Generice Master Data - How ?

Hi All,
I have a need to create a generic master data. I have the code tested as an ABAP Program and it extracts exactly as it should. But how can I put together a generic data source, and this will be full load. Could anyone specify the steps to do it. I have copied the RSAX function group function ZRSAX_BIW_GET_MASTER_DATA. But not sure how to continue futher. There is no need for info package selection or anything. It is required to get the employee manager relation using ORGUNIT from employee. Any ideas or if you have a function module available please send.
Thanks,
Alex.

Please search forum for generic using FM. It has been discussed many times

Similar Messages

How to create generic master data datasource .

How to create generic master data datasource which utilises ALE change pointers for extraction of master data.

Hi,
For any master data lets say, Material Master, for this you need to create a view
based on your requirement by selecting one or more tables into your view and
keeping all the required fields in the view as viewfields and go to RS02 create
generic data source, select the view option as source and put the view, save and
activate, at the same time set the delta pointer as to whether Numericpointer/date/timestamp..this way you can create a generic DS then transfer the stru. and at the BW side replicate the source system..and so on..
Hope this helps..
Assign points if useful.
Need further info revert..
Cheers,
Pattan.

Delta for generic master data extractor

Hello,
Is it not possible to load deltas for a generic master data extractor?
I have created a generic extractor on R/3 table MEAN (EAN number assigned to material). I have also performed the init run which worked fine, but no deltas are being loaded.
Why is this?
Best regards,
Fredrik

hi,
its possible
how to generic delta
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
SAFETY DELTA
check these links
oss note 368739
Symptom
For the setup of summarization levels and summarization data in the Profitability Analysis a 'Safety delta' of half an hour is used. This means, the system only includes records which exist half hour already. You want to reduce this delta in order to get more current data in reporting.
Additional key words
Summarization levels, summarization data, safety delta, time stamp
Cause and prerequisites
The reason for the duration of these safety deltas are possible differences in the clocks on different application servers. If the delta is selected too short, when updating the summarization levels/data, records may not be taken into account. In particular the Account-based Profitability Analysis depends on the sufficient length of the delta, so that update processes which take longer do not cause inconsistencies. For the Costing-based Profitability Analysis a lock is set. If not active update processes exist, it fails and the update terminates.
Solution
The attached source code correction is not part of the standard system. With this change the safety delta is set from 30 to 5 minutes. You should only implement this, if exclusively the Costing-based Profitability Analysis is active in your system. If you also use Account-based Profitability Analysis we do not recommend the change for the above-mentioned reasons.
Generic delta safty intervals
oss note 392876
safety interval
0FI_GL_4 Safety Delta
Genric delta fro table
check this thread which already discussed about this topic
Generic Extractor - Delta
Shreya

I want to create generic master data attribute datasource on ANLA table .

hI,
I want to create generic master data attribute datasource on ANLA table .
and have to activate delta load.
Is it possible for delta upload on this table?
if it is possible then on which field i can create genric delta?

1.I want to fetch quantity ,inventory no , serial no.......
I have to enhance that datasource.....
2.else i can create master data for asset number using ANLA
I have opted 2nd option

How to maitain Deltas for generic master data source

Hi Friends,
I created a view using MARA and MARC table. This view fields maitained by attributes of ZWMAT_PLT Characteristic.
Now i faced the problem with deltas.
How i need to maitain delta for above view.
please give me solution for above problem.
Thanks & Regards,
Guna.

Hi,
If you have timestamp field in the view it is better use the Timestamp for the generic delta. Else try to include a timestamp field in the view.
Also check this forum.
How to set the delta for existing generic data source
Delta Updating a Master Data Infoobject
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Assign points if this is helpful
Rgs,
I.R.K

Generic master data update

hi all,
i have created a generic data source on Z table in r/3, replicate in BW and generic data source is available in BW. i have created a infosource and want to do flexible upload into 0Material data target which is assign under Cross applicant component( flexible master data update. i can not see the infoprovider under this application component in BWD system. 0material infoprovider is availble in BWQ and BWS system. i think some one remove this characteristics as a data target. i look into business content under cross application Master data flexible update , but can not find 0 material as a data target. please some one advise me how i can go after this.
Thank you
Qandeel

hi Martin,
Thank you for your quick response. i look into RSD1 infosource with direct update check box is enable, but its not enable for the" Character is data target/infoprovider.
i look into BWQ system 0material is enable for direct update and also a character is data target/ infoprovider. what i need to do to change the setting for 0 material and to enable this a infoprovider/ data target. some how settings get change in BWD system and its not available as a data target. please advise
Thank you
Qandeel

Using generic master Iviews - How change title on the preview??

