Generic Data source on VBFA Table
Dear Experts,
I would liike beuild a generic data source on VBFA table. Here i want to have all the fields of the Table.
Now my questions are.
1.I want to a Delta Update to BW, on want fields I should choose Delta to get all the changed records as well as the newly created records.
2. Do I need to build the Data source using a Function module.
3.Along with this I have a requirement to get the Sales Org, Company Code, Maetrial group information. How can I achieve this ( from which all tables I can get this information).
4. What is the frequncy of the table VBFA update.
5. generally what would be the number of Records for a Delta Update to BW.
Your suggestions are appreciated.
Regards,
Ganesh Thota.
Moderator message: a topic for the BI forums, but please invest own research effort before asking there.
Edited by: Thomas Zloch on Jul 15, 2010 12:56 PM
Hi,
you need to create fm for the extraction as you have 2 delta relevant fields erdat and aedat to get the new and the changed records.
Siggi
Similar Messages
-
Dear all experts,
i am extracting generic data source
while doing it, it is saying as the table which i have selected in the screen SE11 has not activated
can anybody please tell solution...
its very urgent.
points will be assigned to your help.....
regards
vinayDear Kalpana M ,
can you please tell, how to activate tables..
i m using makt and mara.... and i have created view on them.
how to activate these tables.
plz reply, its very urgent.
regards
Vinay -
Delta field not enabled for selection in generic data source
Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
ShilpaHi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo. -
Hi
Can anyone suggest me detailed navigation on creating generic data source using some tables pleaseDear
pls, use TCode RSO2
Check for details:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
also check this:
https://forums.sdn.sap.com/click.jspa?searchID=10169908&messageID=3258271
Thanks -
Hi
when i want to create a Generic data source for T001S table by using the Extraction from View.
when i saved it is thorowing Error Pool or Cluster Table is not allowed.
Please let me know how i can create data source for Pool or cluster table.
question 2 how i can create data source from Extraction from Query.
how i can create Infoset Query.
Regards
Atul
Moderator message: BI related, please ask in the appropriate forum.
Edited by: Thomas Zloch on Oct 27, 2010 6:12 PMHi,
first go to ROOSFIELD and
NEter your datasource name in oltpsource and check your field BPRME. what is its status in Selection.
You have to make it 'X'.
For that,You need to create an ABAP program in se38 and execute the attached code.
update roosfield
set selection = 'X'
where oltpsource = V_PROD_TRADE
and field = BPRME
and selection = 'A'
and objvers = 'A'.
Hope i m clr.
Regards,
San! -
Error generic data source for table VBAK in SAP R/3 7.01
Hi
When I was trying to create generate data source(RSO2) from table VBAK. The system replies that
Invalid extract structure template VBAK of Data Source ZSD_SALES
You tried to generate an extract structure with the template structure VBAK. This operation failed, because the template structure quantity fields or currency fields, for example, field ZZLFAMT refer to a different table.
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
Regards
Anand ReddyHi,
use 2lis_11_vahdr instead.
But in addition, you need to create a view on vbak and the reference table/s of the keyfigure units, add the unit fields as well as all fields of vbak to the view and use the view for the generic datasource instead of the table.
Siggi
Edited by: Siegfried Szameitat on Oct 5, 2010 2:46 PM -
Regarding: Loading data from R/3 To BI for a Generic Data source
Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
R_BUDAT FOR BSIS-BUDAT,
R_GJAHR FOR BSIS-GJAHR,
R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
S_COUNTER_DATAPAKID LIKE SY-TABIX,
S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
RBURS TYPE FAGLFLEXA-RBUKRS,
RYEAR TYPE FAGLFLEXA-RYEAR,
DOCNR TYPE FAGLFLEXA-DOCNR,
BUZEI TYPE FAGLFLEXA-BUZEI,
DOCLN TYPE FAGLFLEXA-DOCLN,
PRCTR TYPE FAGLFLEXA-PRCTR,
SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
CASE I_DSOURCE.
WHEN 'ZFI_GL_M4'.
WHEN OTHERS.
IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
LOG_WRITE 'E' "message type
'R3' "message class
'009' "message number
I_DSOURCE "message variable 1
' '. "message variable 2
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call OPEN CURSOR + FETCH
Following Calls FETCH only
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
APPEND R_BUKRS.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
APPEND R_GJAHR.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
APPEND R_BUDAT.
ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG) 10502001
*GRIR Services & Others Payable 10502002
R_HKONT-SIGN = 'I'. "i_t_select-sign.
R_HKONT-OPTION = 'BT'." i_t_select-option.
R_HKONT-LOW = '0010502001'.
R_HKONT-HIGH = '0010502002'. "i_t_select-high.
APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT BUKRS
AUGBL
ZUONR
BELNR
GJAHR
BUZEI
BUDAT
HKONT
BLART
MONAT
BSCHL
SHKZG
DMBTR
WAERS
FROM BSIS
INTO TABLE E_T_DATA
WHERE BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BUDAT IN R_BUDAT
AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA1
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
SELECT BUKRS
AUGBL
ZUONR
BELNR
GJAHR
BUZEI
BUDAT
HKONT
BLART
MONAT
BSCHL
SHKZG
DMBTR
WAERS
FROM BSAS
into table E_T_DATA
WHERE BUKRS IN R_BUKRS
AND GJAHR IN R_GJAHR
AND BUDAT IN R_BUDAT
AND HKONT IN R_HKONT.
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS
OF TABLE E_T_DATA
PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF. "First data package ?
DATA: F_YEAR TYPE BKPF-GJAHR.
DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
SELECT RBUKRS
RYEAR
DOCNR
BUZEI
DOCLN
PRCTR
SEGMENT
FROM FAGLFLEXA
INTO TABLE GT_FAGL
FOR ALL ENTRIES IN E_T_DATA
WHERE RYEAR = E_T_DATA-GJAHR
AND DOCNR = E_T_DATA-BELNR
AND RLDNR = '0L'
AND RBUKRS = E_T_DATA-BUKRS
AND BUZEI = E_T_DATA-BUZEI.
WHERE RYEAR = E_T_DATA-GJAHR
AND DOCNR = E_T_DATA-BELNR
AND RBUKRS = E_T_DATA-BUKRS.
AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
IF E_T_DATA-SHKZG = 'H'.
E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
ENDIF.
CLEAR: F_YEAR.
CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
EXPORTING
COMPANYCODEID = E_T_DATA-BUKRS
POSTING_DATE = E_T_DATA-BUDAT
IMPORTING
FISCAL_YEAR = F_YEAR
FISCAL_PERIOD = F_PERI.
DATA: V_DOC(6) TYPE C .
CLEAR: V_DOC.
V_DOC = E_T_DATA-BUZEI.
IF V_DOC IS NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = V_DOC
IMPORTING
OUTPUT = V_DOC.
ENDIF.
aS PROFIT center is not updated in all the lines in Bsis
READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
DOCNR = E_T_DATA-BELNR
RBURS = E_T_DATA-BUKRS
BUZEI = E_T_DATA-BUZEI.
IF SY-SUBRC = 0.
E_T_DATA-PRCTR = GS_FAGL-PRCTR.
E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
CONCATENATE F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
CLEAR: E_T_DATA.
ENDLOOP.
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks, -
Error While Creating The Generic Data Source.
Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santoshn Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM -
Error while creating Generic data source using FM
Hi Experts,
I try to create a generic data source using the Function Module via the transaction RSO2. I got the following error messages.
" Das Einheitenfeld CURR des Feldes ZPKZA1 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA2 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
" Das Einheitenfeld CURR des Feldes ZPKZA10 der DataSource ZBWN_DS_POLPOSP ist ausgeblendet"
"The unit field CURR of the field ZPKZA1 of the DATA SOURCE ZBWN_DS_POLPOSP is not visible/ stopped/ hide".
for all 10 fields of type CURR.
How shall i handle this issue..........any suggestions please........
thanks in advance
cheers
sailekhaHi,
Are your CURR fields refereded to a currency field of your structure?? Maybe the problem is that the field containing the currency is refered to other table/structure and it has to be one of your structure fields.
Hope this helps,
Regards,
Carlos. -
Error while doing DELTA Extraction (generic data source)
Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gauravI dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working. -
Error while testing Generic Data Source extraction
I've created generic data source for Texts and Attributes in R/3 based on VIEW (Z table)
I get error "Error 6 in function module RSS_PROGRAM_GENERATE" while trying to test the data sources through RSO2
I guess there can be a lot of reasons... Please name me anybody who knows them...
thanx in advanceHi,
Please Check the OSS note 328948 and it provides solution to same error what you have. Additionally you can have a look into this OSS note 705212 too.
Syntax error in the generated extraction program Symptom
You notice the error by one of the following symptoms:
The loading of transaction data from an R/3 system terminates with a syntax error in the generated extraction program. The monitor displays the error messages:
R3027 "Error & during the generation of the data transfer program"
RSM340 "Error in the source system"
The extraction within the extractor checker terminates with error message RJ028 "Error 6 in function module RSS_PROGRAM_GENERATE".The activation of transfer rules ends in BW with error message RG102 "Syntax error in GP$ERR$, row... (-> long text)" from the source system. Usually, the diagnosis in the long text of the error message is: "...could not be interpreted. Possible error causes: Incorrect notation or... "
Other terms
OLTP, extractor, data extraction, DataSource, Service API, SAPI,
R3 027, R3 27, RSM 340, RJ 028, RJ 28
Reason and Prerequisites
The error only occurs in the source system, if this contains Basis Release 3.1I and Service API (SAPI) 3.0C Support Package 6. SAPI 3.0C Support Package 6 is contained, for example, in PI 2003.1 Support Package 7 (see attached composite SAP note 673002).
