Generation of detail buttons with wizard style
Hi,
A master (table style layout)-detail normally creates parent-to-child buttons. Unfortunately, these buttons are also generated on our wizard page that is based on a master with two details.
So we changed the pageComponent/formGroup.vm template and added :
an extra if-statement : #if (!($group.wizardStyle)) within the <af:tableSelectOne to prevent the generation of the buttons but keep the selection.
Suggestion for the next release ;-).
Ciao
Aino
AIno,
Makes sense, I guess we didn't really anticipate a table layout in a wizard style layout.
Steven Davelaar,
JHeadstart Team.
Similar Messages
-
Layout Style "tree-form" with Wizard Style Layout checked
Dear all,
I am using layout style "tree-form" with Wizard Style Layout check box checked. intention is to display the hierarchy in tree and insertion with the help of Wizard for the last block. But with above settings, generated form is displaying as blank.
Example of required behavior: REGIONS should be displayed in Tree while the new Employees entry should be with the help of Wizard Style Layout.
Thanks in advance for help.
Muhammad ShafiqueMuhammed,
This combination is not supported. But you can acvhieve what you want by creating a separate group to insert a new employee. This additional group should have form layout, wizard checkbox checked, and "Add Menu Entry" option unchecked.
Then you can customize the New button in the existing tree-form employee group to navigate to the new employee wizard group.
Steven Davelaar,
JHeadstart Team. -
Problem with wizard Style layout.
Hi Dear Jheadstart team,
I am using jdeveloper 10.1.3.1 and jhs 10.1.3.0.95,
I have developed a data entry page using wizard style in separate pages witch have 5 pages, I have followed all steps which is shown in demo screenshot #4, surprisingly enough, the generated page shows 10 steps instead of 5 in witch the name of pages are duplicated(p1,p1,p2,p2,p3,p3 , …). When I run the application, it’s done in 5 steps with step numbers 2, 4, 6,8,10.
What I have done wrong? Is there any setting to avoid this situation?
Thank you in advance.
Alireza.Alireza,
There is an issue with the 10.1.3.0 evaluation version which causes pages to appear twice in the process train bar. This happens when the page has an LOV, "depends on item", or file upload items.
The work around is to remove the duplicate entires in the generated WizardProcessModel bean definition after generation, or to create a custom template for this bean def.
This has been fixed in the 10.1.3.1 production version.
Steven Davelaar,
JHeadstart Team. -
Need detailed procedure on how to add an item with Item Style Check Box in
Need detailed procedure on how to add an item with Item Style Check Box in Framework.
The view instance should be the same as the view instance (view object) specified for your region.
If the View Attribute already that you need already exists in the View Object then you can use it.
Otherwise you have to extend the View Object and add the new attribute to it.
--Prasanna -
Hi there i just am in the process of ordering creative cloud and i went to press the confirm button with all my details in and then a message came up saying ' Payment System Unavailable' Just wondering what i do?
I am encountering the same problem and I can not find the answers.I don't know what to do anymore.I am in Japan and i tried to call the numbers provided and it is in japanese.I can't understand..I hope someone here would help us.
-
Wizard Style layout and flex items
Dear JHeadstart team,
We have several pages where the "Wizard Style Layout" is checked and where a flex item region is defined.
However, the generator generates the flex item region correctly, but the page definition misses the flexitems methodAction and invokeAction.
Standard pages work correctly with the flex item regions.
Current fix:
1. Switch off "Clear page definition before generation"
2. Manually add entries in the page definition.
Am I correct?
Remco Moolenaar
ConnexysHi Remco,
We also use wizard-style layout with flex item regions successfully. In our JHeadstart application definition, we have defined one Item Region in the Regions region container for each page. Within each Item Region,
we have included one item with display type = flexRegion.
For each Item Region, one page is generated and all methodAction and invokeAction tags are included in the page definition file.
Could you please provide more details on your application definition structure?
Regards,
Ibrahim -
Hi,
I am using JHeadstart v10.1.3. I am experimenting with setting the 'Overall Layout Style' property to 'Wizard Style'. I cannot get this to generate Back/Next buttons. It seems to generate the same screens as if I had selected 'Menu Style'.
