Generate dynamic DataTable for Values selected from SelectManyListBox

I want to generate a datatable for values selected in a selectManyListBox,
DataTable will have three columns
1serial number
2.values selected from listbox
3.inputText for entering some data
Plz guide me how can i do this...
Thanx in advance!

Check http://balusc.xs4all.nl/srv/dev-jep-dat.html how to use datatables.

Similar Messages

How can we use C# to read dynamic parameter's value list from .rpt?

I'm using Cystal Report 2008. We know starting from CR XI we can create dynamic parameters, the list of items of this kind of parameter are fetching from database. So in general the SQLs to get the list of values for dynamic parameters are stored in the .rpt.
In Crystal Report Designer, if I preview a report with dynamic parameters, it will first query the database and then show the input dialog with list of values from database for user to choose. My question is can we implement the same thing by our C# code? I'm planning to use C# code to read this dynamic parameter's value list from .rpt and render them on the web page. Then pass back the user selected values to the .rpt to run the report after user make the choice. I didn't find any APIs can do this. Is it possible?
Thanks in advance!!

Hi,
Can you explain a bit in detail, I have similar scenario. I am using the following code but not getting the Column name for dynamic parameter list.
foreach (ParameterFieldDefinition prm
                          in reportDocument.DataDefinition.ParameterFields)
                try
                    string vParameterFieldName;
                    *vParameterFieldName = prm.ParameterFieldName.ToString();*
Shakeel

Default radio option (for Rating selection) from HAP_MAIN_DOCUMENT

We have a requirement to remove 'select a value' default radio option (for Rating selection) from HAP_MAIN_DOCUMENT. Can you please let me know is there any BADIs available to acheive this requirement ?

The normal way to do this is to set the option to "commit selected value immediately" and to place the code in the Keystroke event of the combo box. And instead of the first two lines that you have, you'd use something like:
if (!event.willCommit && event.changeEx !== "none") {
// Your other code goes here
The changeEx property will return the export value, if any, of the selected item.

How to generate an Interupt for DMA transfer from Counter on NI-PCI-6602

dear guys:
      how to generate an Interupt for DMA transfer from Counter on NI-PCI-6602,and I have set the DMA and DMA_INT, and also the global interrupt register.
but there is no Interupt generated in the Interupt callback function.And when I have set the DMA_INT and global interrupt register ,and then read the relevant register,the relevant bit is also 0.
     I suspect there is an Interupt register contral, like the MITE, you must write the value to 0xc4 for opening .
     there is some codes In my enclosure .What can I do?
Attachments:
TEST.C ‏21 KB

dear Steven_T:
        the registers are In my enclosure ,if you have some ideas,please reply me first time.thank you !
Attachments:
PCI6602.pdf ‏818 KB

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

Unable to generate XML's for BLOB datatypes from Concurrent program

Hi All,
I've a requirement to print images on rtf layout. Images are uploaded by end user through attahments men
there are getting stored in fnd_lobs tables.
for printing blob images we need to convert them into CLOB and generate XML's.
I've done the conversion through a function and calling the function in the select query which is generating XML when i run it from toad.
SELECT xmlgen.getXml(
'SELECT file_id,mob_getbase64String(file_data) photo
FROM fnd_lobs
WHERE file_id = 2490481'
,0
) FROM dual;
But the same thing we i registered as concurrent program (SQL*Plus) the program is running into error.
Output file
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'https://dbtdev5i.oracleoutsourcing.com/OA_CGI/FNDWRR.e...
Input truncated to 17 characters
^
Log file
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 10868311.
Review your concurrent request log and/or report output file for more detailed information.
Can anyone help me through on how to bypass this error and generate XML's.
Thanks in Advance
Jana

Hi Priya..,
I have changed the query and registered in apps and now i am able to generate XML's of the blob image and the same is getting printed on the tempate..
DECLARE
v_colb CLOB;
v_query VARCHAR2(1000);
BEGIN
v_query := 'SELECT file_id,mob_getbase64String(file_data) photo
FROM fnd_lobs fl,
fnd_documents_vl fd
WHERE fd.media_id = fl.file_id
AND (fd.end_date_active IS NULL
OR fd.end_date_active > SYSDATE)
AND fd.security_type = 2
AND fd.security_id = fnd_profile.value(''GL_SET_OF_BKS_ID'')';
--FND_FILE.put_line( FND_FILE.LOG,v_query);
v_colb := xmlgen.getxml (v_query, 0);
--DBMS_OUTPUT.put_line (v_query);
FND_FILE.put_line( FND_FILE.OUTPUT,v_colb);
END;
/

