GE620 DX, Nvidia card not working properly

Hello everyone,
Nvidia support sent me here since updating drivers didn't solve my problem.
To be honest, I'm not really computer savy... I've been sticking to consoles my entire life because it's always felt like an easy option. Because of my lack of experience I'm not the first person to notice when a computer isn't performing the way it should, therefore it has taken me a while to realize that the Nvidia Geforce GT 635M (2GB GDDR3) card has reset the settings to use the integrated graphics card instead of the Nvidia card (LOL).
Readjusting the settings doesn't work. The window will freeze for about 2-5 seconds, then refresh and the settings will be back to integrated card. Also, I downloaded new drivers from Nvidia, but the installation failed.
EDIT:
The power button is red, not blue (opening task manager does not resolve this).
Nvidia control panel isn't working. When I try to use it I get a message saying I have no monitor connected to the Nvidia GPU.

Hello, i'm on laptop:
Lenovo Y580 (i7 2300Mhz, 8Gb DDR3, GF 660 2Gb DDR5, 256Gb SSD, Windows 7 / Windows 10 TH)
At first i was using default driver from windows th, but some games (styx / bioshock) won't even launch, clicking on exe file didn't do anything. Then i've updated driver:
intel - 15.33.30.64.3958
nvidia - 344.60
And now these games are working, but they are only on intel. I tried to force nvidia in several ways, but no luck. Though some other apps (3dmark06) are working on nvidia card. 
And switching game to dx9 (where it possible) solves the issue.

Similar Messages

  • Airport Extreme Card Not Working Properly (Web Browsing Slow)

    Hello people of apple discussions,
    I have the original MacBook Pro with Mac OS X 10.5.7 installed on it. And I have a problem, my airport extreme card is not functioning properly like when I go on the internet, it comes up with the server "www.google.com" cannot be reached or the same with Yahoo! Back when it had 10.4 it was functioning properly with very high speeds. But, all the other PCs in the house gets good internet even my iPhone and the router is functioning properly. It's been like this since for about 6-8 months and i am very upset with my mac!:|So can I have some help or any suggestions!
    Message was edited by: mr.ts

    Have you tried contacting your ISP? Sometimes they can help you optimize your settings. Such as DNS server numbers. I had a simullar problem and found out my DNS settings were wrong.
    Do you have other computers that use the wireless single? If not you might look into your router to see if maybe something is wroung with it. You can always go to a wifi hotspot or a friends house and see how the connection is there. If it seems normal then you know it is your ISP or your router. If not then it might be a laptop problem.

  • Nvidia optimus not working properly

    Hello, i'm on laptop:
    Lenovo Y580 (i7 2300Mhz, 8Gb DDR3, GF 660 2Gb DDR5, 256Gb SSD, Windows 7 / Windows 10 TH)
    At first i was using default driver from windows th, but some games (styx / bioshock) won't even launch, clicking on exe file didn't do anything. Then i've updated driver:
    intel - 15.33.30.64.3958
    nvidia - 344.60
    And now these games are working, but they are only on intel. I tried to force nvidia in several ways, but no luck. Though some other apps (3dmark06) are working on nvidia card. 

    Hello, i'm on laptop:
    Lenovo Y580 (i7 2300Mhz, 8Gb DDR3, GF 660 2Gb DDR5, 256Gb SSD, Windows 7 / Windows 10 TH)
    At first i was using default driver from windows th, but some games (styx / bioshock) won't even launch, clicking on exe file didn't do anything. Then i've updated driver:
    intel - 15.33.30.64.3958
    nvidia - 344.60
    And now these games are working, but they are only on intel. I tried to force nvidia in several ways, but no luck. Though some other apps (3dmark06) are working on nvidia card. 
    And switching game to dx9 (where it possible) solves the issue.

  • Beam Internet/Laptop Connect Air Card not working properly

    We recently upgraded to the ATT Beam aircard as we lost our previous version on vacation. We live in a rural area and using the Laptop USB Connect Card (Beam) is the only access to the internet. When we first activiated it we were able to connect to the internest the first couple of days (Windows 7). Now, the digital read out on the Beam shows "Ready to Connect" but when opening the All Access icon to connect, we either get a "no modem/device detected" or it will say its connected on All Access but the Beam show Ready to Connect and we have no access. I've run the diagnositic too, I've deleted All Acess and reinstalled, I've unplugged and plugged the Beam back in, nothing works, I have not been able to connect to the interet with it at all. I am currently teathering off my cell phone. I'm locked into a 2 year on this Beam since I upgraded and so far its not working. Thoughts?

