General Ledger extraction Entry date wise (FBL3N & FBL1N)

Hi All,
How can we extract the GL entry date wise. We are trying through FBL3N & FAGLL03 but entry date option is not showing in dynamic selection. Please advice.
Thanks & Regards.
Pankaj

Hello,
Run report FBL3N.
From the main menu - go to Settings - Special Fields and add BKPF-CPUDT (Entry date) in the special fields.
After you have added the entry date in special fields you will be able to see the Entry date in the change layout screen in both FBL3N report.
Similarly you can add special fileds for FAGLL03 report.
Once you do the above you will get the entry date in both the reports.
Regards,
Prasad

Similar Messages

  • Entry Date in FBL3N / FAGLL03 report

    Dear Friends,
    How can i see Entry Date in the above reports or evenFBL5N or FBL1N?
    Thanks
    Sanjay

    Hi...As per your issue
    Go to FBL5N or FBL1N..Double click respective document number and click header data at header level (with cap symbol) there see the Entry date
    Other wise Go to BKPF table go to settings and click on format list and select chose field and select your respective fields (Like entry date)
    And  enter Company code ,Document number and fiscal year   ...there you can see...
    otherwise your ABAPER to create Z report Entry date field name is : CPUDT
    I hope it will helps you....
    Regards
    vamsi

  • General Ledger GL Account Text in FBL3N

    Dear Friends,
                       Is it possible to get the General Ledger Account Text in FBL3N. If yes, please suggest the noters,if any or the customization steps.
    Thanks in Advance,
    Prathamesh.

    Hi
    this is Chandu,
    U can chose the fields by opening change layout (ctrl f8) button after opening the into fbl3n.from there which fields u want to display on screen,u can set those fields.And if u want to have that layout futher u can save(ctrl f12) that layout and later on u can chose(ctrl f9) that. I think this is ur doubt
    Thank u

  • GL Account Balance in New General Ledger (ECC6.0) FAGLB03 / FAGLL03 / FBL3N

    Hi - Have an issue when executing TCode FAGLB03 for a single G/L Account. When drilling down into the Cumulative Balance column, the Line Item Display balance becomes different/larger??
    This is also the case when executing FAGLL03 for the G/L Account u2013 the balance displayed in Entry View is Zero, however the same G/L Accounts balance is 11k when using G/L view.
    Any ideasu2026..???
    Thanks in advance.

    You may have the same issue my company is having and which I am currently working with SAP to fix. For several GL accounts, using FABLB03 as the starting point, the account will have a specific balance. However, when I drill-down (which calls FAGLL03 line item) the total of the line item report does not equal to the total of the FAGLB03 transaction. In this case, certain line items of documents will have the Posting Key "flipped". Meaning in FAGLB03, the balance is a debit (PK 40), but when you drill down, the PK becomes a 50.  The total shown in FAGLB03 is correct. If you run other FI GL reports (any of the S_ALR-*) the total will equal FAGLB03.
    There are a number fo OSS notes concerning this topic, but start with the following: 1223997, 992566 and 1155429. You will have to open a note with SAP as they must run the reports listed in note 1155429. If you are using document splitting or not will determine which report SAP will run. You cannot execute these reports youself. Only SAP is allowed. My company does not use document splitting, so we implemented the report Z_ANALYZE_PK_DC_NEWGL. Again, do not run this yourself.
    Just FYI.. SAP will need access to your system to view the issue, etc. I have been working with SAP for overa month now to get this fixed, so don't expect it to be fixed in a day or two.

  • Workflow issue with interco transactions & general ledger entries in F-02

    Hello Experts,
    We are encountering a workflow issue when we are entering intercompany transactions with general ledger entries in F-02. Our workflow is set up with two release levels and the details are as follows:
    Amount below $2500 - single release level
    Amount above $2500 - two release levels
    The document type that we are using is SU and it is configured with intercompany postings and trading partner enabled in the control data.
    After parking a GL document that has interco amount entries below $2500 and general ledger amount entries above $2500 in F-02, the document is supposed to go to the two release levels in the workflow because the total amount is above $2500 (interco amount + general ledger amount > $2500). However, in the workflow, the document went to the single release level instead of the two release levels.
    Any idea why the subledger amount takes precedent over the general ledger amounts in determining the workflow release level?
    We would appreciate your help in solving this issue.

