Generating a list depending on the condition of checkboxes

I have a table with a list of items with a checkbox next to each of them. On a second table I'd like items from the first table to appear if they are checked off. Below is an screenshot of the result I'd like.
I apologize if this question has already been answered, I spent an hour looking and couldn't find an answer. I suspect it has something to do with VLOOKUP but I can't figure it out for the life of me.

noafe wrote:
I have a table with a list of items with a checkbox next to each of them. On a second table I'd like items from the first table to appear if they are checked off. Below is an screenshot of the result I'd like.
What you're looking for is a 'breakout table'.
See my post at the end of this discussion from last September.
A search of this forum for 'breakout' over the last year will bring up other examples.
Regards,
Barry

Similar Messages

  • Hiding text depending on the condition

    Hi All,
    I am new to reports, I want to know how can I hide and show text information depending on the condition....
    Thanks,
    Pavan.

    Then, u should kindly mention it pls to help others and state the version of reports u r using..!
    Regards,
    Abdetu..

  • Generating number depending on the condition

    Dear All,
    I have table with following structure.
    formno          number(5)
    name          Varchar2(100)
    centreno     number(2)
    rollno          Varchar2(10)
    I want to generate rollno depending on the following condition.
    1. Roll number should be generated based on the centreno
    2. Roll number should be generated based on the alphabets but not in a sqeuence.
    For eg.
    my data is like
    form no     name     centreno     rollno
    200           A1      01           1
    206           A2      01           4          
    502           A3      02           6
    234           A4      03           10
    400           B1      01           2               
    501           B2      02           7
    788           C1      01 3
    100           C2 02           8
    343           C3      01           5
    130           C4      02           9
    232           C5      03           11
    i.e. first I need to sort names alphabetically by centreno. But then I need generate number in a sequence that first A, B, C...Z will be generated. Then it starts again from A, B, C...Z for that centre. Then it will run same process for other centres.
    Any ideas how to do this?
    Regards
    Trusha
    Edited by: trusha on Oct 10, 2008 3:53 PM

    Something like .. (for given sample data)
    SQL> select * from test;
            C1 C2 C3
           200 A1 01
           206 A2 01
           502 A3 02
           234 A4 03
           400 B1 01
           501 B2 02
           788 C1 01
           100 C2 02
           343 C3 01
           130 C4 02
           232 C5 03
    11 rows selected.
    SQL> select c1,c2,c3,
      2    row_number() over(order by c3,rn,c2) regno
      3  from(
      4  select c1,c2,c3,
      5   row_number() over(partition by c3,substr(c2,1,1) order by c2) rn
      6  from test)
      7  order by c2;
            C1 C2 C3      REGNO
           200 A1 01          1
           206 A2 01          4
           502 A3 02          6
           234 A4 03         10
           400 B1 01          2
           501 B2 02          7
           788 C1 01          3
           100 C2 02          8
           343 C3 01          5
           130 C4 02          9
           232 C5 03         11
    11 rows selected.
    Edited by: jeneesh on Oct 10, 2008 4:51 PM
    corrected                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Calling multiple webservices depend on the condition

    Hi friends,
    i need a solution for my ccbpm flow.
    we are getting request from Webservice1 , and it is going to Webservice2. Here it will check the conditon in webservice2.
    if the conditon is true from there it will go to Webservice3.
    Unless Webservice2 will send a message to Webservice1.
    we are using CCBPM flow for this.
    for this i taught like if-else conditon.
    but i do't know how to use this condition.
    could any one provide solution for this.
    are if there is any other way to do this in CCBPM .
    note: i need it in CCBPM only.
    please help me on this.