Solution
To correct the problem you need service API 3.0C Support Package 7 in the affected source system. The attached composite SAP note 704971 explains in which software components service API 3.0C is contained, and what the corresponding Support Packages of these components are.
Alternatively, you can also copy the advance correction from the appendix.
Hope it helps.
Regards -
Generic Data Source issue in CRM.
Hi Guru's,
Generic Data Source with Table gave an issue "invalid Extracture structure template XXXXX of Data source XXXXX"
Generic Data source with Function Module gave an issue "Units field VOLUM_U for field VOLUME of DataSource ZTEST_XYZ is hidden"
Generic Data Source with View configured successfully but the data is not coming in Extractor Checker.
Three tables has taken in to consideration. I think there might be some issue with Join condition.
Can any one through light on this incident. Your help will be appreciated.
Thanks in Advance.
Venkat.Hi Praveen,
yes you are right. I took reference field as VOLUM_U.
I have created Generic Table. Do you need me to take same table in the reference Table.
Thanks
Venkat. -
BW Master data delta generic data source for further update in BW
Hi BWers,
I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
Regards,
MadhavIn your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method... -
Generic Data Source is calling multiple times in RSA3
[color:red}<Moderator Message: This topic has alread been discussed a lot of times. Additionally there are weblogs related to it. Please search the forums and/or the blogs for this issue>
Hi experts,
I have the requirement to get data from Generic Data Sources with function Module,
after finishing the FM I have checked in extact checker(RSA)
in the internal table I_T_DATA is displays 281 records,
but in RSA3 it shows 112560 records, I found that the FM is calling multiple time by executing one time in RSA3.
1.what would be the problem
2.where is the porblem is it in FM coding or any other places to check.
<removed by moderator>
Regards
Vijay
Edited by: Siegfried Szameitat on Feb 3, 2009 11:45 AMHi Savita,
I don't understand clearly from your reply regarding flow you transported and what all you transported.
You need to first transport objects in R/3 and import them.
Then transport Infoprovider, Datasource in BI assuming depenedent Infoare Infoobject, application component already transported.
Then transport your Infosource, Update rule, Transfer rules, Infopackage.
Hope you understood.
Ravi -
Extraction, Flat File, Generic Data Source, Delta Initialization
Extraction, Flat File, Generic Data Source, Delta Initialization
I have couple of questions regarding data extraction.
1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
THANKSSSSSSSSSsHi,
1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
Once you create Datasource for A flat file extraction then it is file source system specific hence you cont change to Application table source Data source
In info package you can change the source as application server instead of desktop no need to change the DS
2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)
Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
Generic datasource nothing but we extracting data directly from the database table without any interface between the application/systems
4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
Correct
5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
Once you add the new field to structure(DS) you will get the data as on date onwards not historical data hence what is the concept of setup table ( delta records come from the Delta Que not from the setup table )
If you want histaric data to new field then you need to setp table deletion ...etc...
Hope it is clear..
Regards,
Satya
Maybe you are looking for
-
I just upgraded from the iPhone 4 to 4s. I had backed up the old phone backed up to iCloud. How do I restore that data to my new iphone? Even though I had photostream on, it never synched. I installed iCloud for the pc and can see the backup up i
-
How do I add a news caption in the corner?
In the iMovie '11 preview, it shows the news theme. And in one shot, there is a movie clip with another movie transposed in the corner with a headline... How do I do that?
-
Hi All, We upgraded our JDeveloper from 11.1.1.2.0 to 11.1..1.5.0. We have implemented adf security in our application. We are facing an issue with the login after deployment. The user is able to login successfully but an excception is thrown in the
-
My full version photoshop elements 12 suddenly became a trial version. Help needed
I have installed my full version photoshop elements 12 via my dvd installer from mediamarkt and after 2 days...i cannot launch photoshop elements and says that my trial version has expired. I tried to uninstall and install the software 3 times. The
-
What's the point of the canvas in KDE 4?
I'm digging into KDE 4, and I can't quite figure out the rational of a canvas with "collections of widgets", rather than just using virtual desktops. Could you guys enlighten me? I can understand it's usefulness in demoing KDE 4 features in the vid,