Geo tagging video and split screen.

Does anyone know of how to geo tag a video and use this in a split screen with the video and a gps moving map. There is a system for PC's called Red Hen Systems, http://www.redhensystems.com/home, but nothing I can find for Apple that I can find. Any ideas?

Red Hen is a weird outfit. It's great software but weird. I have seen nothing similar for Quicktime.
We have a few copies of Red Hen's products in our environmental group. The GPS data is encoded onto an audio track as noise pulses and recovered by the software during viewing. It can then be superimposed over the video and burned in or used as a reference track. However, it's an audio track, not a streaming database so the map has to be synced to the video and you will probably do that by hand. That is, I know of no way to play a Red Hen-encoded video file and have a mapping application read the data in real time. Although, come to think of it, the data from the video should look just like a stream of GPS coordinates as far as the mapping software is concerned.
Sorry not to have any useful information for you. Please come back and close the thread if you figure something out. We'd all like to know how you solve this. With geotagging common on consumer still images, you'd think somebody would have a user friendly video-based system.
bogiesan

Similar Messages

  • Watching Movies: iPod to TV- black and white and split screen. Help?

    I have this cable: http://www.radioshack.com/product/index.jsp?productId=2994604
    As you can see, the chord colors on that cable are red, green, and white. The places where the chords go in on my DVD player are yellow, red, and white. As you can tell, they don't go up. I connected them so the audio works fine, but the movie shows up ONLY in black and white, and the screen is split right down the middle. On my iPod, the 'Video Setting' do not fix this. I also have the iPod Classic 80 GB, for reference.
    Help?

    Toggle between PAL and NTSC on video setting.

  • I've added songs and vedios to iTunes in my computer then I synchronise it with my iPad the problem came to the video that I couldn't show the videos and the screen became black

    I've added songs and vedios to iTunes in my computer then I synchronise it with my Ipad3 ..... For the songs it was OK but for the vedios I got a message that  some format are not supported then the screen became black with no video or sound ....how can I get back the vedios...I'm afraid to make reset to the iPad otherwise I'll loose all the applications and media.. Any ideas please .... Thanks

    First of all - depending upon how you define resetting the iPad - you will not lose anything. If you erase all contents and settings - then you will lose everything. Don't do that!
    If the videos are not in the correct format - launch iTunes on your computer. Click on one of the videos in your iTunes library in order to select it. Then go to Advanced>Create iPad or Apple TV version and see if the video will convert. Do the same for the other videos and then select those to sync again with the iPad.
    To get the videos app working again, first quit it completely and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If the videos app still doesn't work, try this.
    Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. when the movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

  • Moving views and split screen (AS3 games development issue)

    How do you move the workspace dynamically using AS3 (say in a platform game where the viewable area pans around the player)?
    One suggestion was to make everything move relative to the player:
    Is there a way to group all movie clips together, without creating and iterating through an array?
    For example there could be one holder movie clip which all viewable objects (apart from the background image) are attached to.
    Each of the objects could have x and y coordinates relative to the holder movie clip.
    I don't know how to do this though.
    Is there a better way (i.e. changing the x and y offset of the workspace dynamically)?
    Say if one was to make a multiplayer game where each level is over 4000x4000 px in dimensions.
    How do you split the screen with AS3 so that each player has their own view of the level?
    Thanks in advance for any replies

    After doing some further research I found that a genius named Bryan Heisey has invented a an opensource virtual camera using actionscript 3.
    I.e. a movie clip stores a snapshot of its current position as bitmap data which it draws on to the stage.
    After hours  of painful trial and error, I've modified the Actionscript 3 version of VCam, to be contained in an external actionscript file and to support split screen mode.
    I'm not sure if I've ironed out all the glitches out yet though as my trial version has expired and I'm still waiting for delivery of the registered version .
    I'll try and have a tutorial up and running in a week or 2...

  • Viewing pages side by side and split screen

    I'm using Pages 5.5.2 and I need to view pages side by side and also compare the content of pages by using a split screen - just like I can do in Word. Any help?

    Apple is very customer focused.
    Who that particular customer is, and whether they are actually using a Mac, we have not been able to discover.
    Rate/Review Pages 5.2.2 in the App Store.
    Peter

  • Freezing video and small screen

    Hi there! I am a beginner at editing and with using Premiere (I am using the cs4 version) right now... I have used a Canon 7d camera to shoot the video... I have already added my clips to the timeline. When they were in the Source (clip) screen I could see all the clips well, the entire image was visible and it wasn't freezing. However, as I added the videos and audios to the timeline and I want to playback the sequence on the screen on the right I cannot figure out how to make the video stop freezing from frame to frame and I also don't know why the image shown is only a small fraction of the actual frame (even though it is set on the Fit option). This problem does not occur on the source monitor screen...
    When I imported the clips in the beginning of the editing process I was using cs3 and the freezing problem did not occur, only the small frame situation...
    Hope you can help me... I'm sorry if I may have said any terms incorrectly, but, as I said, this is all new to me and I am trying to learn by myself!

