Generating Report with vertical lines from Designer

Hi:
I would like to get any suggestions about generating tabular reports with vertical lines from Oracle Designer 6.0 on Windows NT.
Any help will be appreciated.
Thanks in advance

Hey c2petrov,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you are having trouble with the screen. A frustrating situation to be sure. This article addresses issues with video on internal or external displays.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Have a nice day,
Mario

Similar Messages

Code generate report in excel format from portal(Application Server)

Hi all
Please give some solution with code generate report in excel format from
oracle portal(Application Server).

Not feasible.
Why? Because "the Excel format" is a binary and proprietary Microsoft file format. And writing a generator to generate Excel files will be complex, and resource expensive. In the vast majority of cases this will not be justified.
As an alternative the very basic Microsoft XML office format can be used. But note that this is not a a ISO standard (it has been shot down in flames) - and effort and resources for that would be better spend on the Open Document XML standard (which very likely will be ratified as the ISO standard instead).
Of course, you could have meant a CSV file - in which case, you need to play close attention to details. CSV is not an Excel format. A software designers and developers, our success is determined by attention to technical detail. In which case you are not paying any attention to technical detail by confusing CSV with Excel.

How to generate report with dynamic variable number of columns?

How to generate report with dynamic variable number of columns?
I need to generate a report with varying column names (state names) as follows:
SELECT AK, AL, AR,... FROM States ;
I get these column names from the result of another query.
In order to clarify my question, Please consider following table:
CREATE TABLE TIME_PERIODS (
PERIOD     VARCHAR2 (50) PRIMARY KEY
CREATE TABLE STATE_INCOME (
     NAME     VARCHAR2 (2),
     PERIOD     VARCHAR2 (50)     REFERENCES TIME_PERIODS (PERIOD) ,
     INCOME     NUMBER (12, 2)
I like to generate a report as follows:
AK CA DE FL ...
PERIOD1 1222.23 2423.20 232.33 345.21
PERIOD2
PERIOD3
Total 433242.23 56744.34 8872.21 2324.23 ...
The TIME_PERIODS.Period and State.Name could change dynamically.
So I can't specify the state name in Select query like
SELECT AK, AL, AR,... FROM
What is the best way to generate this report?