Multiple value selection from a base query to jump query in Web

Hi ,
System info
SAP BW 3.5               level-9
PI_BASIS -2004_1_640     level-8
SAP_ABA -640            Level-11
SAP_BASIS-640            Level-11
We have an inventory query with Profit Center,Plant & Material as characteristic. When we run the query, for example we get 10 materials for a plant. We want to keep those materials as filter value for material & want to jump to another query. The Jump query will only execute for those selected materials.
We can able to do the above scenario in BW BEx analyzer but we are not able to do in the web. Any input to resolve the issue are welcome.
example
Query A
Profit Center     Plant Material
PC12345          P542     M1
PC12345          P542    M2
PC12345          P542    M3
PC12345          P542     M4
PC12345          P542     M5
PC12345          P542     M6
PC12345          P542     M7
PC12345          P542     M8
PC12345          P542     M9
PC12345          P542     M10
Select M1 to M10 & right click "Keep filter value"
Then remove Material from the drilldown.
The query looklike this:
Query A
Material M1....M10
Profit Center     Plant
PC12345          P542
Then right click on P542 "Goto" jump query B.
Query B get executed on those selected materials(M1...M10) as we have a material variable in query B which is mandatory.
In a nut we are selecting more then one value & going to another query.
Regards
Mahendra

when u select KEEP FILTER VALUE at tat instance u can select only 1 value
HOW DID U SELECT   M1 & M10 bot within one hit.
instead of using this option.... did u try restriction
wat i mean is when u know before hand that u need only m1 & m10
remove material first from the display
it will automatically reside in Free chars
right click material and hit RESTRICT
select m1 & m10
hit okey
now u will see desired result...
now try jump query...
try removing the material variable from query b , just for experiementing purpose
and then repeat above exercise...
let us know how u go with it

Dynamically set a value based on value selected from LOV

Apex 4.2
I'm having trouble creating a dynamic action to set a value. I've used dynamic actions to hide and show regions but for some reason cannot set a value.
I have a select list --> P101_LIST. Source Type is 'Database Column'. Source value or expression is 'person_id' The query is as follows:
Select first_name, person_id
From Persons
I have a display value --> P101_DISPLAY. Source Type is 'Static Assignment'. Source value or expression I left blank.
I would like for every time the user selects a name from P101_LIST, the P101_DISPLAY item gets updated to show the corresponding value(person_id).
Because there are other page items / information on the page, I would prefer this to not submit / update the page. Wouldn't want other page items / information getting updated.
Any help on this matter would be greatly appreciated. Thanks in advance.

Hi,
Create a DA:
- event onChange P101_LIST
- Action: PL/SQL
- PL/SQL code:
:P101_DISPLAY := :P101_LIST;
Items to submit: P101_LIST
Item to return: P101_DISPLAY
And done.
Regards,
Joni

Set default values for StartMonth and EndMonth Parameter based on value selected from the previous parameter(Not cascading)

I have a scenario where it has multiple parameters like.....
Period which consists of "Year,Quarter,Month" as a values.
When user selects "Year" value in "Period" Parameter then "FromMonth" has to set its default value as 36th month from now.
Example: If user selects "Year" then "FromMonth" has to show "April-11".
When user selects "Year" value in "Period" Parameter then "EndMonth" has to set its default value as current month.
Example: If user selects "Year" then "FromMonth" has to show "March-14".
If user selects "Month" Value in "Period" Parameter then it has to allow user to select the Month Range and again if user selects "Year" value in "Period" Parameter then StartMonth has to show 36th month from now and
End Month has to show current month.
Please help me how to resolve this issue.
Thanks in Advance.