    Hello @njames
    I’m sorry to hear you’re having issues with your Air Card; I’d be glad to help you out!
    If you could please send us a private message providing your
    Full name
    Wireless number
    Best time to contact you and alternate number if available
    We will reach out to you within 2 business days.
    Thank you,
    Charise

  • Wifi card not working properly

    I purchased an hp Envy in October 2014. The wifi card no longer functions properly.  Connections are intermittent or so slow they don't function.  Is this defect covered by warranty?  The wifi card is Qualcomm Atheros AR9485 802.11
    As long as I'm hard wired, I have no internet connection issues. But dysfunctional wifi limits mobility and eliminates one of the primary features that I relied on in making the purchase choice.  What is the solution?

    Hi @2014Envybuyer,
    Welcome to the HP Forums!
    It is a superb  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that you have an issue with your wireless.
    Here is a link to  HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) that should assist you.
    If the issue remains please contact HP support for further assistance or service.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Other Device/Sound Card not working properly

     My sound card keeps failing. I can restart my computer and it will work fine for a random amount of time. But usually I'll be running youtube or soundcloud and the audio will just stop. The video will stop and no longer play.  I can try video files on my computer and they won't even play on Windows Media Player. I try in VLC and the video will play, but not the audio.  I've tried every driver known to the HP driver update process, I've tried updating the Intel Chip the Bios, everything.  I'm out of options. Can you help? 

    Hi: You need this driver for the unknown device and you may have to manually install it by browsing to the driver folder. http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66231.exe The only suggestion I can offer for the audio is if your model has the Realtek HD audio system, accept the agreement, download and install the second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false

  • External audio cards not working properly

    First off, i have an HP Dv7-1134us laptop.  AMD 2.0 GHZ dual core processor, 4 gigs of ram, etc etc.  I have 2 external audio cards:
    1.Presonus Firestudio Mobile(firewire)
    2.Line 6 UX1(usb)
    I had an HP desktop before that I used for recording, but that recently broke down so I have been trying to use my laptop.  I bought a Firewire express card for the presonus, and installed everything along with it.  However, while my computer recognizes the device, it will consistently turn off and on...but no audio comes out. 
    The Line 6 ux1 works, but it crackles and pops at a ridiculous rate.  When recording more than 1 track, it clutters up my speakers with nothing but crackling and distortion.
    I have tried an Express Booster for the first issue, have tried disabling my LAN card, have tried disabling IRQ's in the control panel and nothing has changed.  Can ANYONE help me or am I going to have to really jump ship and just get a mac?

    Sorry about the delay in replying....
    The updated ATI drivers that should apply to my machine are at
    http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx
    or the file I was originally pointed to
    http://sites.amd.com/us/game/downloads/Pages/integrated_win7-32.aspx#3
    but these won't install here, neither will any other updates from ATI, even older ones.
    I'm waiting for a family member to bring round his Win 7 64-bit machine as I want to compare the Microsoft files referred to in the failure messages on his machine with mine.  I'm trying not to have to re-install Windows.....
    I think the recording tab effect is just a Microsoft programming problem that happens to show up the fault in the ATI usb part of the motherboard chipset drivers, and I think it may appear because the little recording meters that appear are driven by some recording code of Microsoft's. Here using a powered or unpowered usb2 hub cures the problem as it moves the translation between usb 1 and usb 2 away from the faulty code in the machine.
    It's interesting that I've been posting all over the place for many, many months about this and had no response anywhere until about 10 days ago and now there have been 2 responses. It will be really good if you can confirm that a usb 2 hub and/or the ATI update cures the problem.
    I think you may find there are some remaining crackles which can be got rid of by disabling any wifi networking on the machine.

  • 3rd party usb2/firewirePCMCIA card not working properly after 10.4.6 update

    Hi,
    I updated my mac to 10.4.6, after which I can no longer use my generic usb2/firewire PC card to sync my iPod via usb 2.0. My iPod (60gb photo) will still mount, but any app that tries to access the iPod portion of the drive (e.g. iTunes or the iPod updater) freezes until I detach my iPod. For some reason it's only a problem with usb2.0 slots, because I can connect the iPod via the card's firewire port with no problem.
    Was there any modification to generic usb 2.0 PC cards in the new OS update?
    Any ideas?

