Genric extraction view

Hi
I have to create view by using VBAK, VBUK from this tables VBAK- Erdat,Ernam and VBUK- Rfgsk,BEstk are the fileds and i have a common filed VBELN in both for join condition .. I have followed steps like 1)se11- create view, given name and 2) table/join conditions - VBAK, VBUK and VBAK VBELN= VBUK VBELN 3) VIEW fileds- both table fields 4) selection what i have to give and What i have to write in RELATIONSHIPS... im getting error when i activate..
Regards

Hi ,
check whether the 'data element' given for all the tables in 'View fileds' the 3th step is correct .
the data elements are different from field names ,refer tables VBAK, and VBUK for defining the data elements .
the technical name of the data element in the view must match with that of the table otherwise the view will throw an error .
Also, selection conditions are not mandatory , you give selections only if you want to restrict the data to some records from the source .

Similar Messages

Please advise how to add new fields to Genric extracter

Hi,
We have Genric Extracter and need to modified with few new fields to it.
The fileds are comming from the table CE10016 Table.
How could i do that?.Please some one can help me on this.
Regards
Prasad

Hi Prasadrao,
Does ur generic extractor contains data only from CE10016 table,
ok then in this case u have to tcode RSO2-edit-click on append structure-name of append strucure will start from 'zz' - add ur required fields there, save and activate it-back- save and activate datasource- then go to customer exit- pick up ur project - pick up exit type 1 for transaction data - write ABAP code for the new fields by the business logic activate and test the data.
This is a simple procedure, if u expect data can be brought from some other table which can be linked, then there is another solution, but, before that u please put ur clear requirement.
Assign the points, if this is helping you.

Genric extracter desing

Hello,
I would like to create genric extracter out of the two tables BSEG,LIPS.
Among Two table ,which one i need to take a base table as per performace issue.
Bseg is huge table,that why i would lilke to use LIPS as base table in genric extracter.Both are belongs to item level data.Hence i would like to desing extracter as above mentioned scenario.My best concern is which field i need to take as delta enabled in the genric extracter?.
Please some one can advise me.

Hi,
this depends on your application. If it is more related to deliveries and changes to them, you need to take lips. Otherwise you better use bseg.
regards
Siggi

Where are the Data Extract Views

Hi,
can anyone answer me where I would find the Oracle Data Extract Views? I created several data extract views and I would need to query the data in those views.
I thought they would be in the Study Account but could not find the views there.
Kindest regards
Dennis

Sorry I just found why I did not see my views ... there was an error in the mapping table which resulted in an error when creating the view and therefore it did not show up ...
All my fault ...

Problems when creating an extraction view

Hello,
We have to create a transaction data datasource based on a transparent table ZTABLE. Unfortunatly, the error message R8359 occured :
"You tried to generate an extract structure with the template structure ZTABLE. This operation failed, because the template structure quantity fields or currency fields, for example, field ZFIELD refer to a different table"
As it has already been discussed in this forum, we created a view ZVIEW based on ZTABLE and the two others required tables.
But, eventually, we didn't get the same number of records entries with ZTABLE and ZVIEW. (probably a probleme with select left joint).
As I 'm trying to create the datasource on a E-proc environement (BBPCRM 3.0), I have only two options for extraction (RSO2) :
From database view (failed)
From SAP query , I need advices on how using this functionality :
Is it possible to define "left joins select" using sq02 ?
Any help would be highly appreciated.

Hi Ramos,
Pls. have a look at the following earlier posted forums...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d313238393133}.jspa
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/forums/sdn_jive_forums/thread{74687265616449443d3231343632}.jspa
Hope this helps...
Thanks,
Raj

Generic Extraction (views)

HI
I am involved in a project where there are 35 ztables now i am told to use use views as much as possible and extract the data. does any has any step by step doc to create views and what are the conditions on which i can join the tables.
appreciate any kind of help regarding the issue
k.mohan

try this:
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
also check this:
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
assign points if useful ***
Thanks,
Raj

Genric extraction

HI
I HAVE CREATED A GENERIC DATA SOURCE AND UPDATING THE DATA IN A CUBE ,THIS A BILLING DOCUMENT I AM TALKING ONLY PAID BILL TO BW.
WHICH OPATION SHOULD I SET FOR GENERIC EXTRACTION IN (RSO2)
PLEASE HELP.
REGARDS,
MANGRA

create a view in se11 on the two tables and in rso2 tcode select Extraction from view and give the name of the view.
*Assign points if helpful.

