GE 31591 cordless and unable to make unlimited cal...

I just purchased a GE 31591 and have completed all the setup and signed in to my account. I have an annual subscription for unlimited calls to landlines and cell phones for the US and Canada. Therefore I do not purchase nor do I need Skype credit.
Whenever I try to make a call to a contact and choose a SkypeOut call the next screen informs me that my Skype balance is low. I then try to connect. While connecting the call ends. 
I cannot see how to remedy this. It appears to not be recognizing my account balance/subscription although I am signed in.
Please help. Many thanks in advance.

vf-xx wrote:
Yes, I am 100% sure. I've also stumbled on to a solution. The phone came with a free credit to make outbound calls. I've loaded that, now that the phone sees that my account has money attached to it, it'll make SkypeOut calls. And my account balance is not used, because of the subscription.
Honestly it's a very annoying and silly issue.
Please contact GE about this here: http://www.gephones.com/support/contact-us/
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Similar Messages

  • This Apple ID is now locked and unable to make any purchases.

    This Apple ID is now locked and unable to make any purchases.
    To recover your Apple ID, contact Customer Support.
    There was an error in the App Store. Please try again later. (100)

    There was an error in the App Store. Please try again later. (100)

  • This apple id is now locked and unable to make any purchases. To recover your Apple ID, contact Customer Support.

    This apple id is now locked and unable to make any purchases.
    To recover your Apple ID, contact Customer Support.

    Use the email form here >  Apple - Support - iTunes Store - Contact Us

  • TS2446 "this apple ID is now locked and unable to make any purchases." how do i change this!

    "this apple ID is now locked and unable to make any purchases." how do i change this!

    https://www.apple.com/support/contact/

  • TS3297 Apple ID is locked and unable to make purchases

    When I try to puchase an Album I get an error that says "Apple ID is locked and unable to make purchases"

    Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If it then works on your computer's iTunes but not your iPad then try logging out of your account on the iPad by tapping on the id in Settings > Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on it

  • Apple id is now locked and unable to make purchases

    Apple id is now locked and unable to make purchases

    If changing your password does not work, then contact itunes support

  • HT1920 my account is locked and unable to make puchase

    my account is locked and unable to make purchase

    If your account id disabled, then depending on the reason, you might be able to re-enable it via this page : http://appleid.apple.com
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
    If you can then use your account on your computer but not your iPad, then try logging out of the account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

  • PM8M-V updating ESCD and unable to make a warm reboot

    I have a problem with my PM8M-V motherboard.
    Almost everytime when the computer boots it says
    updating ESCD.....(about 20 seconds)...success
    building DMI pool ......(another 25 seconds)....Flash ROM protected
    and then Windows loads. Sometimes Windows hangs during loading and I have to press the reset button to reboot.
    Then it works almost OK with some exceptions:
    When the computer starts like this it is impossible to make a (warm) reboot. It comes to "closing windows" and then hangs, I have to use the reset button to restart it.
    The software sems to be unable to read information about the hardware, for example MSI info tool and Live Update can't read information about motherboard and BIOS.
    I have found that if I disable OnChip SATA in BIOS the computer sometimes (maybe one time out of ten) starts in the right way (no updating of ESCD, it's possible to make a warm boot and MSI Live update detscts my MB and BIOS and works properly). If OnChip SATA is enabled and SATA Mode set to IDE I always get the updating ESCD message, Windows sometimes hangs during loading, it's impossible to make a software reboot and MSI's software can't detect my MB.
    I have flashed BIOS to V3.4, formatted the C: partition and made a fresh install of Windows but the problem persists.
    Anyone here who have any ideas?
    Ulla

    Hello
    I don't have the computer here now, I brought it back to the retailer.
    What is NVRAM and under what menu in the BIOS do I find it? I can't remember that I have seen it even though I think I have looked everywhere. What I do know is that sometimes during the boot I have got the message NVRAM protected instead of Flash ROM protected (and then I have the same problems).
    Even during the Windows installation the computer didn't restart automatically, I had to use the reset button.
    The PSU is part of an AOpen housing, I don't know what brand it is, according to the box it is "300W/PFC Power".
    I haven't payed much attention to voltages, but I have noticed that 12V varies slightly between 11.9 something and 12.04 (I think), and then something is usually around 5,12 and the third maybe 3,47, but I'm not 100% sure I remember correctely.
    The hard drive is primary master and the optical drive secondary master. If I enable the SATA controller they are listed as IDE channel 0 and 1 (IIRC).
    I am not very good at theese hardware things. I had the computer built for me (by the technician at the retailer's, so I trust that it is done properly). Motherboard, PSU, optical drive and card reader are new. CPU, hard drive, graphics card and memory are previously used in a Shuttle.

  • Random restarts and unable to make/receive calls o...