SQL> -- test tables and test data:
SQL> CREATE TABLE states
2    (state VARCHAR2 (2))
3 /
Table created.
SQL> INSERT INTO states
2 VALUES ('AK')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AL')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('AR')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('CA')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('DE')
3 /
1 row created.
SQL> INSERT INTO states
2 VALUES ('FL')
3 /
1 row created.
SQL> CREATE TABLE TIME_PERIODS
2    (PERIOD VARCHAR2 (50) PRIMARY KEY)
3 /
Table created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD1')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD2')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD3')
3 /
1 row created.
SQL> INSERT INTO time_periods
2 VALUES ('PERIOD4')
3 /
1 row created.
SQL> CREATE TABLE STATE_INCOME
2    (NAME   VARCHAR2 (2),
3      PERIOD VARCHAR2 (50) REFERENCES TIME_PERIODS (PERIOD),
4      INCOME NUMBER (12, 2))
5 /
Table created.
SQL> INSERT INTO state_income
2 VALUES ('AK', 'PERIOD1', 1222.23)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('CA', 'PERIOD1', 2423.20)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('DE', 'PERIOD1', 232.33)
3 /
1 row created.
SQL> INSERT INTO state_income
2 VALUES ('FL', 'PERIOD1', 345.21)
3 /
1 row created.
SQL> -- the basic query:
SQL> SELECT   SUBSTR (time_periods.period, 1, 10) period,
2            SUM (DECODE (name, 'AK', income)) "AK",
3            SUM (DECODE (name, 'CA', income)) "CA",
4            SUM (DECODE (name, 'DE', income)) "DE",
5            SUM (DECODE (name, 'FL', income)) "FL"
6 FROM     state_income, time_periods
7 WHERE    time_periods.period = state_income.period (+)
8 AND      time_periods.period IN ('PERIOD1','PERIOD2','PERIOD3')
9 GROUP BY ROLLUP (time_periods.period)
10 /
PERIOD             AK         CA         DE         FL
PERIOD1       1222.23     2423.2     232.33     345.21
PERIOD2
PERIOD3
              1222.23     2423.2     232.33     345.21
SQL> -- package that dynamically executes the query
SQL> -- given variable numbers and values
SQL> -- of states and periods:
SQL> CREATE OR REPLACE PACKAGE package_name
2 AS
3    TYPE cursor_type IS REF CURSOR;
4    PROCEDURE procedure_name
5       (p_periods   IN     VARCHAR2,
6        p_states    IN     VARCHAR2,
7        cursor_name IN OUT cursor_type);
8 END package_name;
9 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY package_name
2 AS
3    PROCEDURE procedure_name
4       (p_periods   IN     VARCHAR2,
5        p_states    IN     VARCHAR2,
6        cursor_name IN OUT cursor_type)
7    IS
8       v_periods          VARCHAR2 (1000);
9       v_sql               VARCHAR2 (4000);
10       v_states          VARCHAR2 (1000) := p_states;
11    BEGIN
12       v_periods := REPLACE (p_periods, ',', ''',''');
13       v_sql := 'SELECT SUBSTR(time_periods.period,1,10) period';
14       WHILE LENGTH (v_states) > 1
15       LOOP
16         v_sql := v_sql
17         || ',SUM(DECODE(name,'''
18         || SUBSTR (v_states,1,2) || ''',income)) "' || SUBSTR (v_states,1,2)
19         || '"';
20         v_states := LTRIM (SUBSTR (v_states, 3), ',');
21       END LOOP;
22       v_sql := v_sql
23       || 'FROM     state_income, time_periods
24           WHERE    time_periods.period = state_income.period (+)
25           AND      time_periods.period IN (''' || v_periods || ''')
26           GROUP BY ROLLUP (time_periods.period)';
27       OPEN cursor_name FOR v_sql;
28    END procedure_name;
29 END package_name;
30 /
Package body created.
SQL> -- sample executions from SQL:
SQL> VARIABLE g_ref REFCURSOR
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2,PERIOD3','AK,CA,DE,FL', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         CA         DE         FL
PERIOD1       1222.23     2423.2     232.33     345.21
PERIOD2
PERIOD3
              1222.23     2423.2     232.33     345.21
SQL> EXEC package_name.procedure_name ('PERIOD1,PERIOD2','AK,AL,AR', :g_ref)
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         AL         AR
PERIOD1       1222.23
PERIOD2
              1222.23
SQL> -- sample execution from PL/SQL block
SQL> -- using parameters derived from processing
SQL> -- cursors containing results of other queries:
SQL> DECLARE
2    CURSOR c_period
3    IS
4    SELECT period
5    FROM   time_periods;
6    v_periods   VARCHAR2 (1000);
7    v_delimiter VARCHAR2 (1) := NULL;
8    CURSOR c_states
9    IS
10    SELECT state
11    FROM   states;
12    v_states    VARCHAR2 (1000);
13 BEGIN
14    FOR r_period IN c_period
15    LOOP
16       v_periods := v_periods || v_delimiter || r_period.period;
17       v_delimiter := ',';
18    END LOOP;
19    v_delimiter := NULL;
20    FOR r_states IN c_states
21    LOOP
22       v_states := v_states || v_delimiter || r_states.state;
23       v_delimiter := ',';
24    END LOOP;
25    package_name.procedure_name (v_periods, v_states, :g_ref);
26 END;
27 /
PL/SQL procedure successfully completed.
SQL> PRINT g_ref
PERIOD             AK         AL         AR         CA         DE         FL
PERIOD1       1222.23                           2423.2     232.33     345.21
PERIOD2
PERIOD3
PERIOD4
              1222.23                           2423.2     232.33     345.21

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
How can i fix this problem ?
En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
Comment corriger le problème ? Merci à l'avance.
Réjeanne Blouin