Are there some other related properties that I must set?
Thanks,
GavinHi Gavin,
According to JHeadstart release note:
The following functionality is not yet implemented in this 10.1.3 Preview Release.
Wizard-style layout
Breadcrumbs
Role-based Authorization
Eron Yang -
"Details" button How to eliminate it ?
Hi !
I generated a simple project for JHeadStart (Default Web application) and I have a few tables with only one column ... with "Details" button ..
Is there a way to eliminate it somehow from JSP ?
Thank youIf you change the layout style of the group from table-form to table, the details button and form page will not be generated.
Steven Davelaar,
JHeadstart Team. -
I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...
Hi Leo22,
Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
Jeremy L.
National Instruments
Jeremy L.
National Instruments -
How to make table control rows dynamic/unlimited using TC with Wizard
Hi Friends ,
I have designed a table control layout using table control with wizard.
Now the problem is when we design a TC layout ,then we have to design it on the page . The page has upper & lower limits. so the maximum size & maximum rows in layout is limited. I have tried to create a TC layout with maximum size & maximum rows . Maximum rows created in Layout is 25.
Now suppose if enduser wants 100 entries to enter by coping a file of 100 records in my TC present on entry screen , then ONLY 25 entries are displayed on entry scren before doing any user action or saving and after saving only these 25 entries are sved in DB. Means enrtries from 26 to 100 are not displayed on entry screen or saved in DB.
So my requirement is to display all 100 entries at a time in entry screen before saving with scrolling up & down facility and these 100 entries should also get saved in DB after clicking save button. In short I want dynamic entry screen table control which can show/dieplay Any Number . of entries whatever the number may be entered by enduser .
Plz note that I have used all 3 facilliteis i.e.
1. Scrolling
2. INSERT/DELETE
3. SELECT/DESELECT
while designing TC with wizard .
Scrolling buttons like FIRST PAGE, PREV. PAGE, NEXT PAGE, LAST PAGE are displayed.
BUT they are not functioning though there is system generated code present in both MPP and in PBO & PAI. After clicking any of them , data which is dislaying on entry screen ( Here it is 25 entries ) is getting cleared/disappeared from enry entry screen.
Waiting for ur response & solutions.
Thanks & Regards,
SudhirHi Ashish ,
Do one thing .
At PAI of screen holding TC , there is module name tc_mark on request .
in this module , there is work area declared g_tc_wa .
Now go to tc_init module of pbo , where u have given your select command .
select * from ........................................
use this code .
if g_tc_wa is initial .
SELECT * FROm
g_tc_wa = 'X'.
REFRESH CONTROL 'TC' FROM SCREEN dynnr.
ENDIF.
Just do this , m sure all buttons, insert, delete , scroll bar.. everything will work . -
View not copied or enhanced with wizard Error while creating Event Handler method in Z Component
Hello Friends,
In one Z Component (Custom Component), in one of the views, while creating event handler, it gave me error message that view not copied or enhanced with wizard.
I am aware that in Standard Component, if we want to create the event handler method then we need to first Enhance the Component and then we need to enhance the view.
But, in the Z Component (Custom Component), how to create event handler method in one of the views as while creating event handler method i am getting view not copied or enhanced with wizard error.Hi,
Add a method in views impl class with naming convention eh_on__* with htmt and html_ex parameters. I dont have have the system right now. Please check any existing event import export parameters.
Check out do handle event method in the same class.
Redefine that method. Call that event method in this handle method. See existing code for reference.
Attach that event to the button on click event in .htm page.
Regards,
Bhushan -
Animating a button with actionScript
I'm fairly stumped on this one - but probably quite simple to fix.
I need to animate the scale of a button with actionScript 2.0. I've inherited a project that was done with actionScript 2.0 and have decided to stay with this generation rather than rewrite the whole project. Anyway - I've created a sound object, it plays audio from the library and 3 seconds after it starts playing, I want to animate the "next" button and make it pulse to attract the users attention.
Doing this by putting the button in a movie clip is not working as I am losing it's button states and besides it's probably far more tighter to program it.
