Generate to File not working

Hai,
we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It shows
an error like Umimplemented Error (rep-0999).There is one default printer attached to m/c. and the operation system is winows nt.This is working when running the report in report builder.it is not working when called through menu.Pls help me to solve this problem.
dilip

Hi,
I am not sure what do you want to convey here - "It is working with Reports builder and not working with menu". From Report builder, only way to generate the otput to file is to go through menu, there are no other shortcut or toolbar icon present. Do you want to say, it works when you run to previewer but is failing when you generate to a file. To give you a hint:
1. Does the problem exist with only this report or with all the reports?
2. If the problem is with all the reports, then there is a setup problem.
3. Try running PRINTER DRIVER TEST against your printer, to check it is ok?
4. Check that the login under which you are trying to run the report, has the priviledge to print with this default printer.
5. Try changing the printer driver?
If this does not solve the problem, please contact Oracle support to resolve this issue.
Thanks,
Rohit

Similar Messages

Y Generate to File not working?

Hai,
V are facing some probelms with reports6i.
1.we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It shows
an error like Umimplemented Error (rep-0999).How to solve this problem.
2.In one report we are using CLOB field.but when we take the print output of
this field some of the characters are missing in print out.the problem what
we think is that, there is no entre key padding when a word wrap is
occuring.We have to give it manually which is not applicable in all
cases.Please give some methods to solve these probelms.
Please treat this as an urgent matter.
thanking you,
dilip

hai,
regarding the 1st point there is one default printer attached to my m/c.but still the same error is coming. is it bcoz v r using command line arguments.but there should not be any link how u r calling the reopt.do v need to to pass any argument for doing this operations.my generate to file menu is enabled any way.pls help me to solve this problem.
regards,
dilip

[svn] 1967: * Fixed issue where -keep-generated-actionscript would not work

Revision: 1967
Author: [email protected]
Date: 2008-06-05 08:12:21 -0700 (Thu, 05 Jun 2008)
Log Message:
* Fixed issue where -keep-generated-actionscript would not work
properly when -generate-abstract-syntax-tree was enabled, which is
now the default.
tests Passed: checkintests
Needs QA: YES
Needs DOC: NO
API Change: NO
Reviewer: clucier
Code-level description of changes:
CompilerConfiguration.java
Modified setKeepGeneratedActionScript() to force AST generation
off when the value is true.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/CompilerConfiguration.java

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

File Generate Image Assets not working for me: no Javascript Plugin :-\

Do I need to reinstall entire Adobe PS CC 2014 application?
The folder /Applications/Adobe Photoshop CC 2014/Plug-ins/Generator/ is in fact empty when I check. In fact so is the Plug-ins folder more generally.

Well I contacted Adobe Support via chat and after a long time getting them to understand the problem they conformed that there is no Adobe plug-in in the Plug-ins Folder, in spite of there being a Generator folder inside the Plug-ins folder it should be empty and the whole plug-in folder: it's default install state is empty.
A reinstall did however fix the problem. Perhaps Javascript was not working, given the Dialog message.

Mac Finder previews for .AI files not working

[I'm using fully updated OS X 10.8.5, using Illustrator CS6 16.0.4]
In the Finder, all my .AI files show up only as a generic AI file icon. Trying to Preview the files in the Finder also only show the generic icon.
I've tracked down the QuickLook Generator locations, and found that I've got a generator named "illust.qlgenerator". But when I run in the Terminal.app this command: "qlmanage -t <ai file>" tells me this:
[WARNING] Plug-in at file://localhost/Library/QuickLook/illust.qlgenerator/ is 32bit
[ERROR] Can't load plug-in at file://localhost/Library/QuickLook/illust.qlgenerator/: The bundle “PDF” couldn’t be loaded because it doesn’t contain a version for the current architecture.
That Quick Look Generator is only 32-bit, which seems to be causing problems.
When I moved it to a different folder to disable it, then the native PDF.qlgenerator takes over, and puts the obnoxious grid behind the previews.
Problems with the OS X PDF QuickLook generator:
Obnoxious grid behind the actual content instead of resizing to maximize the thumbnail
Native .AI files saved without PDF compatibility show no preview, just "This is an AI file without PDF content"
To get the preview, saving with PDF compatibility would double the file size. Double.
And I still get the grid.
Is there a native Illustrator QuickLook Generator? I don't want to uninstall and reinstall CS6 just to find there's no difference. Does CS6 install any better previews than I'm getting? Another Mac user with the same setup shows beautiful full-color previews of the same AI sample files without requiring PDF compatibility or the obnoxious grid.
Thanks
Darryl Z