    I think that I have a similar problem, having recently bought a PCMCIA to USB2, thanks to Apple's strange decission to drop FireWire from iPods (although that is a thread of it's own) but it does not recognise the iPod at all, using X.4.7.
    It is a NEWlink model, which appear to be the same as D-Link and some others using the ALi chipset, and using the 'latest' (Oct 2003) driver USB2EHCI v3.1.5
    Curiously USB1.1 devices seem to be fine, and the iPod is powered and goes into Sync mode but fails to boot either on the Desktop or in iTunes.

  • Hp envoy m6 sound card, simmple pass applicatio​n and support assistant is not working properly

    i have hp envoy m61204tx.
    after upudate using hp support assistant sound card is not working properly also when i run hp simple pass or hp support assistant only start window appears then it hides nothing happend next.
    please guide me what is the problem and how to solve it.
    any help will me much appriciated.
    Thanks.

    @alki,
    I understand that sound has quit working after support assistant ran a few updates.  
    Press Windows Key + X and select device manager.  The sound card should be listed in the sound section.  What status is displayed for the sound card?
    What is the status of the mute key on the notebook?  Does it have an amber light?
    What happens if you try to install this driver?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Flip Card Animation is not working properly when Button's PointOver State remain Activated.

     I am facing problems with flip car animation which is not working properly when its mouse point over state remains activated but it works perfect when its tapped two times and instantly change pointer position. Kindly Help me out as soon as possible.
    Code is here:
    Xaml:
    <Image Name="imgCapital" RenderTransformOrigin=".5,.5" Tag="1" Tapped="imgCapital_Tapped">
    <Image.Projection>
    <PlaneProjection RotationY="0"/>
    </Image.Projection>
    </Image>
    <Image Name="imgSmall" RenderTransformOrigin=".5,.5" Tag="2" Opacity="1" Tapped="imgSmall_Tapped">
    <Image.Projection>
    <PlaneProjection RotationY="-90"/>
    </Image.Projection>
    </Image>
    Storyboard:
    <Storyboard x:Name="FlipOpen">
    <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgCapital">
    <EasingDoubleKeyFrame KeyTime="0:0:0" Value="0"/>
    <EasingDoubleKeyFrame KeyTime="0:0:0.4" Value="90"/>
    </DoubleAnimationUsingKeyFrames>
    <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgSmall">
    <EasingDoubleKeyFrame KeyTime="0:0:0.4" Value="-90"/>
    <EasingDoubleKeyFrame KeyTime="0:0:0.8" Value="0"/>
    </DoubleAnimationUsingKeyFrames>
    </Storyboard>
    <Storyboard x:Name="FlipClose">
    <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgCapital">
    <SplineDoubleKeyFrame KeyTime="0:0:0.4" Value="90"/>
    <SplineDoubleKeyFrame KeyTime="0:0:0.8" Value="0"/>
    </DoubleAnimationUsingKeyFrames>
    <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgSmall">
    <SplineDoubleKeyFrame KeyTime="0:0:0" Value="0"/>
    <SplineDoubleKeyFrame KeyTime="0:0:0.4" Value="-90"/>
    </DoubleAnimationUsingKeyFrames>
    </Storyboard>

    Actually i simply want flip card animation which is not working here in my code. When i tapped button to invoke animation its behavior not exactly flipping.  Its one side work properly but other collapsed suddenly not rotate if i keep mouse right at
    the button, but if i change mouse pointer at that very time after tapping it works properly. Mouse Pointer Over mean screen points where i tapped.
    Triggered Function is here:
      private void btnChangCase_Tapped(object sender, TappedRoutedEventArgs e)
                if(isCaseChanged==false)
                    isCaseChanged = true;
                    FlipOpen.Begin();
                else if(isCaseChanged==true)
                    isCaseChanged = false;
                    FlipClose.Begin();

  • Satellite Pro U200: VGA output not working properly when AC adapter was connected

    Hi,
    I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
    thanks in advance

    As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
    The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

