Satellite Pro U200: VGA output not working properly when AC adapter was connected

Hi,
I have a problem with vga output. When I'm working on battery and connect my notebook to external monitor it's ok, but when I connect AC adaptor then start waving also bluetooth and wlan does not work properly. In other case when I remove battery from notebook and connect AC adaptor it works properly.
thanks in advance

As long as you use a CRT you should set the refresh rate new, at least 85Hz. Standard is 60Hz as far as I know, and that hurts in your eyes.
The wireless lan behaviour is quite normal as long as your not right next to the access point. On battery power the wireless lan card reduces its energy consumption thus the connection will be poor if you dont have a perfect signal. You can turn this off in the iNTEL Pro/SET wireless software, where you can configure the adaptor. Try to change the powersafe mode to manual and full power, this should solve your problem.

Similar Messages

Satellite A210 (PSAELE) - VGA output not working

Hello everybody,
i've got an A200 PSAELE and I am trying to connect it to an external Monitor via VGA.
The external Monitor is a Medion 19" Widescreen with a Resolution of 1440x900.
The problem is, that I am not able to get the external display to work.
I just get a "no signal" message on my external monitor.
I tried various things, tried another VGA cable, another monitor (Benq FP93G X) and another driver.
I am using Windows 7 Beta ans also tried to get it to work using Windows Vista Home Premium & Windows XP.
In the "resolution settings", I tried using the "recognize displays" button.
When i use it, there is a second image of a display displayed like a box.
In this box, there is the following text: "Antoher display couldn't be recognized".
Regardless of the settings I use (clone, span, ...) I can't get any image onto my second screen.
I tried changing some BIOS-Settings without success and made a BIOS-Upadte to Version 2.00, same problem.
I also tried switching to the external monitor via "Fn + F5", but nothing happens onto the second screen.
Can anyone help me?
Thanks in advance,
StarGeneral
Message was edited by: StarGeneral

Hi,
I tested two more things:
-> I downgraded to the Toshiba Windows Vista Home Premium 32bit drive, which works on Windows 7 as well. There in the Catalyst Control Center I've got the "Displays Manager" section, which I don't have with the release drivers.
But even there, when I click on "dectect displays", nothing happens.
When I press the Windows-key and "P", a display opens, where I can select how to use the external VGA out, but when I e.g. select "clone", the resolution on the laptop-screen changes, but there still is no signal on the external monitor.
-> I tested the laptop with a real CRT analog monitor, but I didn't get any further.
But I have got the sneaking suspicion, that I've got a conflict with the HDMI / VGA version of the A210 laptop.
I know that there are a few laptops with an HDMI output and a few with a VGA output.
I checked my audi-devices and found an entry named "HDMI-Audio-Out".
Isn't that strange, because my laptop doesn't have HDMI connector?
Probably I've got a Mainboard/Graphics-card combo, which has got a HDMI port and no VGA output and which was designed for a HDMI-A210?
Could something like this be possible?
Thanks in advance,
StarGeneral

My macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing.

my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing

Gray, Blue or White screen at boot, w/spinner/progress bar

I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?

I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?

Hi,
Have you tried the help documents below:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
In case of any other error message, please specify.
Regards,
Sheena

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Swf is not working properly when upload to server

I develop 1.swf which is having 3 buttons each one having
anather .swf to call 2.swf, 3.swf respectively.
This application is running perfectly on my PC, but
While uploading the swf to server the 2.swf and 3.swf is
not running. Can any one tell how to recover from this kind
of problem.

justbipin wrote:
> basically my code working perfectly,
> but its not working properly when upload to server
> can anybody having any ref. or link to solve this
issues.
why is that we insist on seeing the source file ?
There is no one way of doing things in flash and no one can
help
you based on "does not work description".
This is way to broad of a subject to even try to guess.
Same as asking "my car does not work, what's up with
that"....
Please upload the problematic file and provide url for us to
check.
Otherwise you need to try to troubleshoot it yourself as we
can't
guess from here what possibly is wrong with that file.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

TS1630 My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

My Iphone 4s reciever is not working properly, when i call someone from my iphone 4s. can any one help me how to solve this problem?