    You cannot change the design of the system.
    SAP may consider the change of design if all the users across the industries are reported. If a single user has a special requirement, it cannot be changed.
    You need to ask, whether this is a critical requirement for your business. Otherwise, please follow the standard way.

  • Entry date is not showing in fbl3n

    hello,
    my client wants to see the entry date in fbl3n screen. so I have done the little configuration in spro "define special fields for line item display" where i select table-bkpf and field-cpudt.
    But I am able to see the entry date only in fagll03 not in fbl3n.
    please suggest me where i am wrong and what to do next to solve it.
    thanks and regards
    konishko

    Hi
    It is really surprising that CPUDT is still not appearing.  May be that the place you have updated your customizing is relating to newGL customizing.
    Can you please check whether the entry you have added in available in T.code O7R3 and OBVU.
    If it still does not work, then delete the entry and add it again and execute FBL3N again.
    Regards

  • ACCOUNTING ENTRY를 GENERAL LEDGER로 TRANSFER 할수 없는 경우

    제품 : FIN_AP
    작성날짜 : 2003-05-15
    ACCOUNTING ENTRY를 GENERAL LEDGER로 TRANSFER 할수 없는 경우
    ===================================================
    PURPOSE
    Problem Description
    symptom: Cannot Transfer Accounting Entry To The General Ledger
    accounting entry를 general ledger로 transfer 할수 없는 경우
    Accounting Error Code(에러 메세지) : The account code for this line is not valid
    symptom: Accounting entries have accounting entry creation errors
    accounting entries에 accounting entry creation error가 발생
    cause: The cause of this problem is still undetermined.
    아직 정확한 원인은 파악이 되지 않은 상태이다
    Workaround
    AP에서 appove된 후 에 GL에서 ccid가 disable된 송장을 다시 process를 하기 위한 스텝
    The Charge account did not create after running Payables Accounting Process.
    Charge account가 Payables Accounting Process를 실행한 후에도 생성되지 않는 경우
    사용자는 gl의 CCID를 enable해야만한다.
    업데이트된 accouting entry들의 accounting lines를 업데이트 해야 한다.
    그리고 AP Transfer to GL을 다시 돌린다.
    GL의 Journal Import에서 transaction은 다시 에러를 발생시킬것이다.
    이 경우 사용자는 Journal Import를 맞게 다시 적용해야한다.
    transaction이 성곡적으로 gl로 enter한후 CCID를 다시 업데이트 하고
    Journ Import를 실행한다.
    Solution Description
    Reference Documents
    -------------------

  • Extraction of data from SAP

    Hi Expert,
    When I did an extraction from SAP (ie FBL3N, FBL1N, etc) via export->local file->spreadsheet, the total balance from the extraction file is different from viewing SAP on screen.
    Why is this so ? If do a direct export->spreadsheet, it is ok. My company is in ECC 6.
    I also tried export->local file->unconverted. It is also showing a different figure when I sum up the figure in the file.
    Thanks.
    Angel.

    Hi,
    I understand that the format is not as nice & proper when i saved in in local file. I deleted the total line figure and any excess sub-total line . Only left with actual transactional data. But they do not add up to SAP on screen figure.
    Another colleague of mine did the same thing. And we both got the same figure on the local file after deleting unwanted rows. So, we did not make any error in accidentally removing some transactional data.
    Thanks.
    Angel.

  • Define field group in general ledger accounting

    what is the use of 'define field groups', which comes under general ledger accounting- master date- additional activities, & how can we assign it?