Hi All,
We're using r/3 4.7, mss 60.1.20. I'm using the generic master iviews to create specidic java iviews. I'm using a sap query and the generic jsp's provided.
One of the examples provided is 'Communication'. So i copied it and put in my own sap query name. I put in a title in the Tile field but the title when i preview it is sitll 'Communication'. Does anyone know why this is or how i can change it?
Also is there a way of creating fresh iveiw based on master iviews? there doesn't appear to be an option for it in the iview template..
Thanks in advance,
Liz.

Thanks Linda. I understand that about the default settings. I was wanting to see different optimization speeds based on different internet connection speeds, not just 56kps. I was hoping there would be an option to select different download speeds so you can see how quickly a file would download based on 56kps verse a DSL line. I don't appreciate this restriction as most people are using high speed internet connections.

Whats the difference (Generic Master Data Source vs Transaction Data Sce)

Hi Gurus,
I have been wondering on whats the difference when creating GENERIC Data Sources:
1.) Transaction Data
2.) Master Data
Pls. dont give an answer like (A Master Data Generic Data Source is used to populate Master Data Info Objects and Transaction data Sources are used to populate ODS and CUBES.)
This definition is FALSE since I can use a "Master Data (Data Source)" to populate my ODS.
They only differ in Process Chain since the Action when loading data using Generic Masterdata Data Source is Attribute Change Run. Unlike when loading ODS using Transaction Data Source will use "Activate ODS Data".
Hope Somebody will clarify this...
--Jkyle

Hi Jkyle,
at the moment I think it is more or less a grouping information in BW and additionally a information for you, your users, ... what type of data is being loaded thru the datasource.
With grouping I mean just a type of information used for the list that opens if you'll assign a datasource to a infosource.
With type of data I mean some sort of classification of the data for a special application. I can imagine, that the same data can be used as transactional data as well as as master data depending on the application. A good example for this can be the header data. For some applications you have header (transactional) datasources providing a header counter and additonally you have the document number (basically the header information) with some attributes as master data.
May be there is a difference in the function modules that are called to extract the data, I am not sure about this.
Hope this help a bit.
regards
Siggi

Met issue in generic master data load

Hi Experts,
i met an issue which shows:System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE when updating data from PSA to infoobject.
the scenario is:
1.i have created a generic master datasource on VBAK table in R3, and only extract four fields to BW, they are AEDAT, VBELN, VKBUR, VKORG.
2. on BW side, created one infoobject s_saled(sales document) along with the other three characteristics as its attribute.
3. then create direct infosource to load data from R3 to the infoobject s_saled.
4. infopackage to load data
data load to PSA successfully, but met issue at the update step in the monitor. the error message is 'System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE'. it says that 6279 records are new but 0 changed.
but when i checked the infoobject, i found that the data are already loaded here.
can anyone give me some advice on this?
thanks in advance!
Eileen

hi eileen,
if u face any error you can simulate it in the monitor in the details tab.
as you say the master data is already loaded the purpose of your action is done.
and you didnt tell if this error persist in subsequent loads.
thank you.

MASTER DATA: HOW TO CHANGE SHIP TO INTO SOLD TO

Hi Gurus,
can you please help?
i need to change a ship to party into a sold to party. can you tell me how to do it?
thanks
C.

Hi,
If u want to change a SP to SH then use XD07.. to change the a/.c grp..

How to delete MRP view data after create in Material master data ?

Hi all ,
After user create a useless MRP view data in Material master data , how to remove it ?