Hello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

Deadlock with thread issues while generating reports with Crystal Report XI

We are facing deadlock with thread issues while generating report with Crystal Report XI
Version Number is 11.0 and the database used is Oracle
In the log file on line number 74350 by 2008/12/16 13:35:54 there is a dead lock with Thread: u20184u2019 is waiting to acquire lock for 'com.crystaldecisions.reports.queryengine.av@15214b9' which is held by the Thread: '0'.
And a dead lock with Thread: u20180u2019 is waiting to acquire lock for 'com.crystaldecisions.reports.queryengine.av@15214b9' which is held by the Thread: '4'.
Exactly after 10 minutes we can see the thread 4 and 0 are declared as STUCK by 2008/12/16 13:45:54 .
Is this an existing issue with Crystal Report?
Is there some solution for this problem?
THE LOG FILE INFORMATION IS GIVEN BELOW
[deadlocked thread] [ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)':
Thread '[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'' is waiting to acquire lock 'com.crystaldecisions.reports.queryengine.av@15214b9' that is held by thread '[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)''
Stack trace:
     com.crystaldecisions.reports.queryengine.av.V(Unknown Source)
     com.crystaldecisions.reports.queryengine.av.do(Unknown Source)
     com.crystaldecisions.reports.queryengine.as.if(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.datainterface.j.c(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source)
     com.crystaldecisions.reports.common.ab.a(Unknown Source)
     com.crystaldecisions.reports.common.ab.if(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
     com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source)
     com.crystaldecisions.reports.reportengineinterface.a.a.b.a(Unknown Source)
     com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
     com.sysarris.aris.crystalreports.RepServlet.generateReport(RepServlet.java:65)
     com.sysarris.aris.crystalreports.RepServlet.doPost(RepServlet.java:40)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
[deadlocked thread] [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)':
Thread '[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'' is waiting to acquire lock 'com.crystaldecisions.reports.queryengine.av@12e0415' that is held by thread '[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)''
Stack trace:
     com.crystaldecisions.reports.queryengine.av.V(Unknown Source)
     com.crystaldecisions.reports.queryengine.av.do(Unknown Source)
     com.crystaldecisions.reports.queryengine.as.if(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.datainterface.j.c(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source)
     com.crystaldecisions.reports.common.ab.a(Unknown Source)
     com.crystaldecisions.reports.common.ab.if(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source)
     com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source)
     com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source)
     com.crystaldecisions.reports.reportengineinterface.a.a.b.a(Unknown Source)
     com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source)
     com.sysarris.aris.crystalreports.RepServlet.generateReport(RepServlet.java:65)
     com.sysarris.aris.crystalreports.RepServlet.doPost(RepServlet.java:40)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:272)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:165)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3153)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1973)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1880)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1310)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
Can you please suggest any work around for this?

I'm not referring to Servlet threading issues.
I'll clarify.
You have two threads, both entering ReportClientDocument.open(...) method.
Thread 4 is waiting to acquire 'com.crystaldecisions.reports.queryengine.av@15214b9'
Thread 0 is waiting to acquire ''com.crystaldecisions.reports.queryengine.av@12e0415'
So I'm thinking ??? are they the same objects?
My specific question concerning the ReportClientDocument is that both are calling open - i.e., trying to open a new report. You wouldn't be trying to open different reports using the same ReportClientDocument - so was wondering if you've cached the RCD and trying to open two different reports at the same time on the same instance via different threads.
You'd normally tie a ReportClientDocument instance to a HTTP Session, to ensure each user gets their own copy.
Sincerely,
Ted Ueda

Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Thanks for any help!

You have to take the computer to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

How to make report with access 2010 from SharePoint Discussion lists 2013

HI,
I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
but instead it is shown as a separate entry in the database.
Anyone can please help?
SAN
Santhiya
Santhiya

Hi Santhiya,
I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
Thanks,
Wendy
Wendy Li
TechNet Community Support

My macbook pro keeps freezing with vertical lines on the screen

I have a 2010 macbook pro that has worked wonderfully until now. As of late it keeps freezing with vertical lines across the screen. To me this indicates a hardware problem, but I ran a diagnostic (restarted while holding D) and it didn't find any errors. It seems that it happens when I move or bump my macbook, leading me to think it may possibly be a disk problem, but I'm not sure how to check this. Anybody else ever have this problem or could suggest a fix for it?

You can try a pram reset, which might help with the display, but the bumoing thing is what concerns me.
PRAM reset:
Power down, power back up and hold the following keys before the start up chime.
option, command, P, R,(no commas) continue to hold these keys till you hear the start up chime 2 times then release.
Reboot see if this helps, the bumping part scares me.
Hope this helps

My brand new 2.9GHz quad-core Intel Core i5 frozen to blank screen with Vertical lines. Why! any ideas before I send back to store. Thanks

My brand new 2.9GHz quad-core Intel Core i5 JUST straight out of the box worked for 20 minutes, long enough to sort Apple ID etc, then froze to a blank screen with Vertical lines. Why! any ideas before I send back to store. Thanks
ps: mavericks not installed on it yet, didn't even have chance to do anything with it!