  • ESS is not working properly after upgrade from 4.7 to ECC6.0

    ESS Scenario in 4.7
    4.7 Scenario:
    The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
    List of Services used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
    1     Home Page     PZM3                                          Standard                 Service
    2     Inbox                     BWSP                                          Standard                 Service
    3     Calendar                     BWCA                                          Standard                 Service
    4     Whou2019s Who     PZ01                                          Standard                 Service
    5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
    6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
    7     Section 80C     PZ88                                          Standard                EWT
    8     Section 80                     PZ80                                          Standard                EWT
    9     Form 16                     HRESSIN_F16                          Standard                EWT
    10     Address                     PZ02                                             Standard                EWT
    11     Bank Information     PZ03                                          Standard                Service
    12     Open Appraisals     Not Available                           NA                                 Service
    13     Emergency Address     PZ05                                           Standard                 EWT
    14     Family/Dependents     PZ12                                           Standard                 EWT
    15     Personal Data     PZ13                                               Standard                  EWT
    16     Previous Employers     PZ28                                           Standard                 EWT
    17     Apply Leave     WS20000081                           Standard               Service
    18     Leave Overview     WS01000109                           Standard              Service
    19     Leave Balance     PZ09                                             Standard              Service
    20     Loan Application     ZLOAN                                          Customized              Service
    ECC6.0 Scenario:
    In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
    There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
    OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
    List of Services would be used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
    1     Home Page     PZM3                                       Standard                           service
    1)this service is not available
    2)SAP does not provide any replacement.
    3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
    4)Given reference of few notes.
    5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified  to access the services via URL or by OKCODE.
    Screenshot attached below.
    2           Whou2019s Who                 PZ01                                      Standard                             Service
    1)this service Available
    2)Not Working properly.
    3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
    7     Section 80C     PZ88      Standard     EWT     Available               
    8     Section 80      PZ80     Standard     EWT     Available               
    9     Form 16                HRESSIN_F16     Standard     EWT     Available               
    10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
    11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
    12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
    13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
    14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    16     Previous Employers     PZ28     Standard     EWT          Service Available          
    17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
    18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
    19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

    Ya ramakrishna,
    Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
    Please do the needfull,
    Julius

  • After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

    after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
    It is not practicale to do this always any one faces the same problem

    There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
    If no change with a new SIM card, the standard troubleshooting steps in order are:
    Power your iPhone off and on.
    An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPhone with iTunes from your iPhone's backup.
    Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
    If no change after any of these steps in order, your iPhone has a hardware problem.

  • Photoshop not working properly after new installation

    I have a brand new Dell desktop that runs windows 8. I installed the Adobe Creative Suite 5.5 Master Collection and got a message saying that there were errors during installation and some things might not work properly. I uninstalled and did it a second time. Same message.
    I then spoke with an  Adobe agent that helped me download a program to detect what the errors were. He said they were minor issues and shouldn't affect the programs. No help there.
    I then spent hours today speaking with Dell on the phone and the rep took remote control of the computer and did a diagnostics check on the hardware. He said everything is fine. I asked him if it might be the video card needing an update so he ran an update. Same issues, no change.
    We changed the compatability to windows 7 and still no change.
    I then uninstalled the creative suite and tried installing it from the desktop. Still same problems.
    These are the issues in photoshop:
    1)When using certain tools (transform tool, crop tool) the images goes completely black.
    2) The background switches at random- sometimes checkered, sometimes grey, and sometimes black.
    3) Color saturation is incorrectly represented. It switches whenever it wants. For instance, when I zoom in and out it changes.
    In Adobe Bridge some of the RAW images don't show in the program. Some I just can't open. Others open fine. Those images will open in Photoshop but not in Bridge.
    So I have no idea what to do and this is becoming extremely frustrating. I should add I haven't had any problems with Lightroom and it works fine as far as I can tell.
    What could be causing these issues? Could the install CD be damaged?

    I turned off the GPU in Photoshop's preferences as you suggested and everything seems to work properly now in Photoshop. In Adobe bridge the files are also all showing now and there doesn't seem to be the same issue there either.
    I also tried enabling the GPU and changing it to Basic and it continues to work, but when it is changed to advanced when enabled the problems arise again.
    So it seems as though the problem is with the video card or its driver as you said. I am not 100% sure that the Dell rep updated the driver from AMD but I am pretty sure he did. I did go to the AMD website and ran a program to detect if the driver needs to be updated and it resulted in a message saying that the driver is up to date and current.
    As you said this is just a temporary solution and I want to make sure I have a working GPU system. What do you think the problem is then? How would you suggest I proceed? Should I contact Dell and tell them the problem seems to be with the installed video card?

  • Eye Dropper tool in After Effects Not working Properly

    I am using Adobe After Effects CS5 on a mac. And most all of the eyedropper tools in the software are not working properly. They always select a way different color than it should be. What is wrong?
    One day they just all decided to not work. Its really frustrating. Its been a few weeks now.

    Well, For some strange reason its working just fine today. I did restart my computer yesterday and after that it seems to be working.
    I haven't recenitly messed with my hardware acceleration/graphics card or monitor color profile. So if that was it, then it did it on its own.
    None the less its working now. Thank you for your help!!!

Maybe you are looking for