You might like to define "not working properly".

Application does not work properly when I press a CommanButton

Hi all, I am having a problem with weblogic 10.3.5.
It turns out that an application built with JDeveloper 11.1.5, I test it, and everything goes well in the JDeveloper integrated Weblogic.
But when deploy in a standalone weblogic 10.3.5 server, the application does not work properly when I press a CommanButton to go to another page search (the property "action" is set correctly) , but nothing happens, stays in the same home page. Similarly when a commanButton link to run a task-flow, It do not work , however in the JDeveloper integrated Weblogic it runs correctly.
How I can solve these problems?
Thanks.

Thanks Frank for help us, but when I writing this comment we are doing at home. So, we going to test the page in a stand alone weblogic server 10.3.5. We wrote the URL as :
" http://<our ip>:7001/myApp/faces/index.jspx "
this application contains a report desing and compiled with iReport 4.5.1 ( last version in the moment ), we can see the report when I press a commanButton without any problem.
But now, we need try your suggestions in the office, and give you more information about it . Thanks for the moment.
In the Afternoon we gonna give you more information about it .

Flip Card Animation is not working properly when Button's PointOver State remain Activated.

I am facing problems with flip car animation which is not working properly when its mouse point over state remains activated but it works perfect when its tapped two times and instantly change pointer position. Kindly Help me out as soon as possible.
Code is here:
Xaml:
<Image Name="imgCapital" RenderTransformOrigin=".5,.5" Tag="1" Tapped="imgCapital_Tapped">
<Image.Projection>
<PlaneProjection RotationY="0"/>
</Image.Projection>
</Image>
<Image Name="imgSmall" RenderTransformOrigin=".5,.5" Tag="2" Opacity="1" Tapped="imgSmall_Tapped">
<Image.Projection>
<PlaneProjection RotationY="-90"/>
</Image.Projection>
</Image>
Storyboard:
<Storyboard x:Name="FlipOpen">
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgCapital">
<EasingDoubleKeyFrame KeyTime="0:0:0" Value="0"/>
<EasingDoubleKeyFrame KeyTime="0:0:0.4" Value="90"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgSmall">
<EasingDoubleKeyFrame KeyTime="0:0:0.4" Value="-90"/>
<EasingDoubleKeyFrame KeyTime="0:0:0.8" Value="0"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>
<Storyboard x:Name="FlipClose">
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgCapital">
<SplineDoubleKeyFrame KeyTime="0:0:0.4" Value="90"/>
<SplineDoubleKeyFrame KeyTime="0:0:0.8" Value="0"/>
</DoubleAnimationUsingKeyFrames>
<DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Projection).(PlaneProjection.RotationY)" Storyboard.TargetName="imgSmall">
<SplineDoubleKeyFrame KeyTime="0:0:0" Value="0"/>
<SplineDoubleKeyFrame KeyTime="0:0:0.4" Value="-90"/>
</DoubleAnimationUsingKeyFrames>
</Storyboard>

Actually i simply want flip card animation which is not working here in my code. When i tapped button to invoke animation its behavior not exactly flipping. Its one side work properly but other collapsed suddenly not rotate if i keep mouse right at
the button, but if i change mouse pointer at that very time after tapping it works properly. Mouse Pointer Over mean screen points where i tapped.
Triggered Function is here:
private void btnChangCase_Tapped(object sender, TappedRoutedEventArgs e)
if(isCaseChanged==false)
isCaseChanged = true;
FlipOpen.Begin();
else if(isCaseChanged==true)
isCaseChanged = false;
FlipClose.Begin();

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing it again on my new computer?

I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing photos for a website I was adding to. I now have a new computer which runs windows 7. Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.

Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

Satellite Pro U200: VGA output not working properly when AC adapter was connected

Similar Messages

Maybe you are looking for