Hi Monika,
Unfortunately, I neglected to mention that because I work with very large illustrations with many layers, paths and nested symbols the PDF preview is not very fast.
I prefer not to save a complete pdf inside my AI files because it multiplies the file size which I find slows the cloud synchronisation of the very large files I work on.
A quick raster preview would be the most performant option, lazy loading any available pdf or ai render if the item was enlarged.
Thanks,
Luke

Drag & Drop of a file not working in Ubuntu & other linux

Hi All,
I am working on a project,in which it has the requirement of dragging the files
from a JList present inside a JFrame to the desktop.
First I tried to get a solution using dnd API but could not. Then i googled and i got an application which is
working perfectly in both Windows and MAC Operating systems, after I made few minor changes to suit my requirements.
Below is the URL of that application:
http://stackoverflow.com/questions/1204580/swing-application-drag-drop-to-the-desktop-folder
The problem is the same application when I executed on Ubuntu, its not working at all. I tried all available options but could not trace out the exact reason.
Can anybody help me to overcome this issue?
Thanks in advance

Hi,
With the information you provided and through some information found on google i coded an application. This application is able to do the drag and drop of an item from the Desktop to Java application on Linux Platform, but i am unble to do the viceversa by this application.
I am including the application and the URL of the information i got.
[URL Of Information Found|http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4899516]
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.datatransfer.DataFlavor;
import java.awt.datatransfer.Transferable;
import java.awt.datatransfer.UnsupportedFlavorException;
import java.awt.dnd.DropTarget;
import java.awt.dnd.DropTargetDragEvent;
import java.awt.dnd.DropTargetDropEvent;
import java.awt.dnd.DropTargetEvent;
import java.awt.dnd.DropTargetListener;
import java.io.File;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;
import javax.swing.DefaultListModel;
import javax.swing.JComponent;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JList;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.TransferHandler;
import javax.swing.WindowConstants;
public class DnDFrame extends JFrame implements DropTargetListener {
     private DefaultListModel listModel = new DefaultListModel();
     private DropTarget dropTarget;
     private JLabel jLabel1;
     private JScrollPane jScrollPane1;
     private JList list;
     List<File> files;
     /** Creates new form DnDFrame */
     public DnDFrame() {
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          initComponents();
          dropTarget = new DropTarget(list, this);
          list.setModel(listModel);
          list.setDragEnabled(true);
          list.setTransferHandler(new FileTransferHandler());
     @SuppressWarnings("unchecked")
     private void initComponents() {
          GridBagConstraints gridBagConstraints;
          jLabel1 = new JLabel();
          jScrollPane1 = new JScrollPane();
          list = new JList();
          setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
          getContentPane().setLayout(new GridBagLayout());
          jLabel1.setText("Files:");
          gridBagConstraints = new GridBagConstraints();
          gridBagConstraints.gridwidth = GridBagConstraints.REMAINDER;
          gridBagConstraints.anchor = GridBagConstraints.WEST;
          getContentPane().add(jLabel1, gridBagConstraints);
          jScrollPane1.setViewportView(list);
          gridBagConstraints = new GridBagConstraints();
          gridBagConstraints.gridwidth = GridBagConstraints.REMAINDER;
          gridBagConstraints.fill = GridBagConstraints.HORIZONTAL;
          getContentPane().add(jScrollPane1, gridBagConstraints);
          pack();
     public void dragEnter(DropTargetDragEvent arg0) {
     public void dragOver(DropTargetDragEvent arg0) {
     public void dropActionChanged(DropTargetDragEvent arg0) {
     public void dragExit(DropTargetEvent arg0) {
     public void drop(DropTargetDropEvent evt) {
          System.out.println(evt);
          int action = evt.getDropAction();
          evt.acceptDrop(action);
          try {
               Transferable data = evt.getTransferable();
               DataFlavor uriListFlavor = null;
               try {
                    uriListFlavor = new DataFlavor("text/uri-list;class=java.lang.String");
               } catch (ClassNotFoundException e1) {
                    // TODO Auto-generated catch block
                    e1.printStackTrace();
               System.out.println("data.isDataFlavorSupported(DataFlavor.javaFileListFlavor: " +
                         data.isDataFlavorSupported(DataFlavor.javaFileListFlavor) );
               if (data.isDataFlavorSupported(DataFlavor.javaFileListFlavor)) {
                    files = (List<File>) data.getTransferData(DataFlavor.javaFileListFlavor);
                    for (File file : files) {
