General knowledge/Guidelines on UWL behaviour - configured from XML files

Hi,
Like a lot of other people working with SAP UWL, we also have the needs for configuring the UWL behaviour from the XML files.
Until now, we have managed (not many cases/issues - but, a lot of time) to handle the needs.
But, my aim is to get a more stuctural knowledge of the uwl.standard, uwl.webflow etc. and the relationsships between the elements between them. When we have an issue to solve now, we almost start from scratch as we do not have an structural overview of the files and their contents - and their elements interrelationships.
I have searched to find it, but, unfortunately I have not succeeded.
Do some of you guys know where to obtain some structural knowledge of the XML files featured?

Hi Lars,
Check out the following documentation (the last link is the most interesting for you):
http://help.sap.com/saphelp_nw70/helpdata/en/43/f935e788be10b3e10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
Cheers,
Noë

Similar Messages

Load Sales Order from Xml file

Hi,
I want to load a sales order from xml file. How can I do so? Where I'll get the xml schema for Sales Order or other documents (delivery,invoice etc)?
Plz reply with code and xml file.

When I'm going to load SO from xml file, it's showing an error:
"The connected value 0 was not found in table Uasge of Nota Fiscal".
What is this table for? Which attribute is related with this table?
How can I find out that?

I want to load a sales order from xml file. How can I do.

Hi,
I want to load a sales order from XML file. How can I do ? how can i create the sales order?
what are the necessary setting for create the sales orders.
with Regards,
Prakesh.

Three options come to my mind.
Option 1: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (BAPI) and Program (CREATEFROMDAT2).
Option 2: Use SAP transaction SXDA_TOOLS (Object Type BUS2032), Program Type (DINP) and Program (RVINVB10).
Option 3: Translate the xml to IDoc so that ORDER04 / ORDER05 Idoc can be used to create Sales order (WEDI transaction).

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
Priya

Hi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon

How to retrieve image from XML file

Hi All,
I am new to XML. So any best guidance is appreciated.
The application requirement is to display image retrived from uploaded xml file in file upload section of our application. And store that image in database.
In my XML file , images & strings & numbers & booleans are there . I am able to save everything in database except images .
I am using JSF, Seam & Hibernate combination. In my Hibernate entity class i took BLOB datatype for image.
I am using following tags in my Xhtml file to display image
<s:graphicImage value="#{hibernateentitybean.picBlobtype}" height="200" width="200">
<s:transformImageSize width="200" height="200" />
<s:transformImageType contentType="image/jpeg"/>
But image is not displayed in Xhtml file
I am using org.w3c.dom.Document for retrieving node name & corresponding value in that node in XML file.
I am getting code like below for Image when i am logging all values from XML files in my bean class .
x0lGQRQAAAABAAAAAAAAAFJHAQARAAAAVwBhAHQAZQByACAAbABpAGwAaQBlAHMALgBqAHAAZwAAAP/Y/+AAEEpGSUYAAQIBAGAAYAAA/+0YLl
I want to convert this value to image. So i can convert image to bytes and store in BLOB.
Can anyone guide me ? or any other approach .
Thanks in advance for any reply.
Regards,
Naresh

Dan_Koldyr wrote:
agree, it's really odd. Just reread OP and it says:
NareshDharmiVatsal wrote:
want to convert this value to image. In any case it doesn't get worth then another single code line:
final String cdata = "x0lGQRQAAAABAAAAAAAAAFJHAQARAAAAVwBhAHQAZQByACAAbABpAGwAaQBlAHMALgBqAHAAZwAAAP/Y/+AAEEpGSUYAAQIBAGAAYAAA/+0YLl";
final sun.misc.BASE64Decoder decoder = new sun.misc.BASE64Decoder();
final byte[] data = decoder.decodeBuffer(cdata);
Blob blob = new SerialBlob(data);//or what ever other DB-specific blob implementaiton Did i answered original question? Any more comments to my first replay?I can comment on this latest code. The package sun.misc is private to Sun (Oracle now of course). It is undocumented and may change or be removed altogether in a future release. There is a good free open source Base64 decoder in the Jakarta Commons Codec library.

