Geforce 9400 vs. 9400M

My Mac Mini late 2009 should have the NVIDIA Geforce 9400M graphics card. Instead only the 9400 is shown in "about this Mac". I have reasons to assume that certain problems are connected to the 9400. Why do I not have the 9400M - or is it simply displayed incorrectly in the "About this Mac"?

Per this
Re: Is NVIDIA GeForce 9400 the same as GeForce 9400M?
They seem to be the same except in form factory. M is for mobile applications which is used on the Mini

Similar Messages

Is NVIDIA GeForce 9400 the same as GeForce 9400M?

Final Cut Pro X system requirements claim I need a GeForce 9400M to use the software but my Mac says I simply have a GeForce 9400. Are they essentially the same?

Hi,
Going to the Nvidia website, it is clear that they regard the 9400 and the 9400M as different. Is it only the form factor (M seems to be meant for laptops) or are there greater differences? I don't know. Mac users are usually saved from the Windows problems with driver updates, but that's another issue.
But my aging iMac does well enough with FCP X and seems to have the 9400 graphics card.
I agree, try the trial version and see what happens.

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

Does Sims 3 Pets work with Snow Leopard and NVIDIA GeForce 9400 graphics?

So I recently purchased Sims 3 Pets, because as I'm sure someone has heard, my computer met the tech specs published on the game box. But I have the problem in the game that whenever a horse appears, the game freezes. I've heard that updating Leopard (I have 10.5.8) to Snow Leopard fixes the problem. However, I've also heard that Sims 3 does not work with NVIDIA GeForce 9400 graphics. (But apparently Snow Leopard needs this graphic card to run?).
So my main question is does anyone know if Sims 3 Pets works with a NVIDIA GeForce 9400 card and Snow Leopard?

*** Just a Note: I've been playing the original Sims 3 game on my mac since it originally came out. I haven't had problems until this particular expansion pack.

K9VGM-V and KFA GeForce 9400 GT

Well I've had this PC awhile, got a K9VGM-V motherboard and now I'm trying to install a KFA GeForce 9400 GT so I can play some video games XD
Anyways I load up the comp and I hear some ticking and then it finally goes, then when I get in and try to install the drivers it tells me something like a compatible hardware couldn't be found. And when I go to hardware wizard it also doesn't find it. I've looked around and it seems like there's some conflict with VIA chipset an PCI-E 2.0 graphics cards or something, anyways that's the situation I'm in and wondering what I need to do to get this to work. Thanks,
-modchamp

MSI K9VGM-V Bios 1.0
AMD Athlon XP X2 4400+
2*1 GB Corsair DDR2 RAM
320 GB Western Digital Sata HDD
450W PSU
Windows XP Pro SP3
I think those are the specs offhand. If I unplug my monitor and plug it into the graphics card I get a black screen, but while unplugged I get a no signal message, so apparently I'm getting a signal from the graphics card it's just not sending anything. As I said before when I try and install drivers from the CD it tells me something like no compatible hardware found, and when I run the device wizard or check device manager there's no mention of this new graphics card. No I haven't disabled the onboard vga in bios or uninstalled the onboard vga drivers either. The drivers for the KFA GeForce 9400 GT that I've tried to install are: ForceWare 177.42 WinXP 32Bit, ForceWare 177.31 WinXP 32Bit, ForceWare 177.19 WinXP 32Bit Those are the drivers that come on the CD with the graphics card. Mostly I haven't disabled the onboard vga and uninstalled those drivers is because in the past I've always been able to install my graphics card and use display settings to switch graphics cards around and I'm a little afraid that if I uninstall and disable onboard graphics that I'll have trouble getting them back on if I can't get the graphics card working.

MCP7A Ultra Chipset (GeForce 9400) compatibility?