How to Extract & View Archived Accounting Document

Hi all,
My user has posted Diff Excise posting through Transaction code-J1IH, 3 years back. If I display this Excise JV through J1IH and click on Accounting Doc. Button, system shows message u201CDocument is not in database. Search documentu201D then if I select option u201CYESu201D following error message (Message no.) is displayed
u201CDocument XXXXXXX BBBB does not exist in fisc.year XXXX or has been archivedu201D
I checked Table u2013 J_1IPART2 for this Excise JV and noted down Accounting Doc. No. I tried to view this Acc Doc through Transaction code-FB03, but system gives following Error Message. F5 238
u201CDocument XXXXXXX BBBB does not exist in fisc.year XXXX or has been archivedu201D
Is this Accounting Doc is archived?
If yes, how to recover it back.
Rgds,
Swathi

Archived documents can be viewed with help of SAP data archiving tools ( eg: PBS archive add ons). Please check with your database team.
Thanks,
Kalyan

Getting Error while creating Genric Datasource

Hi,
I was try to create genric extracter where i was getting error
While creating view genric extracter where i am getting error "Entry A ZV_ZFRT does not exist in DD02L - check your entry".
My requirement is need to create extracter which is getting populated from three modules like SD,MM,FI/CO.From these three module i am using several tables and some of the tables don't have relation btween these tables as like foreign key and refrence key.
Which extracter i need to create as given scenario?
Does view will fullfill with my requirement or any other extracter.
Please some one can help me in this scenario.
Answer would be great appreciate.

Hi,
Rather than writing a program write a function module. Create a structure and include all the necessary fields in the structure. Then in the function module write the logic to extract the values for those fields. While creating the datasource specify the function module and structure name.
Refer this link:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope this helps.
PB

When we would create genric extractor on a infoset query

hi All,
we have infoset queries inour R/3 But very confused whether i should i go for generic with querry or genric with views.
Actually the scenario is I have the insfoset query on logical data base
I can create a generic extractor with view from the tables used by above infoset query. but there are structures in that infoset query .
so to create an generic extractor with view on a structure is not possible neither a function module is possible.
last option is creating generic extractor with view and enhancing the extractor with required fields form structure.
but i feel it would be very easy creating a generic with the same infoset querry
can u give me suggestion pls
All the answers would be appreciated by points
Thanks and Regards,
D

Hi...
SAP Query / InfoSet Query is a powerful tool for defining reports in the SAP
source systems and supports different forms of reporting. It allows users to define
and execute their own reports on data in the SAP system without any knowledge
of the ABAP programming language.
Reports are structured by entering texts and selecting fields and options in SAP
Query. The relevant fields can be selected more easily using InfoSets (before
release 4.6C, InfoSets were known as functional areas).
InfoSets are viewed as DataSources. These data sources can be used for extracting into SAP BW.
To create an InfoSet from the DataSource definition, perform these steps:
1. Fill out all the required entry fields (application component, descriptions).
2. Choose Extraction from Query.
3. Choose Save. A new screen is displayed.
4. Assign a name for your InfoSet and choose InfoSet Maintenance.
5. In the screen that follows, choose Create.
6. Select the data source (DB tables/views, joins, logical DB, and so on).
7. Define the field groups and assign the fields
An InfoSet is a special view of a dataset (logical database, table join, table,
sequential file) that is used by SAP Query as a data source. InfoSets, therefore,
determine the tables or fields in these tables that can be referenced by a report. In
most cases, InfoSets are based on logical databases.
SAP Query features a component for maintaining InfoSets. When you create an
InfoSet, a data source in an application system is selected. SAP Query is relevant
for the Business InformationWarehouse because it allows you to define the extract
structure by selecting fields in a logical database, table join or other datasets in the form of an InfoSet. In this way, you can use the generic data extraction function for master or transaction data from any InfoSet. When you do so, a query is created for an InfoSet that retrieves data and transfers it to the generic extractor.
InfoSets represent an additional, convenient data source for extracting data
generically. Logical databases in all SAP applications, table joins and further
datasets can be used as a data source for SAP BW.
Hope this would help u
with regards,
hari kv

Steps to Extract data from Source System

Hi,
I want to use business content object 0PA_C01. I have implemented it in the SAP BW system wanted to know how t=do I extract the data from R/3 system now to the cube. I am new to extraction so kindly help me out in this.
Thanks.

Hi SAPBILearner,
Genric Extraction Steps:
1) In R/3 side Create a Data source by use of RSO2 tcode
Select datasource type here, Give datasource name click create button
2) Specify description
Specify your table name
Choose the Application Component(like SD, MM, PP)
Click SAVE it takes to next screen
3) Choose the fields for visible and hidden
SAVE it.
Your datasource has been created
4) In RSA3 (Extract Checker) you can check your datasource it contains data or not
IN BW SIDE
1) First Replicate your datasource
2) Create InfoArea--> Info objects and all
3) Create InfoSource and assign this R/3 Datasource
4) Create info package to load data.
LO EXTRACTION STEPS
===================
1) In R/3 side, First delete the setup table (LBWG)
2) RSA5 --> transfer datasource
3) RSA6 --> Verify transferred datasource available or not
4) LBWE --> Maintain datasource
5) OLI*BW --> Fill setup table
6) RSA3 --> Extract checker
In BW side
1) Replicate datasorce
2) Asssign Infosource , activate datasource
3) Create infopackage to load data
Thanks
Mrityunjay

How to export a view

Hi,
I am working in 10g and i want to take the export of ony one view just like one table.Is it possible.
thank in advance.

