Geographical map not zooming in properly.

I have two regions on my UI page R1 and R2. R1 has table containing all locations rows. R2 has geographical map displaying these locations on map. Both the components are sharing/using same data control. Now not all locations in R1 will have corresponding longitude and latitude values so it will be null for those locations. For geo map I have specified autozoomthemeid as theme id so that map should zoom in automatically to display all the locations on map to max zoom level.
But here its not zooming in to the max level. It is zooming to level to display only few of the locations. When I manually zoom out I can still see other locations on map. What could be possible reason for this? Is there any way I can make map component skip those locations which doesn't have corresponding longitude or latitude value.

yes in this case I get a following error message on log.
DVT-26016: theme LocationMapPointTheme cannot be displayed: no latitude data at row 1
And I cant see any locations on map. So In order to avoid this situation I am specifying NVL(AddressDEO.GEOMETRY.SDO_POINT.X,200) AS LOC_LONGITUDE,NVL(AddressDEO.GEOMETRY.SDO_POINT.Y,200) AS LOC_LATITUDE in vo attribute expression. Though this is not throwing any exceptions but map zoom level is not appropriate to see all the points on map.

Similar Messages

  • Geographical Map does not show up in Crystal Reports 2008 Viewer

    Hi,
    I'm facing a problem by creating maps with CR2008 SP2. If I export the report directly to an pdf or html file the map is shown properly. If I'm using the CR 2008 Viewer to open the .rtp file there's an error message like 'not supported object: geographical map'.
    Anyone else facing such problems?
    Thanks for help,
    Carsten

    Hi,
    Welcome to MSDN.
    I am afraid that this issue is related to third-party, and it is not supported in these forums.
    You could consider posting this issue in website of the publisher of that tool： http://scn.sap.com/community/crystal-reports.
    Thanks for your understanding.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Value mapping not working properly

    Hi All,
    I am using value mapping twice in same mapping program. But only 1 field is coming with value and other is taking same value from source payload, can you please tell me what can be issue here?
    Value mapping 1 -
    Context - http://sap.com/xi/XI
    SenderParty- SenderSchema
    ReceiverParty- ReceiverSchema
    Value Mapping table in ID -
    Value mapping at field 2 -
    Context - http://sap.com/xi/XI
    SenderParty1- SenderSchema1
    ReceiverParty2- ReceiverSchema2
    Value Mapping table in ID -
    Source payload -
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_VM_Send xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
       <Record>
          <Emp_ID>123</Emp_ID>
          <Name>rash</Name>
          <Surname>sumit</Surname>
          <Gender>Male</Gender>
         <Grade>E2</Grade>
      </Record>
    </ns0:MT_VM_Send>
    Target Payload -
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_VM_Receiver xmlns:ns0="http://xyz.com/Rashmi_CollectPatternDemo">
    <Record>
    <Emp_ID>123</Emp_ID>
    <Full_Name>rash sumit</Full_Name>
    <Designation>E2</Designation>
    <Gender>M</Gender>
    <Travel_Mode>Train</Travel_Mode>
    </Record>
    </ns0:MT_VM_Receiver>
    Here travel_mode is coming perfect, but designation is same as defined in source payload. Why here Value mapping not working???
    Thanks & regards,
    Rashmi Joshi

    Hi Rashmi,
    The problem would either be in cache update or your mapping. Please provide the sceenshot of mapping (after clicking the value mapping function).
    you can also choose the option to throw error in value mapping function, so it will throw error when value not found.
    regards,
    Harish

  • N82 Maps not loading after Memory format! HELP!

    Right
    My memory card started to cause the phone to hang, so formated it from phone.
    Reinstalled maps via maploader, but they dont load.
    Then reinstalled firmware, same ver, reinstalled maps, same.
    Factory reset phone, formated memory card. Ran maps once, downloaded maps via maploader, still no maps.
    Tried above with maps v2.0 also.
    Only way to make it work is restore original backup of memory card, made when i got phone. works, but is not the way is ment to be, looks like a few ppl are having similar issues, problem with map loader???