Hello all! I'm planning to purchase a new Core 2 Quad motherboard, for an Arch-based NAS server and secondary box. I was thinking of using one of the GeForce 9300/9400 integrated boards, so I would have the benefits of a video chipset without a separate card, but recently I read that this is not supported in Linux. Can anyone confirm that boards like http://www.gigabyte.com.tw/Products/Mot … uctID=2946 are viable? Even on the Nvidia site, they have the graphics drivers, but no chipset drivers for Linux.
Thanks.

Hmmm... on Nvidia's site it seems to insinuate that chipset drivers for Nforce boards (Including the GeForce 9400 ones) are included in the kernal - except for really old versions, which it seems you can download for Nforce1-4 based gear.
Any idea? I guess my key question at the moment is if I should purchase one of these boards, or a P45 based mATX.

21.5 iMac GeForce 9400 - Low Refresh Rate

Anyone have a 21.5" iMac with GeForce 9400 10.6.6? Playing the movie below, I only get about ~30 fps playback according to QuickTime Player 7's info window, and according to the frame meter in Quartz Debug. For you fellow coders, even CVDisplayLink callbacks only go at ~30 fps.
I've freshly restarted the machine, and there's nothing odd installed on the system at all. It really appears there's a hardware problem with not being able to get to 60 fps.
http://www.sethwillits.com/temp/60fpsMovie.mov

Could be a bad memory problem or an issue with Parallels. Try booting into Safe Mode and see if the panics cease.

NVIDIA GeForce 9400 iTunes video hiccups

On Mac OS, as soon as I start up iTunes, my video display seizes up (drops frames for a few hundred milliseconds) every 5 seconds or so, not just in iTunes playback, but across the entire display. This happens whether or not I am playing a video file. As soon as I quit iTunes, the freezes disappear. My computer is a Mac Mini with an NVIDIA GeForce 9400 video card, which I understand can be problematic with iTunes.
Here's the strange part: When I run iTunes on the Windows 7 partition of the same computer - iTunes plays files perfectly well with no freezes at all. Let me stress - the hardware is exactly the same: iTunes works for me under Windows 7, but not under Mac OS, which seems really weird!
Any advice gratefully accepted.
Eric

It doesn't use system memory, it can use if needs.
That's how Vista and W7 works:
New Video Memory Manager through new DX ==> "Graphics Memory Reporting through WDDM"
==> http://www.microsoft.com/whdc/device/display/graphicsmemory.mspx
==> http://download.microsoft.com/download/9/c/5/9c5b2167-8017-4bae-9fde-d599bac8184a/GraphicsMemory.doc
Quote
What can I do?
nothing

Where can I find a NVDIA GeForce 9400 driver upgrade?

imac9.1 is continually crashing. The problem report is indicating it is in "com.apple.GeForce(5.4.8)".
I assume what I need is to upgrade the NVIDIA GeForce 9400 driver, but I can't find it anywhere,
not even on the official NVIDIA site. Anybody know ehre I can find it?

Hi, we're stuck with what Apple gives us in the OS, before reinstalling 10.5, try reinstalling the big 10.5.8 combo.
Repair Permissions afterwords, reboot.
1058 Combo Update, 10.5.8...
http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Photoshop CS6 3D not supported by my NVIDIA GeForce 9400 256MB graphics card

Hey I am trying to use CS6 Photoshop 3D options and when I open Photoshop it says my graphics card is not supported for 3D, it say I need a graphics card that has 512 MB of vRAM. Can I update my MacBook Pro or am I SOL?

Welcome to the Apple Support Communities
The MacBook Pro has got a soldered graphic card, and in your case, you have an integrated card which doesn't work properly with these type of apps. Unfortunately, it's not possible to replace this card

NVIDIA GeForce 9400 graphic driver.

Installed Windows XP Service Pack 2 on my iMac - installed the drivers then was told to rebooted and end up with 4 bits and 800x600 resolution after rebooting. I went to Device Manager and disabled the driver then the resolution and bits goes back to normal.. Help please? Need a driver that is working perfectly fine!