    Welcome to the forum, and welcome to PrPro.
    As the Canon footage is pretty heavily-compressed H.264, let's start with the full specs. of your computer. This ARTICLE will give you tips, and then some.
    Also, here is an ARTICLE with some links that might be useful for that footage.
    Good luck,
    Hunt

  • Terminal.app and split-screen

    Am I the only one who used the split-screen terminal we had before Leopard? It was great for watching scrolling output since you could keep an eye on new traffic in the bottom of the screen while scrolling back and even searching in the top half of the screen.
    As far as I can tell, we no longer have a split-screen option in Terminal 2 in Leopard. If anyone knows away to enable it, please post it.

    While tabs are nice, I don't find them that much more useful than having separate terminal windows open. Especially since the only time I normally have more than one window open is to be able to cut and paste between them. The screen command provided most of what tabs offer (with the obvious lack of the tab buttons themselves). The biggest thing I found useful with split screens is for long running programs with a bunch of output. I used the split to examine the older output while watching the newest output at the bottom of the screen. For now I use old Terminal when I need to run a program like this and the new Terminal for everything else. I haven't noticed any problems from running them at the same time.

  • IPODS AND SPLIT SCREENS

    I have Premiere Elements 4.0.  Is there any way to be able to take music off Ipod's or CD's and put them on your computer in your project to edit with?  We have tried, but are not having any luck.  I know they need to me in MP3 form.  Is there anything to do with MP4 forms to get them on the computer and usuable?  Also, how do you create a split screen in projects?  Thanks!
    Kelly

    You can "rip" the Audio from a CD and bring that into PE to use as an Asset.
    If the Audio is already on a CD, then any ripping software can extract (rip) the files. I would work with PCM/WAV 44.1 KHz 16-bit files, and not MP3's, as there *can* be problems with the latter. PE will conform the 44.1 KHz material to 48 KHz 16-bit for you. This might take a second, when you Import the WAV file, so let it complete that operation. PE will generate a CFA and a PEK file for the Audio. The latter is the Waveform Display file. There will likely be a little blue progress bar at the lower-right edge of your GUI. The freeware Audio editor, Audacity, will do this for you. I happen to use Adobe Audition, as it offers much more power and control, but that would be overkill for most people's needs.
    Now, if the music is on an iPod, you'll want to go into iTunes (the copy that is synced to that iPod) and create a Playlist containing the music that you want. You will then burn that Playlist to a CD from within iTunes. This will yield the files in CDA format on the CD and you'll follow the instructions above. Though the music is going from the iTunes compressed format to CDA and then is ripped to WAV, you will NOT restore the file to an uncompressed form, though the file you'll get will be uncompressed. Once iTunes has compressed the music file initially, the "damage" has been done. It will never be as good as the source file that Apple created their m4p file from.
    If the music is just on an iPod and you do not have access to the synced iTunes program, there is a utility called iGadget, that will extract the music from the iPod. There is a free version, plus a paid version. I think that the main difference is that the free version does it one song at a time, where the paid version allows for multiple files to be off-loaded at once. I am not overly familiar with iGadget. You will sitll need a copy of iTunes to do the CD burning from a Playlist. IIRC, iTunes will allow up to 7 burns from a Playlist. With older versions of that program, one could create different Playlists to get around that 7 copy limit. I *think* that the newer versions plug that loophole, but am not sure.
    If at all possible, I'd not use MP3 format. Some of those files work, but some do not. Embedded "Album Art" has been cited as a possible cause for the failure of some of the MP3's. Also, MP3 is heavily compressed. Going back to as close to the source, as is possible, will yield better Audio.
    If I only have an MP3 file, I always convert to PCM/WAV 48KHz 16-bit, outside of my NLE program, i.e. PE, or PrPro. Again, I use Audition for this, but Audacity should work fine too. Remember, once compressed, you will never be able to fully restore the lost quality of the file. Just do not compress any more by going from an m4p to an MP3 format, as you will loose even more fidelity.
    There was a good step-by-step for working with iTunes, in the FAQ's section. However, I do not think that those have been restored, since the forum redo. My steps above are basically an abstract of the info in the FAQ's.
    Good luck,
    Hunt

  • Keyboard/mouse Focus 'Stuck' using reports and split screen

    With the screen split and arranged so that I have a report open on one side and a worksheet on the other, the keyboard/mouse focus gets 'stuck' on the report pane.
    using 1.5.1, xp pro/sp2 9ir2

    I too experience this issue and find it annoying. It reduces the utility of the reports functionality. I would like to be able to open a report or two to monitor some activity with the auto refresh, while continuting to code or work through other issues in either sql or pl/sql pane. Instead the focus keeps getting sucked back to a visible report panel.