    Dear Siddhi,
    In IMG under
    Financial Accounting -> General Ledger Accounting -> G/L Accounts -> Master Data -> Preparations or
    Financial Accounting (New) -> General Ledger Accounting (New) -> Master Data -> G/L Accounts -> Preparations
    Field groups:
    Screen Fields are grouped into field groups. Field Status would idnentify the staus of particular field where as field status group would identify the status of group of fields.
    Example:
    Account control 
    Account managemen
    Document entry  
    Bank/financial de
    Interest calculat
    Joint venture   
    These groups would intern have fields.
    When creating a G/L account, you must specify an account group.                                                                               
    The account group determines:                                         
    o   the interval in which the account number must be
    o   which fields are required and optional entries when creating and changing master records
    o   which fields are suppressed when creating and changing master data.
    It enables you to control the layout of screens.
    You use account groups to combine accounts according to the above criteria (for example, a P&L account group, asset account group and material account group).                                              
    Hope this will help.
    Regards,
    Naveen.

  • Projects to General Ledger integration

    Does anyone have any experience creating GL journals from PA project allocations? We want to run allocations in projects and have the results go to the GL, based on PA accounting rules.
    Thanks

    Can you be a little more specific on what you are trying to do.
    I have experience in intergrating project accounting to the general ledger in a data warehouse using discoverer to show the results.
    The solution I developed for my compnay is to ensure all entries from all sub-ledgers including manual journal entries are moved to the data warehouse tables have project information based on PA autoaccounting rules.
    The company I work for was interested in viewing reports that cubed cost centers (dept's.) to projects and to translate all entries (not just account balances) to USD for thier foriegn set of books. So, projects can be seen company wide in USD at lowest entry level. The solution I gave them solved the problem and they are able to view reports and evaluate costs by cost centers and projects on an enterprise wide application.
    If this is what you are looking for let me know.
    about my self : I have a B.S. in Computer Science (Theoretical Track) and 17 yrs of accounting and book keeping experience including consolidation and multi-currency sets of books.

  • General Ledger Report

    Hi Friends,
    When I am trying to run General Ledger reports , no data are being fetched by the report.
    Please help :
    I want to generate a Ledger Account report for all the Natural Accounts, showing the opening, closing and detailed account transactions.
    Thanks,
    Soumya Prakash

    I am not a functional person, but have you checked Oracle General Ledger (User/Implementation/Reference) manuals?
    http://download.oracle.com/docs/cd/B53825_03/current/html/docset.html
    Thanks,
    Hussein

  • General ledger account codes

    How do i print view List and print the G/L accounts codes created in the sap system
    regards
    Noel

    Hi,
       You can used this transaction code S_ALR_87012328. This txn under "General ledger-> Information system ->General ledger report -> Master Data ->GL account list.
    **give me point if my answer solve your problem.
    -akma-

  • Please help how to undo the post in general ledger?

    dear all,,
    please help me ?
    we have R12 Orcale.
    I made a post in general ledger for closing purpose ??
    now I want to undo post whatever I posted should return back as it is ??
    how I can do it ??
    for more clarification
    for closing the account period we went to the general ledger than post journal after that we select the period name than we select find ?
    after find I made tick to all the transactions there than I posted ?
    my question How I can cancel the post or undo and keep it as it is ??
    please help

    A posted journal batch can not be deleted, You can reverse it to nullify the accounting effects of the posted journal batch.
    refer MOS note:
    Can a Posted General Ledger Journal Entry be Deleted? [ID 135532.1]
    regards,

  • Requirement of  General Ledger Trial Balance Detail Report Date wise

    Thanks for your reply
    We have to requirement of General Ledger Trial Balance Detail Report Date wise.
    Please help for that.
    Thanks.

    Take sum(Accounted_dr) - Sum(Accounted_Cr) till the Accounting Date..... from GL_BALANCES
    Edited by: 924750 on Sep 16, 2012 3:42 AM

  • General ledger transactional data extraction

    Hello all,
    My client has a need to extract all the general ledger transactional data from SAP system  to an external system ( to a hard disk or to a DVD) for future audit purpose, how can we achieve this,
    Please give your valid inputs

    tables BKPF & BSEG cover everything.
    might be better to use reports RFBELJ10 or RFHABU00
    depends what they want to see

Maybe you are looking for