Geeting the following complation error in the view controller in webdynpro
Not able to import the follwoing file in the import statement. Can u tell me what is the reason behind this.
import is.eimskip.comp.wdp.IPrivateSOdetailView
I will take a wild guess:
MGT2.VW_PRINT_026
Is a materialized view too.
This error means that while doing a refresh to VW_MAT_026 it
source mv, the VW_PRINT_026 wasn't exists, i.e. has been in the refresh process.
You didn't get it in Sql*Plus because you are doing it step by step.
The solution - make sure that VW_PRINT_026 completed it refresh before doing
The VW_MAT_026 refresh, e.g.
not tested-
begin
dbms_snapshot.refresh('VW_PRINT_026');
dbms_snapshot.refresh('VW_MAT_026');
end;Another option - the VW_PRINT_026 is a table created "on the fly"
And in some scenario - the table isn't exists yet...
If this is the case you should check if the object exist before doing the
VW_MAT_026 refresh, e.g.
not tested-
declare
ll_exists number;
begin
select 1 into ll_exists from all_objects where owner ='MGT2' and
object_name ='VW_PRINT_026';
dbms_snapshot.refresh('VW_MAT_026');
when others then raise;
end;Amiel
Similar Messages
-
View and View controller in WebDynpro component.
Dear SDN Community,
I don't see anything like View controller in the webdynpro component. In the WebDynpro component I see only View but no View Controller. Is it that in the webdynpro component view and view controller are physically same and when you swtich to the layout tab its the view and the rest of the tabs for the View controller. May be a stupid question but I would appreciate your clarification here.
Thanks!
SuryaYes, they are to some degree merged in the IDE. For example, there is only one Java source file for view and view controller. The metadata on the other side are stored in different XML files.
Armin -
What are the reasons for following Javascript error in Report Viewer
Post Author: dhuka
CA Forum: Crystal Reports
Hello Everybody!
I am using Crystal Reports 10 in my web application. But unfortunately I am surrounded with strange problem related to it because of which I have been unable to deploy is on client-side. In my application the error given below is displayed as javascript error in Report Viewer and report is not displayed. But more frustrating part is that I am getting the same error due to different problem with reporting and I am stuck with it as I am unable to figure out what's causing the error now. Earlier this error appeared due to problem with parameter passing to stored procedure which I resolved it and error vanished but once again it has shown up. Moreover this error now appears less frequently and randomly therefore it is even difficult to trace the cause.
Problem with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
Line: 40Char: 12Error: Expected ')'Code: 0URL: http://myServer/myApp/myForms/myReports/ReportViewer.aspx
So can anybody tell me what factors might be causing this errors as the error text is very vague in nature and gives no idea about the actual error.
Guys, I hope for your kind co-operation.
Regards,Post Author: dhuka
CA Forum: Crystal Reports
Thanks for you reply Krishna.
But this syntax error is the one that is creating problem for me as I cannot trace it. The form ReportViewer.aspx contains only a report viewer object which remains un-binded to any ReportDocument even at runtime.
At code behind ReportViewer.aspx I have code below that associates SQL Stored Procedure Parameter and Report Filter along with report name. Once all above is associated with ReportDocument, I export ReportDocument to PDF file format and display the report. Here I dont' even bind ReportDocument with my ReportViewer. Moreover, as I mentioned previously this error is encountered randomly (with no reasonable explanation so far) on client PC (while browsing through application).
I hope below code give you good idea of the way I am implementing my reporting.
Looking forward to you solution. Please note that I am only passing the ReportFileName and Parameter and Filter Criteria to this form while dataTable by itself using the connection information.