  • Have audio but have not video and the screen is green on anything i try to watch

    when i try to watch any kind of video the screen is green, i can hear the sound but no video
    This question was solved.
    View Solution.

    When I try to watch anything on you tube or anything on facebook or any where on the web I can hear the sound but no video, what do i do next

  • Blank video and green screen back again when I post video on Facebook

    It doesn't offer that option. I have Windows 8.1 and this is the second time this happened. Support told me to go to tools, internet options and change Use software rendering instead rendering of GPU rendering. It worked. Now however, the setting is still the same and the video
    is blank and green on Facebook.

    Hi,
    Perform a clean install Flash Player may help:
      http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Fading Two sides of a video, and in between Two at the same time?

    I'm terribly sorry if this has been asked before, I did a search but I couldn't find a similar question so again, I apologize. 
    Could someone tell me how to do these things?:
    I have a split screen video (I know how to do that), and I want to fade one side out to black, and fade it back in throughout
    the video. 
    Also, if I have one video (not split screen, just one fullscreen video), fade it between two videos (so that you can see both videos at the same time for a bit, kind of "ghost like", and then it will eventually transition to the other video).  This effect is used in a lot of music videos, or Especially in a movie when time is passing by (like years) or there is a "flashback".  You can see two videos at the same time on top of one another.
    Again, sorry for the trouble, but if anyone has an answer thank you in advance!

    Animate the opacity property. Basic procedures here.
    Mylenium

  • Two effects - Reverse and split picture?

    I was wondering if anyone could explain to me how to do both or either of these effects. For all I know they may be simple to do, however I cannot figure it out.
    1. Reverse - How do you take a video and reverse it. Ex: A car driving forward and then switch to it going backwards the way it came.
    2. Split picture/video - How do you take a video and split it vertically into say 4 or 5 different segments? For this, I need to be able to show only 1 segment at a time and also all of them at once, so a little black line between each segment would be great if anyone could help with these.
    Thanks in advance!

    1. Highlight the clip, right-click on it and select SPEED. When the Speed window opens, check the reverse box.
    2. The easiest way is to create a matte in Photoshop in the configuration you need then layer the matte over the clip.
    -DH

  • Switching between video and photo

    How do i switch between taking a video and a picture? The camera seems to be pre-set for video and the screen selection for camera can't be selected, so how do i switch to picture?

    Try sliding the words up/down or left/right to select the various modes.

  • How to get split screen on Lenovo Yoga Pro 2?

    Hi! I recently purchased a lenovo pro 2 and I am loving it. Just one quick question, though. I know your able to have split screen (two completely separate windows on the same display, i.e have Google Chrome on the right half of the screen, and say Word on the other half of the screen). And I am not talking about Windows Snap Window feature.  I thought this was possible to do but have no clue on how to activate it. Thanks for any help in advance!
    Solved!
    Go to Solution.

    split screen only works on metro apps. you need to use the snap for desktop apps. You can run Metro IE and split screen it with MS Word.
    Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Maybe you are looking for

  • Reverse Cobol Copy Book - default directory

    Hi, We use the functionality "Reverse COBOL Copy Book" quite often to import metadata for flat files. When you have to select the .cbb file the default path to select the file is c: Is there a possibility to set the default path to any other director

  • Gif files placed in a jar file. Help to get these files.

    I have placed all the gif files in a jar file. added the gif.jar to the project in the required libraries of project properties. In the toolbar class I gave this. JButton btnNew = new JButton(new ImageIcon("new.gif")); and was expecting it to shpw th

  • Photoshop CS6 Pen tool ( Clipping Path )

    Hello all  what is new feature adding photoshop CS6 for Pen tool anybody know ?

  • Weird 10 Minute outtage

    Well that was weird just had my infinity die for a brief period of about 10 minutes. DSL light on modem went off, no connection at about 12.40am ten or so minutes later its reconnected on its own accord. Looking at... www.bt.com/help/servicestatus Sh

  • Recovery software download

    Hi,    I recently upgraded my laptop to windows 8 and in the process lost my recovery allocated portion on my hard drive, is there any way i could download a new one? Marc