Try Nividia site.
I wouldn't disable, I would uninstall the driver; uninstall the program; and take a look at Driver Sweeper from http://www.guru3d.com (and tips) to remove and delete graphics drivers (done in Safe Mode), then install the latest Nvidia.

Windows cannot recognize my GeForce 9400

Hi, this problem is driving me crazy, can you please help me?
I've got a MacBook and I needed Autodesk programs so I used bootcamp to install windows on my macbook. Everything's fine and all drivers are installed okay except for my video card. Windows doesn't recognize it. I tried Windows 7, Vista and XP SP2. None of them recognize it.
When I open my 3ds Max program this message shows up: "Unable to create a Direct3D device for your 3D hardware. Please make sure you have the latest version of DirectX installed and have the most recent version of your 3D hardware
driver installed."
I know it's not installed, but I used all drivers in the DVD that came with my macbook and even download some NVidia drivers but none of them worked. they show this error at the beginning of the installation that says "NVidia could not locate any drivers that are compatible with your current hardware"
Please! Any help would be greatly appreciated.

Hi jenramayan,
Welcome to the Apple Support Communities!
At this point I would suggest completely uninstalling iTunes and all of its components in the correct order and installing iTunes fresh again from the apple website. Please use the following article as reference.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
I hope this helps,
-Joe

MSI N 9400 GT 512MB stops windows 7 from booting

I purchased a MSI N94GT-MD512 GeForce 9400 GT 512MB 128-bit GDDR2 PCI Express x16 HDCP Ready Video Card from newegg (link: http://www.newegg.com/Product/Product.aspx?Item=N82E16814127412) When I got the thing I shut the computer off, installed the card, plugged in my monitor, booted and ran windows update for the driver. Everything worked perfect - great picture. I rebooted for some reason and the computer would get to "starting windows" and after that screen just reboot - endless cycle. I take the video card out and it boots no problem. If i uninstall the driver, shut off the computer, reinstall the card, and reboot it works - reinstall the driver, reboot, and endless boot cycle again. I can't figure this out. I'm running 32-bit fresh install of windows 7 ultimate. Any ideas?

>>Posting Guide<<

Xorg segfault [solved]