None. Take it back ASAP.

I-Mac crash with vertical lines down the screen

My i-Mac is about 4 years old, running OS-X version 10.8.2.
About 2 weeks ago my system suddenly crashed and the whole screen was filled with vertical lines - alternate blue and white.
Yesterday the same thing happened, except that the vertical lines were alternate red and white.
Both times I turned the desktop off, left it for a minute or two, and then turned it back on again. The system then booted up normally and I was able to access all my applications as normal.
To date my i-Mac has been very reliable but I am a bit worried that this 'crash' problem has now occurred twice. I have kept the operating system up-to-date and am running OS-X 10.8.2.
Could anyone please tell me why this problem is occuring and how I can fix it?
Thanks in anticipation.

Thanks for your help.
I have a 24" i-Mac (bought new in 2009), do your comments still apply?'
What do you think could have caused the card to develop this fault? (Currently only internmittent, but it presumably will get worse)?
I will back up my files and go and see my local Apple Store as you suggested, but do you have any idea how much replacing the graphics card on my 24" machine would cost??

Cannot go past purple screen with vertical lines was opening for a while releasing power button whirl holding down Alt Cmd will no longer respond

iMac Intel mid 2010 not part of later graphics card free fix stuck on purple screen with vertical lines disconnecting power cord then trying to restart holding down Alt Ctl used to open to normal screen. Now will not display always
I5
OsX Mavericks

Unable to see the screen at all. Only have light purple with vertical ines completly across screen. Priot to that it also was green with vertical lines
It is a 2.8 GHZ Intel Graphics Card is ATI HD 5750 Radeon 1024 MB

Generate report with data from database package

Hi
Is it possible to generate a report where the values come from an oracle database package instead of from an sql query declared in the report itself?
If yes, how is it done?
Appreciate any help. Thx.

Hi,
You can use REF CURSORs to generate reports from a database package.
For information about REF CURSORs, please see Chapter 40 'Building a Paper Report with REF CURSORs' of the Oracle Reports Building Reports manual.
This chapter is at:
http://download-uk.oracle.com/docs/html/B13895_01/orbr_refcur.htm#i1011693
Hope this helps.
Regards,
Panna