When the user rolls over the button it stops pulsing but still retains it's up, over and down states.
Any easy answer?Thanks for your help Ned.
I ended up making an advanced button with movie clips and using programming for all the states.
Movies are so much easier to control than buttons.
But you have raised something I had overlooked...setTimeout( )
I was using setInterval( ) and then doing clearInterval( ) within the function so it would only loop once, which of course was problematic if the user beat the 'clearInterval' code by clicking on the button too early.
Actually used setInterval( ) to delay all sound on the project - now going to re-program all that.
Thanks -
When I trying to found bluetooth audio devices with ZEN Style M300,? the player get to freeze after a little bit time that is searching devices, and so I have to push the reset button for using again the player. :mansurprised:Anyone have the same problem?
I have a similar problem. It recognized and paired with a Sony Ericsson MW600 Hi-Fi Bluetooth Stereo Headset once. I lost connection, could no longer connect, and tried to re-pair it. Now it recognizes the the headset's name (MW600), but when you try to pair with it stays on a "Please wait..." message. It will stay that way forever until I press the back (left) arrow. Then the message says "Remote Device not responding" and pairing fails. This MW600 headset pairs with other devices (cell phone, PC) just fine, though, so it's not malfunctioning.
I suspect this might be a Bluetooth version compatibility issue? I say that because when I connect to a Jawbone Era (pretty new device, probably latest Bluetooth spec), everything goes fine.
Also, if I clear all devices, then try to pair to just the Sony Ericsson MW600, I can get the M300 in a state where it hangs and will not respond to anything. I then have to press the reset button using a paperclip to start over. -
Master Detail Forms with 2 composite primary keys - Is there a workaround?
Hello All,
I have been searching for a workaround to the maximum 2 part primary key restriction on the multi-row updates, and master-detail forms, and am hoping that someone can help me. I am using HTMLDB v2.0.0.00.49 with IE 6 against a 9.2 DB.
I successfully implemented the workaround of Fred Stoopendaal's (see Updata PK on HTML DB ) and it works fine for single page multi-record updateable forms, but alas I haven't been able to extend it to master detail forms (I think it is something to do with Oracle not allowing the "returning" clause on views).
Here is what I tried:
two tables, one with a 2 part composite primary key, which is the master table, and a detail table with 3 part composite primary key -
--------- BEGIN SQL ---------
create table master_table
( master_col1 number
, master_col2 number
, master_col3 varchar2(30)
, constraint master_pk primary key (master_col1,master_col2));
create table detail_table
(detail_col1 number
,detail_col2 number
,detail_col3 number
,detail_col4 varchar2(30)
, constraint detail_pk primary key(detail_col1,detail_col2,detail_col3)
, constraint master_detail_fk foreign key (detail_col1,detail_col2) references master_table(master_col1,master_col2));
create or replace view v_master_table as
select rowid mata_rowid,mata.*
from master_table mata;
create or replace view v_detail_table as
select rowid deta_rowid,
(select rowid from master_table mata where mata.master_col1 = deta.detail_col1 and mata.master_col2 = deta.detail_col2) deta_mata_rowid
, deta.*
from detail_table deta;
create or replace trigger mata_ins_upd_trg
instead of insert or update on v_master_table
referencing new as new old as old
for each row
begin
if inserting then
insert into master_table (master_col1, master_col2, master_col3)
values (:new.master_col1, :new.master_col2, :new.master_col3);
end if;
if updating then
update master_table
set master_col1 = :new.master_col1,
master_col2 = :new.master_col2,
master_col3 = :new.master_col3
where rowid = :old.mata_rowid;
end if;
end;
create or replace trigger deta_ins_upd_trg
instead of insert or update on v_detail_table
referencing new as new old as old
for each row
begin
if inserting then
insert into detail_table ( detail_col1, detail_col2, detail_col3, detail_col4)
values (:new.detail_col1, :new.detail_col2, :new.detail_col3, :new.detail_col4);
end if;
if updating then
update detail_table
set detail_col1 = :new.detail_col1,
detail_col2 = :new.detail_col2,
detail_col3 = :new.detail_col3,
detail_col4 = :new.detail_col4
where rowid = :old.deta_rowid;
end if;
end;
--------- END SQL ---------
Then I created a master-detail form in Apex on the two views, using the mata_rowid and deta_rowid as primary keys, and mata_rowid=deta_mata_rowid as the link. I realise that using a function to fetch the master rowid within the detail view query is costly, but it was my intention to modify the record fetch queries to use the real FK columns once things were up and running.