Some wine applications crash my xorg.. Here is the log:
[ 474.208]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 474.209] X Protocol Version 11, Revision 0
[ 474.209] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 474.209] Current Operating System: Linux pendulum 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64
[ 474.209] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91496126-part2 zfs=maindisk/root quiet ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 474.209] Build Date: 17 April 2013 02:37:06PM
[ 474.209]
[ 474.209] Current version of pixman: 0.30.0
[ 474.209] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 474.209] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 474.210] (==) Log file: "/var/log/Xorg.2.log", Time: Sun Jun 23 15:24:17 2013
[ 474.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 474.211] (==) No Layout section. Using the first Screen section.
[ 474.211] (==) No screen section available. Using defaults.
[ 474.211] (**) |-->Screen "Default Screen Section" (0)
[ 474.211] (**) | |-->Monitor "<default monitor>"
[ 474.211] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 474.211] (==) Automatically adding devices
[ 474.211] (==) Automatically enabling devices
[ 474.211] (==) Automatically adding GPU devices
[ 474.211] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 474.211] Entry deleted from font path.
[ 474.211] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 474.211] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 474.211] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 474.211] (II) Loader magic: 0x7fcc20
[ 474.211] (II) Module ABI versions:
[ 474.212] X.Org ANSI C Emulation: 0.4
[ 474.212] X.Org Video Driver: 14.1
[ 474.212] X.Org XInput driver : 19.1
[ 474.212] X.Org Server Extension : 7.0
[ 474.212] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 474.212] setversion 1.4 failed
[ 474.213] (--) PCI:*(0:1:0:0) 10de:0615:19da:7103 rev 162, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
[ 474.213] Initializing built-in extension Generic Event Extension
[ 474.214] Initializing built-in extension SHAPE
[ 474.214] Initializing built-in extension MIT-SHM
[ 474.214] Initializing built-in extension XInputExtension
[ 474.214] Initializing built-in extension XTEST
[ 474.214] Initializing built-in extension BIG-REQUESTS
[ 474.214] Initializing built-in extension SYNC
[ 474.214] Initializing built-in extension XKEYBOARD
[ 474.214] Initializing built-in extension XC-MISC
[ 474.214] Initializing built-in extension SECURITY
[ 474.214] Initializing built-in extension XINERAMA
[ 474.214] Initializing built-in extension XFIXES
[ 474.214] Initializing built-in extension RENDER
[ 474.214] Initializing built-in extension RANDR
[ 474.214] Initializing built-in extension COMPOSITE
[ 474.214] Initializing built-in extension DAMAGE
[ 474.214] Initializing built-in extension MIT-SCREEN-SAVER
[ 474.214] Initializing built-in extension DOUBLE-BUFFER
[ 474.215] Initializing built-in extension RECORD
[ 474.215] Initializing built-in extension DPMS
[ 474.215] Initializing built-in extension X-Resource
[ 474.215] Initializing built-in extension XVideo
[ 474.215] Initializing built-in extension XVideo-MotionCompensation
[ 474.215] Initializing built-in extension XFree86-VidModeExtension
[ 474.215] Initializing built-in extension XFree86-DGA
[ 474.215] Initializing built-in extension XFree86-DRI
[ 474.215] Initializing built-in extension DRI2
[ 474.215] (II) LoadModule: "glx"
[ 474.215] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 474.252] (II) Module glx: vendor="NVIDIA Corporation"
[ 474.252] compiled for 4.0.2, module version = 1.0.0
[ 474.252] Module class: X.Org Server Extension
[ 474.252] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
[ 474.252] Loading extension GLX
[ 474.252] (==) Matched nouveau as autoconfigured driver 0
[ 474.252] (==) Matched nvidia as autoconfigured driver 1
[ 474.253] (==) Matched nv as autoconfigured driver 2
[ 474.253] (==) Matched vesa as autoconfigured driver 3
[ 474.253] (==) Matched modesetting as autoconfigured driver 4
[ 474.253] (==) Matched fbdev as autoconfigured driver 5
[ 474.253] (==) Assigned the driver to the xf86ConfigLayout
[ 474.253] (II) LoadModule: "nouveau"
[ 474.254] (WW) Warning, couldn't open module nouveau
[ 474.254] (II) UnloadModule: "nouveau"
[ 474.254] (II) Unloading nouveau
[ 474.254] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 474.254] (II) LoadModule: "nvidia"
[ 474.254] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 474.255] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 474.255] compiled for 4.0.2, module version = 1.0.0
[ 474.255] Module class: X.Org Video Driver
[ 474.255] (II) LoadModule: "nv"