                         listModel.addElement(file);
               }else if (data.isDataFlavorSupported(uriListFlavor)) {
                    String data1 = (String)data.getTransferData(uriListFlavor);
                    files = (List<File>) textURIListToFileList(data1);
                    for (File file : files) {
                         listModel.addElement(file);
                    System.out.println(textURIListToFileList(data1));
          } catch (UnsupportedFlavorException e) {
               e.printStackTrace();
          } catch (IOException e) {
               e.printStackTrace();
          } finally {
               evt.dropComplete(true);
     private static java.util.List textURIListToFileList(String data) {
          java.util.List list = new java.util.ArrayList(1);
          for (java.util.StringTokenizer st = new java.util.StringTokenizer(data,"\r\n");
          st.hasMoreTokens();) {
               String s = st.nextToken();
               if (s.startsWith("#")) {
                    continue;
               try {
                    java.net.URI uri = new java.net.URI(s);
                    java.io.File file = new java.io.File(uri);
                    list.add(file);
               } catch (java.net.URISyntaxException e) {
               } catch (IllegalArgumentException e) {
          return list;
     private class FileTransferHandler extends TransferHandler {
          @Override
          protected Transferable createTransferable(JComponent c) {
               JList list = (JList) c;
               List<File> files = new ArrayList<File>();
               for (Object obj: list.getSelectedValues()) {
                    files.add((File)obj);
               return new FileTransferable(files);
          @Override
          public int getSourceActions(JComponent c) {
               return COPY;
     static {
          try {
               uriListFlavor = new
               DataFlavor("text/uri-list;class=java.lang.String");
          } catch (ClassNotFoundException e) {
               e.printStackTrace();
     private class FileTransferable implements Transferable {
          private List<File> files;
          public FileTransferable(List<File> files) {
               this.files = files;
          public DataFlavor[] getTransferDataFlavors() {
               return new DataFlavor[]{DataFlavor.javaFileListFlavor,uriListFlavor};
          public boolean isDataFlavorSupported(DataFlavor flavor) {
               if(flavor.equals(DataFlavor.javaFileListFlavor) || flavor.equals(uriListFlavor))
                    return true;
               else
                    return false;
          public Object getTransferData(DataFlavor flavor) throws
          UnsupportedFlavorException, java.io.IOException {
                  if (isDataFlavorSupported(flavor) && flavor.equals(DataFlavor.javaFileListFlavor)) {
                    return files;
               }else if (isDataFlavorSupported(flavor) && flavor.equals(uriListFlavor)) {
                    java.io.File file = new java.io.File("file.txt");
                    String data = file.toURI() + "\r\n";
                    return data;
               }else {
                    throw new UnsupportedFlavorException(flavor);
     private static DataFlavor uriListFlavor;
     static {
          try {
               uriListFlavor = new
               DataFlavor("text/uri-list;class=java.lang.String");
          } catch (ClassNotFoundException e) {
               e.printStackTrace();
     public static void dumpProperty(String name) {
          System.out.println(name + " \t" + System.getProperty(name) );
     public static void main(String[] args) {
          String[] props = {
                    "java.version",
                    "java.vm.version",
                    "java.vendor",
                    "os.name",
          "os.version"};
          for (String prop : props) {
               dumpProperty(prop);
          Runnable r = new Runnable() {
               public void run() {
                    DnDFrame f = new DnDFrame();
                    f.setVisible(true);
          SwingUtilities.invokeLater(r);
}Please Suggest me in this.

Auto-generated executable jar not working properly

Hi all,
I have a desktop application. that I can run it from Netbeans with all its functionalities but when I click the generated jar file the application run wel but some of its functionalities was not working.
Any idea ...
Thank you in advance

Yousef_Aqarbeh wrote:
I have a desktop application. that I can run it from Netbeans with all its functionalities but when I click the generated jar file the application run wel but some of its functionalities was not working.Possibly you have not added your resources to the Jar file or are trying to get these resources as files, and files don't exist inside of Jars (AFAIK).
Any idea ...For more help, better help, and helpful help, create a [Short, Self Contained, Correct (Compilable), Example|http://sscce.org] or SSCCE. This is a small program that compiles, runs, demonstrates your problem, and contains no extraneous code. Please read the link, and have a go at it. Best of luck.

