Generation of a lsb file to use a CIN in LabVIEW 7.0
Hello,
I am working with LabVIEW 7.0 under Windows XP to create a VI that uses a CIN in the block diagramm. Following the steps in the manual "Using External Code in LabVIEW" (2003, pages 3-15 and 3-16), I created a project in Visual C++.net, but there are problems during the build process. The error message is: "error PRJ0019: A tool returned an error code from "Performing Custom Build Step". Although myproject.dll is generated, no lsb file does.
I created the enviromental variable CINTOOLSDIR and also replaced in the project settings $(WkspDir) by a path.
What is wrong? Is there a different possibility to generate the lsb file?
Thank you for your help.
The solution is described in http://forums.ni.com/ni/board/message?board.id=170&message.id=120422
The enviromental variable CINTOOLSDIR shouldn't be used. Instead, copy the cintools directory to c:\ and replace CINTOOLSDIR in the project settings by c:\cintools
Thanks
Similar Messages
-
Cannot load .lsb file of CIN
I can create the .lsb file of a simple CIN in CVI 7.0 by following the steps in cintools\cvilvsb.h. I get
messages ' creating a DLL with no exports' and 'No import libraries will be created'. I can create the .lsb file, but it never loads to the VI, the VI does not get executable. What am I missing ?Hello,
I have found some informations on the NI website.
General Informations.
External Code for LabVIEW - CIN / DLL - Starting Point
http://digital.ni.com/public.nsf/websearch/A6705FEC7EA42300862567B70054206E?OpenDocument
Why Do I Get A Link Error When I Try To Build My LSB File to Use With My CIN in LabVIEW?
http://digital.ni.com/public.nsf/websearch/46F50E3302115E4786256D7300787BEC?OpenDocument
Tutorial: How to create a lsb file.
http://zone.ni.com/devzone/conceptd.nsf/webmain/31DAB548C369B2C6862567C8006D8FC9?opendocument
Hope this helps,
best regards.
Sebastian Nowoisky -
Saving a Text data to a PDF file without using print option
Hi,
I want to save a Text to a PDF file. I want to assign the path of the PDF file as a default one.
If I use Print options, then it ask for the file path at the run time.
Is there any method to save to a PDF file without using print option in Labview 8.2.
Regards,
RajaThis question comes up a lot. Did you try searching? It depends on the PDF printer driver that you're using. See here, here, here, ...
-
How do I share an iMovie file for use on 1st or 2nd generation Apple TV
How do I share an finished imovie file for use on 1st or 2nd generation apple TV?
I shared my finished movie in I Tunes but it doesnt show up on my Gen 1 apple tv or my gen 2 Apple TV. The sharing process indicates that the movie is compatable with gen 3 Apple TV.
Carl -
Problem in reloading the .lsb file
Hi All,
We are using a CIN function to interface an external C code and created the LSB file with required parameters. This was integrated to our LabVIEW code succesfully.
Later during the progress of the code development, we've created an additional output parameter in this CIN function. Accordingly we've modified the C code and updated the .lsb file.
We could not reload the latest /lsb file into this CIN funtion because the three options (Relaod code resource, Reload code resource From... and Purge Bad Code Resource) are appearing disabled when we right click on the CIN function.
Could you pls suggest me where exactly we are going wrong? Will there be any problem in creating additional parameters for the exisiting CIN?
Thanks in advance.
-Krishna.Krishna,
It seems like your question is related to the problem mentioned in the following forum:
http://forums.ni.com/ni/board/message?board.id=170&message.id=242840&requireLogin=False
At this point I would recommend you to reload all of your CINs by performing a Mass Compile. This KnowledgeBase has more information on how to reload your CINs automatically.
I hope this helps!
Mehak D. -
How to create .lsb files in the LabVIEW6?
my IDE is VC6.0, how can i create a .lsb files?
lyq;
lsb files are the one that LabVIEW uses in a CIN. The specific step that creates the lsb file is a custom step which involve calling a program called "lvsbutil.exe", which must be in your cintools directory where LabVIEW is located. You can configure VC++ to do that extra step.
Check the manual Using External Code in LabVIEW. Chapter 3 explain all the steps to create your own lsb.
Best regards;
Enrique
www.vartortech.com -
i have a problem in creating lsb file using MSVC++ version 6.my labview version is 6i.
pls let me know where i can find the resources.
xxxxHere are a couple of resources that you might find useful:
How Do I Generate CIN Code in Microsoft Visual C++ 6?
How to build a CIN code resource (.lsb file)
- Elton -
I want to create a shortcut (Win7) that will automatically open the last file I used in the above apps when I open the app. Is there a command line switch like /r or /l that does that?
Thanks, your point is well taken... It would be nice, though, to have the ability to sort a "Last Used" column in iTunes and select a bunch of apps to remove in one shot.
-
I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothing inside. Then I tried to save email as a PDF file by using Safari browser. And I got a complete and sucessful PDF file. I usually save web pages or web mail, online receipt as PDF file by use Firefox. But since I have updated to the new version, there were many problems with my Firefox. I tried to restore all my application and made Firefox in the old 3.6.3 version which I used to have no problem. But now still not working.