A big problem of Generate report with PDF format....Urgent

I want to generate a report with pdf format through one java file, it have two page 1)gen_report.jsp 2) report_gen.java , the compliation was failed. However, i don't what the problem is .... i hope anyone can help me as it is very argent for me ....Thanks a lot
1)gen_report.jsp
<table id="AutoNumber1">
   <tr>
     <td background="images/top5movie.png">
     <p align="center"> </p>
    </td>
   </tr>
   <tr>
   <td >
      <div align="center">
        <table id="AutoNumber2" >
              <form method="GET" action="../report_gen" name="report_gen" target="_blank" onSubmit="javascript:return checkr1(this)">
                <tr>
                  <td ><b>Report Description:</b></td>
                  <td >This report is to show the top five popular movies in cinemix for a period </td>
                </tr>
                <tr>
                  <td><b>Data scope:</b></td>
                  <td >Start from
                  <input type="text" name="start" value="2003-1-1" >to
                  <input type="text" name="end" value="2006-1-1" ></td>
                 </tr>
                 <tr>
                  <td><b>Data processing:</b></td>
                  <td >Show
                    <select name="order_by">
                      <option value="desc" selected>top</option>
                      <option value="asc">bottom</option>
                    </select>
                  5 films</td>
                </tr>
                <tr>
                  <td> <p align="center">
                      <input type="submit" value="View_Report" name="subm">
                    </p></td>
                </tr>
                <input type="hidden" name="report" value="r1">
              </form>
              <form method="GET" action="../report_gen" name="report_gen" target="_blank" onSubmit="javascript:return checkr2(this)">
                <input type="hidden" name="report" value="r2">
              </form>
            </table>
     </div>
      </td>
    </tr>
</table>Then my java code is here
report_gen.java
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
import java.sql.*;
// chart and pdf out
import java.awt.Graphics2D;
import java.awt.geom.Rectangle2D;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import org.jfree.chart.ChartFactory;
import org.jfree.chart.JFreeChart;
import org.jfree.chart.plot.PlotOrientation;
import org.jfree.data.category.DefaultCategoryDataset;
import org.jfree.data.xy.*;
import org.jfree.data.xy.XYBarDataset;
import org.jfree.data.general.DefaultPieDataset;
import org.jfree.data.statistics.SimpleHistogramDataset;
import org.jfree.data.xy.XYSeries;
import org.jfree.data.xy.XYSeriesCollection;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.Rectangle;
import com.lowagie.text.pdf.DefaultFontMapper;
import com.lowagie.text.pdf.PdfContentByte;
import com.lowagie.text.pdf.PdfTemplate;
import com.lowagie.text.pdf.PdfWriter;
import com.lowagie.text.*;
import com.lowagie.text.pdf.*;
import com.lowagie.text.pdf.PdfPCell;
public class report_gen extends HttpServlet
   private final String titles[] = {"Top Five popular movies ",
                    "Financial cirumstance of cinemas",
                    "Distribution of time segment",
                    "Distribution of favourite movie type"
   private final String descs[] = {"This report is to show the top five popular movies in cinemix for a period ",
               "This report is to show the financial circumstance of each cinema site ",
               "This report is to analysis the customer when is the most visit time ",
               "This report is to analysis the customer which type of movie do they watch the most"
    private final String bigTitle = "Cinemix";
    private final String driver = "org.gjt.mm.mysql.Driver";
    private final String url= "jdbc:mysql://localhost:3306/cinemix";
    private final String userID = "abc";
    private final String passwd = "abc";
    public void init(ServletConfig config) throws ServletException
      super.init(config);
   protected void doGet(HttpServletRequest request, HttpServletResponse response)
   throws ServletException, IOException
      final int width = 550;
     final int height = 200;
/ title font (centre and report title)
     final Font fTitle0 = FontFactory.getFont("Helvetica", 42, Font.BOLD);
     final Font fTitle1 = FontFactory.getFont("Helvetica", 30, Font.BOLD);
          // centre name:
    final String title0 = bigTitle;
   // Default category for DefaultCategoryDataset
   final String cat = "data";
   Connection conn;
JFreeChart chart;
   String title1     = "xyz Report";
   String chartDesc = "description";
   String notes[] = new String[4];
   String chartTitle = "so bad this is title";
   String chartXTitle = "this is x";
   String chartYTitle = "this is y.";
   String report = request.getParameter("report");
   int max=-10000;
   int min=10000;
   int j=0;
// do some basic checking
   if (report == null || report.equals(""))
     report = "-1"; // this course unknow report error message
     String start   = request.getParameter("start");
     String end = request.getParameter("end");
     String order_by = request.getParameter("order_by"); // ToDo: check invalid string
       int topN = 5;
    String order = (order_by.equals("desc")) ? "Top" : "Last";
   String inv[] = {"08:30", "09:30", "10:30", "11:30", "12:30", "11:30", "12:30", "13:30", "14:30", "15:30", "16:30", "17:30","18:30","19:30","20:30","21:30","22:30","23:30"};
     int inv_val[] = new int[inv.length - 1];
     try
        Class.forName(driver).newInstance();
         catch(Exception e)
        printE("Cannot load mysql database driver!", response);
          e.printStackTrace();
           return;
       try
             conn = DriverManager.getConnection(url, userID, passwd);
              if (report.equals("r1")) { // report 1
           DefaultCategoryDataset dataset = new DefaultCategoryDataset();
          Statement stmt = conn.createStatement();
          String sql = "select *,count(f.Name),f.Name from film f, filmDetail fd, ticket t where f.startDate > '" + start + "' and f.endDate < '" + end + "'and fd.filmID = f.filmID and fd.filmDetailID = t.filmDetailID group by f.name order by fd.filmDetailID asc limit '" +topN+"'";
          ResultSet rs = stmt.executeQuery(sql);
        while (rs.next())
       if (rs.getInt("fd.filmDetailID") > max) max = rs.getInt("fd.filmDetailID");
     if (rs.getInt("fd.filmDetailID") < min) min = rs.getInt("fd.filmDetailID");
      j++;
       ataset.setValue(rs.getInt("fd.filmDetailID"), cat,rs.getString("f.Name"));
       title1     = titles[0];
     chartDesc = descs[0];
     chartTitle = order + " " + topN + " popular movie";
      chartYTitle = "Box Office record";
      chartXTitle = "Film Name";
      gender = " ";
      chart = ChartFactory.createBarChart(chartTitle, chartXTitle,   chartYTitle, dataset,PlotOrientation.VERTICAL, false, true, false);