Application files not working...please help.

I have an imac g3 400MHz when i start it up it goes through its normal starting phases but without any error messages and when the color screen pops up , it freezes so the only way i can start the computer is with extensions off. Once their any application file i try to open does not work but i do get messages that read for example:"The application "Apple DVD Player" could not be opened because "ControlStripLib" could not be found". Other messages read similiarly. Can you offer any suggestions or do you require further information about my problem?
Thanks.
Rob Arrona
imac g3 400mhz Mac OS 9.0.x

Open the Servers folder inside the System Folder and throw away anything that you don't recognize, and restart your computer normally. If the issue persists, open the Extensions Manager control panel, turn off half of your extensions, and restart the machine. Repeat the process of turning off half of the remaining extensions and restarting until you've narrowed down the extension causing your issue.
The messages about items not being found are due to the extensions not being loaded.
(11587)

Edge.oam animation file not working in Muse

Anybody tell me what I'm doing wrong?
I've created an edge animation, published an .oam file and placed it on a Muse wepage (no prob).
Preview in Muse works beautifully.
Preview in browser from Muse works beautifully.
Export Muse to HTML and Edge animation not displaying – looked at the code, shows an iframe with link to edge html, but just not working.
...help please

Someone please help me with this... I dont understand where the src path should point to when updated? Can you give an example path. I am not using edge animate but instead HYPE 3 which is relatively the same thing, exports html animations as an OAM or html file. When I use the OAM in muse it previews fine in browser and in Muse. But when I publish it shows a blank box. I looked at the code and see the iframe pointing to assets/example/example.html.
I've tried exporting the Muse file as HTML after I've placed the OAM widget in Muse.. Then I navigate to the assets file and open the HTML file and try and locate the iframe code line but it does NOT exist. But if i Publish the site with Muse and OAM widget and use the developers tools I can see the iframe. After that I've tried going through filezilla to the assets folder and opening the HTML file but still NO iframe code line exists. I only find src for .js code.
PLEASE HELP... would really like to integrate these animations into my projects.
Thanks

Sharepoint 2013, event receiver to rename files not working

I coded an event receiver (ItemAdding) that renames for example a .txt file to a .text file (it does not matter the extensions, it is just an example). In my code what I do is to an SPFile.MoveTo operation. It works fine in SP2010 but when I execute
the same code in SP 2013, when the operation is done using IE I get the text "Sorry, something went wrong" and then "File Not Found".
In the logs this is what I see:
12/23/2013 15:48:49.16 w3wp.exe (0x17B0)                       0x0AC8 SharePoint Foundation
General                       ai1wu Medium System.IO.FileNotFoundException: The system cannot find the file specified.
(Exception from HRESULT: 0x80070002), StackTrace:    at Microsoft.SharePoint.SPWeb.GetFileOrFolderProperties(String strUrl, ListDocsFlags listDocsFlags, Boolean throwException, SPBasePermissions& permMask)     at Microsoft.SharePoint.SPFile.PropertiesCore(Boolean
throwException)     at Microsoft.SharePoint.SPFile.get_Length()     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.OnSubmit(Object o, EventArgs e)     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadExPage.OnSubmit(Object
o, EventArgs e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessReque... f72b639c-77b1-5045-c3a2-b23f24ae71c0
It's clear that the Sharepoint upload code tries to do things with the original name and it does not realize that it was renamed.
Can I do something from my event receiver code like using the AfterProperties to bypass this error?
Thanks

Hi Dennis,
The issue still persists. Here is the code:
        public override void ItemAdded(SPItemEventProperties properties)
            SPSecurity.RunWithElevatedPrivileges(delegate()
                try
                    OutputDebugStringA("Inside ItemAdded");
                    string szHttpUrl = properties.WebUrl + "/" + properties.AfterUrl;
                    SPWeb openedWeb = properties.Web.Site.OpenWeb(properties.Web.ID);
                    SPFile spf = openedWeb.GetFile(szHttpUrl);
                    EventFiringEnabled = false;
                    string szUrl = properties.AfterUrl;
                    szUrl = szUrl + ".renamed";
                    string szNewFileName;
                    if (szUrl.LastIndexOf('\\') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('\\') + 1);
                    else if (szUrl.LastIndexOf('/') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('/') + 1);
                    else szNewFileName = szUrl;
                    if (properties.ListItem != null)
                        properties.ListItem["Title"] = szNewFileName;
                        properties.ListItem.Update();
                    spf.MoveTo(szUrl);
                    EventFiringEnabled = true;
                    base.ItemAdded(properties);
                    OutputDebugStringA("Renaming to " + szUrl);
                catch (System.Exception exception)
                    OutputDebugStringA("ItemAdded ERROR: " + exception.ToString());