[ 474.255] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 474.255] (II) Module nv: vendor="X.Org Foundation"
[ 474.255] compiled for 1.14.0, module version = 2.1.20
[ 474.256] Module class: X.Org Video Driver
[ 474.256] ABI class: X.Org Video Driver, version 14.1
[ 474.256] (II) LoadModule: "vesa"
[ 474.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 474.256] (II) Module vesa: vendor="X.Org Foundation"
[ 474.256] compiled for 1.14.0, module version = 2.3.2
[ 474.256] Module class: X.Org Video Driver
[ 474.256] ABI class: X.Org Video Driver, version 14.1
[ 474.256] (II) LoadModule: "modesetting"
[ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 474.257] (II) Module modesetting: vendor="X.Org Foundation"
[ 474.257] compiled for 1.14.1, module version = 0.8.0
[ 474.257] Module class: X.Org Video Driver
[ 474.257] ABI class: X.Org Video Driver, version 14.1
[ 474.257] (II) LoadModule: "fbdev"
[ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 474.257] (II) Module fbdev: vendor="X.Org Foundation"
[ 474.258] compiled for 1.14.0, module version = 0.4.3
[ 474.258] Module class: X.Org Video Driver
[ 474.258] ABI class: X.Org Video Driver, version 14.1
[ 474.258] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
[ 474.258] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 474.258] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 474.299] (II) VESA: driver for VESA chipsets: vesa
[ 474.299] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 474.299] (II) FBDEV: driver for framebuffer: fbdev
[ 474.300] (--) using VT number 2
[ 474.747] (II) Loading sub module "fb"
[ 474.747] (II) LoadModule: "fb"
[ 474.747] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 474.747] (II) Module fb: vendor="X.Org Foundation"
[ 474.747] compiled for 1.14.1, module version = 1.0.0
[ 474.747] ABI class: X.Org ANSI C Emulation, version 0.4
[ 474.747] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 474.747] (II) Loading sub module "wfb"
[ 474.747] (II) LoadModule: "wfb"
[ 474.747] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 474.748] (II) Module wfb: vendor="X.Org Foundation"
[ 474.748] compiled for 1.14.1, module version = 1.0.0
[ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
[ 474.748] (II) Loading sub module "shadow"
[ 474.748] (II) LoadModule: "shadow"
[ 474.748] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 474.748] (II) Module shadow: vendor="X.Org Foundation"
[ 474.748] compiled for 1.14.1, module version = 1.1.0
[ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
[ 474.748] (II) Loading sub module "ramdac"
[ 474.748] (II) LoadModule: "ramdac"
[ 474.748] (II) Module "ramdac" already built-in
[ 474.749] (WW) Falling back to old probe method for vesa
[ 474.749] (WW) Falling back to old probe method for modesetting
[ 474.749] (WW) Falling back to old probe method for fbdev
[ 474.749] (II) Loading sub module "fbdevhw"
[ 474.749] (II) LoadModule: "fbdevhw"
[ 474.749] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 474.749] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 474.749] compiled for 1.14.1, module version = 0.0.2
[ 474.749] ABI class: X.Org Video Driver, version 14.1
[ 474.749] (EE) open /dev/fb0: No such file or directory
[ 474.749] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 474.749] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 474.749] (==) NVIDIA(0): RGB weight 888
[ 474.749] (==) NVIDIA(0): Default visual is TrueColor
[ 474.749] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 474.750] (**) NVIDIA(0): Enabling 2D acceleration
[ 474.948] (II) NVIDIA(GPU-0): Display (Acer S240HL (DFP-0)) does not support NVIDIA 3D
[ 474.948] (II) NVIDIA(GPU-0): Vision stereo.
[ 474.949] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 474.949] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 474.949] (--) NVIDIA(0): VideoBIOS: 62.92.7e.00.00
[ 474.949] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 474.955] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 474.955] (--) NVIDIA(0): CRT-0
[ 474.955] (--) NVIDIA(0): CRT-1
[ 474.955] (--) NVIDIA(0): TV-0
[ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0) (boot, connected)
[ 474.955] (--) NVIDIA(0): DFP-1
[ 474.955] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): 330.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): Internal Dual Link TMDS
[ 474.955] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[ 474.955] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 474.955] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 474.955] (**) NVIDIA(0): device Acer S240HL (DFP-0) (Using EDID frequencies has
[ 474.955] (**) NVIDIA(0): been enabled on all display devices.)
[ 474.957] (==) NVIDIA(0):
[ 474.957] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 474.957] (==) NVIDIA(0): will be used as the requested mode.