I solved it for myself: it was my HP smart-web printer crap that was a plug in and add on for firefox that somehow automatically got installed when I upgraded to 5. I disabled both in the add-ons manager, and voila, printing is working.
It seems there are many things, like this and the Google toolbar, that were screwed by the oddly fast update to 5. Looks like Mozilla didn't give anybody any notice! Must've been some really bad security hole. -
I'm using Mac OS X 10.6.4. Today, I tried to save my email content as a PDF file. However, I only got a PDF file that have partial content of email. Then I adjust the printer setting and did it again, then I only got a blank PDF file. There was nothing inside. Then I tried to save email as a PDF file by using Safari browser. And I got a complete and sucessful PDF file. I usually save web pages or web mail, online receipt as PDF file by use Firefox. But since I have updated to the new version, there were many problems with my Firefox. I tried to restore all my application and made Firefox in the old 3.6.3 version which I used to have no problem. But now still not working.
''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746583 here]''hello jlzibell, please go through the troubleshooting steps described at [[Websites say cookies are blocked - Unblock them]].
-
Help needed while exporting crystal reports to HTML file format using java
Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanksthe ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM -
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated
Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail -
Cannot delete file - tried everything - file in use by Windows Explorer error
Hi - I have tried now for 2-3 hours trying to delete an .mkv file from my "Downloads" folder
It says the file is in use by Windows Explorer and cannot be deleted
I have tried deleting it using Del command prompt as me and as Administrator (I am the Admnistrator, there are no other users) - no luck
I have tried Safe Boot and then deleting - no luck
I have tried rebooting many times and then deleting - no luck
Any ideas? It's driving me nutshi to all who have this bug- "file in use by Windows Explorer error"
this is the only way that it works:
1.type cmd in search box
2.go to the drive and the directory the file is in ,for example:
after you type cmd you have a black screen with c:\user\
type in the drive the file is in and hit enter example - d: than hit enter
than you should see d:\>
now click the directory the problem file is in ,for example i will call the directory "movies" type in this- cd movies
now you will see this d:\movies>
to delete the file type this: del filename.mkv (dont forget the .mkv or any other file extension) don't hit enter yet, first open task manager (cntrl+shift+esc) go to process tab than right click on explorer.exe choose and click on end process
now your desktop should disappear. get back to the "cmd" window and hit enter.
now the file is deleted. now go back to the task manager and click on "file" on the upper left corner then on new task then type in "explorer.exe"
and you are done
please note that the file name you choose to delete cant be with spaces between the letters .if so you will need to change it in the same way in the cmd window only the comand will be instead of "del filename.mkv"(for example) after you are in the
right drive and directory:
rename "test space.mkv" testspace.mkv
hope i helped
this is the only way it workes
Instead of running a CMD prompt and typing everything, just start up Winrar or Winzip, kill Explorer, then delete problem MKV files to your hearts content within Winrar or Winzip.
Winrar and Winzip will navigate your folders as well.
After you are done, create a new Explorer task.
or..... if you need to rename MKV files, just rename them within Winrar/Winzip with Explorer not running.
I change the MKV extension to AVI (in Winrar with Explorer killed) in order to avoid Explorer issues, if I ever want to move the files in the future without needing to kill Explorer all the time to do so .
Using WinRAR works for me. Using the cmd function becomes complicated when I cannot rename my file with the rename command". -
Delete files from computer - not allowed, file in use
Using firefox to upload files online, being this a simple pdf document or a video file, prevents me from deleting the file from my hard drive, once the process is completed. Once I quit the web browser, deleting the file is possible. It looks like firefox is keeping the link to a file in constant use even after the website at which the file was used is no longer opened. Am I missing some something in firefox's properties settings?
I've called the big guys to help you. Good luck.
Maybe you are looking for
-
HT201322 Is it possible to buy a TV box set on iTunes but only download one season at a time
I cannot afford to use up all the space it would take to download four seasons of a tv box set. Is there a way I can purchase the box set but only store locally one season at a time?
-
TS2755 I am not able to send pictures to one of my contacts. I can for all others.
I am not able to send pictures to one of my contacts. I can for all others. Can someone explain why that could be happening?
-
Files and Desktop Shortcut gone??
I seem to have lost all of the forms I created in the Adobe FormsCentral File and the desktop shortcut is missing. Any ideas what could have happened? Additionally, all of the forms I created and saved at *.pdfs using FormsCentral created forms are m
-
Preferred Sharpening Settings For Printing
What sharpening settings do you folks normally use for printing to matte, luster and gloss papers from Aperture? Lightroom has an algorithmic output sharpening feature that takes the image size, output resolution and media type (probably more things,
-
UFT 12.01 Connectivity with Oracle issue
We want to use UFT for parameterized automated testing, while using an Oracle database as data source. UFT is supposed to support two types of database connectivity methods: Microsoft Query Manual SQL Queries When we attempted the Microsoft Query opt