Delete Dataset File not working

Hi All,
I am trying to delete file from application server (AL11) directory after processing using DELETE DATASET FILE is not working , after processing also file still exists.
My code is like this,
*&      Form backup_file
      The file has been processed. Go ahead and copy it to the
      backup directory and delete it from the processing directory.
FORM backup_file .
DATA: lv_oldfile TYPE string,
        lv_backup TYPE string,
        l_rc TYPE i.
IF p_appl = 'X'. "Unix file
    lv_oldfile = wa_files-filename.
Replace the directory name with the backup directory.
    REPLACE p_dir IN wa_files-filename WITH p_back.
Tack date/time onto the end of the file name to avoid duplicate
files
    CONCATENATE wa_files-filename
                sy-datum
                sy-uzeit
              INTO wa_files-filename.
    OPEN DATASET wa_files-filename FOR OUTPUT
                                   IN TEXT MODE
                                   ENCODING DEFAULT.
    IF sy-subrc NE 0.
      f_backup_error = 'X'.
      EXIT.
    ELSE.
    Write the file contents to the new backup file.
      LOOP AT itab_input INTO wa_input.
        TRANSFER wa_input TO wa_files-filename.
      ENDLOOP.
    ENDIF.
Close the backup file.
    CLOSE DATASET wa_files-filename.
Delete the original file from the processing directory.
if sy-subrc = 0.
    DELETE DATASET lv_oldfile.
endif.
endform.
Thanks Everyone!

HI,
You have to check the value of Sy-subrc after the delete statement,
and the value present in the variable lv_oldfile that if there is correct
value in the variable populated or not.
Moreover after assigning the value to variable lv_oldfile in the step
lv_oldfile = wa_files-filename.
then you should use this variable lv_oldfile only for open dataset and close dataset also.
Hope ir helps
Regards
Mansi

Calendar Alarm Open FIle not working in Mountain Lion

Recently upgraded my mac mini server to 10.8.2 Mountain Lion. I need it to open a particular Filemaker file every morning, and close the application every night. Used to have a simple alarm in iCal set to do this with Open File and then a very simple Automator script to close the program at a scheduled time, also in iCal. Worked fine. Now, in trying to recreate this, it doesn't work - I make the scripts, and if I set them for a time I can test them (ie. 5 minutes from now), they work as planned, but they will not function on their own at the scheduled time. I thought it might be going to sleep, so I set Energy Saver to Never go to sleep, unchecked "Put hard disks to sleep when possible", and checked "Wake for network access". Still not working. Any thoughts? Any idea how to even troubleshoot this?

I thought I was on to something, but then I re-read your post and saw that you've successfully tested your scripts in Calendar. So, all I've got left to offer is a silly question: has the calendar been set to ignore alerts? I ask because just within the last few days I created an Automator calendar alarm, tested it successfully (in the same fashion as you), and set it off to run on its merrily-scheduled way, only to discover it wasn't firing on its own. Like you, I double-checked my Energy Saver settings and it looked like things should work just fine. What I finally found was that at some point during all my testing and fiddling I'd ticked the "Ignore alerts" box for the calendar, and that's what was keeping my script from firing.

Animated gif files not working in FF5 ok in every other browser

Hi .
I am having problems getting animated gifs to play in firefox 5 i am using a photo gallery script to show these files it works in every other browser i have access to (most of them on Linux and windows Xp and win7 ) if i use FF5 as a file manager and navigate to the files they run but not from a web page this is only with firefox 4 and 5 not got previous to 4 to test .