    I was having the same problem, but it's working now .. hope this helps
    Firstly, make sure you go to the app. manager on your phone (usually found in the applications folder) and delete the nokia maps 2 from there.
    Also reformat your memory card.
    Then do what needtogetfit posted but I've made it step by step for ppl like me LOL):
    Connect your phone to your computer using the "data transfer" NOT PC Suite. A folder should show up, if not, go to 'my computer' and it will be there as "memory card" or whatever you have named your card.
    Open it and you will see a few files in there. Make sure you delete the folder "cities" or "diskcashe" if it is still there and also delete a file called qf-file. (for some reason they seem to stay there even after a reformat etc and that's what seems to stop the maps from being seen properly)
    I also made sure I had 'show hidden files' checked in the tools/folder options/view so I could see if they were hidden or not.
    I then installed the nokia maps from my computer onto my phone via PC suite.
    Open up your maps (it may take awhile cause it's starting a new directory structure on your memory card to replace the ones you deleted)... and allow it to connect to the internet briefly so you can get satellite coverage. (dont panic, you will still only see a green page, but if you zoom out you should at least now see your country etc)
    Once you've done that, close and connect your phone to your computer using the "data transfer" and open up the map loader program and download your countries maps + voices you may want.
    Once done, go back to your maps and you will find that all the streets will be showing once again!!
    I hope this helps, it worked for me and I tried it on two different reformatted cards that weren't working before this.

  • GPS does not zoom to my current location

    Hi All
    I need some help here!!!
    When i go to my Nokia Maps it does not zoom in to my current location. It somehow zoom in to my home address. Don't know how i got that right. Please can anyone help me to set up my GPS properly.
    Im blonde!!! joke
    PLEASE HELP!!!
    Chantell

    Hi chantell
    Go to Menu > Tools > Settings > GPS data > Position > Options > Positioning Settings > Methods:
    Is there currently a RED TICK against Integrated GPS and Network based?
    With memory card in phone go outside hold phone with keypad slider open at 45 degrees, don't cover the "#" key as GPS antenna is below this.
    Go to Menu > Tools > Settings > GPS data > Position > Open > Options > Satellite status > Open:
    You need a minimum of three solid black bars, but usually get four for lock-on position
    If empty rectangles haven't turned to solid bars by 20 mins your GPS isn't working!
    Now that you've determined GPS is working Open Maps application - at first there is RED CROSS on satellite icon at bottom right - this disappears when GPS locked-on
    Close application and you see "saving data" above globe on screen. This creates folder structure on memory card that Maploader requires.
    It is now a lot faster to put microSD into card reader on PC and when you run Maploader it should find card and allow you to proceed to download map.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • View in edit window not getting updatet properly

    Hello
    I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
    Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
    I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
    Does anyone have similar problems with the view not getting updated properly?
    I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
    Greetings

    Hello again
    I made a movie of this behavior:
    https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
    It shouldn't look like that, right?
    Greetings

  • Interface Mapping Not Found in Integration Directory

    Hey guys!
    I'am getting this error in the test configuration part of the integration directory:
    "Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
    I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
    BTW,  I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
    Regards,
    Glenn

    The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
    Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
    When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
    :P

  • Interface mapping not found at runtime.

    Hi all,
    For the idoc to idoc scenario i was getting an error
    Runtime error
    Unable to read the payload from the message object
    I have cleared the sld cache and also checked in SXI_CACHE to check the mapping at runtime .I m unable to understand where the problem lies.
    Can anyone help?
    Regards,
    Shrita.

    Hi,
    Please check you message first properly all conditions supporting or not.Is message is having any exceptional chars , and Check whether your are using Async or Synch communication , respectivly the sender and receiver  communication mode supporting both sides. and check your J2EE is working fine or not, Check your interface is having the module processors in sender side/receiver side is yes , those are working fine or not , those are properly imported properly or not.
    these diffects may not effect the activation of components.
    Also check your receiver Business system is working fine or not
    And also check your receiver agreement is configured,receiver determination and interface determination all are refered same business systems or not.
    ,please see the following threads
    Error RCVR_DETERMINATION
    No Receiver Determination
    Re: NO_RECEIVER_CASE_ASYNC
    XPATH and RECEIVER DETERMINATION
    XI 3.0 No receiver could be determined
    Regards
    Chilla..

  • ID-Error: Interface Mapping Not Found

    Hi,
    While doing the test configuration in Integration Directory, i'm getting the below errors, after pasting in the payload area & after executing step by step:
    Sender Agreement
    Also, once when i'm adding message interface to interface mapping in Integration Repository, i'm getting the error as:
    "Message Interface does not exits on any software components"
    afterwards this error not came once again.
    Plsssssssss help me to resolve the same.
    Regards,
    Balaji

    Hi Balaji,
    try to do a cache refresh,using tools>>clear SLD cache.
    also see if message mapping and interface mapping have been created properly and activated.
    Check the following:
    --> The o/b and i/b interfaces in the mapping program are same as used to create the interface det. object.
    --> THe Interface mapping shld be active...
    Refer to the topics at the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/ef761a5ecfb1418b79896e10fe4c57/content.htm
    Reward points if this helps
    Regards
    Vani.