[ 474.957] (==) NVIDIA(0):
[ 474.957] (II) NVIDIA(0): Validated MetaModes:
[ 474.957] (II) NVIDIA(0): "DFP-0:nvidia-auto-select{}"
[ 474.957] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 474.987] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[ 474.987] (--) NVIDIA(0): option
[ 474.987] (II) UnloadModule: "nv"
[ 474.988] (II) Unloading nv
[ 474.988] (II) UnloadModule: "vesa"
[ 474.988] (II) Unloading vesa
[ 474.988] (II) UnloadModule: "modesetting"
[ 474.988] (II) Unloading modesetting
[ 474.988] (II) UnloadModule: "fbdev"
[ 474.988] (II) Unloading fbdev
[ 474.988] (II) UnloadSubModule: "fbdevhw"
[ 474.988] (II) Unloading fbdevhw
[ 474.988] (--) Depth 24 pixmap format is 32 bpp
[ 474.988] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 474.991] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 474.991] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 474.991] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 474.991] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 474.991] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 474.991] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 474.991] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 474.991] (II) NVIDIA(0): Config Options in the README.
[ 474.996] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
[ 475.029] Loading extension NV-GLX
[ 475.039] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 475.041] (==) NVIDIA(0): Backing store disabled
[ 475.041] (==) NVIDIA(0): Silken mouse enabled
[ 475.042] (==) NVIDIA(0): DPMS enabled
[ 475.042] Loading extension NV-CONTROL
[ 475.042] Loading extension XINERAMA
[ 475.042] (II) Loading sub module "dri2"
[ 475.042] (II) LoadModule: "dri2"
[ 475.042] (II) Module "dri2" already built-in
[ 475.042] (II) NVIDIA(0): [DRI2] Setup complete
[ 475.042] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 475.042] (--) RandR disabled
[ 475.046] (II) Initializing extension GLX
[ 475.195] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 475.195] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 475.195] (II) LoadModule: "evdev"
[ 475.196] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 475.196] (II) Module evdev: vendor="X.Org Foundation"
[ 475.196] compiled for 1.14.0, module version = 2.8.0
[ 475.196] Module class: X.Org XInput Driver
[ 475.196] ABI class: X.Org XInput driver, version 19.1
[ 475.196] (II) Using input driver 'evdev' for 'Power Button'
[ 475.196] (**) Power Button: always reports core events
[ 475.196] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 475.196] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 475.196] (--) evdev: Power Button: Found keys
[ 475.196] (II) evdev: Power Button: Configuring as keyboard
[ 475.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 475.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 475.196] (**) Option "xkb_rules" "evdev"
[ 475.196] (**) Option "xkb_model" "evdev"
[ 475.196] (**) Option "xkb_layout" "us"
[ 475.217] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 475.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 475.217] (II) Using input driver 'evdev' for 'Power Button'
[ 475.217] (**) Power Button: always reports core events
[ 475.217] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 475.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 475.217] (--) evdev: Power Button: Found keys
[ 475.218] (II) evdev: Power Button: Configuring as keyboard
[ 475.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 475.218] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 475.218] (**) Option "xkb_rules" "evdev"
[ 475.218] (**) Option "xkb_model" "evdev"
[ 475.218] (**) Option "xkb_layout" "us"
[ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 475.218] setversion 1.4 failed
[ 475.218] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
[ 475.219] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[ 475.219] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 475.219] (**) A4TECH USB Device: always reports core events
[ 475.219] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
[ 475.219] (II) evdev: A4TECH USB Device: Using mtdev for this device
[ 475.219] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[ 475.219] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[ 475.219] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 475.219] (--) evdev: A4TECH USB Device: Found relative axes
[ 475.219] (--) evdev: A4TECH USB Device: Found absolute axes
[ 475.219] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[ 475.219] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[ 475.219] (--) evdev: A4TECH USB Device: Found keys
[ 475.219] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[ 475.219] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 475.219] (II) evdev: A4TECH USB Device: Configuring as keyboard