<<<<<<<<<<<<<<<<<CODE BEHIND of REPORTVIEWER.ASPX>>>>>>>>>>>
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim strKeys() As String
Dim strReportFilter As String
Dim strReportName As String
Dim strError As structError
Try
ReDim strKeys(0)
If strReportName = "" Then
strReportName = Context.Session("ReportName").ToString()
If Not Session("ReportParameters") = Nothing Then
Dim char_Delimiter() As Char = ";".ToCharArray()
strKeys = Session("ReportParameters").ToString().Split(char_Delimiter)
End If
If Not Session("ReportFilter") = Nothing Then
strReportFilter = Session("ReportFilter").ToString()
End If
Else
Session("DataTable") = Nothing
End If
If Not ViewParameterReport(strReportName, strKeys, strReportFilter, strError) Then
ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
Exit Sub
End If
Catch ex As Exception
strError.strMsg = Err.Description
ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
Finally
End Try
End Sub
Private Function ViewParameterReport(ByVal str_ReportName As String, ByVal str_ReportParameters() As String, ByVal strReportFilter As String, ByRef strError As structError) As Boolean
Dim str_ReportPath As String = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
Dim crLogInfo As TableLogOnInfo
Dim crConnectionInfo As ConnectionInfo
Try
str_ReportPath = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
o_Rpt = New CrystalDecisions.CrystalReports.Engine.ReportDocument
o_Rpt.Load(str_ReportPath & "\rpts\" & str_ReportName)
If Context.Session("DataTable") = "" Then
crLogInfo = New TableLogOnInfo()
crConnectionInfo = New ConnectionInfo()
crLogInfo = o_Rpt.Database.Tables(0).LogOnInfo
crConnectionInfo = o_Rpt.Database.Tables(0).LogOnInfo.ConnectionInfo
clsDbCnn.SetDBProperties()
crConnectionInfo.ServerName = clsDbCnn.Server
crConnectionInfo.DatabaseName = clsDbCnn.Database
crConnectionInfo.UserID = clsDbCnn.UserID
crConnectionInfo.Password = clsDbCnn.Password
crLogInfo.ConnectionInfo = crConnectionInfo
o_Rpt.Database.Tables(0).ApplyLogOnInfo(crLogInfo)
Else
ds_MISReports = New DataSet()
ds_MISReports = CType(Session("DataTable"), DataSet)
o_Rpt.SetDataSource(ds_MISReports)
End If
If Not IsPostBack Then
Dim param_Fields As CrystalDecisions.Shared.ParameterFields = New ParameterFields()
Dim iCount As Integer
If str_ReportParameters.GetUpperBound(0) <> 0 Then
For iCount = 0 To str_ReportParameters.Length - 1 Step 2
o_Rpt.SetParameterValue(CStr(str_ReportParameters(iCount).ToString()), CStr(str_ReportParameters(iCount + 1).ToString()))
Next
o_Rpt.RecordSelectionFormula = strReportFilter
End If
End If
'crViewer.DisplayGroupTree = False
'crViewer.ReportSource = o_Rpt
SetDBLogonForReport(crConnectionInfo, o_Rpt)
Dim TargetFileName As String
Dim fs As System.IO.FileStream
Dim FileSize As Long
Dim GenDS As DataSet
'Dim oRD As New ReportDocument()
Dim crReportObject As CrystalDecisions.CrystalReports.Engine.ReportObject()
Dim oExO As ExportOptions
Dim oExDo As New DiskFileDestinationOptions()
'Build Target Filename
TargetFileName = str_ReportPath & "\Pdfs\" & Session.SessionID & ".pdf"
'Export to PDF
oExDo.DiskFileName = TargetFileName
oExO = o_Rpt.ExportOptions
oExO.ExportDestinationType = ExportDestinationType.DiskFile
oExO.ExportFormatType = ExportFormatType.PortableDocFormat
oExO.DestinationOptions = oExDo
o_Rpt.Export()
o_Rpt.Close()
'Send the file to the user that made the request
Response.Clear()
Response.Buffer = True
Response.AddHeader("Content-Type", "application/pdf")
Response.AddHeader("Content-Disposition", "attachment;filename=MyReport.pdf;")
fs = New System.IO.FileStream(TargetFileName, IO.FileMode.Open)
FileSize = fs.Length
Dim bBuffer(CInt(FileSize)) As Byte
fs.Read(bBuffer, 0, CInt(FileSize))
fs.Close()
Response.BinaryWrite(bBuffer)
Response.Flush()
Response.Close()
o_Rpt = Nothing
Return True
Catch ex As Exception
strError.strMsg = Err.Description
Return False
Finally
crConnectionInfo = Nothing
crLogInfo = Nothing
End Try
End Function
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, _
ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
Dim count As Integer
For count = 0 To myTables.Count - 1
Dim myTableLogonInfo As TableLogOnInfo = myTables(count).LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTables(count).ApplyLogOnInfo(myTableLogonInfo)
myTables(count).Location = myConnectionInfo.DatabaseName & ".dbo." & myTables(count).Location.Substring(myTables(count).Location.LastIndexOf(".") + 1)
myTables(count).LogOnInfo.ConnectionInfo.ServerName = myConnectionInfo.ServerName()
Next
End Sub -
How to get the reference of the View controller in from Custome controller
Hi friends,
From one of the Custome controllers in my Component,I am raising a popup based on conditions.