Do you want to export the view definition or the data that would be selected from the view?
For the view definition, don't use dbms_metadata as it can choke if there are not spaces between commas and columns (among other things). If you go to www.optimaldba.com you can download a zip file containing (among other things) several calls to cleanly extract view definitions. (the file location is http://www.optimaldba.com/papers/RMOUG.zip)
If you are wanting to export the data and the view is simple, you might try using the QUERY clause for export

GoldenGate Extract Process will not read from redo log with manual help

Here is my issue.
I have GoldenGate replication successfully setup one-way from 1 Source to Many Targets. There is 1 source extract on the DB and many pumps that push the trail file data to the Targets. Replication does work but after manual help with starting up the Source Extract process.
If I execute the command:
GGSCI> alter extract <source extract name> begin now
GGSCI> view report <source extract name>
The extract starts and reads the source trail file but will not process data, I continually see in the ggserr.log file "OGG-01515: Positioning to begin time MMM DD, YYYY, HH:MM:SS" The date and time are irrevelant for this problem.
When I see this, I SQ*Plus into the database and look in the v$log table for the current log and sequence #.
I return to GGSCI and issue the following command:
GGSCI> alter extract <source extract name> thread 1 extseqno <sequence # from v$log query>
GGSCI> start <source extract name>
It then works as expected. Why is this so? I thought the alter extract <source extract name> begin now would do the same output.
We do use ASM but like I said when I issue the:
GGSCI> alter extract <source extract name> thread 1 extseqno <sequence # from v$log query>
It works like it should.
Very weird.
- Jason

Yes, supplemental logging is enabled on both the source and the targets, but why would supplemental logging on the targets have any affect on why the Source Extract on the source can't read from the source redo log?
This is not a RAC database, rather single-instance with one thread. Also, we are using DBLOGREADER functionality as it is an 11.2.0.3 database.
My issue is simply, when I start the source extract from being down, meaning it isn't running, I issue this command:
alter <source extract> begin now
start <source extract>
view report <source extract>
OGG-01515 Positioning to begin time <today's date and time> ie Mar 4, 2013, 3:26:39 PM. (this is repeated over and over and over)
If I perform a
info <source extract> detail---> I see the following:
Log Read Checkpoint Oracle Redo Logs 2013-03-04 15:26:39 Thread 1, Seqno 0, RBA 0 (why is it showing 0, becuase it can't read the redo, WHY NOT?)
Extract Source BEGIN END
Not Available <today's date> <today's date> (repeat....)
However, if I retreive the Redo Log number and I issue:
alter spe thread 1 extseqno (redo log sequence #)
start spe.
Then it works okay. I have to manually tell it what redo log to begin reading from. Why?
- Jason
Edited by: 924317 on Mar 4, 2013 9:03 AM

RSO2 extraction table

Hello all:
in SAP R/3 t.code RSO2 to create datasource, in the field EXTRACTION view/table.
is this the table in R/3 or what?
THx in advance.

Yes, its the R/3 table over which you are building your datasource

How to change F2 to F1 extraction method on datasource?

Hi, i copy the FM RSAX_BIW_GET_DATA and put it in datasource, but the extraction method assigned is always F2!!!
Why?
How to change F2 to F1 extraction type on datasource?
Thanks in advance!
Bye!
Ferdinando

Dear Lokesh and all other of the community,
I have now my solution for delta extraction of a generic data source. FM RSAX_BIW_GET_DATA_SIMPLE and as well RSAX_BIW_GET_DATA is not working for me, as they are not including delta function. My solution is based on FM RSVD_BW_GET_DELTA_DATA. Here are the steps:
1) Copy RSVD_BW_GET_DELTA_DATA and change to your purpose the ranges, the extract strukture, the z-extract-table (including field TSTMP) and the z-extract-view (not including field TSTMP).
2) Create a new generic datasource with RSO2. Choose extraction via FM and enter FM ZRSVD_BW_GET_DELTA_DATA and z-extract-table.
3) Change in table ROOSOURCE the EXMETHOD from F2 to F1, DELTA the from AIM to CUBE and the EXTRACTOR to the z-extract-view.
NOTE: You will now get the error message "Table is not existing" RJ403 in Transaction RSO2. - this has no effect. Use transaction RSA2 to check your settings.
This solution is working to:
first: do the initial load of all data -> after this the delta queue is created in RSA7
second: do the delta load of all new data -> based on the timestamp, means all data with timestamp after the last load, also changed and new data -> you see the last timestamp of delta transfer in tabel ROBWQTSTAT
Best greetings and thanks to Stephan Christian Müller and Lokesh Pattnayak,
Peggy

Genric extraction view

Similar Messages

Maybe you are looking for