Hi Vasu_479,
First, you need to create a dataset to set the StartDate and EndDate parameter's value using the query provided by Visakh. And then use the StartDate and EndDate parameter to filter the data in MDX query. Here is a sample query for your reference.
select
{[Measures].[Internet Sales Amount]
} on columns,
{[Date].[Date].members} on rows
from(
select
STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
) on columns
from [Adventure Works]
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Generate xml using FOR XML PATH from table with hierarchy

I need to create xml from a table like:
EL1 EL2 EL3 Attr01 Attr02 Attr03 Attr04
E10, , ,a,b,c,d
E10,E1010, ,a,b,c,d
E10,E1010,E101010,a,b,c,d
E10,E1010,E101020,a,b,c,d
E10,E1010,E101030,a,b,c,d
E10,E1020, ,a,b,c,d
E10,E1020,E102010,a,b,c,d
E20, , ,a,b,c,d
E20,E2010, ,a,b,c,d
E20,E2010,E201010,a,b,c,d
E20,E2020, ,a,b,c,d
E20,E2020,E202010,a,b,c,d
E20,E2020,E202020,a,b,c,d
The hierarchy is EL1--EL2--EL3, and the 3 columns should be elements of xml;
The other for columns Attr01,Attr02,Attr03,Attr04 should be attributes of xml;
The actual table could have more than 500 rows(there are many values for El1,EL2,and EL3).
The expected xml should like:
<root>
<E10 Attr01="a" Attr02="b" Attr03="c" Attr04="d">
<E1010 Attr01="a" Attr02="b" Attr03="c" Attr04="d">
<E101010 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
<E101020 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
<E101030 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
</E1010>
<E1020 Attr01="a" Attr02="b" Attr03="c" Attr04="d">
<E102010 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
</E1020>
</E10>
<E20 Attr01="a" Attr02="b" Attr03="c" Attr04="d">
<E2010 Attr01="a" Attr02="b" Attr03="c" Attr04="d">
<E201010 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
</E2010>
<E2020 Attr01="a" Attr02="b" Attr03="c" Attr04="d">
<E202010 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
<E202020 Attr01="a" Attr02="b" Attr03="c" Attr04="d" />
</E2020>
</E20>
</root>
I create a sample Src table:
CREATE TABLE Src
EL1 VARCHAR(10),
EL2 VARCHAR(10),
EL3 VARCHAR(10),
Attr01 VARCHAR(10),
Attr02 VARCHAR(10),
Attr03 VARCHAR(10),
Attr04 VARCHAR(10)
GO
INSERT INTO Src
(EL1,EL2,EL3,Attr01,Attr02,Attr03,Attr04
SELECT 'E10','','','a','b','c','d'
UNION SELECT 'E10','E1010','','a','b','c','d'
UNION SELECT 'E10','E1010','E101010','a','b','c','d'
UNION SELECT 'E10','E1010','E101020','a','b','c','d'
UNION SELECT 'E10','E1010','E101030','a','b','c','d'
UNION SELECT 'E10','E1020','','a','b','c','d'
UNION SELECT 'E10','E1020','E102010','a','b','c','d'
UNION SELECT 'E20','','','a','b','c','d'
UNION SELECT 'E20','E2010','','a','b','c','d'
UNION SELECT 'E20','E2010','E201010','a','b','c','d'
UNION SELECT 'E20','E2020','','a','b','c','d'
UNION SELECT 'E20','E2020','E202010','a','b','c','d'
UNION SELECT 'E20','E2020','E202020','a','b','c','d'
GO
I tried to use FOR XML PATH to generate xml for the sample data. When the records increase to a few hundreds, it's not a good idea.
Here is my script:
SELECT
(SELECT Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E101010'
FOR XML PATH('E101010'),TYPE
) AS 'node()'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E101020'
FOR XML PATH('E101020'),TYPE
) AS 'node()'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E101030'
FOR XML PATH('E101030'),TYPE
) AS 'node()'
FROM Src
WHERE EL2 = 'E1010' AND (EL1 <>'' AND EL3 ='')
FOR XML PATH('E1010'),TYPE
) AS 'node()'--1010
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E102010'
FOR XML PATH('E102010'),TYPE
) AS 'node()'
FROM Src
WHERE EL2 = 'E1020' AND (EL1 <>'' AND EL3 ='')
FOR XML PATH('E1020'),TYPE
) AS 'node()'--1020
FROM Src
WHERE EL1 = 'E10' AND (EL2 ='' AND EL3 ='')
FOR XML PATH('E10'),TYPE) 'node()'
,(SELECT Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E201010'
FOR XML PATH('E201010'),TYPE
) AS 'node()'
FROM Src
WHERE EL2 = 'E2010' AND (EL1 <>'' AND EL3 ='')
FOR XML PATH('E2010'),TYPE
) AS 'node()'--2010
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E202010'
FOR XML PATH('E202010'),TYPE
) AS 'node()'
,( SELECT
Attr01 AS '@Attr01'
,Attr02 AS '@Attr02'
,Attr03 AS '@Attr03'
,Attr04 AS '@Attr04'
FROM Src
WHERE EL3 = 'E202020'
FOR XML PATH('E202020'),TYPE
) AS 'node()'
FROM Src
WHERE EL2 = 'E2020' AND (EL1 <>'' AND EL3 ='')
FOR XML PATH('E2020'),TYPE
FROM Src
WHERE EL1 = 'E20' AND (EL2 ='' AND EL3 ='')
FOR XML PATH('E20'),TYPE) AS 'node()'
FOR XML PATH(''),ROOT('root')
If I get a few hundreds of rows, how huge the script should be. Does anyone have better solution for this? Thanks.
Tao