How to retrieve value from xml file

hi all,
can somebody pls tell me how to retrieve value from xml file using SAXParser.
I want to retrieve value of only one tag and have to perform some validation with that value.
it's urgent .
pls help me out
thnx in adv.
ritu

hi shanu,
the pbm is solved, now i m able to access XXX no. in action class & i m able to validate it. The only thing which i want to know is it ok to declare static ArrayList as i have done in this code. i mean will it affect the performance or functionality of the system.
pls have a look at the following code snippet.
public class XMLValidator {
static ArrayList strXXX = new ArrayList();
public void validate(){
factory.setValidating(true);
parser = factory.newSAXParser();
//all factory code is here only
parser.parse(xmlURI, new XMLErrorHandler());
public void setXXX(String pstrXXX){
strUpn.add(pstrXXX);
public ArrayList getXXX(){
return strXXX;
class XMLErrorHandler extends DefaultHandler {
String tagName = "";
String tagValue = "";
String applicationRefNo = "";
String XXXValue ="";
String XXXNo = "";
XMLValidator objXmlValidator = new XMLValidator();
public void startElement(String uri, String name, String qName, Attributes atts) {
tagName = qName;
public void characters(char ch[], int start, int length) {
if ("Reference".equals(tagName)) {
tagValue = new String(ch, start, length).trim();
if (tagValue.length() > 0) {
RefNo = new String(ch, start, length);
if ("XXX".equals(tagName)) {
XXXValue = new String(ch, start, length).trim();
if (XXXValue.length() > 0) {
XXXNo = new String(ch, start, length);
public void endElement(String uri, String localName, String qName) throws SAXException {
if(qName.equalsIgnoreCase("XXX")) {
objXmlValidator.setXXX(XXXNo);
thnx & Regards,
ritu

Question about insert date value from xml file

I want insert value into table from xml file. Every time I inserted value of date type into the table, I got the unpasable error message as following:
oracle.xml.sql.OracleXMLSQLException: Exception 'java.text.ParseException:Unpars
eable date: "2000-04-19 00:00:00.0"' encountered during processing ROW element
Thanks for anyone that can fix my problem or give me any suggestion.
email: [email protected]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by matmnwx:
I want insert value into table from xml file. Every time I inserted value of date type into the table, I got the unpasable error message as following:
oracle.xml.sql.OracleXMLSQLException: Exception 'java.text.ParseException:Unpars
eable date: "2000-04-19 00:00:00.0"' encountered during processing ROW element
Thanks for anyone that can fix my problem or give me any suggestion.
email: [email protected]<HR></BLOCKQUOTE>
Use:
OracleXMLSave sav = new OracleXMLSave(conn,tabName);
sav.setDateFormat(<hier the date format in the XML-File>);

How to delete a perticular node from xml file using java code

Hii All,
Now i am trying to delete a perticular node from xml file.Like...
XML file:
<Licence>
<SERVER>
<was id="1">1</was>
<was id="2">2</was>
</SERVER>
</LICENCE>
I am working in messaging service using JABBER framework with whiteboard facility.
Here Some commands i have created to add,modify,delete nodes from xml file.They Are
1.If u want to add a new node then.
create Licence.SERVER <ss id="3">ddd</ss> lic.xml
(here u want to add a new node called "ss" under Licence.SERVER.
And lic.xml is tyhe xml file name where it was saved.
2.If u want to delete a node(Suppose <was id="1">),then the command should be
delete Licence.SERVER.was:id='"1" lic.xml
A problem arises that here it find two was attributes.And it delete the last was attribute,not the requested node.
PLEASE HELP ME IN SOLVING THIS CODE..
------------------------------------

Looks like you clicked on "Post" before you pasted in the code you were talking about.