[ 475.219] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 475.219] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 475.219] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 475.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input1/event1"
[ 475.219] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 8)
[ 475.219] (**) Option "xkb_rules" "evdev"
[ 475.219] (**) Option "xkb_model" "evdev"
[ 475.220] (**) Option "xkb_layout" "us"
[ 475.220] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 475.220] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[ 475.220] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[ 475.220] (**) A4TECH USB Device: (accel) acceleration profile 0
[ 475.220] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 475.220] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 475.220] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[ 475.220] (II) No input driver specified, ignoring this device.
[ 475.230] (II) This device may have been added with another device file.
[ 475.230] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
[ 475.230] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[ 475.230] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 475.230] (**) A4TECH USB Device: always reports core events
[ 475.230] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
[ 475.230] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[ 475.231] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[ 475.231] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 475.231] (--) evdev: A4TECH USB Device: Found relative axes
[ 475.231] (--) evdev: A4TECH USB Device: Found x and y relative axes
[ 475.231] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 475.231] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 475.231] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 475.231] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 475.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input2/event2"
[ 475.231] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
[ 475.231] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 475.231] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[ 475.231] (**) A4TECH USB Device: (accel) acceleration profile 0
[ 475.231] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 475.231] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 475.231] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[ 475.231] (II) No input driver specified, ignoring this device.
[ 475.231] (II) This device may have been added with another device file.
[ 475.232] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 475.232] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 475.232] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 475.232] (**) AT Translated Set 2 keyboard: always reports core events
[ 475.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 475.232] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 475.232] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 475.232] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 475.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 475.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 475.232] (**) Option "xkb_rules" "evdev"
[ 475.232] (**) Option "xkb_model" "evdev"
[ 475.232] (**) Option "xkb_layout" "us"
[ 480.188] (EE)
[ 480.189] (EE) Backtrace:
[ 480.189] (EE) 0: X (xorg_backtrace+0x3d) [0x57f48d]
[ 480.189] (EE) 1: X (0x400000+0x1831e9) [0x5831e9]
[ 480.189] (EE) 2: /usr/lib/libpthread.so.0 (0x7f10e9de6000+0xf0e0) [0x7f10e9df50e0]
[ 480.189] (EE) 3: ?? [0x4106cb15]
[ 480.189] (EE)
[ 480.189] (EE) Segmentation fault at address 0x0
[ 480.189]
Fatal server error:
[ 480.189] Caught signal 11 (Segmentation fault). Server aborting
[ 480.189]
[ 480.189] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 480.189] (EE) Please also check the log file at "/var/log/Xorg.2.log" for additional information.
[ 480.189] (EE)
[ 480.526] Server terminated with error (1). Closing log file.
My system is fully updated and apparently video is fine:
$ sudo pacman -Syyuw
:: Synchronizing package databases...
:: Starting full system upgrade...
there is nothing to do
$ glxinfo |grep '^Open\|^dir'
direct rendering: Yes
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 250/PCIe/SSE2
OpenGL core profile version string: 3.3.0 NVIDIA 319.23
OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.3.0 NVIDIA 319.23
OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:
$
I have no idea of what to try... any insight?
Solved, it was really stupid. For some reason my Multilib repo got disable in the pacman config. So the 32bit nvidia drivers were old...
Last edited by ezzetabi (2013-06-23 14:10:36)