    Firstly, you dont need ABAP proxy any more for a scenario which involves commmunication only between WS and BPM (i should say PI).
    in the above given flow can I take at first receiver mode u201CS/A Bridgeu201D because need to send response to the first webservice1.
    And could you tell if I used this S/A bridge , where can I close this S/A bridge.
    Sync-Async bridge should be used only if you want to send response to WS1 in any case i.e. response should always be sent to WS1 irrespective of any condition.
    The send step in which you are sending the response to WS1 will close the S/A bridge.
    From webservice3 the response need to go to webservice1.
    So can I take here the step like SyncSend(WS3Req_To_Ws1Res).
    When WS3Rep needs to be send to WS1 then you need not include it as a SYNCSend...it should be an ASYNCSend..... SYNCSend should be used only if WS1 is again going to send you some details back
    Question 3:
    How to replace ABAP Proxies in my Entire flow.
    Case1-->
    You need not worry about proxies anymore.....now you will be importing WSDL into External Definitions in Integration repository and using the same to build Message Mapping and Message Interface.
    You will get these wsdl files from the webservice applications with whom BPM (PI) will be talking.
    Case2 -->
    In your case firstly WS1 will send you a request....so now you need to provide them with the wsdl generated in PI....so that they can establish the communication.
    How to create the wsdl file?...check it here: /people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
    Just refer till Pt.2 of Testing section
    All the sender/ receiver protocol in your case will be SOAP.....i.e. only SOAP sender/ receiver channels needs to be created
    No channel is to be ccreated when BPM is the sender/ receiver
    Regards,
    Abhishek.

  • To hide a button in a column field depending on the condition in ALV

    Hai,
    I have a column in ALV with buttons.I need to make that button Visible or invisible based on a condition.
    i have fiels with value x and blank.
    if the value is x i need to make the button visible and viceversa.
    Cheers,
    Madhu.

    Hi,
    I assume when you say that you have a field with value X or blank that you have a internal table with one of the field as mentioned above and also a context node with
    the same structure of the internal table so that you bind the internal table to the node
    and display the same in ALV.
    If my assumptions are right you must proceed as follows.
    1.Create an internal table with the same structure that u had passed for ALV.Add one more column to that table with type wdui_visibility.
    2.Create one more node with the structure of the internal table created above.
    3.Move the coresssponding data from your old internal table to the new internal table.
    4.For the new column of type wdui_visibility fill values by comparing the field with value X or blank.ie. IF value = X wdui_visibility_column-value = '02' .
                        IF value = blank wdui_visibility_column-value = '01' .
    5.Save the changes in the new internal table.
    6.Bind the new internal table to the new node.
    7.Use the new node to display data in ALV.
    8.Create an attribute "alv_table" of type "CL_SALV_WD_CONFIG_TABLE" in the view.
    9.In the wd_init method add the following codes.
    * create an instance of ALV component
      DATA:
        lr_salv_wd_table_usage TYPE REF TO if_wd_component_usage.
    * get ALV component
      DATA:
        lr_salv_wd_table TYPE REF TO iwci_salv_wd_table.
    * set cell editor for input fields (~make colum Wt editable)
      DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
            lr_column type ref to CL_SALV_WD_COLUMN,
            lr_column_hdr type ref to CL_SALV_WD_COLUMN_HEADER,
            lr_button_1 TYPE REF TO cl_salv_wd_uie_button.
      lr_salv_wd_table_usage = wd_this->wd_cpuse_<Alv component usage name>( ).
      IF lr_salv_wd_table_usage->has_active_component( ) IS INITIAL.
        lr_salv_wd_table_usage->create_component( ).
      ENDIF.
      lr_salv_wd_table = wd_this->wd_cpifc_<Alv component usage name>( ).
      wd_this->alv_table = lr_salv_wd_table->get_model( ).
    lr_column_settings ?= wd_this->alv_table.
    lr_column = lr_column_settings->get_column( '<column name which you want to show
                      as button>' ).
    CREATE OBJECT lr_button_1.
      lr_button_1->set_text( '<some releavnt text>' ).
      lr_button_1->SET_VISIBLE_FIELDNAME('<new column name of type
                         wdui_visibility>').
      lr_column->set_cell_editor( lr_button_1). 
    Hope this helps.
    Thanks,
    G.Jayaprakash

  • How do I generate a list of all VIs that are in a TestStand (3.1) sequence?