    else
          print("Error: I don't inderstand your request!", response);
     return;
       catch (SQLException e)
     printE("Cannot open database connection? <br>", response);
     // printE(e.toString);
e.printStackTrace();
return;
     response.setContentType("application/pdf");
     Document document = new Document(PageSize.A4, 5, 5, 5, 5);
    try
         PdfWriter writer;
     writer = PdfWriter.getInstance(document, response.getOutputStream());
    HeaderFooter footer = new HeaderFooter(new Phrase("Page: "), true);
     footer.setBorder(Rectangle.NO_BORDER);
document.setFooter(footer);
               footer.setAlignment(Element.ALIGN_CENTER);
               // step 3
               document.open();
               document.add(getHeader(title0, title1, start, end, gender, order, topN, chartDesc));
               document.add(printChart(chart, writer));
               document.add(getFooter(notes));
          catch(DocumentException de)
               de.printStackTrace();
          // step 5
          document.close();
          return;
     }// end doGet()
     /** Handles the HTTP <code>POST</code> method.
      * @param request servlet request
      * @param response servlet response
     protected void doPost(HttpServletRequest request, HttpServletResponse response)
          throws ServletException, IOException
          // processRequest(request, response);
     /** Returns a short description of the servlet.
     public String getServletInfo()
          return "Generate reports for " + bigTitle;
     /* To print en error and exit(?) */
     private void printE(Object obj, HttpServletResponse response) throws IOException
          response.setContentType("text/html");
          PrintWriter out;
          out = response.getWriter();
          out.print(obj.toString());
          out.close();
          // To-Do: how to force exiting?
     // create data chart
     private PdfPTable getHeader(String title0, String title1, String start, String end, String sex, String order, int topN, String desc)
          Font fTitle0 = FontFactory.getFont("Helvetica", 42, Font.BOLD);
          Font fTitle1 = FontFactory.getFont("Helvetica", 24, Font.BOLD);
          Font fTitle3 = FontFactory.getFont("Helvetica", 12, Font.BOLD);
          Font fValue = FontFactory.getFont("Helvetica", 12, Font.UNDERLINE);
          Paragraph parStartEnd = new Paragraph();
          parStartEnd.add(new Phrase("Data start from:                  ", fTitle3));
          parStartEnd.add(new Phrase(start, fValue));
          parStartEnd.add(new Phrase("     to     ", fTitle3));
          parStartEnd.add(new Phrase(end, fValue));
          Paragraph parGenerateDate = new Paragraph();
          parGenerateDate.add(new Phrase("Report generated at:         ", fTitle3));
          parGenerateDate.add(new Phrase(new java.util.Date().toString(), fValue));
          Paragraph parGender = new Paragraph();
          parGender.add(new Phrase("Current show gender:       ", fTitle3));
          parGender.add(new Phrase(sex, fValue));
          Paragraph parTopN = new Paragraph();
          parTopN.add(new Phrase("Now is showing                 ", fTitle3));
          parTopN.add(new Phrase(order, fValue));
          parTopN.add(new Phrase(" ", fValue));
          parTopN.add(new Phrase(new Integer(topN).toString(), fValue));
          parTopN.add(new Phrase("   record(s)", fTitle3));
          // Start main table
          PdfPTable tblMain = new PdfPTable(1);
          tblMain.getDefaultCell().setBorder(0);
          // Print title
          tblMain.getDefaultCell().setHorizontalAlignment(Element.ALIGN_CENTER);
          tblMain.addCell(new Paragraph(title0, fTitle0));
          tblMain.addCell(new Paragraph(title1, fTitle1));
          tblMain.addCell("");
          tblMain.addCell("");
          tblMain.addCell("");
          // Print headers data
          //tblMain.getDefaultCell().setHorizontalAlignment(Element.ALIGN_RIGHT);
          //tblMain.addCell(parInvoiceNum);
          //tblMain.addCell("");
          tblMain.getDefaultCell().setHorizontalAlignment(Element.ALIGN_LEFT);
          tblMain.addCell(parStartEnd);
          tblMain.addCell("");
          tblMain.addCell(parGenerateDate);
          tblMain.addCell("");
          if (sex != " ")
               tblMain.addCell(parGender);
          else if(order != null && topN > 0)
               tblMain.addCell(parTopN);
          else
               tblMain.addCell(" \n");
          tblMain.addCell("");
          tblMain.setWidthPercentage(96);
          tblMain.addCell(new Paragraph("Description of this report:", fTitle3));
          tblMain.addCell(desc);
          tblMain.addCell("\n");
          // Finish main table
          return tblMain;
     // print a chart _directly_ to pdf and return a empty Pdftable...
     public PdfPTable printChart(JFreeChart chart, PdfWriter writer)
          PdfContentByte cb = writer.getDirectContent();
          int width = 550;
          int height = 450;
          PdfTemplate tp = cb.createTemplate(width, height);
          Graphics2D g2d = tp.createGraphics(width, height, new DefaultFontMapper());
          Rectangle2D r2d = new Rectangle2D.Double(0, 0, width, height); //->,
          chart.draw(g2d, r2d);
          g2d.dispose();
          cb.addTemplate(tp, 20, 170);
          // quick method to push down the footer text
          // the only things this method return
          PdfPTable tblDownDown = new PdfPTable(1);
          tblDownDown.getDefaultCell().setBorder(0);
          tblDownDown.addCell(" \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n");
          tblDownDown.addCell(" \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n");
          tblDownDown.addCell(" \n \n \n \n \n \n");
          return tblDownDown;
     public PdfPTable getFooter(String notes[])
          Font fNote = FontFactory.getFont("Helvetica", 14, Font.UNDERLINE);
          Font fComment = FontFactory.getFont("Helvetica", 12, Font.ITALIC);
          Font fTitle1 = FontFactory.getFont("Helvetica", 30, Font.ITALIC);
          // Start footer table
          PdfPTable tblFooter = new PdfPTable(1);
          tblFooter.getDefaultCell().setBorder(0);
          if (notes != null)
               tblFooter.addCell(new Paragraph("Notes:", fNote));
               tblFooter.addCell("");
               tblFooter.addCell("");
               tblFooter.getDefaultCell().setHorizontalAlignment(Element.ALIGN_LEFT);
               for (int i=0;i<notes.length;i++)
                    if (notes[i] != null)
                         tblFooter.addCell(new Paragraph("" + (i+1) + ". " + notes[i] + "", fComment));
                         tblFooter.addCell("");
                         tblFooter.addCell("");
                    tblFooter.getDefaultCell().setHorizontalAlignment(Element.ALIGN_CENTER);
                    tblFooter.addCell(new Paragraph("- End of report -", fComment));
                    return tblFooter;
}