    Okay...has anyone else experienced this problem before.
    No problems with all the regular app functions, speed, sound and everything all normal. Except that no calls can come in or out. When calling out, it will show the whole dialing screen, but there will be no dial tone and sometimes the call duration timer will start but i wont be able to hear anything. When someone tries to call in they get the same tone as if the phone is off, and I won't receive any message of a missed call or anything of that sort. I check cell reception, full bars, My Maxis In my case, all seems to be normal.
    Only way to solve this is to restart the phone. Then everything returns to normal, calls in and out fine.
    Happens to me maybe once a month...
    also random self restarts...I might be listening to music while travelling on the LRT and then it will just vibrate and restart. Or at work its just on the table and then it just short vibrate and restart itself...
    one more issue is that some of the tiles on my homescreen don't load immediately and lag for 1-2 seconds before the image shows. This happens when I am scrolling up or down and all I see instead of the live tiles are blank tiles of the color I set it to. This only started happening after the tango update. i doubt this is caused by the phone and instead by the software. it does not affect the respective apps or anything else.
    Just informing Nokia of these issues with my lumia 710... I will try a hard reset soon to see if this will solve the problems for good.

    What phone?
    What zip code?
    What have you tried to troubleshoot the problem?
    Have you powered it down and restarted?
    More information would be helpful.

  • I am trying to buy a game and it says purchased failed because my Apple ID is now locked and unable to make purchases how do I fix this?

    I Am trying to buy a game and it is saying my Apple ID is locked how do I fix this

    If you are getting a message that your account is disabled then you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    You might then need to log out of your account on your phone by tapping on your id in Settings > iTunes & App Store and then log back in so as to 'refresh' the account on it.
    If that doesn't fix it, or if the message is that it is locked, then contact iTunes Support and see what they say : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I am unable to make any purchases in the App Store. PLEASE HELPPPP!

    I am unable to make any purchases in the App Store. I have $15 in the account but I still can't buy any games. It only lets me purchase free games. It says "this Apple ID is now locked and unable to make any purchases"

    You are in the same country as you have on your iTunes account, and you haven't been trying to use another country's store ?
    Try contacting iTunes Support (these are user-to-user forums) and see if they can/will unlock it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • My phone just has searching... up in the top left hand corner and it has been like this for 4 hours now! i am unable to make calls or texts. what should i do? It is an iphone 5 by the way

    my phone just has searching... up in the top left hand corner and it has been like this for 4 hours now! i am unable to make calls or texts. what should i do? It is an iphone 5 by the way

    Take a look at this link, http://support.apple.com/kb/TS4148

  • I installed the new google maps app and I am unable to make it work because it says, cannot reach server. I have a iphone 4 with 6.0.1 up to date. Please advise where I can locate to chech if my location is turned on.

    I installed the new google maps app and I am unable to make it work because it says, cannot reach server. I have a iphone 4 with 6.0.1 up to date. Please advise where I can locate to check if my location is turned on.

    i found a solution for this issue when google maps shows you an empty map error message cannot reach server. Click on  the icon next to search and you are supposed to be presented with your profile, if not u will have an empty space. click on that space, then the "gear " Icon and logout.
    restart your iphone then strat google maps again and log back in.
    apparently this is happening when you change your google acount password or enble or disable 2 step verification.

  • I am unable to make or receive calls after the 6.1 update.  I have restarted, restored and reprogrammed without any positive results.

    I am unable to make or receive calls since I completed the 6.1 Apple update.  I have restarted, restored and reprogrammed without any positive results.  I hope that someone can assist me.
    Thank you in advance!  I appreciate your help!

    Thank you!  I went to the Verizon Wireless Store and everything is okay with regard to my carrier.

  • I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

    I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

    I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

Maybe you are looking for

  • Something like SY-INDEX or SY-TABIX

    Hi. is there predefined variable showing counter of LOOP step?

  • Error the port of the service registry

    Dear everyone, please help me, i got the error message as below: Information for this WSDL portType has not been obtained successfully. Some errors have occured. (E.g. some of the parent entities might be corrupted or unpublished.) Error message: WSD

  • To the Hosts or Administrators of this forum

    I posted a simple logical question that was/is well within any License Agreement and is common knowledge among any Apple Enthusiast, User, or Geek like myself. The question asked about installation of the much needed and highly anticipated updates to

  • Create an account and connect to the server

    This question was posted in response to the following article: http://help.adobe.com/en_US/flashmediaserver/amazonec2/WS6fc2df2b6d2ce24359910e2812c396a83 eb-7fff.2.html

  • Query with a condition - Overall results row is wrong

    Hello, I have a query that uses a condition.  The query gives me the top 10 brands according to the Net Sales.  The query itself runs fine.  I just noticed however that the Overall Result row isn't giving me the correct number. For example: <b>BRAND