wBob,
Thanks! And sorry for late feedback.
The XSD requires the xml structures like the following
<Schools>
<School01>Some school</School01>
<School02>Some other school</School02>
</Schools>
I have to use the number in the element name.
Right now I just use the nested FOR XML PATH, although I have to write thousand lines code.
Thanks anyway.
Tao
Tao

"ORA-21700: object does not exist or is marked for delete" select from ADT

Posted this in OLAP section as well, but since this is Object technology, I thought I would repeat it here. Sorry about the duplication.
BTW, I'm using Oracle9i 9.2.0.4.1.
I'm trying to create a script that can automate the process of generating abstract data types for use in an OLAP_TABLE function. I'm following the examples in the documentation. Everything runs great the FIRST time I run my script, but when I drop my types and re-create them, when I run the next SELECT statement against the OLAP_TABLE function, I get:
ERROR at line 1:
ORA-21700: object does not exist or is marked for delete
My script drops the ADTs before creating, but somehow they are not REALLY being dropped.
SET ECHO ON
SET SERVEROUT ON
DROP TYPE ts_table_6;
DROP TYPE ts_row6;
CREATE TYPE ts_row6 AS OBJECT(
CONJ2002 VARCHAR2(400),
CONJ2002_DATA number(16),
PERIOD VARCHAR2(10),
PERIOD_NAME VARCHAR2(20));
CREATE TYPE ts_table_6 AS TABLE OF ts_row6;
SELECT CONJ2002, period, period_name, conj2002_data FROM TABLE(OLAP_TABLE(
'REFVLMTA DURATION QUERY',
'ts_table_6',
'limit CONJ2002 to first 3',
'MEASURE CONJ2002_DATA from CONJ2002.DATA
DIMENSION CONJ2002 from CONJ2002
DIMENSION PERIOD from PERIOD WITH
ATTRIBUTE PERIOD_NAME from period.name'));
Again, it works the first time, but not the second time. I need to bump up the ADT names to ts_row7 and ts_table_7. SQL Plus says the types are being dropped.
Any ideas?
Dan Vlamis [email protected]

Hi Dan
What append if you do a connect between the DROP and the CREATE statements?
Chris

Generating Dynamic Query for Ad-Hoc Reports

Hello,
What is the best way to create a dynamic query to generate ad-hoc reports? I have a couple of ideas but not sure which would work best and be most flexible.
I would like our users to be able to check checkboxes for what data they would like returned in their report. The data would be pulled from a number of tables, 10+, depending on what pieces of data they checked.
Should I write one dynamic query, with a bunch of IF statements in it?
Should I write many individual queries and then join them together in a temp query?
Should I create a temp table on our SQL server which contains the data from all of the tables; then query that? (I am worried about data being out-of-date with this option.)
Which one of these solutions should I go with or is there a better solution that I am not considering?
Thanks for the help.
Josh

Do you mean a Stored Procedure? Would the Stored Procedure then have one query on it with a bunch if IF statements? Maybe a bad example, but something like this?
Yep.
I haven't written a proc for a coupla years (I have DB people to do that for me now, bless 'em), but every DB is different, so the approach will vary depending on what DB you have. It's perhaps time to buy a book or do a google or something.
Adam

Generating dynamic columns for a report

Hi all,
      Can anybody pls. tell me how to output dynamic columns in a report. my req. is that i've to generate so many columns as there are no. of unique(a particular field value) rows in my internal table. for e.g say suppose i've 5 rows in my internal table which has 2 fields, one short text & it's corresponding value. so now my report output shud have 5 columns with the short text as the column heading & the their corresponding values below each column heading. i heard it can be done thru field-symbols. can anyone pls. guide me.

