlikely that all of them are broken -- and since it can't be the camera when focusing manually) I'm wondering how you are trying to control focus.
The focus motor is in the lens -- on a Canon auto-focus system it's always in the lens (Nikon has some models where the focusing motor is in the camera body but Canon has always put the motor in the lens). When the camera is being used normally with you looking through the viewfinder there is a tiny wheel in the upper-right corner of the viewfinder which controls adjustment for myopia. You can adjust this wheel to correct for the need to wear perscription eyeglasses -- it will only correct for being near-sighted or far-sighted and will not correct for astigmatism. HOWEVER... if this wheel is mis-adjusted it can appear that the camera is out of focus even when it's perfectly focused.
The camera actually has two different focusing systems. One uses "phase detect" auto-focus sensors and is only used when you look through the viewfinder (the typical way to use a DSLR camera). The second uses "contrast detect" auto-focus and is only used when you put the camera into "Live view" mode.
The camera DOES need adequate light to focus. If you are in a location with fairly low lighting the camera will not have enough light to adequately focus - this is normal and not a defect. Take the camera to a location with plenty of light -- such as outdoors... during the daytime. The focus system SHOULD work fine if there is plenty of light.
Tim Campbell
5D II, 5D III, 60Da

IOS "Remote" 2.2 app not correctly entering AppleTV2 Netflix password

Problem: iOS "Remote" 2.2 app will not correctly enter AppleTV2 Netflix password from the iPod/iPhone qwerty keyboard.
Workaround: Tap characters on the AppleTV2 display.

You are not alone. I tried all the fixes, multiple times, but nothing worked.
I think there's nothing to do but wait. The fact that many of us are experiencing the same problem with the iPad Remote app, and the fact that the iPhone Remote app still works fine, tells me it's a glitch in the software - maybe Apple TV 5.2, maybe iOS 6.1 (I updated to both yesterday).
Meanwhile, since Apple does not read these forums, I suggest we all leave comments on their feedback page: http://www.apple.com/feedback/appletv.html
That way they'll at least know a bunch of us are having this issue.
Hopefully Apple will issue a fix soon.

Gateway will not correct.

Similar Messages

Maybe you are looking for