Data Load from XML file to Oracle Table

Hi,
I am trying to load data from XML file to Oracle table using DBMS_XMLStore utility.I have performed the prerequisites like creating the directory from APPS user, grant read/write to directory, placing the data file on folder on apps tier, created a procedure ‘insertXML’ to load the data based on metalink note (Note ID: 396573.1 How to Insert XML by passing a file Instead of using Embedded XML). I am running the procedure thru below anonymous block to insert the data in the table.
Anonymous block
declare
begin
insertXML('XMLDIR', 'results.xml', 'employee_results');
end;
I am getting below error after running the anonymous block.
Error :     ORA-22288: file or LOB operation FILEOPEN failed”
Cause :   The operation attempted on the file or LOB failed.
Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
I searched this error on metalink and found DOC ID 1556652.1 . I Ran the script provided in the document. PFA the script.
Also, attaching a document that list down the steps that I have followed.
Please check and let me know if I am missing something in the process. Please help to get this resolve.
Regards,
Sankalp

Thanks Bashar for your prompt response.
I ran the insert statement but encountered error,below are the error details. statement.
Error report -
SQL Error: ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 1
22288. 00000 - "file or LOB operation %s failed\n%s"
*Cause:    The operation attempted on the file or LOB failed.
*Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
INSERT statement I ran
INSERT INTO employee_results (USERNAME,FIRSTNAME,LASTNAME,STATUS)
    SELECT *
    FROM XMLTABLE('/Results/Users/User'
           PASSING XMLTYPE(BFILENAME('XMLDIR', 'results.xml'),
           NLS_CHARSET_ID('CHAR_CS'))
           COLUMNS USERNAME NUMBER(4)    PATH 'USERNAME',
                   FIRSTNAME VARCHAR2(10) PATH 'FIRSTNAME',
                   LASTNAME    NUMBER(7,2) PATH 'LASTNAME',
                   STATUS VARCHAR2(14) PATH 'STATUS'
Regards,
Sankalp

Dynamically create Value Objects from XML file

Hi
I want to create a value object from Xml file dynamically,like in the xml file i have the name of the variable and the datatype of the variable.is it possible do that,if so how.

Read about apache's Digester tool. This is part of the Jakartha project. This tool helps in creating java objects from the XML files. I am not sure, if that is what u r looking for.

Reading data From XML file and setting into ViewObject to Pouplate ADF UI

Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
Thanks

Read chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo

How to remove Unicode from XML file

I get following error when unmarshal xml:
[java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
Thanks

These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

How to parse contents from XML file in Java

Hi All,
I have a scenario like this . I have one xml file with key value pairs of ( name , URL ) . I have retrieved contents from XML file , now I want to parse these contents and store in a bean object.
How to parse Contents of XML file??
Thanks in advance,
Rajendra.

Hi All,
I have a scenario like this . I have one xml file with key value pairs of ( name , URL ) . I have retrieved contents from XML file , now I want to parse these contents and store in a bean object.
How to parse Contents of XML file??
Thanks in advance,
Rajendra.

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

1.6 Dynamic Photo Gallery - alt and title attributes from xml file?

Hi!
I would like to attach information to my gallery images from
the XML-file used by the gallery.
Especially the alt and title attributes for the "img
id="mainImage"-tag would add a bit more user friendliness.
I found
this
example about adding caption to images very help full and
everything worked just fine, thanks to clear information!
(http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadi d=1306782&enterthread=y)
Could someone come up with an example of adding title/alt
attributes values from XML file?
I'm sure there are quite a few out ther who would like to see
a solution to this ;)

You need to add your info to the XML.
So something like:
<photo
path = "travel_01.jpg"
width = "263"
height = "350"
title="my title"
alt_text="Alt Text"
thumbpath = "travel_01.jpg"
thumbwidth = "56"
thumbheight = "75">
</photo>
Then in your detailregion:
<img src="{dsData::large/@base}{@path}" alt="{@alt_text}
title="{@title}" />
I am using
http://www.adobe.com/devnet/dreamweaver/articles/spry_photo_album.html
as the source of my samples...
So, just add the data to the XML and then you will have these
attributes available as data references.
Hope this helps.
Don

General knowledge/Guidelines on UWL behaviour - configured from XML files

Similar Messages

Maybe you are looking for