Hi Sushma,
This piece of code might be useful.
The following sections will help you to understand the steps required to define a Dynamic ALV.
Following symbol signifies:
Þ                    Important
Main Steps Required
The following are the main steps that are to be performed for defining a dynamic Alv
1.       Defining a field catalog
2.       Defining the dynamic table
3.       Filling data into the table
4.       Displaying ALV list
Defining a field catalog
The purpose of defining a field catalog first in case of Dynamic ALV is somewhat different than in case of normal ALV. In case of Dynamic ALV the field catalog is used to define the final internal table that will hold the data, and would be used to display the final output.
Þ It is very important to remember that the field catalog table be refreshed first, else it might give an error.
For example:
DATA: T_FIELDCAT TYPE LVC_T_FCAT,
L_FIELDCAT TYPE LVC_S_FCAT.
   Refresh T_FIELDCAT.
CLEAR L_FIELDCAT.
L_FIELDCAT-FIELDNAME = 'LIFNR'.
L_FIELDCAT-INTTYPE = ''.
L_FIELDCAT-OUTPUTLEN = 10.
L_FIELDCAT-COLTEXT = TEXT-002.
APPEND L_FIELDCAT TO T_FIELDCAT.
Defining the dynamic table.
This table will hold the final data that needs to be displayed. To declare the table the following things need to be done.
Declare a field symbol
Displaying Alv List
This is done in the same way as we do for normal Alv. Call function REUSE_ALV_GRID_DISPLAY and pass the field catalog table in the export parameters and the dynamic table in Tables.
Reward Points if it is helpful.
Reagrds,
Kiran I

Cannot generate dynamic alert for initial column in SNP.

Hello,
I have an SNP alert macro with a simple condition running from Initial column for 158 weeks. The alert is generated correctly for all other weeks but not for initial column.
The IF condition works correctly because a CELL_BG() in the same alert macro is correctly changing the color of the Initial column cell.
Is there some setting I need to make to generate alert for initial column?
Regards,
SS

Hello jejeje,
thanks for your efforts - what you describe is something users have found out on our side too - a problem remains: you can save this setting "Period from last Selection" and it brings you to the INITIAL column but: once you have scrolled forward in the SNP data view (so that the INITIAL column has disappeared) and you leave the SNP data view or select another product ... it "remembers" that you last time left the data view NOT having INITIAL column as a start column.
So, my users say that they scroll back to INITIAL column before selecting another part or using another SelectionID or leaving the SNP data view ... and of course they hate this since they have to do this a few hundred times a day worse case.
We had a call open to SAP on this and I told them that is about productivity and usabaliity issue moving from SCM5.0 to SCM7.0 - but they have nothing more to say than "not supported anymore" - and the ultimate solution is / will be to modifiy SAP SCM standard coding - unless somebody from SAP is reading the discussioons here and is dedicated to help their customers which pay millions every year into SAP support fees.
Thanks for your responses and effort !
Regards
Thomas

Link an image field to a value selected from a list

Hello!
I'm newbie to Dreamweaver - PHP and I have a problem. I have
made a list that displays the names of all the images of my
database. Now, I want every time the user selects a value from the
list the corresponding image appears on the same page. How can I do
this?
Please help me!!!

Hi Stefan, Thanks for responding to my last mail. I am talking about the XFA(xml form architecture). Actuallly i am working on Picture form field in PDF which Adobe has newly introduced. In this type of form field , user can add an image. But i am not able to differentiate between the "Picture form field" and "push button". The only thing i have found that the picture form field entry exist in dataset but not the Push button. 29 0 obj << /Length 13533 >> stream <xfa:datasets xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><xfa:data><form1><IMAGE href="" xfa:contentType="image/jpg"></IMAGE></form1></xfa:data></xfa:datasets> endstream endobj In the above case the "Image" is a picture form field. Another difference i found between "push Button" and "Picture Form Field" is the MK dictionary as below. Pushbutton ----------- /MK << /BG [ 0.831375 0.815689 0.784317 ] /CA (Print Form) /BC [ 0 0 0 ] >> Picture form Field ------------------- /MK << /TP 1 /I 17 0 R >> But i want to find the exact difference. May be some bit in Form Field Flag(ff) signify the picture form field. It will be very helpful to me if you could tell me the exact difference. Kind Regards, Shekhar Kumar Keshri

Generate dynamic DataTable for Values selected from SelectManyListBox

Similar Messages

Maybe you are looking for