I want to subscribe to popup buttons.
Following is the code that I have written.
IF LT_RECEIPTS_T[] IS not INITIAL.
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
data lo_window type ref to if_wd_window.
*BREAK-POINT.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window = lo_window_manager->create_window(
window_name = 'W_PERSONALCARDPOPUP'
message_display_mode = if_wd_window=>co_msg_display_mode_selected
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none ).
lo_window->open( ).
DATA: view_controller TYPE REF TO if_wd_view_controller.
view_controller = wd_this->wd_get_api( ).
CALL METHOD lo_window->subscribe_to_button_event
EXPORTING
button = if_wd_window=>co_button_ok
action_name = 'OK'
action_view = view_controller.
as I am In Custome controller,wd_get_api is returing of type if_wd_controller,but the subscribe_to_button_event
requires action_view of data type if_wd_view_controller.
but,my problem is that I can keep the view only Custome controller.
when I pass the 'VIEW_CONTROLLER' variable to method subscribe_to_button_event,I am getting the error as type missmatch.
Please suggest how I can rectify this error.
Regards,
Xavier.PHi Xavier,
You try this
1. Define an attribute in your custom controller to hold your popup window reference for e.g lr_popup of type if_wd_window
2. Store the popup window reference in lr_popup when calling your popup
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
wd_this->lr_popup = lo_window_manager->create_window(
window_name = 'W_PERSONALCARDPOPUP'
message_display_mode = if_wd_window=>co_msg_display_mode_selected
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none ).
wd_this->lr_popup->open( ).
3. Define the custom controller usage in the properties of your popup view
4. In WDDOINIT of your popup view write the following
DATA lr_custom_controller TYPE REF TO ig_<Custom Controller>.
lr_custom_controller = wd_this->get_<Custom Controller>_ctr( );
lr_custom_controller->lr_popup->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
action_name = 'OK'
action_view = wd_this->wd_get_api( ) ).
5. Define the event handler for OK in your popup view
Best Regards,
Loveline -
Calling a method in the view controller from the component controller
Hi
Is there anyway to call a method in the view implementation from the component controller??
Thanks
jackThanks for all your replies. I want this kind of a functionality because Im trying to invove a DC (Child DC) from a Parent DC such that the Child DC's view is displayed onto the view container of the Parent DC. I have embedded using 'interface view of a component instance' in the Parent Window and am able to create the component and set usage though the onPlugDefault of the Child View.
But I observe that when i make a call from the parent, the flow is like this:
1. The wdDoInit of the Child Component Controller gets triggered first.
2. Then the wdDoInit of the Child's <b>VIEW</b> gets triggered
3. and <b>THEN</b> the onPlugDefault of the Child Component Interface View
What I had actually wanted was to Fire onPlugDefault where Im calling a method LoadData(), after which the Child DC's view must be triggered so it can display the fetched data.
What is actually happening is the view gets displayed, but no data is displayed in the view.
Right now I have just given a work around where Im triggering <b>LoadData()</b> of the <b>COmponent COntroller</b> from the <b>wdDoInit</b> of the <b>VIEW</b>.