It seems to generate the pages ok, and I can insert/update master table records, but as soon as I modify records in the detail table things go a bit haywire. I can't find any documentation on how the inbuilt MRU/MRD logic works, so can't figure out the issue.
Can anyone out there tell me what the problem is with the logic above, or if they have come up with a neat solution to this annoying limitation. I know that many will say that I should modify the data model to use surrogate primary keys, but many of the uses for HTMLDB are new interfaces for old schemas, so a workaround that doesn't involve wholesale data model changes would be preferable.
Thanks in advance,
Mike CretanHi, this is likely not the most elegant way...but perhaps the simplest -- and I didn't have much time to play.
I used Wizard to create two separate Master Detail forms, each with a separate detail table. Thus I ended up with four pages:
Page "A" - "Selector" page for Master (Report), with Edit link driving to Detail-1
Page "B" - Editable Master/Detail-1 page (HTML / Report)
Page "C" - "Selector" page for Master (Report), with Edit link driving to Detail-2
Page "D" - Editable Master/Detail-2 page (HTML / Report)
Then I selected the primary key column TWICE on the Report on Page A. Modified the second instance of this column to navigate to Page D (passing primary key) exactly the way the original instance of this column navigates to Page B. Then I deleted Page C.
Since you can have only one Tabular Entry form per page, this seemed the best way to drive two separate detail tables from a common interface. -
I have created some circular navigation buttons with alpha,
and I am wondering if I can get the alpha to be honoured in two situations.
1) When I click on the button only the circle part gets highlighted.
2) If I overlay these buttons over a graphic, the alpha gets honoured as well.
I am using a png but I can not find a function in acrobat that accepts the
alpha channel.
ThanksSure, Thanks for your help Zaxist!
Boiling it down to the most simple, this is the prob.
Layer: Symbol with gallery images (images are turned off inside the symbol.. so they should not block anything)
Layer: Symbol (button A)
With this layout... Button A doesn't work at all. The button is not detected when mouse is clicked.
But...
If i delete the top layer... Button A works.
If I turn off the top layer from the stage. (top/left display option)... Button A works.
Using an image, I wish it could be ignored by any mouse/touch events, so it doesn't block any layers beneath it.
I've been playing with somehow turning off the display on the gallery symbol from another button. So far i've started to dig into css and found
<style>
span
display:none;
</style>
but i dont know how to put that into a button's events like mouseclick or mousedown from another symbol.
Does that explain things better?
Maybe you are looking for
-
My App Store account is different from my cloud account, how do i sync ibooks?
We have a family itunes account for purchasing music and apps, but 3 separate cloud accounts for each of our devices. I books seems to be synced through the family account. Is there a way to sync it with individual clouds so that some of the saved
-
I have deleted all my videos songs and photos from my iphone 4 but when i connect to itunes it still shows 17gb free. how can I solve this issue without restore. Total storage of my iphone is 32 gb.
-
Blank error message with ? appears and PDF does not open in Browser (IE11) when clicking link to open pdf. PC - IE11 Acrobat 9.0 Cannot access in browser PDF files unless blank box is closed and then website address is clicked on again in browser add
-
Best approach for layered drag and drop functionality
So here's the thing. I'm working on making a program with tabbed documents. Each tab has a JTextArea subclass in it. Already each textArea has built-in functionality for accepting plain text in DnD. You drag some text over/within the textArea, and it
-
Cant Uninstall UE-V 2.1 if Settings Storage Path not set
I'm currently testing UE-V and am configuring it so that Settings Storage gets stored in users home directory, rather than dumped in a single share. I have to add "SettingsStoragePathReg=TRUE " into the installation command in order for the install t