    Can TestStand (3.1) generate a list of all the VIs that are included in the sequence?  I have a folder structure full of VIs and I know that not all are being used.  I'd like to identify the unused VIs.

    I hope there is no direct method to get the list of VI's, I will always try the following method
    This is the fairly easy way to get the list of VI's used in the Sequence
     Invoke ' Edit -> Sequence File Properties ' and in the  Load Option set  ' Preload When Opening Sequence File ' , after setting this property close and  open the corresponding Sequence file
    When the Sequence File is opened, all the VI's will be loaded in the Memory, so the below code in LabVIEW will list all the VI's in memory
    There is always other complicated Method, you have use the Teststand ActiveX to read all the Steps in the Sequence FIle and Get the Step names which has the LabVIEW Adapter.
    I am using TS 4.2.1, hope above mentioned options are in the TS 3.1
    AshwiN,

  • Dynamic select list dependency

    Hello,
    I want to have two select lists populated dynamically by a query, where contents of one list depend on the choice made in the other list.
    For example I have tables CATEGORY (ID, NAME) and SUBCATEGORY (ID, NAME, CAT_ID). I created one List of Values that Category select list is based on: "select name d, id r from category order by 1". This alone works fine.
    Now for Subcategory select list I created another List of Values: "select name d, id r from subcategory where cat_id = :CAT_ID order by 1". The where clause is just my guess and it doesn't work (select list is empty). How do I pass the value selected in my first select list as a parameter for the second one?
    Nikolai

    can you take a look to my response to the second question at...
    Pop List and Developer Toolbar
    ...and let us know if you have any questions?
    thanks,
    raj

  • In which table the condition records get stored in sap crm

    hi everybody any one can help me in this,
    In which table the condition records get stored in sap crm.
    Regards,
    Babu

    Hi Babu,
    The table name depends on the condition table you have chosen while adding a condition record. Like if it is SAP001, the database table will be CNCCRMPRSAP001.
    Regards,
    Shalini Chauhan
    Edited by: Shalini Chauhan on Jun 23, 2008 10:18 AM

  • Generate Page List Function

    Can anyone let me know where to launch the 'generate page list' function? I am developing a module based on strict coding from the client. The instructions tell me to delete code where they've marked it and then generate using the "Generate Page List" function. It is supposed to list the pages, in order, that make up the entire lesson.
    I attached an image of what the Generate Page List window looks like. Someone please help!!! Thanks in advance!

    I never got it. Which is why I was asking the forums how to access it. There were specific instructions given by our client and within these instructions they say to generate using the 'Generate Page List' function. The instructions are as follows:

  • Need to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.

    Hi All
    I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
    Suppose lets consider there are A,B,C,D,E,F,G,H columns.
    Now i want to create one form with the fields A,C,E.
    When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
    Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
    Please help me on this as it is very urgent from me..
    Thanks in Advance
    Sowjanya G

    Hi,
    According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
    I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
    In the workflow, you can add condition and actions as below:
    If current item: C equal to Test1
         Set E to Test2
    Then the value of the filed E will be changed based on the value of the filed C.
    In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to generate a pwm whose duty cycle has to be varied depending on the frequency of the input trigger??

    Sir/madam,
    I am quite new to the Labview FPGA module. 
    I am currently working on an application where i have to generate a pwm to control the ON time duration . The pwm ON time depends on the frequency of an input signal.I want to retrieve the ON time value from a lookup table which contain the duty cycle values for the pwm at different frequencies of the input.This input also has to work as a trigger. The input is pulsed and the trigger has to generate the pwm at every rising edge. I am using a PCI 7831R-  RIO series. I am urgently in need of some help and i have hardly a  couple of weeks before i meet the deadline.
    I am trying hard to learn the basics from the shipping examples but not able to quite make my vi work. 
    Kindly lend a helping hand and i would be very grateful to anybody who can help. Thanks a lot in advance.
    Do ask in case of any clarifications required. I  think i have explained my problem quite well. 