Is there a better way to do this? I find it strange that I have to load the Data from the view.
Thanks
Jack -
Where does the View Controller reside ?
Hi Gurus,
Some basic doubts : I can't see the View and Window Controllers in SE80 . Where does it reside ? or it can only be reffered through code.
Thanks in advanceThe controllers can be accessed only by code, calling the wd_get_api on the wd_this, wd_comp_controller attributes.
Ofcourse, you can check the interface methods etc of if_wd_view_controller in se24.
Regards,
Nithya -
How to add a new element to a model node in the view controller?
View Context
myNode
attri1
attri2
myNode is a web service model node. How to add a new element to this node?
Regards,
Hui
Edited by: Hui Wang on Feb 15, 2008 12:05 PMSudhir Gorantla wrote:>
> Hi,
>
> myNode
> attri1
> attri2
>
> IMyNodeElement ele=wdContext.myNode().createMyNodeElement();
>
> ele.setAttri1("");
> ele.setAttri2("");
>
> wdContext.nodeMyNode().addElement(ele);
>
> Regards,
> Sudhir
Hi we need a model as an input parameter when creating a element for a model node. How to get the instance of the model?
Regards,
Hui -
Firing the Suspend Plug of Interface View Controller of1 DC from another DC
Hi Experts,
Can you please let me know if it is possible to fire a suspend plug from a Component Controller?
I've been tried it before from View controller on some event and was able to fire the plug successfully but when I am trying to fire the same from the init method of the Component Controller or init method of the view controller, it gives me the below error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Instance of interface view controller XXXXCompInterfaceView does not exist.
I believe that it is not possible to fire the suspend plug from the Init method of either Component Controller or View Controller.
So, is it possible to fire the suspend plug in one custom method of a component controller if the custom method is called from some another component?
Please let me know.
Thanks & Regards,
AnuragHi Prashant,
When I am trying to fire the Suspend plug from my view on click of a button, I am getting the following error:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot suspend embedded component via outbound plug <Plug Name> of view <Interface View Name>
at com.sap.tc.webdynpro.progmodel.view.ViewManager.fireSuspendPlug(ViewManager.java:209)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:533)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
Earlier, when I used to fire the plug from my DC; it used to work fine but now my DC is being used as a used DC in another component and since then I am facing this issue.
Currently, my DC is being used as used DC. I am not sure if I use any used DC, it would work or not.
Please respond if anybody has any suggestions.
Regards,
Anurag -
No method (within view controlle) to get reference to the window controller
Hello all,
I need to fire the exit plug of the window controller out of an embedded view.
All help I can find in the internet tell me to "easily" get a ref to the window controller and thus to fire its plug as follows:
data: L_REF_MAIN_WINDOW type ref to IG_MAIN_WINDOW .
L_REF_MAIN_WINDOW = WD_THIS->GET_MAIN_WINDOW_CTR( ).
L_REF_MAIN_WINDOW->FIRE_MY_EXIT_PLUG_PLG( ).
But my view-controller dos not implement a method like
GET_MAIN_WINDOW_CTR( )
How can I get this method generated? What am I doing wrong?
Thanks for your replies.
Edited by: iSD1977 on Aug 23, 2011 4:09 PMHello,
in the Properties tab of the View Controller, add Window Controller as Used Controller.
BR, Saravanan -
I dont need the image to swipe to follow the speed of the gesture, I just want the swipe to be slower as at the moment it comes on so fast it almost pops on.
Thanks!Thank you very much for your speedy answer.
I was hoping to get the effect of a push segue from the initial View Controller screen to a UIView on that same view controller. I seem to be able to add this option into my Swipe Gesture connections, (storyboard shows the segue arrow exiting the View controller and then pointing back into the same View Controller) This would be ideal, but I cant work out if its possible to link this segue to the new UIView I want. At the moment it just feeds back to the initial View Controller screen! Argggh!!! -
Hi
I have a view set in which there 3 views. 3 views are in three different View Areas.