Right . this looks like it may be a problem with the way FF5 is handling various methods of viewing images i use the following code .
<pre><nowiki><a class="thumbnail" href="#thumb"><img src="photos/IMG_7039 EOS-1D Mark III copy.jpg" width="100px" height="75px" border="0"><span><img src="photos/Animations/IMG_7039 EOS-1D Mark III copy.gif"></span></a></nowiki></pre>
along with css .
<pre><nowiki>(
.gallerycontainer{
position: relative;
/*Add a height attribute and set to largest image's height to prevent overlaying*/
.thumbnail img{
border: 1px solid blue;
margin: 0 5px 5px 0;
.thumbnail:hover{
background-color: transparent;
.thumbnail:hover img{
border: 1px solid blue;
.thumbnail span{ /*CSS for enlarged image*/
position: fixed;
background-color: lightyellow;
padding: 5px;
left: -600px;
border: 1px dashed gray;
visibility: hidden;
color: black;
text-decoration: none;
.thumbnail span img{ /*CSS for enlarged image displays the large image*/
border-width: 4;
padding: 12px;
.thumbnail:hover span{ /*CSS for enlarged image*/
visibility: visible;
top: 0;
left: 230px; /*position where enlarged image should offset horizontally */
z-index: 50;
)</nowiki></pre>
to create the gallery now if i navigate directly to the dir with the gif images in they work ok but if i use the gallery method they fail .
Tried safe mode no addons no change ..

HTML generated by PLSQL not working when migrating from 9i to 10g

Hello everybody,
We migrated a 9i database (web+application server on Windows) to 10gR2 (web+application server on Linux). The database contains a package that dynamically generates HTML and JSP tags .
Problem: the HTML code generated in 10g by the package is different by the HTML code generated in 9i. The package generating the html in 10g is identic, equal with the package generating html in 9i. We also receive a the following message error in 10g when loading the web page in 10g:
" 'Style' is null or undefined". It seems there is a problem with the Style object.
Anybody has seen something similar, because I am not very familiar with HTML and JSP.
Any help will be appreciated.
Thank you, Daniela.

Thank you for your reply.
Yes, it's done using MOD-PLSQL version 10.1.2.0.2.
I did as you said: compared the 2 generated HTML files. It's not that it doesn't generate all tags. It generates all tags but some of them are different, that is it screws them up.
Here it is some example code.
For example, in 9i I have the following code:
div id=div_plus_GENERALE style="cursor:hand; display:none;"
<td> width=8 </td>
<td id=butt align=left style="font-family:Verdana,Tahoma;
font-size: 10px; font-weight: 400; color: '#ffffff';
background-color: '';
"onClick="if (butt_clicked) butt_clicked.style.cssText=restore_butt_style;
butt_clicked=this; restore_butt_style=butt_off_lit;
this.style.cssText=butt_on_lit;
var x = document.getElementById('Freccia_' + freccia_old);
x.style.display = 'none';
Freccia_sitointer_anagrafica_anagrafica_cliente_punto.style.display='block';
freccia_old='sitointer_anagrafica_anagrafica_cliente_punto';"
onMouseOver="this.style.cssText=butt_on_lit;"
onMouseOut="if (butt_clicked != this) this.style.cssText=butt_off_lit;">Anagrafica Fornitura</td></tr>
<tr>
<td height=2></td>
</tr>
</table>
In 10g the HTML code looks like this:
div id=div_plus_GENERALE style="cursor:hand;"
<td width=8> </td>
<td align=left style="font-family:Verdana,Tahoma;
font-size: 10px; font-weight: 400; color: '#ffffff';
background-color: '';">
<a href="sitointer.anagrafica.anagrafica_cliente_punto target="frameCenter"
onClick="var x = document.getElementById('Freccia_' + freccia_old);
x.Style.visibility='hidden';
Freccia_sitointer_anagrafica_anagrafica_cliente_punto.Style.visibility='visible';
freccia_old='sitointer_anagrafica_anagrafica_cliente_punto';"
onMouseOver="this.style.cssText=butt_on_lit;"
onMouseOut="if (butt_clicked != this) this.style.cssText=butt_off_lit;">Anagrafica Fornitura</a></td></tr>
<tr>
<td height=2></td>
</tr>
</table>
At this point I don't know what should I investigate next.
Thank you very much.
Daniela

LocalLAT.txt file not working in Windows 7

hi,
i want to exclude few ip addresses from tmg client installed on a host and want it to be routed through another gateway placed on a router. I used to do this via locallat.txt file placed in all users directory with windows xp. but it is not working with
windows 7.
i have placed the file in: %ProgramData%\Microsoft\Firewall Client 2004
thanks

Hi,
As the issue is specific with Forefront TMG , you may contact Microsoft Forefront TMG Forum for further assistance on the issue:
Contact - Forefront TMG support:
https://social.technet.microsoft.com/Forums/forefront/en-us/home?category=forefront
Please revert for any clarification on this or any Windows issue. We will be glad to help you.
Roger Lu
TechNet Community Support

Generate to File not working

Similar Messages

Maybe you are looking for