Go to the cache directory and see if you can open the report directly from here (not in IE).
I have seen posts on problems with Acrobat Reader Plugin for IE (I believe it was version 6 of Reader).

Generate Report with BI Publisher can't completed

Hi all,
I am new in oracle.
Can anyone help me to solve this problem when I want to generate report by using XML publisher.
I have made my template for my report in Microsoft Word and I am using BIPublisherDesktop to generate my report.
Actually I want to make a conditional formatting and I always prompted with this error :
Caused by: oracle.xdo.parser.v2.XSLException: <Line 100, Column 86>: XML-22047: (Error) Invalid instantiation of 'Attribute' in 'Element' context.
Can anyone help me to solve this problem. I have read on this forum and I got not solution with it. Thanks a lot.

It all depends on your XML file structure. Can you help us with a sample XML file. You can also mail me [email protected]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered.

Calling report with parameter screen from form using frmrwinteg

Hi,
I am calling a report with a parameter screen from a form and am using the frmrwinteg bean. This works fine on our test application server but, when moved onto our production application server, the database logon screen is presented after pressing the submit button on the parameter screen. The cause of the problem seems to be the html generated to simulate the parameter screen. The html on the test application server contains a BASE tag in the HEAD section with an href starting "http:/servername.companyname.com". However, the same tag in the html generated on the production application server is missing the ".companyname.com", causing the cookie produced by the frmrwinteg bean to not be found. Does anyone know how the BASE href tag is generated and what I need to change to get the correct BASE href value? I am using Forms/Reports 10g R2 and Application Server 10.1.2.
Cheers.....

Appendix "A" of this document describes how cookie_domain works:
http://otn.oracle.com/products/forms/pdf/10g/frmwebshowdoc_rep.pdf

Generating Report with vertical lines from Designer

Similar Messages

Maybe you are looking for