I want them to one of them to visible at a time. The workflow in this case is on pressing button it goes to other view, and in second view the click of link opens table in third view.
I want after till i press enter button, the rest views shud be hidden, once i press enter button the first view becomes invisible and similarly for other views.
is there anything available like this?
Thanks in advance
SrikantHi,
Create a Value attribute of type visibility from Dictionary(com.sap.ide.webdynpro.uielementdefinitions.Visibility)by the name - Visibility and bind it to your View's Visible propery.
Now set the visibility of your view that you dont want to be displayed initially as WDVisibiliy.Blank,in this manner:
wdContext.currentContextElement().setVisibility(WDVisibility.BLANK)
//where Visibility is the context attribute here that u created.
and then on any action set it to WDvisibility.visible -when you want to show it, like this
wdContext.currentContextElement().setVisibility(WDVisibility.VISIBLE);
the same i posted in this link
Error "Instance of view controller does not exist"
have a look at it..but there is no difference.
All the best.
Regards,
Sirisha.R.S -
Rapidboot Error in Event Viewer
Folks - I am getting the following persistent error in Event Viewer on my brand new x220:
Faulting application name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Faulting module name: HyperW7Svc64.exe, version: 1.0.0.1, time stamp: 0x4cf5de0b
Exception code: 0xc0000005
Fault offset: 0x000000000000d248
Faulting process id: 0x35c
Faulting application start time: 0x01cc1678fdbedc11
Faulting application path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
Faulting module path: C:\Program Files\Lenovo\RapidBoot\HyperW7Svc64.exe
Report Id: 41b6ea8b-826c-11e0-af33-f0def15ccf15
Would appreciate any thoughts. Thanks.
Solved!
Go to Solution.I was able to resolve this issue and the PHCORE (Rapidboot driver) error no longer appears upon boot in Event Viewer.
I noticed that when Rapidboot's executable file (HYPERW764) BSOD'ed, both Superfetch and VSS became disabled in the Services - a big no-no. After re-enabling Superfetch and VSS, I was able to successfully uninstall and reinstall Rapidboot.
I believe the root cause may have been one of my antivirus programs (MSE or Malwarebytes), and since uninstalling them and installing ESET, I have had no issues with Rapidboot. -
How to work with the component controller.
I Created a Z component.
In that component controller i ceated a context node by using value node with BUT000 with the attribute NAME_ORG1.
I created a view in the same component.
In the view i created a Context Node BUT000 wiht NAME_ORG1.
I bind this view context node with compnent controller context node.
I want set the value from the view context node to component controller context node. How it is possible?
I created another Z component.
I created compoent controller like same context node above.
I created the view also.
I want display the first compoent controller data in the second component controller.
How it is possible.
For one component to another component we can pass the data based on component controller only?
Please give me how i can set/display the component controller context node with the data?
Thank You.
Regards,
B. Krishna.Hi Manish.
Thank you for reply Manish. I need some more information.
I created ZCOMP1 with view V1 and ZCOMP2 with view V2.
In both component controllers I created Context node by usng NAME_ORG1 of BUT000.
I provide the Navigation link from ZCOMP1 to ZCOMP2 as well as ZCOMP2 to ZCOMP1.
In Run Time Repository I provied two components as a INTERFACE VIEWS and
I provide ZCOMP2 as component Usage in ZCOMP1 as well as ZCOMP1 as a Component Usage in ZCOMP2.
Now, what ever data I entered in ZCOMP1 like NAME_ORG1 is "HELLO" then
This infomation I want display in ZCOMP2 - V2.
In ZCOMP2 method wd_usage_initialize
I write like this.
IF IV_USAGE->USAGE_NAME = 'CompUsage'.
iv_usage->bind_context_node( iv_controller_type = cl_bsp_wd_controller=>co_type_component
iv_target_node_name = 'BUT000'
iv_node_2_bind = 'BUT000' ).
ENDIF.