Yeah, sorry I didn't notice this post sooner, or I could have saved you some trouble shooting.
After testing and discussion on NVIDIA forums with someone else having the same problem, we realized that it is apparently a problem with any Xorg 1.7 release using Xinerama with a monitor positioned Left of another display.
The person I was talking to said he bugged it, and rearranged his monitors right of. I downgraded to xorg 1.6 and haven't given it too much though since. I should probably follow up on that and submit a bug to xorg or something... or you are welcome to!
Works great with Xinerama turned off, which is actually a fine option for me since I don't tend to move windows between displays, except I am using Xinerama to work around an xmonad bug in handling multiple non-Xinerama displays. I would have never caught it if I hadn't tried turning Xin on to fix the xmonad issue right before the 1.7 upgrade and gotten curious why my setup started going crazy (since I have a monitor with two monitors to the left of it)..
One thing that also works is making your left most monitor screen 0 and setting the other two monitors to be RightOf it, or at least that worked for me. Unfortunately, my left most monitor is a 46 inch tv that is often turned off or on a different input, so I can't really have it being screen 0.

Looking for a better graphic card. Need feedback and suggestion

I'm looking to get a different graphic card but I'm not sure really what to buy,
These are my computer specs
Computer: Gateway Gt5228 Media center edition
OS: Windows Xp
Current graphic card: NVIDIA GeForce 6100 PCI Express Slot avaliable
I was wondering what would be a good graphic card that is a good significant upgrade. I'm looking for one that has a significant increase over what I have right now, it doesn't necessarily have to be the best out there.
I want to be able to play a game call Diablo 3
These are the High and low Performance, that the game will run with.
Supported - High PerformanceNVIDIA AMD/ATI INTEL
GeForce GTX 590
Radeon HD 6990
N/A
GeForce GTX 580
Radeon HD 6970
GeForce GTX 570
Radeon HD 6950
GeForce GTX 560 ti
Radeon HD 6870
GeForce GTX 550 ti
Radeon HD 6850
GeForce GTX 480
Radeon HD 6790
GeForce GTX 470
Radeon HD 6770
GeForce GTX 465
Radeon HD 6750
GeForce GTX 460
Radeon HD 5970
GeForce GTS 360M
Radeon HD 5870
GeForce GTX 295
Radeon HD 5850
GeForce GTX 285
Radeon HD 5830
Geforce GTX 280
Radeon HD 5770
Geforce GTX 280M
Radeon HD 5750
GeForce GTX 275
Radeon HD 4870
GeForce GTX 260
Radeon HD 4870
Quadro FX 5800
Radeon HD 4850
Radeon HD 4800
FirePro 3D V8750
FirePro 3D V8700
FireStream 9370
Firestream 9350
FireStream 9270
FireStream 9250
Supported - Low PerformanceNVIDIA AMD/ATI INTEL
GeForce 9500 GT
Radeon HD 3650 AGP
HD Graphics 4000
GeForce 9400 GT
Radeon HD 3650
HD Graphics 3000
GeForce 9300 GS
Radeon HD 3600
HD Graphics 2000/1000
GeForce 8800 GS
Radeon HD 3470
GeForce 8600 GT
Radeon HD 3450
GeForce 8600 GTS
Radeon HD 3430
GeForce 8500 GT
Radeon HD 3200
GeForce 8400 GS
Radeon HD 3100
GeForce 8400
Radeon HD 2600 XT AGP
GeForce 8300 GS
Radeon HD 2600 XT
GeForce 8300
Radeon HD 2400 Series
GeForce 8200
Radeon HD 2350
GeForce 8100
Radeon HD 2100
GeForce 7950
Mobility Radeon HD 4530
GeForce 7900
Mobility Radeon HD 4330
GeForce 7900 GS
Mobility Radeon HD 2600 XT
GeForce 9500M GS
Mobility Radeon HD 2600
GeForce 9500M G
Mobility Radeon HD 2600
GeForce 9400M
Mobility Radeon HD 2400 XT
GeForce 8600M GT
Mobility Radeon HD 2400
GeForce Go 7900
Mobility Radeon HD 2300
GeForce Go 7800
Mobility Radeon X2300
Quadro FX 5500
Radeon X1950 Series
Quadro FX 4500
Radeon E2400
Quadro FX 4000
FirePro 3D V7750
Quadro FX 3500
FirePro 3D V5700
Quadro FX 3450
Any help would be greatly appreciated
Which ones can i use with my computer but without the need to buy nothing else.
thank you
-Geo

Honestly I wouldn't spend too much trying to upgrade your computer. It has an aging dual core Athlon processor, and only 2GB of RAM. Even with the highest top of the line card, with that CPU/RAM setup, your computer is probably going to struggle to run it.
Hate to be the bearer of bad news.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Geforce 9400 vs. 9400M

Similar Messages

Maybe you are looking for