Hi
Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
Give the necessary data that is needed for the view you want to delete.
Press and flag the view you want to delete.
Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
regards
Anand

How to Extract the Business content Master Data

Hello,
I activated Master Data Business content 0NOTIFICATION_ATTR and 0NOTIFICATION_TEXT on ECC6.0. these are belongs to "Quality Management Master Data"
How to fill the data right now it had 0 records
Do we need to fill the setup tables?
Thanks

hi roshan,
if u r loading from a flat file ,do follow thw below steps
Uploading of master data
Log on to your SAP
Transaction code RSA1u2014LEAD YOU TO MODELLING
1. Creation of Info Objects
u2022 In left panel select info object
u2022 Create info area
u2022 Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
u2022 Create new characteristics and key figures under respective catalogs according to the project requirement
u2022 Create required info objects and Activate.
2. Creation of Data Source
u2022 In the left panel select data sources
u2022 Create application component(AC)
u2022 Right click AC and create datasource
u2022 Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
u2022 In general tab give short, medium, and long description.
u2022 In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
u2022 In proposal tab load example data and verify it.
u2022 In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
u2022 Activate data source and read preview data under preview tab.
u2022 Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
u2022 In left panel select info provider
u2022 Select created info area and right click to select Insert Characteristics as info provider
u2022 Select required info object ( Ex : Employee ID)
u2022 Under that info object select attributes
u2022 Right click on attributes and select create transformation.
u2022 In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
u2022 Activate created transformation
u2022 Create Data transfer process (DTP) by right clicking the master data attributes
u2022 In extraction tab specify extraction mode ( full)
u2022 In update tab specify error handling ( request green)
u2022 Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
Regards
Ani

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

Map My Update Rule from a Master Data Attribute

Hello experts,
I haven't tried this scenario yet, hope you can help me, the Issue is this
I have 2 InfoObjects ZPSCHRCHY and 0PROFIT_CTR from InfoCube WBS cost and allocations I want both the InfoObjects to be mapped to 0PROFIT_CTR attribute of 0WBS_ELEMT master data object, I have tried the Master Data Attribute but only 0PROFIT_CTR is an attribute of the Master Data.how can I mapped ZPSCHRCHY and 0PROFIT_CTR to 0PROFIT_CTR?, Is creating a start routine for it must be used? Thank you very much
Regards and Thanks
Chris

PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TYPES:
BEGIN OF r_MD_WBS_ELEMENT,
 WBS_ELEMT like /BI0/PWBS_ELEMT-WBS_ELEMT,
 OBJVERS like /BI0/PWBS_ELEMT-OBJVERS,
 PROFIT_CTR like /BI0/PWBS_ELEMT-PROFIT_CTR,
END of r_MD_WBS_ELEMENT.
DATA: t_MD_WBS_ELEMENT TYPE STANDARD TABLE OF r_MD_WBS_ELEMENT,
 wa_MD_WBS_ELEMENT TYPE r_MD_WBS_ELEMENT.
$$ end of global - insert your declaration only before this line -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
 INCLUDE STRUCTURE /BIC/CS8ZPSG030.
TYPES:
 RECNO LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
 WITH HEADER LINE
 WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
 MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
 DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
REFRESH: t_MD_WBS_ELEMENT.
 SELECT WBS_ELEMT
 OBJVERS
 PROFIT_CTR
 INTO TABLE t_MD_WBS_ELEMENT
 FROM /BI0/PWBS_ELEMT
 FOR ALL ENTRIES IN DATA_PACKAGE
 WHERE WBS_ELEMT = DATA_PACKAGE-WBS_ELEMT.
 IF sy-subrc EQ 0.
 Do nothing
 ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.

What type of questions can i expect for master data?

hi,
am preparing for the interview. pls... let me know those questions for master data.
thanks to all

HI arun,
Pl. be clear on
what is master data, purpose, customer master data fields and material master data imp fields.
common distribution channels and divisions.
Org. master data. ( interms of one to many , many to many relations of org elements ).
condition master data
How master data is uploaded and maintained.
Hope it helps. Pl. reward if useful.
Thanks
Sadhu Kishore

Generice Master Data - How ?

Similar Messages

Maybe you are looking for