But it is displaying the Exception like this
Cannot display view ZCOMP2/MainWindow of UI Component ZCOMP2
An exception has occurred Exception Class CX_BSP_WD_INCORRECT_IMPLEMENT - The view controller or custom controller "" was implemented incorrectly
Method: CL_BSP_WD_COMPONENT_USAGE=>IF_BSP_WD_COMPONENT_USAGE~BIND_CONTEXT_NODE
Source Text Row: 24
Please tell me how to solve this Problem.
Regards,
B. Krishna. -
Data Controls Missing From View Controller Tab
Good Afternoon,
I have researched for hours over the internet and this forum but have not found an answer. My problem is this:
I am using JDeveloper Studio Edition Version 11.1.2.1.0. In my ViewController project no Data Controls are displayed in the Data Controls tab. No matter what I do they are not coming back. I have refreshed, closed, and re-deployed multiple times (As well as multiple other attempts!). I also checked the DataBindings.cpx file. I have been having this problem for DAYS.
When I try to run my page I get the following exception:
Error processing viewId: /home URI: /WEB-INF/pages/home.jspx actual-URI: /fragments/myTask/myTaskEdit.jsff.
oracle.jbo.NoObjException: JBO-25003: Object TaskAMDataControl of type DataControl is not found.
Does anyone know what to do to have the DataControls display in the Data Controls tab of the View Controller again?
Kind Regards
n0vicen0vice, is the model project holding the TaskAMDataControl part of the same workspace?
If yes, open the viewControllers project properties and select the 'dependencies' node. There you should see the model jpr file in the 'dependend projects or archives' section. If not click the pencil and add it.
Timo -
How to fire event in view controller from component controller.
I have a component usage that fires an event wich i have subscribed in the component controller.
iv_usage->subscribe_event( iv_event_name = 'TAKE_IT'
iv_handler = me ).
After the event the method IF_BSP_WD_EVENT_HANDLER~HANDLE_EVENT in the component controller is called.
method if_bsp_wd_event_handler~handle_event.
endmethod.
The usage component is opened as a popup window. After pressing a button, the data is transfered via context node binding to the calling component. But now i want to close the popup.
My intension is to fire a event for the view controller in the IF_BSP_WD_EVENT_HANDLER~HANDLE_EVENT method that closes the popup.
Is this possible?
Or let me explain it this way:
I want to close a popup after a button in the popup is pressed.
best regards
JürgenHello Juergen
I am assuming your target pop-up is of type ref to IF_BSP_WD_POPUP.
1.Make this a view controller class attribute.
2. After the code to create the pop-up, you can add the following block :
gv_target_popup->set_on_close_event( iv_view = me iv_event_name = 'CLOSEPOPUP').
3. Now define event handler EH_ONCLOSEPOPUP where you can write the logic for on_close.
You can access the same reference gv_target_popup at the event handler level as well.
Hope this helps.
Regards
Nisha
Maybe you are looking for
-
"Live Snippets" an idea sculpted out from a giant project.
Hi, all the enthusiastic members I intend to distribute an open source and free script collection, that lets the user to export a selected text to an Incopy file and observing and synchronising the relation between the exported file and its instances
-
INADEQUATE CONVERSION - PDF to WORD
Here is an example of a converted message from Pdf to Word: (it's useless ) bookt of the company within the term ot 6 days. Subsequent endorsements, which are not required to be registered,may be in. blank or following the first endorsement. Article
-
How to create high dynamic range image in Photoshop Elements 2.0?
I wonder if it is possible to Photoshop Elements 2.0. Any advice would be greatly appreciated.
-
Windows 8.1 evaluation install on XP PC
During the installation process of Windows 8.1 enterprise evaluation I format the disk drive so I think don't have XP anymore. And now the evaluation period expire. I need to know if I have to install a full version of Windows 8.1 or an upgrade for m
-
J2ME/Eclipse Pulsar/Polish UI - problem with Eclipse integration of JPolish
Hi guys, I have J2ME SDK 3.0 here with Eclipse Pulsar (with mobile tools for java) and I want to use the J2ME Polish libraries. I install J2ME Polish 2.1.2 and set the eclipse home directory and the "Integrate mepose with eclipse" tick or something l