  • Mapping not sufficiently defined FILE TO IDOC(HRMD_A.HRMD_A06) scenerio

    Hello friends,
                         In message mapping part from File to IDOC. I am doing mapping of infotype 14 message type with the corresponding idoc. But when I activate it I am getting the following error:
    Activation of the change list canceled Check result for Message Mapping MM_INF14_LS | urn:tcs:test:  Mapping not sufficiently defined
    As far as I know I have properly mapped the fields which I am picking from the file. But I am not very sure what to do woth few fields in the IDOC which appear to be red in message mapping
                               Kindly give me the solution.
    Regards,
    Lokesh

    Thanx guys...I tried changing the description of other mappings whch were already activated. And thn I tried activating I got the same error:
    Activation of the change list canceled Check result for Message Mapping MM_02IT | urn:tcs:payroll:  Starting compilation  Source code has syntax error:  java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
    what possibly can go wrong? Is there any way to activate it.
    Looking forward for ur reply.
    Regards,
    Lokesh

  • Maps not working in my Neo after ICS update

    If I open Maps in my phone. It does not load the map properly even though I am in Wifi and later on it says Maps not responding, do you want to wait or quit!!
    Is anybody else also having this problem?
    Yesterday my Wifi was also behaving wierd. It was not able to establish proper connection with my router but finally when I turned off my phone and swithced it on, it got rectified.
    Regards
    Ramanath

    Go to Play Store, search for Google Maps and see if there's any updates available. If there is, install it and then start Maps again and check if the problem is gone.
    If there is not update available, go to Settings > Apps > Manage apps > Google Maps > Uninstall updates. If 'Uninstall updates' is grayed out, tap on clear data instead and then try the app again.
    Let me know.
    What do you think about this forum? Let us know by doing this short survey.

  • Why is the map not displaying correctly on "find my phone"  I am getting large grid squares on the map

    why is the map not displaying correctly on "find my phone"  on my computer.  I am getting large grid squares on the map.  I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..

    Welcome to Apple Support Communities
    It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment

  • How to use geographical maps in OBI EE

    Hi
    pls. guide me to use geographical map in OBIEE say for latim America ... I want to show sales amount in each city/state and if each city show good sales amount, the city will have green color. Is it possible to do this?

    i believe that the best way and the most easy...(you have to manage a lot of things.....and unfortuantely i do not know your full scenario...) is
    Google Maps + navigation...
    Check this blog...
    --->http://obiee101.blogspot.com/search/label/MAPS (also the comments)
    what i mean is, you have to represent the area you want.........
    read and play with the google map api**
    it has almost the requirements you want....
    then when a user click on a sub - area of your state....you can represent him some informations and a link (navigation) to either a more specific report or just a url.
    I tried to make a simple j2ee with "manual way" , many pictures - polygons-links..... and i gave up....
    Here for any help...
    i hope i helped....
    http://greekoraclebi.blogspot.com/
    ///////////////////////////////////////

  • Camera, Browser & Maps Not Working

    Hi,
    It been since yesterday my Z10 camera, broser & maps not working.
    Whenever I click the camera icon, it is not even opening.
    Browser icon had changed, it turned to a triangle square & circle.
    Can anyone help me out.
    Thanks,
    Chris

    The update may not have loaded properly, you can reload this way:   http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB34045&sliceId=2&docType=kc&noCo​...
    Or do a Security Wipe (Reset to Factory Settings) this way: 
    http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?externalId=KB33591&sliceId=2&docType=kc&noCo​...
    Please read both carefully !

  • OBIEE 11g: Fact table does not have  a properly defined primary key

    Hi,
    We have two fact tables and two dimension tables.
    We have joined the tables like
    D1-->F1
    D2-->F2
    D1-->D2
    We dont have any hieracies.
    It is throwing error in consistency check,
    [nQSError: 15001] Could not load navigation space for subject area ABC.
    [nQSError: 15033] Logical table Fact1 does not have a properly defined primary key.
    It is not like STAR Schema, its like snowflake schema. How to define primary key for fact table.
    Thanks.

    Hi,
    My suggestion would be bring both the facts to the same logical table sources and have a single fact table in the BMM layer joined with multiple dimensions.
    Build a dimension hierarchy for the dimensions and then in the content logical layer mapping, map the dimensions to the fact tables with detailed level/Total
    Refer the below link-
    http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
    Hope this help's
    Thanks,
    Satya

Maybe you are looking for