    Hello Manu,
    You can refer 
    Developing a PWM Interface using LabVIEW FPGA or PWM Output with LabVIEW FPGA
    How this helps.
    Best Regards, 
    Hardik Asawa
    AE
    National Instruments  
    Message Edited by Hardik Asawa on 05-05-2010 12:46 AM

  • Script needed to generate a list of paragraph and character styles from the Book Level

    Hello,
    I am using FrameMaker 11 in the Adobe Technical Communication Suite 4 and I need to find a script that will generate a list
    of paragraph and character styles from the book level.
    I am working with unstructured FrameMaker books, but will soon be looking at getting a conversion table developed
    that will allow me to migrate all my data over to Dita (1.1 for now).
    Any thoughts, ideas on this is very much appreciated.
    Regards,
    Jim

    Hi Jim,
    I think the problem you are having with getting a response is that you are asking someone to write a script for you. Normally, you would have to pay someone for this, as it is something that folks do for a living.
    Nonetheless, I had a few minutes to spare, so I worked up the following script that I believe does the job. It is very slow, clunky, and totally non-elegant, but I think it works. It leverages the book error log mechanism which is built in and accessible by scripts, but is spendidly unattractive. I hope this gives you a starting point. It could be made much more beautiful, of course, but such would take lots more time.
    Russ
    ListAllFormatsInBook()
    function ListAllFormatsInBook()
        var doc, path, fmt;
        var book = app.ActiveBook;
        if(!book.ObjectValid()) book = app.FirstOpenBook;
        if(!book.ObjectValid())
            alert("No book window is active. Cannot continue.");
            return;
        CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
        CallErrorLog(book, 0, 0, "** Book format report for:");
        CallErrorLog(book, 0, 0, book.Name);
        var comp = book.FirstComponentInBook;
        while(comp.ObjectValid())
            path = comp.Name;
            doc = SimpleOpen (path, false);
            if(doc.ObjectValid())
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, doc, 0, "");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "Paragraph formats:");
                fmt = doc.FirstPgfFmtInDoc;
                while(fmt.ObjectValid())
                    CallErrorLog(book, 0, 0, "  - " + fmt.Name);
                    fmt = fmt.NextPgfFmtInDoc;
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "Character formats:");
                fmt = doc.FirstCharFmtInDoc;
                while(fmt.ObjectValid())
                    CallErrorLog(book, 0, 0, "  - " + fmt.Name);
                    fmt = fmt.NextCharFmtInDoc;
            else
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "!!!  Could not open: " + comp.Name + " !!!");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            comp = comp.NextComponentInBook;
    function CallErrorLog(book, doc, object, text)
        var arg;
        arg = "log ";
        if(book == null || book == 0 || !book.ObjectValid())
            arg += "-b=0 ";
        else arg += "-b=" + book.id + " ";
        if(doc == null || doc == 0 || !doc.ObjectValid())
            arg += "-d=0 ";
        else arg += "-d=" + doc.id + " ";
        if(object == null || object == 0 || !object.ObjectValid())
            arg += "-O=0 ";
        else arg += "-O=" + object.id + " ";
        arg += "--" + text;
        CallClient("BookErrorLog", arg);

  • How to set condition in choose from list based on the combo selection

    Dear Members,
         i have a requirement to filter the item based on the itemgroup. After choosing the itemgroup in the dropdown list i have to filter the item for the particular group in the choose from the list.since i have tried in the combo select it doesnt work out for me.any body can suggest me is it doable. if so pls tell me the work around.
    My coding is as follows..
    Case SAPbouiCOM.BoEventTypes.et_COMBO_SELECT
    if pval.itemUID="Cmb"
                                objChooseCollection = objForm.ChooseFromLists
                                objChooseFromList = objChooseCollection.Item("CFL1")
                                objConditions = objChooseFromList.GetConditions()
                                objcondition = objConditions.Add()
                                objcondition.Alias = "itmsgrpcod"
                                objcondition.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                                objcondition.CondVal = Form.items.item("Cmb").specific.selected.value
                                objChooseFromList.SetConditions(objConditions)
    End if
    With Regards,
    jai.
    Edited by: JaiShankarRaman on Dec 23, 2009 10:47 AM

    Hello,
    Following is a code sample which I am using:
            Dim oForm As SAPbouiCOM.Form
            Dim oMatrix As SAPbouiCOM.Matrix
            Dim oChooseFromList As SAPbouiCOM.ChooseFromList
            Dim oConditions As SAPbouiCOM.Conditions
            Dim oCondition As SAPbouiCOM.Condition
            Dim CodeType As Integer
            Try
                oForm = oPayOn.SBO_Application.Forms.GetForm(CflEvent.FormTypeEx, CflEvent.FormTypeCount)
                oMatrix = oForm.Items.Item("AC_MATRIX").Specific
                oChooseFromList = oForm.ChooseFromLists.Item("ACC_CFL1")
                CodeType = oMatrix.Columns.Item("AC_MC00").Cells.Item(CflEvent.Row).Specific.Selected.Value
                oConditions = oChooseFromList.GetConditions
                If oConditions.Count > 0 Then
                    oCondition = oConditions.Item(0)
                Else
                    oCondition = oConditions.Add
                End If
                oCondition.Alias = "U_CodeType"
                oCondition.Operation = SAPbouiCOM.BoConditionOperation.co_EQUAL
                oCondition.CondVal = CodeType
                oChooseFromList.SetConditions(oConditions)
            Catch ex As Exception
                'oPayOn.SBO_Application.SetStatusBarMessage(ex.Message, SAPbouiCOM.BoMessageTime.bmt_Medium, True)
            End Try
        End Sub
    I am calling this in the CFL event - before action. So when the user clicks on CFL button - but before it opens - this code is called and the condition is applied. Here AC_MC00 is a combo column in a matrix.
    Regards
    Rahul Jain

  • How to set colors in cells depending the conditions  in alvtree

    Hi All,
    Could you please provide me idea or sample program how to set colors in cells depending the conditions  in alvtree.
    Thanks,
    Suresh

    When running vim in a terminal, it will use whatever colour scheme is defined by the terminal.  You should have a look at this thread:
    http://bbs.archlinux.org/viewtopic.php?id=51818
    Also, check the wiki article on Xdefaults.

  • Conditions in SQVI for amount depending upon the Debitcredit Indicator

    Hello ABAP's
    I am new to this forum & learning. I am using SQVI for getting Information from Table BSEG. The data is getting extracted but I am unable to give any conditions for amount depending upon the Debitcredit Indicator. If it is "H" ie. Credit the Amount should change colour and if it is "S" it should be as it is.Just like in tcode MB51 when we get negative amount the Line is dispalyed in Pink and in case of Positive in Green.
    Looking forward to your help.
    With regards
    Sandy

    Hi Sandesh,
    You can not manipulate data in SQVI. For that you can write a query in infostructures transaction SQ01/02/03.
    1. Go in SQ02, create an infoset and assign it to user-group available.
    2. Inside infoset, declare table BSEG and click on button 'Extras'. here, you can write your code to multply by '-1' to a field depending upon some condition. Select 'Code' tab and code section as 'Record Processing'. Write code in window displayed.
    3. In SQ01, select infoset you just created and select the query.
    Execute the same and you will get required output.
    Let me know if it helps.
    Gouri.

Maybe you are looking for